Native image datatype. Contains image data, which can be converted to a [Texture], and several functions to interact with it. The maximum width and height for an [Image] are [constant MAX_WIDTH] and [constant MAX_HEIGHT].
Alpha-blends [code]src_rect[/code] from [code]src[/code] image to this image using [code]mask[/code] image at coordinates [code]dst[/code]. Alpha channels are required for both [code]src[/code] and [code]mask[/code]. [code]dst[/code] pixels and [code]src[/code] pixels will blend if the corresponding mask pixel's alpha value is not 0. [code]src[/code] image and [code]mask[/code] image [b]must[/b] have the same size (width and height) but they can have different formats.
Blits [code]src_rect[/code] area from [code]src[/code] image to this image at the coordinates given by [code]dst[/code]. [code]src[/code] pixel is copied onto [code]dst[/code] if the corresponding [code]mask[/code] pixel's alpha value is not 0. [code]src[/code] image and [code]mask[/code] image [b]must[/b] have the same size (width and height) but they can have different formats.
Compresses the image to use less memory. Can not directly access pixel data while the image is compressed. Returns error if the chosen compression mode is not available. See [code]COMPRESS_*[/code] constants.
Creates an empty image of given size and format. See [code]FORMAT_*[/code] constants. If [code]use_mipmaps[/code] is [code]true[/code] then generate mipmaps for this image. See the [method generate_mipmaps].
Creates a new image of given size and format. See [code]FORMAT_*[/code] constants. Fills the image with the given raw data. If [code]use_mipmaps[/code] is [code]true[/code] then generate mipmaps for this image. See the [method generate_mipmaps].
Crops the image to the given [code]width[/code] and [code]height[/code]. If the specified size is larger than the current size, the extra area is filled with black pixels.
Returns ALPHA_BLEND if the image has data for alpha values. Returns ALPHA_BIT if all the alpha values are below a certain threshold or the maximum value. Returns ALPHA_NONE if no data for alpha values is found.
Generates mipmaps for the image. Mipmaps are pre-calculated and lower resolution copies of the image. Mipmaps are automatically used if the image needs to be scaled down when rendered. This improves image quality and the performance of the rendering. Returns an error if the image is compressed, in a custom format or if the image's width/height is 0.
Returns the color of the pixel at [code](x, y)[/code] if the image is locked. If the image is unlocked it always returns a [Color] with the value [code](0, 0, 0, 1.0)[/code].
Returns [code]true[/code] if all the image's pixels have an alpha value of 0. Returns [code]false[/code] if any pixel has an alpha value higher than 0.
Converts the image's data to represent coordinates on a 3D plane. This is used when the image represents a normalmap. A normalmap can add lots of detail to a 3D surface without increasing the polygon count.
Resizes the image to the given [code]width[/code] and [code]height[/code]. New pixels are calculated using [code]interpolation[/code]. See [code]interpolation[/code] constants.
Resizes the image to the nearest power of 2 for the width and height. If [code]square[/code] is [code]true[/code] then set width and height to be the same.
The [url=https://en.wikipedia.org/wiki/S3_Texture_Compression]S3TC[/url] texture format that uses Block Compression 1, and is the smallest variation of S3TC, only providing 1 bit of alpha and color data being premultiplied with alpha.
[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space conversion is performed.
The [url=https://en.wikipedia.org/wiki/S3_Texture_Compression]S3TC[/url] texture format that uses Block Compression 2, and color data is interpreted as not having been premultiplied by alpha. Well suited for images with sharp alpha transitions between translucent and opaque areas.
[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space conversion is performed.
The [url=https://en.wikipedia.org/wiki/S3_Texture_Compression]S3TC[/url] texture format also known as Block Compression 3 or BC3 that contains 64 bits of alpha channel data followed by 64 bits of DXT1-encoded color data. Color data is not premultiplied by alpha, same as DXT3. DXT5 generally produces superior results for transparent gradients compared to DXT3.
[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space conversion is performed.
Texture format that uses [url=https://www.khronos.org/opengl/wiki/Red_Green_Texture_Compression]Red Green Texture Compression[/url], normalizing the red channel data using the same compression algorithm that DXT5 uses for the alpha channel.
Texture format that uses [url=https://www.khronos.org/opengl/wiki/Red_Green_Texture_Compression]Red Green Texture Compression[/url], normalizing the red and green channel data using the same compression algorithm that DXT5 uses for the alpha channel.
Texture format that uses [url=https://www.khronos.org/opengl/wiki/BPTC_Texture_Compression]BPTC[/url] compression with unsigned normalized RGBA components.
[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space conversion is performed.
Texture format that uses [url=https://www.khronos.org/opengl/wiki/BPTC_Texture_Compression]BPTC[/url] compression with signed floating-point RGB components.
Texture format that uses [url=https://www.khronos.org/opengl/wiki/BPTC_Texture_Compression]BPTC[/url] compression with unsigned floating-point RGB components.
Texture format used on PowerVR-supported mobile platforms, uses 2-bit color depth with no alpha. More information can be found [url=https://en.wikipedia.org/wiki/PVRTC]here[/url].
[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space conversion is performed.
[url=https://en.wikipedia.org/wiki/Ericsson_Texture_Compression#ETC1]Ericsson Texture Compression format 1[/url], also referred to as "ETC1", and is part of the OpenGL ES graphics standard. This format cannot store an alpha channel.
[url=https://en.wikipedia.org/wiki/Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression format 2[/url] ([code]R11_EAC[/code] variant), which provides one channel of unsigned data.
[url=https://en.wikipedia.org/wiki/Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression format 2[/url] ([code]SIGNED_R11_EAC[/code] variant), which provides one channel of signed data.
[url=https://en.wikipedia.org/wiki/Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression format 2[/url] ([code]RG11_EAC[/code] variant), which provides two channels of unsigned data.
[url=https://en.wikipedia.org/wiki/Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression format 2[/url] ([code]SIGNED_RG11_EAC[/code] variant), which provides two channels of signed data.
[url=https://en.wikipedia.org/wiki/Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression format 2[/url] ([code]RGB8[/code] variant), which is a follow-up of ETC1 and compresses RGB888 data.
[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space conversion is performed.
[url=https://en.wikipedia.org/wiki/Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression format 2[/url] ([code]RGBA8[/code]variant), which compresses RGBA8888 data with full alpha support.
[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space conversion is performed.
[url=https://en.wikipedia.org/wiki/Ericsson_Texture_Compression#ETC2_and_EAC]Ericsson Texture Compression format 2[/url] ([code]RGB8_PUNCHTHROUGH_ALPHA1[/code] variant), which compresses RGBA data to make alpha either fully transparent or fully opaque.
[b]Note:[/b] When creating an [ImageTexture], an sRGB to linear color space conversion is performed.
Performs bilinear interpolation. If the image is resized, it will be blurry. This mode is faster than [constant INTERPOLATE_CUBIC], but it results in lower quality.
Performs cubic interpolation. If the image is resized, it will be blurry. This mode often gives better results compared to [constant INTERPOLATE_BILINEAR], at the cost of being slower.
Performs bilinear separately on the two most-suited mipmap levels, then linearly interpolates between them.
It's slower than [constant INTERPOLATE_BILINEAR], but produces higher-quality results with much less aliasing artifacts.
If the image does not have mipmaps, they will be generated and used internally, but no mipmaps will be generated on the resulting image.
[b]Note:[/b] If you intend to scale multiple copies of the original image, it's better to call [method generate_mipmaps]] on it in advance, to avoid wasting processing power in generating them again and again.
