When moving KinematicBody2D from one scene to another and not freeing
the old scene, the first call to move_and_slide() in the new scene will
generate an error because KinematicBody2D keeps internaly a
RID on_floor_body of a body resource in the old scene which no more has
a space assigned.
To fix this, on_floor_body is set to empty RID in response to
NOTIFICATION_ENTER_TREE notification of KinematicBody2D and
KinematicBody. Also all other data related to move_and_slide() is reset:
floor, ceiling, wall flags, colliders vector, floor_velocity.
This fixes#31416.
This was a regression in 3.1 and later from the new inspector, where
PROPERTY_HINT_SPRITE_FRAME was not fully re-implemented. It's meant to
be a normal PROPERTY_HINT_RANGE which also automatically increments its
value when keyed in the animation player.
To avoid code duplication, I made the frames properties use the actual
PROPERTY_HINT_RANGE and introduced a PROPERTY_USAGE_KEYING_INCREMENTS
usage flag instead.
Also added support for SCons project-absolute paths (starting with #) and
warning about duplicates in add_source_files(), and fixed
default_controller_mappings.gen.cpp being included twice after first build
due to *.cpp globbing.
Part of #30270.
With the default camera node settings, this makes directional shadows
look consistent between the editor and the running project.
The original issue occurs because the editor camera defaults to a
Z-far value of 500, whereas the Camera node defaults to a Z-far
value of 100. Since the directional shadow maximum distance is clamped
to the Z-far value, it caused the running project's effective shadow
distance to be lower compared to the editor (100 instead of 200).
This partially addresses #13575.
- Refer to properties explicitly when possible
- When multiple warnings are returned, always separate them by one
blank line to make them easier to distinguish
- Improve grammar and formatting
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
The original shader code uses a phase (ratio from 0 to 1 for the particle
lifetime) for the randomness ratio computations, and this code was ported
over but converted to time computations.
The seeding/cycle logic was thus invalid, so we're going back to phase
for these computations, thus fixing the previous non-working time/emission
randomness property.
Part of #29692. Follow-up to #26859.
The tangential acceleration for both CPUParticles2D and CPUParticles had been
badly converted from their GPU counterpart (ParticlesMaterial).
This fixes it and ensures that both GPU and CPU particles behave the same with
regard to tangential acceleration.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
As mentioned in
https://github.com/godotengine/godot/pull/26897#issuecomment-491178089
the look-at scaling issue solved by PR #26897 happens also in another
look-at method.
Spatial::look_at_from_position() also does not have same input checking
Spatial::look_at() has. Therefore, I fixed it too at same time.
* Expose EditorNavigationMeshGenerator as an engine singleton so users
can generate navmesehes from `tool` scripts.
* Add support for generating navmeshes from static colliders. All
collision shapes are supported except for Plane (since Plane is an
infinite collider and navmeshes need to have finite geometry).
* When using static colliders as a geometry source, a layer mask can be
specified to ignore certain colliders.
* Don't rely on global transform. It still should give the exact same
results but allows for building navmeshes on nodes that are not in the
tree (useful in `tool` scripts).
* Update navigation gizmos after every new bake.
This work has been kindly sponsored by IMVU.
It always normalized basis after look_at() computation.
Now it applies previous scale back, in order to avoid
distortions when global scale was different of (1,1,1).
fix#10003 and #19000
Related to #17924
Adds the ability to directly add disabled shapes to a collision object. Before this commit a shape has always been assumed to be enabled and had to be disabled in an extra step.
The bake mode property of lights previously didn't affect GI probes.
This change makes the GI probe ignore lights that have their bake mode
set to disabled.
Made AudioFrame and Vector2 equivalent for casting.
Added ability to obtain the playback object from stream players.
Added ability to obtain effect instance from audio server.
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
FBX support and MMD (pmx) support.
Normals, Albedo, Metallic, and Roughness through Arnold 5 Materials for Maya FBX.
Maya FBX Stingray PBS support.
Importing FBX static meshes work.
Importing FBX animations is a work in progress.
Supports FBX 4 bone influence animations.
Supports FBX blend shapes.
MMDs do not have an associated animation import yet.
Sponsored by IMVU Inc.
Adds `FALLTHROUGH` macro to specify when a fallthrough is intentional.
Can be replaced by `[[fallthrough]]` if/when we switch to C++17.
The warning is now enabled by default for GCC on `extra` warnings level
(part of GCC's `-Wextra`). It's not enabled in Clang's `-Wextra` yet,
but we could enable it manually once we switch to C++11. There's no
equivalent feature in MSVC for now.
Fixes#26135.
1. Consider 'own_world' as well as 'world' to stop propagating enter/exit world notifications.
2. Clean & fix handling of camera currency.
This fixes some random crashes and error logs in the editor; namely
- when enabling/disabling own world in a Viewport;
- when switching back from a subscene displayed into a main scene's Viewport;
- when exiting the editor after any of them;
- memory corruption (can that explain certain other seemingly unrelated crash reports?).
This also fixes situations where a Viewport and its main Camera get out of sync about which World is relevant to them.
With this change finally one can use compound collisions (like those created
by Gridmaps) without serious performance issues. The previous KinematicBody
code for Bullet was practically doing a whole bunch of unnecessary
calculations. Gridmaps with fairly large octant sizes (in my case 32) can get
up to 10000x speedup with this change (literally!). I expect the FPS demo to
get a fair speedup as well.
List of fixes and improvements:
- Fixed a general bug in move_and_slide that affects both GodotPhysics and
Bullet, where ray shapes would be ignored unless the stop_on_slope parameter
is disabled. Not sure where that came from, but looking at the 2D physics
code it was obvious there's a difference.
- Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision
tests against individual shapes of compound shapes. This is crucial to get
good performance with Gridmaps and in general improves the performance
whenever a KinematicBody collides with compound collision shapes.
- Added code to the broadphase collision detection code used by the Bullet
module for KinematicBodies to also do broadphase on the sub-shapes of
compound collision shapes. This is possible thanks to the dynamic AABB
tree that was previously disabled and it's the change that provides the
biggest performance boost.
- Now broadphase test is only done once per KinematicBody in Bullet instead of
once per each of its shapes which was completely unnecessary.
- Fixed the way how the ray separation results are populated in Bullet which
was completely broken previously, overwriting previous results and similar
non-sense.
- Fixed ray shapes for good now. Previously the margin set in the editor was
not respected at all, and the KinematicBody code for ray separation was
complete bogus, thus all previous attempts to fix it were mislead.
- Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was
used in the ray result array.
There are a whole set of other problems with the KinematicBody code of Bullet
which cost performance and may cause unexpected behavior, but those are not
addressed in this change (need to keep it "simple").
Not sure whether this fixes any outstanding Github issues but I wouldn't be
surprised.
The intent was to avoid creating a physics override to set a default value
that doesn't make a difference, but as #22406 shows it can be necessary to
set the default value *back* after an override was created to set a non-default
value.
Fixes#22406.
The bone index being passed to the visual server is not using the process order and results in incorrect skin deformation if the calculated process order is different from the unordered bones Vector.
Incidentally, this never showed when I exported rigged characters from blender using the Better Collada exporter. This bug only materialised when experimenting with the glTF pipeline from Maya.
Adding angular and linear springs param to PhysicalBone joint type JOINT_TYPE_6DOF,
using new 6DOF feautres implemented in sdfgeoff/godot@e149327.
Typo correction lenear_equilibrium_point to linear_equilibrium_point.
Remove animation loop from ParticlesMaterial and move it to
SpatialMaterial for 3D particles and Particles2D for the 2D case.
Added animation to CPUParticles2D as well as the "Convert to
CPUParticles2D" to the PAarticles2D menu.
- moved new infinite_inertia argument of move_and_slide and
move_and_slide_with_snap in KinematicBody and KinematicBody2D to the
end if not already there. This makes the order of arguments consistent
and should keep projects from 3.0 compatible as this argument did not
exist in 3.0. Docs updated accordingly.
- renamed max_bounces to max_slides for consistency. Docs updated
accordingly.
- the argument infinite_inertia in test_move is now optional, as it is
in every other movement related method. This closes#22829.
Fixes the following GCC 7 warnings:
```
core/cowdata.h:269:47: warning: 'alloc_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/error_macros.h:163:26: warning: 'nearest_point' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1579:5: warning: 'colormap_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1582:12: warning: 'size_height' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1590:23: warning: 'size_width' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1599:29: warning: 'pixel_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/math/face3.cpp:207:15: warning: 'tri_max' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/math/face3.cpp:209:15: warning: 'tri_min' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_scene_gles3.cpp:665:22: warning: 'best_used_frame' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_storage_gles3.cpp:865:27: warning: 'blit_target' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_storage_gles3.cpp:980:29: warning: 'blit_target' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::frag_id' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::id' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::vert_id' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/plugins/script_editor_plugin.cpp:1980:31: warning: 'se' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/scene_tree_dock.cpp:840:30: warning: 'new_node' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'a1' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'lll' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'lul' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4260:9: warning: 'a2' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4261:9: warning: 'a3' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4265:3: warning: 'enable_lin' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4294:3: warning: 'enable_ang' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4311:34: warning: 'll' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4311:34: warning: 'ul' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/3d/voxel_light_baker.cpp:1655:47: warning: 'cone_dirs' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/3d/voxel_light_baker.cpp:1656:73: warning: 'cone_weights' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/gui/texture_progress.cpp:181:6: warning: 'cp' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/gui/texture_progress.cpp:181:6: warning: 'cq' may be used uninitialized in this function [-Wmaybe-uninitialized]
servers/physics/shape_sw.cpp:1056:19: warning: 'support_max' may be used uninitialized in this function [-Wmaybe-uninitialized]
```
Fixes the following GCC 8 warnings:
```
core/image.cpp:730:44: warning: 'mip1_weight' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:293:20: warning: 'mip2' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:293:20: warning: 'mip1' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/audio_stream_preview.cpp:58:19: warning: 'vmax' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/audio_stream_preview.cpp:85:19: warning: 'vmin' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/editor_themes.cpp:306:53: warning: 'preset_contrast' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/plugins/animation_blend_space_2d_editor.cpp:459:27: warning: 'prev_idx' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/plugins/animation_blend_space_2d_editor.cpp:443:27: warning: 'prev_idx' may be used uninitialized in this function [-Wmaybe-uninitialized]
main/tests/test_oa_hash_map.cpp:57:29: warning: 'value' may be used uninitialized in this function [-Wmaybe-uninitialized]
modules/csg/csg.cpp:764:40: warning: 'max_angle' may be used uninitialized in this function [-Wmaybe-uninitialized]
modules/csg/csg_shape.cpp:1945:3: warning: 'face_count' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/3d/voxel_light_baker.cpp:1593:8: warning: 'cone_aperture' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/3d/voxel_light_baker.cpp:1592:6: warning: 'cone_dir_count' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/animation/animation_blend_space_2d.cpp:471:8: warning: 'mind' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/os/memory.cpp:94: warning: ignoring #pragma clang diagnostic [-Wunknown-pragmas]
core/os/memory.cpp:95: warning: ignoring #pragma clang diagnostic [-Wunknown-pragmas]
core/os/memory.cpp:98: warning: ignoring #pragma clang diagnostic [-Wunknown-pragmas]
```
Fixes the following Clang 7 warnings:
```
editor/editor_help.h:123:7: warning: 'EditorHelpIndex::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/editor_help.h:95:7: warning: 'EditorHelpSearch::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/editor_help.h:96:7: warning: 'EditorHelpSearch::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/plugins/curve_editor_plugin.h:141:15: warning: 'CurvePreviewGenerator::generate' hides overloaded virtual function [-Woverloaded-virtual]
editor/plugins/script_editor_plugin.h:70:7: warning: 'ScriptEditorQuickOpen::popup' hides overloaded virtual function [-Woverloaded-virtual]
editor/quick_open.h:69:7: warning: 'EditorQuickOpen::popup' hides overloaded virtual function [-Woverloaded-virtual]
main/tests/test_io.cpp:53:15: warning: 'TestIO::TestMainLoop::input_event' hides overloaded virtual function [-Woverloaded-virtual]
servers/audio/effects/audio_effect_record.h:69:15: warning: 'AudioEffectRecordInstance::process_silence' hides overloaded virtual function [-Woverloaded-virtual]
core/os/memory.h:119:2: warning: destructor called on non-final 'ContextGL_X11' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'EditorScriptCodeCompletionCache' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'Engine' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'PhysicalBone::JointData' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'VisualServerScene' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
core/os/memory.h:119:2: warning: destructor called on non-final 'VisualServerViewport' that has virtual functions but non-virtual destructor [-Wdelete-non-virtual-dtor]
```
Fixes the following GCC 5 warnings:
```
core/io/zip_io.h:128:26: warning: 'zlib_filefunc_def zipio_create_io_from_file(FileAccess**)' defined but not used [-Wunused-function]
core/script_debugger_remote.cpp:110:17: warning: 'ObjectID safe_get_instance_id(const Variant&)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:103:12: warning: 'int _socket_create(IP::Type&, int, int)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:45:15: warning: 'size_t _set_sockaddr(sockaddr_storage*, const IP_Address&, int, IP::Type)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:76:15: warning: 'size_t _set_listen_sockaddr(sockaddr_storage*, int, IP::Type, IP_Address)' defined but not used [-Wunused-function]
editor/editor_fonts.cpp:40:24: warning: 'Ref<BitmapFont> make_font(int, int, int, int, const int*, const Ref<Texture>&)' defined but not used [-Wunused-function]
editor/editor_themes.cpp:85:26: warning: 'Ref<StyleBoxFlat> change_border_color(Ref<StyleBoxFlat>, Color)' defined but not used [-Wunused-function]
editor/import/editor_import_collada.cpp:493:13: warning: 'void _generate_normals(const PoolVector<int>&, const PoolVector<Vector3>&, PoolVector<Vector3>&)' defined but not used [-Wunused-function]
editor/import/editor_import_collada.cpp:524:13: warning: 'void _generate_tangents_and_binormals(const PoolVector<int>&, const PoolVector<Vector3>&, const PoolVector<Vector3>&, const PoolVector<Vector3>&, PoolVector<float>&)' defined but not used [-Wunused-function]
editor/pvrtc_compress.cpp:118:13: warning: 'void _compress_etc(Image*)' defined but not used [-Wunused-function]
modules/etc/image_etc.cpp:89:13: warning: 'void _decompress_etc1(Image*)' defined but not used [-Wunused-function]
modules/etc/image_etc.cpp:93:13: warning: 'void _decompress_etc2(Image*)' defined but not used [-Wunused-function]
modules/gdscript/editor/gdscript_highlighter.cpp:46:13: warning: 'bool _is_whitespace(CharType)' defined but not used [-Wunused-function]
scene/2d/cpu_particles_2d.cpp:510:14: warning: 'float rand_from_seed_m1_p1(uint32_t&)' defined but not used [-Wunused-function]
scene/3d/cpu_particles.cpp:474:14: warning: 'float rand_from_seed_m1_p1(uint32_t&)' defined but not used [-Wunused-function]
scene/resources/default_theme/default_theme.cpp:123:20: warning: 'Ref<Shader> make_shader(const char*, const char*, const char*)' defined but not used [-Wunused-function]
scene/resources/default_theme/default_theme.cpp:130:24: warning: 'Ref<BitmapFont> make_font(int, int, int, int, const int*, const Ref<Texture>&)' defined but not used [-Wunused-function]
```
Had to split `core/io/zip_io.h` into header and .cpp file without 'static' keyword.
Not fixed yet (static definition in header used in some files but not all):
```
modules/websocket/lws_helper.h:111:13: warning: 'void _lws_make_protocols(void*, int (*)(lws*, lws_callback_reasons, void*, void*, size_t), PoolVector<String>, _LWSRef**)' defined but not used [-Wunused-function]
```
Also fixed a couple other warnings missed in previous commits.
Fixes the following GCC 5 warnings:
```
core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder]
core/object.h:192:15: warning: 'PropertyInfo MethodInfo::return_val' [-Wreorder]
core/object.cpp:278:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder]
core/script_debugger_remote.h:91:6: warning: 'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder]
core/script_debugger_remote.h:92:6: warning: 'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder]
modules/bullet/area_bullet.h:92:39: warning: 'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder]
modules/bullet/area_bullet.cpp:46:1: warning: when initialized here [-Wreorder]
modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder]
modules/bullet/collision_object_bullet.h:117:7: warning: 'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder]
modules/bullet/collision_object_bullet.cpp:67:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:46:33: warning: 'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder]
modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:89:6: warning: 'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:93:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:140:6: warning: 'int GodotAllContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:147:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:166:6: warning: 'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:173:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:191:7: warning: 'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder]
modules/bullet/godot_result_callbacks.h:199:2: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:199:9: warning: 'real_t RigidBodyBullet::mass' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:219:7: warning: 'bool RigidBodyBullet::isTransformChanged' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:208:6: warning: 'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:68:6: warning: 'int SoftBodyBullet::simulation_precision' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:61:14: warning: 'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:95:35: warning: 'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:99:23: warning: 'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder]
modules/gdnative/nativescript/nativescript.h:73:9: warning: 'String NativeScriptDesc::documentation' [-Wreorder]
modules/gdnative/nativescript/nativescript.h:88:9: warning: when initialized here [-Wreorder]
modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder]
modules/gdscript/gdscript.h:294:4: warning: 'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder]
modules/gdscript/gdscript.h:303:2: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder]
scene/3d/physics_body.h:543:7: warning: 'bool PhysicalBone::_internal_static_body' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder]
scene/3d/physics_body.h:539:12: warning: 'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder]
scene/3d/spring_arm.h:43:8: warning: 'float SpringArm::current_spring_length' [-Wreorder]
scene/3d/spring_arm.cpp:37:1: warning: when initialized here [-Wreorder]
scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder]
scene/animation/skeleton_ik.h:152:7: warning: 'bool SkeletonIK::use_magnet' [-Wreorder]
scene/animation/skeleton_ik.cpp:418:1: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder]
scene/resources/tile_set.h:83:7: warning: 'int TileSet::AutotileData::spacing' [-Wreorder]
scene/resources/tile_set.h:92:12: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder]
scene/resources/tile_set.h:114:9: warning: 'Color TileSet::TileData::modulate' [-Wreorder]
scene/resources/tile_set.h:120:12: warning: when initialized here [-Wreorder]
servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder]
servers/physics/body_sw.h:57:11: warning: 'uint16_t BodySW::locked_axis' [-Wreorder]
servers/physics/body_sw.cpp:756:1: warning: when initialized here [-Wreorder]
```
Nothing really relevant for us, but it's not a bad consistency
improvement anyway so worth taking.
Fixes GCC 5 warnings of the form:
core/io/http_client.cpp:288:9: warning: enumeration value 'STATUS_SSL_HANDSHAKE_ERROR' not handled in switch [-Wswitch]
core/io/marshalls.cpp:806:9: warning: enumeration value 'AABB' not handled in switch [-Wswitch]
Those can be trivial cases where adding a default fallback is the solution,
or more complex issues/hidden bugs where missed values are actually meant
to be handled.
Fixes the following GCC 5 warnings:
```
drivers/gles2/rasterizer_canvas_gles2.cpp:814:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2270:11: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2673:22: warning: variable 'e' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:715:7: warning: variable 'no_cull' set but not used [-Wunused-but-set-variable]
drivers/gles2/shader_gles2.cpp:693:14: warning: variable 'cc' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_canvas_gles3.cpp:1226:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:3039:10: warning: variable 'contrib' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:4504:32: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
editor/editor_inspector.cpp:272:9: warning: variable 'guide_color' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:1067:14: warning: variable 'alpha3' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:263:8: warning: variable 'script_bg_color' set but not used [-Wunused-but-set-variable]
editor/plugins/collision_shape_2d_editor_plugin.cpp:326:11: warning: variable 'cpoint' set but not used [-Wunused-but-set-variable]
editor/plugins/mesh_editor_plugin.cpp:72:9: warning: variable 'size' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:471:12: warning: variable 'mpos' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:89:8: warning: variable 'basetype_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:90:8: warning: variable 'type_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:92:8: warning: variable 'string_color' set but not used [-Wunused-but-set-variable]
modules/visual_script/visual_script_editor.cpp:2521:7: warning: variable 'seq_connect' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:580:12: warning: variable 'styles_count' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:584:12: warning: variable 'styles_offset' set but not used [-Wunused-but-set-variable]
platform/osx/export/export.cpp:464:9: warning: variable 'zerr' set but not used [-Wunused-but-set-variable]
scene/2d/tile_map.cpp:260:10: warning: variable 'tcenter' set but not used [-Wunused-but-set-variable]
scene/3d/light.cpp:166:7: warning: variable 'editor_ok' set but not used [-Wunused-but-set-variable]
scene/3d/navigation.cpp:566:11: warning: variable 'closest_navmesh' set but not used [-Wunused-but-set-variable]
scene/gui/rich_text_label.cpp:869:8: warning: variable 'size' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:705:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:706:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:726:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:727:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/resources/material.cpp:430:7: warning: variable 'using_world' set but not used [-Wunused-but-set-variable]
servers/visual/shader_language.cpp:2026:7: warning: variable 'all_const' set but not used [-Wunused-but-set-variable]
servers/visual/visual_server_scene.cpp:1383:28: warning: variable 'z_max_cam' set but not used [-Wunused-but-set-variable]
```
Also fixes two [-Wunused-value] warnings:
```
scene/gui/text_edit.cpp:4405:20: warning: statement has no effect [-Wunused-value]
servers/visual/visual_server_scene.cpp:905:48: warning: value computed is not used [-Wunused-value]
```
Some of those are bugs and need further work, they are identified with
`// FIXME` comments.
Also turn off -Wsign-compare warnings in the future, we do not consider them important.
Fixes the following GCC 5 warnings:
```
core/node_path.cpp:279:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:169:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:314:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/shader_gles2.cpp:985:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles3/rasterizer_storage_gles3.cpp:1075:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/pulseaudio/audio_driver_pulseaudio.cpp:343:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_plugin.cpp:525:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_properties_array_dict.cpp:747:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:2078:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:4096:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/sprite_editor_plugin.cpp💯20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:122:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:134:77: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:339:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/etc/image_etc.cpp:222:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:242:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:258:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:200:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:222:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:246:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1085:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1489:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1623:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:206:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:356:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:406:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:493:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/audio_stream_player_3d.cpp:420:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:565:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:571:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_rb_resampler.cpp:156:36: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
The following warnings were not fixed, as they implied casting for no gain:
```
core/io/packet_peer.cpp:228:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/io/resource_format_binary.cpp:109:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/rasterizer_scene_gles2.cpp:144:57: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/unix/file_access_unix.cpp:249:46: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:889:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1020:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1154:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:2255:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/bit_mask.cpp:336:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:141:49: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:150:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:154:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:86:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:89:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
Better heuristic for the shortest path algorithm for navigation2D and navigation.
It now will use the shortest distance to the polygon as cost instead of the distance to the center.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
It's shared by both 2D and 3D particles (+ CPU ones), so it makes sense
to have as a common resource. It also allowed to disable compilation of
Particles (3D) when using 'disable_3d'.
Also cleaned up includes in SpatialEditorGizmos and some other places,
as well as dropped dead code in material_editor_plugin.cpp.
Without this change any new PhysicsBody would show deprecation warnings
due to default values for friction and bounce being defined.
It also enforced a physics material override even when using default
values.
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
Specifically, project/unproject methods weren't taking them into account. Frustum computation may be affected as well.
This commit considers them for the camera matrix at all times.
- Hinge Joint Inspector:
Motor target velocity range changed from [0,4096] to [-200,200] to allow for negative velocity and a reasonable range.
Params bias now allows a zero value to prevent the bullet message of not supporting a non-zero bias.
-Missing Icons
-Missing freezing option (for baking light and faster load)
-Missing a way to export from Godot (GLTF2?)
-Probably buggy (may freeze editor, can be worked around easily, but let me know if this happens so it's easier to catch bugs)
Happy testing!
Fixes reported logically dead codes by Coverity
* image.cpp: Doesn't really need any modification. But to remove the bug
report then we have to move the MAX call away from the for loop
statement.
* rasterizer_gles3.cpp: Removes unnecessary elif condition since it is
checked earlier in the function
* collada.cpp: If stamement never reached due to macro ERR_CONTINUE does
the same.
* navigation_mesh.cpp: Variables should always be null - however, also
checked for the very same condition in their function call. Leaving this
for review (whether the function call is necessary or not)
* path_editor_plugin.cpp: If cancel is true, then it should restore the
edited value to the original provided.
http://docs.godotengine.org/en/3.0/classes/class_editorspatialgizmo.html#class-editorspatialgizmo-commit-handle
* spatial_editor_gizmos.cpp: the very condition of i >= 3 is
predetermined in the if case right before it. Thus case 1 is always '1'
and case 2 is always '-1'
* grid_map_editor.cpp: Same as above in spatial_editor_gizmos.cpp
* voxel_light_baker.cpp: Same as above in spatial_editor_gizmos.cpp
* visual_server.cpp: Same as above in spatial_editor_gizmos.cpp
* visual_script_expression.cpp: char '-' is already true in the switch
case mechanism. Thus it can never reach to default case.
* particles.cpp: Case 'PARAM_MAX' is unreachable due to index checking
right before the switch execution.
* shader_language.cpp: Invalid index is handled in switch default case.
`type < TYPE_FLOAT && type > TYPE_VEC4` -> `(type < TYPE_FLOAT || type > TYPE_VEC4`)
Fixes the "always false problem" in TODO comment.
Also ensure that get_scale doesn't arbitrarlity change the signs of scales, ensuring that the combination of get_rotation and get_scale gives the correct basis.
Added various missing functions and constructors.
Should close#17968.
The hue variation matrix is hardcoded as transposed and thus the multiplication always yielded the original color value.
I wanted to keep the matrix and get the same result by switching the operands (getting a result as if the matrix was transposed).
It appears that some time ago users were supposed to be able to include the playback of sound effects in their animations by placing keys on the "playing" property. Back then the key frame editor took the value of the checkbox in the property_editor.
Somewhere / Sometime this behaviour changed and the key frame editor is now reading the actual value from the object instead of relying on the property editor.
This commit introduces a fake active field that is returned when reading the playing property in the editor. While the actual active flag is changed when playback is finished the fake one will stay the same thus allowing the user to take their time with setting the key in the animation editor.
It is possible to try to add an invalid object as a navmesh through
GDScript which results in an engine crash. This creates a debug message
that should help the user figure out what's wrong.
Found via `codespell -q 3 --skip="./thirdparty,./editor/translations" -I ../godot-word-whitelist.txt`
Whitelist consists of:
```
ang
doubleclick
lod
nd
que
te
unselect
```
Notable potentially breaking changes:
- PROPERTY_USAGE_NOEDITOR is now PROPERTY_USAGE_STORAGE | PROPERTY_USAGE_NETWORK, without PROPERTY_USAGE_INTERNAL
- Some properties were renamed, and sometimes even shadowed by new ones
- New getter methods (some virtual) were added
This is needed because the final startup values for shapes may change between parenting and entering the scene tree. For instance, if the collision shape belongs to a inherited scene.
Fixes#13835.
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
That change was borne out of a confusion regarding the meaning of "local" in #14569.
Affine transformations in Spatial simply correspond to affine operations of its Transform. Such operations take place in a coordinate system that is defined by the parent Spatial. When there is no parent, they correspond to operations in the global coordinate system.
This coordinate system, which is relative to the parent, has been referred to as the local coordinate system in the docs so far, but this sloppy language has apparently confused some users, making them think that the local coordinate system refers to the one whose axes are "painted" on the Spatial node itself.
To avoid such conceptual conflations and misunderstandings in the future, the parent-relative local system is now referred to as "parent-local", and the object-relative local system is called "object-local" in the docs.
This commit adds the functionality "requested" in #14569, not by changing how rotate/scale/translate works, but by adding new rotate_object_local, scale_object_local and translate_object_local functions. Also, for completeness, there is now global_scale.
This commit also updates another part of the docs regarding the rotation property of Spatial, which also leads to confusion among some users.
The previous commit corrected the RNG behavior for the lightbaker but
also made it significantly slower on high core count systems. Due to the
vector of states being physically close together in RAM we force a cache
synchronization across all cores whenever we call for the next random
number to be generated.
This will create a temporary local copy of the RNG state before entering
the loop and then saving it back to the global state when done. This
will preserve the per-thread RNG state (and random number quality) while
significantly improving performance.
On my 16 thread box it saves 3 minutes baking the Sponza scene, bringing
performance back in line to before the various RNG fixes were
introduced, being slightly faster than the first implementation.
In our previous attempts to fix the lightmapper we may have
inadvertently introduced the same issue we were trying to fix. It
appears that rand() will on some platforms introduce a mutex making it
slower and on others may have a per-thread state that would need to be
initialized with srand() on each thread. This slows down the lightbaking
further.
This sets up a separate rng state for each OpenMP thread by calling
rand() only in the single-threaded part of the code. We then keep a
vector of states.
I believe this solves our problems.
Due to memory contraints in other places in Godot it is unlikely that
anything higher than 1024 will actually work. When/if we improve memory
management for vectors we can increase this limit again
Based off of perf-based prediction misses these seem to be the
lowest-hanging fruit for quick (albeit small) improvements. These are
based on:
* baking a complex lightmap
* running platformer 3d
* running goltorus
On higher threadcount systems this allows for better utilization. On my
16 thread box CPU use goes from 10 - 11 threads to a steady 15 threads
on the Sponza scene.
Baking time goes from ~10:00 to ~07:30 for me. On lower threadcount
systems I expect some improvement also but likely a little less.
This speeds up the lightmapper by about 10% with no visible impact. A
comparison is up here:
https://tmm.cx/nextcloud/s/Log1eAXen1dJzBz
AMD Ryzen 7 1700 Eight-Core Processor
Sponza scene
pcg32
256/256/high 00:10:13
256/256/medium 00:02:50
256/256/low 00:01:11
xorshift
256/256/high 00:09:32
256/256/medium 00:02:34
256/256/low 00:01:05
-Fixes to unwrapper (remove degenerates), makes Thekla not crash
-Added optional cancel button in EditorProgress
-Added function to force processing of events (needed for cancel button)
Rémi Verschelde
clayjohn
luz.paz
Juan Linietsky
Michael Alexsander Silva Dias
Tomasz Chabora
Robin Hübner
Milan Davidovic
Hugo Locurcio
IAmActuallyCthulhu
qarmin
David Sichma
groud
Jon Ring
Demiu
Ibrahn Sahir
Simon Puchert
Nathan Warden
Bojidar Marinov
zwostein
Furkan Türkal
JohnJLight
jfons
kbajno
Cameron Reikes
Cheeseness
Jummit
Rodolfo Ribeiro Gomes
Bastiaan Olij
yakun.zhang
Aaron Franke
Daeil Kim
ShyRed
Daniel Rakos
Hein-Pieter van Braam
Nils ANDRÉ-CHANG
K. S. Ernest (iFire) Lee
CatThingy
Adam Sharp
Pedro J. Estébanez
piyushdagar
Juan Linietsky
marxin
Marcelo Fernandez
Tom McLean
Marc Gilleron
Yusuf
George Linkovsky
Grant Clarke
Evgeny Savelyev
Danilo Villa (Davi)
Timo Schwarzer
Aron Castro
Gleb Mineev
paul gruenbacher
Omicron
Andrea Catania
Florian Jung
Italo Vieira
Ivan Varesi
Geoffrey Irons
Kanabenki
Guilherme Recchi Cardozo
FlamyAT
M. Huri
Florian Jung
PouleyKetchoupp
Dualtagh Murray
MrCdK
karroffel
DualMatrix
Kelly Thomas
Yuri Chornoivan
Webster Sheets
Chaosus
QbieShay
oisincar
Max Hilbrunner
Tiger Caldwell
chanon
clayjohn
Jeffs
tagcup
Brian Richardson
Ignacio Etcheverry
Crazy-P
Alexander Alekseev
brendor
Jakub Grzesik
Bernhard Liebl
Poommetee Ketson
Chris Bradfield
Artem Varaksa
sdfgeoff
Paolo Perkovic
Ruslan Mustakov
Scayze
volzhs
Daniel J. Ramirez
Stefano Bonicatti
matrem
Andreas Haas
Michele Valente
Will Nations
Marco Masselli
Tom Beckmann