This node implements simulated 2D physics. You do not control a RigidBody2D directly. Instead you apply forces to it (gravity, impulses, etc.) and the physics simulation calculates the resulting movement based on its mass, friction, and other physical properties.
A RigidBody2D has 4 behavior modes (see [member mode]):
- [b]Rigid[/b]: The body behaves as a physical object. It collides with other bodies and responds to forces applied to it. This is the default mode.
- [b]Static[/b]: The body behaves like a [StaticBody2D] and does not move.
- [b]Character[/b]: Similar to [code]Rigid[/code] mode, but the body can not rotate.
- [b]Kinematic[/b]: The body behaves like a [KinematicBody2D], and must be moved by code.
[b]Note:[/b] You should not change a RigidBody2D's [code]position[/code] or [code]linear_velocity[/code] every frame or even very often. If you need to directly affect the body's state, use [method _integrate_forces], which allows you to directly access the physics state.
If you need to override the default physics behavior, you can write a custom force integration. See [member custom_integrator].
Allows you to read and safely modify the simulation state for the object. Use this instead of [Node._physics_process] if you need to directly change the body's [code]position[/code] or other physics properties. By default it works in addition to the usual physics behavior, but [member custom_integrator] allows you to disable the default behavior and write custom force integration for a body.
Applies a positioned impulse to the body (which will be affected by the body mass and shape). This is the equivalent of hitting a billiard ball with a cue: a force that is applied instantaneously. Both the impulse and the offset from the body origin are in global coordinates.
Returns a list of the bodies colliding with this one. Use [member contacts_reported] to set the maximum number reported. You must also set [member contact_monitor] to [code]true[/code].
Returns the body's moment of inertia, which is computed automatically from the body's mass and assigned [Shape2D]\ s during the physics frame. Note that it will not yet have a value in the [code]_ready()[/code] function.
Set the body angular velocity. Can be used sporadically, but [b]DON'T SET THIS IN EVERY FRAME[/b], because physics may be running in another thread and definitely runs at a different granularity. Use [method _integrate_forces] as your process loop if you want to have precise control of the body state.
Sets the body's velocity on the given axis. The velocity in the given vector axis will be set as the given vector length. This is useful for jumping behavior.
Set the body ability to fall asleep when not moving. This saves an enormous amount of processor time when there are plenty of rigid bodies (non static) in a scene.
Sleeping bodies are not affected by forces until a collision or an [method apply_impulse] / [method set_applied_force] wakes them up. Until then, they behave like a static body.
</description>
</method>
<methodname="set_contact_monitor">
<returntype="void">
</return>
<argumentindex="0"name="enabled"type="bool">
</argument>
<description>
Enable contact monitoring. This allows the body to emit signals when it collides with another.
Set the continuous collision detection mode from the enum CCD_MODE_*.
Continuous collision detection tries to predict where a moving body will collide, instead of moving it and correcting its movement if it collided. The first is more precise, and misses less impacts by small, fast-moving objects. The second is faster to compute, but can miss small, fast-moving objects.
</description>
</method>
<methodname="set_friction">
<returntype="void">
</return>
<argumentindex="0"name="friction"type="float">
</argument>
<description>
Set the body friction, from 0 (frictionless) to 1 (full friction).
Set the gravity factor. This factor multiplies gravity intensity just for this body.
</description>
</method>
<methodname="set_inertia">
<returntype="void">
</return>
<argumentindex="0"name="inertia"type="float">
</argument>
<description>
Set the body's moment of inertia. This is like mass, but for rotation: it determines how much torque it takes to rotate the body. The moment of inertia is usually computed automatically from the mass and the shapes, but this function allows you to set a custom value. Set 0 (or negative) inertia to return to automatically computing it.
</description>
</method>
<methodname="set_linear_damp">
<returntype="void">
</return>
<argumentindex="0"name="linear_damp"type="float">
</argument>
<description>
Set the linear damp for this body. If this value is different from -1, any linear damp derived from the world or areas will be overridden.
Set the body linear velocity. Can be used sporadically, but [b]DON'T SET THIS IN EVERY FRAME[/b], because physics may be running in another thread and definitely runs at a different granularity. Use [method _integrate_forces] as your process loop if you want to have precise control of the body state.
</description>
</method>
<methodname="set_mass">
<returntype="void">
</return>
<argumentindex="0"name="mass"type="float">
</argument>
<description>
Set the body mass.
</description>
</method>
<methodname="set_max_contacts_reported">
<returntype="void">
</return>
<argumentindex="0"name="amount"type="int">
</argument>
<description>
Set the maximum contacts to report. Bodies can keep a log of the contacts with other bodies, this is enabled by setting the maximum amount of contacts reported to a number greater than 0.
Set the body mode, from the MODE_* enum. This allows to change to a static body or a character body.
</description>
</method>
<methodname="set_sleeping">
<returntype="void">
</return>
<argumentindex="0"name="sleeping"type="bool">
</argument>
<description>
Set whether a body is sleeping or not. Sleeping bodies are not affected by forces until a collision or an [method apply_impulse] / [method set_applied_force] wakes them up. Until then, they behave like a static body.
</description>
</method>
<methodname="set_use_custom_integrator">
<returntype="void">
</return>
<argumentindex="0"name="enable"type="bool">
</argument>
<description>
Pass true to disable the internal force integration (like gravity or air friction) for this body. Other than collision response, the body will only move as determined by the [method _integrate_forces] function, if defined.
</description>
</method>
<methodname="set_weight">
<returntype="void">
</return>
<argumentindex="0"name="weight"type="float">
</argument>
<description>
Set the body weight given standard earth-weight (gravity 9.8). Not really useful for 2D since most measures for this node are in pixels.
Returns [code]true[/code] if a collision would result from moving in the given vector. [code]margin[/code] increases the size of the shapes involved in the collision detection, and [code]result[/code] is an object of type [Physics2DTestMotionResult], which contains additional information about the collision (should there be one).
Damps the body's [member angular_velocity]. If [code]-1[/code] the body will use the "Default Angular Damp" in "Project > Project Settings > Physics > 2d". Default value: [code]-1[/code].
If [code]true[/code] the body will not calculate forces and will act as a static body if there is no movement. The body will wake up when other forces are applied via collisions or by using [method apply_impulse] or [method add_force]. Default value: [code]true[/code].
If [code]true[/code] the body will emit signals when it collides with another RigidBody2D. See also [member contacts_reported]. Default value: [code]false[/code].
Continuous collision detection tries to predict where a moving body will collide instead of moving it and correcting its movement after collision. Continuous collision detection is slower, but more precise and misses fewer collisions with small, fast-moving objects. Raycasting and shapecasting methods are available. See [code]CCD_MODE_[/code] constants for details.
If [code]true[/code] internal force integration is disabled for this body. Aside from collision response, the body will only move as determined by the [method _integrate_forces] function.
Multiplies the gravity applied to the body. The body's gravity is calculated from the "Default Gravity" value in "Project > Project Settings > Physics > 2d" and/or any additional gravity vector applied by [Area2D]\s. Default value: [code]1[/code].
Damps the body's [member linear_velocity]. If [code]-1[/code] the body will use the "Default Linear Damp" in "Project > Project Settings > Physics > 2d". Default value: [code]-1[/code].
If [code]true[/code] the body is sleeping and will not calculate forces until woken up by a collision or by using [method apply_impulse] or [method add_force].
Emitted when a body enters into contact with this one. [member contact_monitor] must be [code]true[/code] and [member contacts_reported] greater than [code]0[/code].
Emitted when a body exits contact with this one. [member contact_monitor] must be [code]true[/code] and [member contacts_reported] greater than [code]0[/code].
Emitted when a body enters into contact with this one. Reports colliding shape information. See [CollisionObject2D] for shape index information. [member contact_monitor] must be [code]true[/code] and [member contacts_reported] greater than [code]0[/code].
Emitted when a body shape exits contact with this one. Reports colliding shape information. See [CollisionObject2D] for shape index information. [member contact_monitor] must be [code]true[/code] and [member contacts_reported] greater than [code]0[/code].
