-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
* Prototype faster function call ux.
* Work on general search ux.
* Able to create nodes from search.
* Show class for variables but not methods.
* Get actions search working.
* Descriptions now show for both methods and properties.
* Enable zooming on mouse wheel up and down.
* Make the drag trigger on right mouse button.
* Search now shows for action visual script nodes.
* Able to search visual node names.
* Search works better.
* Change zooming scale to hide artifacts better.
* Remove zoom changes
* Select from base should check properties too like the other functions.
* Seq_connect flag is needed to set sequence lines correctly.
* Remove comment
* Code cleanup with function names and arguments.
* Use brief description for search descriptions.
* Clean and fix bug with input nodes connecting with sequence lines.
* Add a warning and fix some edge conditions with sequence into data lines and vice versa.
* Don't search functions when pulling from a sequence node.
* Don't show actions when pulling from a data line.
* Set set and get properties.
* Convert visual script operators to the correct type
* Create a function preset finds only functions.
* Singletons can now find functions.
* Add shift-a for generic search.
* Add brief descriptions for Visual Script nodes.
* Search boxes can now filter names.
* Add bigger hit zones to node connect.
* For the drop zones, make all the rect2 areas the same size.
* Function names in visual script node should be lower case so that search works better.
* Use the convention of capitalize() for set, set, visual script nodes and methods.
* Make search more general. Ignore "_" and make case-insensitive. Also made the search window smaller and remove extra info from search
* Make type_cast use the connecting node's type and remove use of found variable.
* Fix case where you call an instance's call function where it becomes an invalid call.
* Make get_visual_node_names use a set of filters, move action creations and fix bug with sequence node connections.
* Make the window bigger.
* Make connect_data and connect_seq more robust.
* Add icons to search items.
* Add vs constructors in shift-a menu.
* Operators, builtins and constructors show type name. Fix several problems with port connections.
* In shift-a mode search everything.
* Code cleanup
* Work on autocompleting the type.
* Use type guess in action creation.
* Check if type hint string exists in object variables when generating the visual script search.
* Add the hint to SceneTree.
* Add original type detection.
* Make type casting great again. This puts the type casted base type as the data output type string hint.
* Pass the type in a VisualScriptFunctionCall too.
* Set the base type correctly in VisualScriptFunctionGet and VisualScriptFunctionSet using hint string.
* Make sure the instance is passed in VisualScriptPropertySet.
* Restore search on the node's type.
* Remove dependencies from graph_edit.
* Remove dependencies from property_selector and name the class visual_script_property_selector.
* Extract hot zones into a function.
* Move hot_zones constants into default theme.
* Bigger capture zones.
* Clean messy port_grab_distance variables.
* Remove RMB functionality.
* Remove memory leak on showing visual script descriptions.
* Read the port_grab_distance constants on enter tree and theme changed.
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
-Added ability to set/get a field in GetSet, as well as assignment ops
-Added a Select node
-Fixed update bugs related to variable list and exported properties, closes#9458
I can show you the code
Pretty, with proper whitespace
Tell me, coder, now when did
You last write readable code?
I can open your eyes
Make you see your bad indent
Force you to respect the style
The core devs agreed upon
A whole new world
A new fantastic code format
A de facto standard
With some sugar
Enforced with clang-format
A whole new world
A dazzling style we all dreamed of
And when we read it through
It's crystal clear
That now we're in a whole new world of code
-Changed SectionedPropertyEditor to support this
-Renamed Globals singleton to GlobalConfig, makes more sense.
-Changed the logic behind persisten global settings, instead of the persist checkbox, a revert button is now available
-Block switches to 2d/3d editor if editing visual script
-Added cast node in flow control
-Added ability to do RPC in visual script
-Comment nodes
-Fix bug with inverted cable in connecting backwards
-Copy and paste nodes, including from different scripts
Rémi Verschelde
Aaron Franke
Lightning_A
Anshul7sp1
reduz
Juan Linietsky
Hein-Pieter van Braam
K. S. Ernest (iFire) Lee
Pieter-Jan Briers
George Marques