This makes it easier to notice that some menu items only appear when
specific nodes are selected.
This change applies to both 2D and 3D editors, including both plugin-based
menus and the hardcoded 2D layout/animation contextual menus.
- Allow some tolerance when clicking the plane move/scale,
even if the click is actually slightly outside the plane
(similar to Blender).
- Make the rotate manipulation circles visually thinner to be
less distracting.
- Make the hovered color less saturated to be more distinguishable
from the non-hovered state.
- Don't set brightness above 1.0 to prevent the gizmo from glowing
when hovered.
(cherry picked from commit 6cfcbbbb93)
- Makes tips clearer and more consistent.
- Removes outdated "shift+v" that doesn't work
- Adds Ctrl+RMB for adding nodes at position
- Removes tip for non-existent Alt+Drag in 3D select tool
(cherry picked from commit 6b90e2df6c)
A Camera node still has to be selected to initially enable camera
preview, but another node can then be selected and the preview can
be disabled by pressing the shortcut key again.
This is already allowed when using cinematic preview, but not
when previewing a Camera3D the usual way.
Many operations from the View menu still work while previewing
a camera, such as switching between debug draw modes and toggling
information panes.
(cherry picked from commit fab3d136e0)
The 2D editor grid toggle shortcut has been changed to use
`KEY_MASK_CMD` for consistency. This means it will now use Cmd
on macOS instead of Ctrl.
(cherry picked from commit 2cc053c64b)
This is an older, easier to implement variant of CAS as a pure
fragment shader. It doesn't support upscaling, but we won't make
use of it (at least for now).
The sharpening intensity can be adjusted on a per-Viewport basis.
For the root viewport, it can be adjusted in the Project Settings.
Since `textureLodOffset()` isn't available in GLES2, there is no
way to support contrast-adaptive sharpening in GLES2.
Previously, the wrong tooltip was shown.
This also tweaks the tooltips' texts to be clearer and remove
references to "game" (since Godot is used for more than just games).
(cherry picked from commit d1c5dd5b68)
The editor only needs to redraw when the camera is moving.
This helps preserver battery life on laptops when using freelook,
especially with the toggle mode (Shift + F).
(cherry picked from commit 21807f8d88)
When there is no selection, the camera will center around the
world origin.
This helps people get back to the world center if they haven't added
any nodes yet.
(cherry picked from commit fc055e1993)
ALT key modifier was hardcoded is node_3d_editor_plugin.cpp and didn't take editor settings into account.
Fix#46973
(cherry picked from commit 31077d875e)
This commit adds a view-dependant fade to the 3D viewport grid. It fades out
at steep view angles to hide the solid regions that appear far from the camera.
I also included a fade to hide the grid borders.
I added some improvements to the dynamic grid when the camera is in orthogonal mode.
It properly handles zoom now, and the grid center is now set to the intersection point
between the grid plane and the camera forward ray, keeping the grid
always visible.
(cherry picked from commit 73e62dffb9)
Cinematic preview enables the Camera3D preview automatically.
When previewing a Camera3D, the rotation gizmo isn't displayed as
it can't be used.
(cherry picked from commit fa1d853eeb)
fix for issue #44282
AABB for collision geometry was being calculated based on parent nodes transform without consideration for collision geometries translation.
Also hopefully clarified logic for selecting starting point for ray cast
(cherry picked from commit 4f171afecc)
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
- Brighten gizmos when highlighted to make the difference between a
non-highlighted and a highlighted gizmo more visible.
- Tweak the manipulator gizmo size property hint.
(cherry picked from commit 8522ac7711)
fix for issue #44231: snap_selected_nodes_to_floor() results in an editor
crash when a child collisionshape has invalid shape object
(cherry picked from commit 52f6e0b5ad)
- The grid is now infinite, it follows the camera.
- The grid is now dynamic, if you zoom in and out, the grid subdivides,
expands, and fades.
- You can now enable grid planes for the XY and YZ planes. Only the flat
XZ plane is enabled by default. Each plane is independently dynamic
of the others.
- The default grid size has been increased to 200, and the maximum
has been increased to 2000. At 1000, the grid mostly looks edgeless.
- If you set the division level max and min to the same value then
the grid does not expand or subdivide, but instead stays the same size
and just follows the camera. Also, if these values are the same,
the bias value does nothing.
- If you want to have Blender-like behavior, set max to 1, min to 0,
and set the bias to a really low value. You may also wish to increase
the grid size if you have a small bias.
Co-authored-by: Aaron Franke <arnfranke@yahoo.com>
- Draw two boxes slightly offset from each other to give the illustion
of a thicker outline.
- Decrease the offset compared to the 3D node's AABB to give a more
accurate representation of its size.
- Make the box fully visible instead of only displaying the corners.
- Draw a x-ray version of the box that's more translucent, but visible
through walls. This helps make the box more visible while still
having a sense of depth.
- Use an orange color similar to the 2D editor.
Hide the back sides of the rotation gizmo circles and add a white
outline for better visualization of the rotation "sphere".
This is a 3.2 backport of @JFons work on the master branch; all credit
goes to him.
It can be enabled in the Project Settings
(`rendering/quality/filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
As a result, it should be enabled only when banding is noticeable enough.
Since debanding requires a HDR viewport to work, it's only supported
in the GLES3 backend.
Methods were being called with InputEventMouseMotion instead of InputEventPanGesture, and they were null.
Fixesgodotengine/godot#16181 on the master branch
(cherry picked from commit 394a7826be)
Now that the 3D editor grid is infinite and adjusts its step automatically,
this helps people get a better sense of scale when moving around in the
3D viewport.
This also fixes the indicator bar drawing on hiDPI displays.
(cherry picked from commit eaae50fe4a)
It made minor adjustments difficult as the camera moved every time
Align Transform With View was used.
This closes#36738.
(cherry picked from commit a636631e33)
This fixes numerous false positives coming out of the culling system.
AABB checks are now a full separating-axis check against the frustum, with the points of the frustum being compared to the planes of the box just as the points of the box were being compared to the planes of the frustum. This fixes large objects behind the camera not being culled correctly.
Some systems that used frustums that were (sometimes mistakenly?) unbounded on one or more side have been modified to be fully enclosed.
Fixes#18809.
The in-editor ortho camera used a far clipping plane of 8192 units, and was
placed 4096 units away from the camera cursor.
This was far enough to cause culling issues from floating point precision loss
on objects smaller than one unit.
This change modifies the near/far clipping planes of the ortho camera to use
those specified in the editor (and currently used by the perspective camera).
The frustum is still centered around the camera cursor location, as it was
before.
Changes made:
* Added dirty bit for SpatialEditorSelectedItem's last_xform
* SpatialEditorViewport checks that dirt bit too before skipping the selection
(cherry picked from commit 19825436d4)
The AABB for an empty Spatial has 0 size, since the stored and
compared Transform was scaled by the AABB size, it would completely
destroy the rotation information. If there is no rotation
information, the gizmo doesn't update when the rotation changes.
(cherry picked from commit a0af3094b4)
Fixes#26637.
Fixes#19900.
The viewport_size returned by get_viewport_size was previously incorrect, being half the correct value. The function is renamed to get_viewport_half_extents, and now returns a Vector2.
Code which called this function has also been modified accordingly.
This PR also fixes shadow culling when using ortho cameras, because the correct input for CameraMatrix::set_orthogonal should be the full HEIGHT from get_viewport_half_extents, and not half the width.
It also fixes state.ubo_data.viewport_size in rasterizer_scene_gles3.cpp to be the width and the height of the viewport in pixels as stated in the documentation, rather than the current value which is half the viewport extents in worldspace, presumed to be a bug.
The crosshair makes freelook navigation a bit easier, while making it
clearer that it's possible to select nodes by clicking while in
freelook mode.
The crosshair is only displayed while in freelook mode.
It uses an icon designed to be visible on any background.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
This makes it easier to navigate in 3D when using a graphics tablet.
This fallback modifier will only be available if no other modifier
is using Alt.
This partially addresses
https://github.com/godotengine/godot-proposals/issues/196.