Rigid body node. This node is used for placing rigid bodies in the scene. It can contain a number of shapes, and also shift mode between regular Rigid body, Kinematic, Character or Static.
Called during physics processing, allowing you to read and safely modify the simulation state for the object. By default it works in addition to the usual physics behavior, but [method set_use_custom_integrator] allows you to disable the default behavior and do fully custom force integration for a body.
</description>
</method>
<methodname="apply_impulse">
<returntype="void">
</return>
<argumentindex="0"name="pos"type="Vector3">
</argument>
<argumentindex="1"name="impulse"type="Vector3">
</argument>
<description>
Apply a positioned impulse (which will be affected by the body mass and shape). This is the equivalent of hitting a billiard ball with a cue: a force that is applied once, and only once. Both the impulse and the offset from the body origin are in global coordinates.
</description>
</method>
<methodname="get_angular_damp"qualifiers="const">
<returntype="float">
</return>
<description>
Return the current body angular damp. Default is -1.
Return a list of the bodies colliding with this one. By default, number of max contacts reported is at 0 , see [method set_max_contacts_reported] to increase it.
</description>
</method>
<methodname="get_friction"qualifiers="const">
<returntype="float">
</return>
<description>
Return the current body friction, from 0 (frictionless) to 1 (max friction).
Set the angular damp for this body. Default of -1, cannot be less than -1. If this value is different from -1, any angular damp derived from the world or areas will be overridden.
Set the body angular velocity. Can be used sporadically, but [b]DON'T SET THIS IN EVERY FRAME[/b], because physics may be running in another thread and definitely runs at a different granularity. Use [method _integrate_forces] as your process loop if you want to have precise control of the body state.
Set the axis lock of the body, from the AXIS_LOCK_* enum. Axis lock stops the body from moving along the specified axis(X/Y/Z) and rotating along the other two axes.
Set the body ability to fall asleep when not moving. This saves an enormous amount of processor time when there are plenty of rigid bodies (non static) in a scene.
Sleeping bodies are not affected by forces until a collision or an [method apply_impulse] / [method set_applied_force] wakes them up. Until then, they behave like a static body.
</description>
</method>
<methodname="set_contact_monitor">
<returntype="void">
</return>
<argumentindex="0"name="enabled"type="bool">
</argument>
<description>
Enable contact monitoring. This allows the body to emit signals when it collides with another.
</description>
</method>
<methodname="set_friction">
<returntype="void">
</return>
<argumentindex="0"name="friction"type="float">
</argument>
<description>
Set the body friction, from 0 (frictionless) to 1 (max friction).
Set the gravity factor. This factor multiplies gravity intensity just for this body.
</description>
</method>
<methodname="set_linear_damp">
<returntype="void">
</return>
<argumentindex="0"name="linear_damp"type="float">
</argument>
<description>
Set the linear damp for this body. Default of -1, cannot be less than -1. If this value is different from -1, any linear damp derived from the world or areas will be overridden.
Set the body linear velocity. Can be used sporadically, but [b]DON'T SET THIS IN EVERY FRAME[/b], because physics may be running in another thread and definitely runs at a different granularity. Use [method _integrate_forces] as your process loop if you want to have precise control of the body state.
</description>
</method>
<methodname="set_mass">
<returntype="void">
</return>
<argumentindex="0"name="mass"type="float">
</argument>
<description>
Set the body mass.
</description>
</method>
<methodname="set_max_contacts_reported">
<returntype="void">
</return>
<argumentindex="0"name="amount"type="int">
</argument>
<description>
Set the maximum contacts to report. Bodies can keep a log of the contacts with other bodies, this is enabled by setting the maximum amount of contacts reported to a number greater than 0.
Set the body mode, from the MODE_* enum. This allows to change to a static body or a character body.
</description>
</method>
<methodname="set_sleeping">
<returntype="void">
</return>
<argumentindex="0"name="sleeping"type="bool">
</argument>
<description>
Set whether a body is sleeping or not. Sleeping bodies are not affected by forces until a collision or an [method apply_impulse] wakes them up. Until then, they behave like a static body.
Set the continuous collision detection mode from the enum CCD_MODE_*.
Continuous collision detection tries to predict where a moving body will collide, instead of moving it and correcting its movement if it collided. The first is more precise, and misses less impacts by small, fast-moving objects. The second is faster to compute, but can miss small, fast-moving objects.
</description>
</method>
<methodname="set_use_custom_integrator">
<returntype="void">
</return>
<argumentindex="0"name="enable"type="bool">
</argument>
<description>
Pass true to disable the internal force integration (like gravity or air friction) for this body. Other than collision response, the body will only move as determined by the [method _integrate_forces] function, if defined.
</description>
</method>
<methodname="set_weight">
<returntype="void">
</return>
<argumentindex="0"name="weight"type="float">
</argument>
<description>
Set the body weight given standard earth-weight (gravity 9.8).
If true, the Rigid body will no longer calculate forces when there is no movement and will act as a static body. It will wake up when other forces are applied through other collisions or when the 'apply_impulse' method is used.
The maximum contacts to report. Bodies can keep a log of the contacts with other bodies, this is enabled by setting the maximum amount of contacts reported to a number greater than 0.
Continuous collision detection tries to predict where a moving body will collide, instead of moving it and correcting its movement if it collided. The first is more precise, and misses less impacts by small, fast-moving objects. The second is faster to compute, but can miss small, fast-moving objects.
If true, internal force integration will be disabled (like gravity or air friction) for this body. Other than collision response, the body will only move as determined by the [method _integrate_forces] function, if defined.
The 'gravity_scale' for this Rigid body will be multiplied by the global 3d gravity setting found in "Project > Project Settings > Physics > 3d". A value of 1 will be normal gravity, 2 will apply double gravity, and 0.5 will apply half gravity to this object.
The linear damp for this body. Default of -1, cannot be less than -1. If this value is different from -1, any linear damp derived from the world or areas will be overridden.
The body linear velocity. Can be used sporadically, but [b]DON'T SET THIS IN EVERY FRAME[/b], because physics may run in another thread and runs at a different granularity. Use [method _integrate_forces] as your process loop for precise control of the body state.
The body weight given standard earth-weight (gravity 9.8).
</member>
</members>
<signals>
<signalname="body_entered">
<argumentindex="0"name="body"type="Object">
</argument>
<description>
Emitted when a body enters into contact with this one. Contact monitor and contacts reported must be enabled for this to work.
</description>
</signal>
<signalname="body_exited">
<argumentindex="0"name="body"type="Object">
</argument>
<description>
Emitted when a body shape exits contact with this one. Contact monitor and contacts reported must be enabled for this to work.
</description>
</signal>
<signalname="body_shape_entered">
<argumentindex="0"name="body_id"type="int">
</argument>
<argumentindex="1"name="body"type="Object">
</argument>
<argumentindex="2"name="body_shape"type="int">
</argument>
<argumentindex="3"name="local_shape"type="int">
</argument>
<description>
Emitted when a body enters into contact with this one. Contact monitor and contacts reported must be enabled for this to work.
This signal not only receives the body that collided with this one, but also its [RID] (body_id), the shape index from the colliding body (body_shape), and the shape index from this body (local_shape) the other body collided with.
</description>
</signal>
<signalname="body_shape_exited">
<argumentindex="0"name="body_id"type="int">
</argument>
<argumentindex="1"name="body"type="Object">
</argument>
<argumentindex="2"name="body_shape"type="int">
</argument>
<argumentindex="3"name="local_shape"type="int">
</argument>
<description>
Emitted when a body shape exits contact with this one. Contact monitor and contacts reported must be enabled for this to work.
This signal not only receives the body that stopped colliding with this one, but also its [RID] (body_id), the shape index from the colliding body (body_shape), and the shape index from this body (local_shape) the other body stopped colliding with.
</description>
</signal>
<signalname="sleeping_state_changed">
<description>
Emitted when the body changes its sleeping state. Either by sleeping or waking up.
</description>
</signal>
</signals>
<constants>
<constantname="MODE_STATIC"value="1">
Static mode. The body behaves like a [StaticBody], and can only move by user code.
</constant>
<constantname="MODE_KINEMATIC"value="3">
Kinematic body. The body behaves like a [KinematicBody], and can only move by user code.
</constant>
<constantname="MODE_RIGID"value="0">
Rigid body. This is the "natural" state of a rigid body. It is affected by forces, and can move, rotate, and be affected by user code.
</constant>
<constantname="MODE_CHARACTER"value="2">
Character body. This behaves like a rigid body, but can not rotate.
