godotengine
/
godot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
godot/doc/classes/SkeletonModification2DCCDIK...

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

134 lines
6.9 KiB
XML
Raw Normal View History

New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<?xml version="1.0" encoding="UTF-8" ?>
2D and 3D Skeleton modification docs, and small fixes. Mark SkeletonModificationStack3D and related as deprecated. Mark local bone override and axis functions deprecated in Skeleton3D api. Fix array property glitch in SkeletonModificationStack2D Mark SkeletonModificationStack2D and related APIs as experimental. Mark SkeletonIK3D as deprecated.
2022-09-14 02:59:17 +00:00
<class name="SkeletonModification2DCCDIK" inherits="SkeletonModification2D" is_experimental="true" version="4.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="../class.xsd">
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<brief_description>
A modification that uses CCDIK to manipulate a series of bones to reach a target in 2D.
</brief_description>
<description>
doc: Fix style inconsistencies for `[b]Note:[/b]` paragraphs And fix up formatting not supported by makerst.
2021-10-05 12:24:34 +00:00
This [SkeletonModification2D] uses an algorithm called Cyclic Coordinate Descent Inverse Kinematics, or CCDIK, to manipulate a chain of bones in a [Skeleton2D] so it reaches a defined target.
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
CCDIK works by rotating a set of bones, typically called a "bone chain", on a single axis. Each bone is rotated to face the target from the tip (by default), which over a chain of bones allow it to rotate properly to reach the target. Because the bones only rotate on a single axis, CCDIK [i]can[/i] look more robotic than other IK solvers.
[b]Note:[/b] The CCDIK modifier has [code]ccdik_joints[/code], which are the data objects that hold the data for each joint in the CCDIK chain. This is different from a bone! CCDIK joints hold the data needed for each bone in the bone chain used by CCDIK.
CCDIK also fully supports angle constraints, allowing for more control over how a solution is met.
</description>
<tutorials>
</tutorials>
<methods>
<method name="get_ccdik_joint_bone2d_node" qualifiers="const">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="NodePath" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Returns the [Bone2D] node assigned to the CCDIK joint at [param joint_idx].
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="get_ccdik_joint_bone_index" qualifiers="const">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="int" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Returns the index of the [Bone2D] node assigned to the CCDIK joint at [param joint_idx].
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="get_ccdik_joint_constraint_angle_invert" qualifiers="const">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="bool" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Returns whether the CCDIK joint at [param joint_idx] uses an inverted joint constraint. See [method set_ccdik_joint_constraint_angle_invert] for details.
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="get_ccdik_joint_constraint_angle_max" qualifiers="const">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="float" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Returns the maximum angle constraint for the joint at [param joint_idx].
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="get_ccdik_joint_constraint_angle_min" qualifiers="const">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="float" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Returns the minimum angle constraint for the joint at [param joint_idx].
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="get_ccdik_joint_enable_constraint" qualifiers="const">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="bool" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Returns whether angle constraints on the CCDIK joint at [param joint_idx] are enabled.
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="get_ccdik_joint_rotate_from_joint" qualifiers="const">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="bool" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Returns whether the joint at [param joint_idx] is set to rotate from the joint, [code]true[/code], or to rotate from the tip, [code]false[/code]. The default is to rotate from the tip.
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="set_ccdik_joint_bone2d_node">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="void" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
<param index="1" name="bone2d_nodepath" type="NodePath" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Sets the [Bone2D] node assigned to the CCDIK joint at [param joint_idx].
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="set_ccdik_joint_bone_index">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="void" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
<param index="1" name="bone_idx" type="int" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Sets the bone index, [param bone_idx], of the CCDIK joint at [param joint_idx]. When possible, this will also update the [code]bone2d_node[/code] of the CCDIK joint based on data provided by the linked skeleton.
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="set_ccdik_joint_constraint_angle_invert">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="void" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
<param index="1" name="invert" type="bool" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Sets whether the CCDIK joint at [param joint_idx] uses an inverted joint constraint.
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
An inverted joint constraint only constraints the CCDIK joint to the angles [i]outside of[/i] the inputted minimum and maximum angles. For this reason, it is referred to as an inverted joint constraint, as it constraints the joint to the outside of the inputted values.
</description>
</method>
<method name="set_ccdik_joint_constraint_angle_max">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="void" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
<param index="1" name="angle_max" type="float" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Sets the maximum angle constraint for the joint at [param joint_idx].
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="set_ccdik_joint_constraint_angle_min">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="void" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
<param index="1" name="angle_min" type="float" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Sets the minimum angle constraint for the joint at [param joint_idx].
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="set_ccdik_joint_enable_constraint">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="void" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
<param index="1" name="enable_constraint" type="bool" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Determines whether angle constraints on the CCDIK joint at [param joint_idx] are enabled. When [code]true[/code], constraints will be enabled and taken into account when solving.
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
<method name="set_ccdik_joint_rotate_from_joint">
doc: Use self-closing tags for `return` and `argument` For the time being we don't support writing a description for those, preferring having all details in the method's description. Using self-closing tags saves half the lines, and prevents contributors from thinking that they should write the argument or return documentation there.
2021-07-30 13:28:05 +00:00
<return type="void" />
Rename the argument tag to param in XML documentation
2022-08-06 18:11:48 +00:00
<param index="0" name="joint_idx" type="int" />
<param index="1" name="rotate_from_joint" type="bool" />
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
<description>
[doc] Use "param" instead of "code" to refer to parameters #3
2022-08-10 02:00:19 +00:00
Sets whether the joint at [param joint_idx] is set to rotate from the joint, [code]true[/code], or to rotate from the tip, [code]false[/code].
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</description>
</method>
</methods>
<members>
<member name="ccdik_data_chain_length" type="int" setter="set_ccdik_data_chain_length" getter="get_ccdik_data_chain_length" default="0">
[doc] Fix grammar in class docs: amount vs. number Number is used for things that can be counted (discrete items - think "integer" in this context). Also fixes a couple of awkward phrases.
2022-08-17 22:08:09 +00:00
The number of CCDIK joints in the CCDIK modification.
New and improved IK system for Skeleton2D This PR and commit adds a new IK system for 2D with the Skeleton2D node that adds several new IK solvers, a way to control bones in a Skeleton2D node similar to that in Skeleton3D. It also adds additional changes and functionality. This work was sponsored by GSoC 2020 and TwistedTwigleg. Full list of changes: * Adds a SkeletonModifier2D resource * This resource is the base where all IK code is written and executed * Has a function for clamping angles, since it is so commonly used * Modifiers are unique when duplicated so it works with instancing * Adds a SkeletonModifierStack2D resource * This resource manages a series of SkeletonModification2Ds * This is what the Skeleton2D directly interfaces with to make IK possible * Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK * Each modification is in its own file * There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together * Adds a PhysicalBone2D node * Works similar to the PhysicalBone3D node, but uses a RigidBody2D node * Changes to Skeleton2D listed below: * Skeleton2D now holds a single SkeletonModificationStack2D for IK * Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D * Changes to Bone2D listed below: * The default_length property has been changed to length. Length is the length of the bone to its child bone node * New bone_angle property, which is the angle the bone has to its first child bone node * Bone2D caches its transform when not modified by IK for IK interpolation purposes * Bone2D draws its own editor gizmo, though this is stated to change in the future * Changes to CanvasItemEditor listed below: * Bone2D gizmo drawing code removed * The 2D IK code is removed. Now Bone2D is the only bone system for 2D * Transform2D now has a looking_at function for rotating to face a position * Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE * These notifications only are called in the editor right before and after saving a scene * Needed for not saving the IK position when executing IK in the editor * Documentation for all the changes listed above.
2020-08-03 18:02:24 +00:00
</member>
<member name="target_nodepath" type="NodePath" setter="set_target_node" getter="get_target_node" default="NodePath(&quot;&quot;)">
The NodePath to the node that is the target for the CCDIK modification. This node is what the CCDIK chain will attempt to rotate the bone chain to.
</member>
<member name="tip_nodepath" type="NodePath" setter="set_tip_node" getter="get_tip_node" default="NodePath(&quot;&quot;)">
The end position of the CCDIK chain. Typically, this should be a child of a [Bone2D] node attached to the final [Bone2D] in the CCDIK chain.
</member>
</members>
</class>