This is done to prevent reducing texture quality when it doesn't save
much video memory, especially for pixel art.
The size threshold can be adjusted in the project settings.
To get the previous behavior where textures detected to be used in 3D
had their compression mode always set to VRAM, set this to the lowest value
(16).
I had an error while importing my GLB file from 32-bit precision
floating point,
I guess this was forgotten while implementing 64-bit precision floating
point.
I'm not sure if there's any other left to do though.
Initial TAA support based on the implementation in Spartan Engine.
Motion vectors are correctly generated for camera and mesh movement, but there is no support for other things like particles or skeleton deformations.
* Replace case-by-case extraction with PNAME & GNAME
* Fix group handling when group hint begins with property name
* Exclude properties that are PROPERTY_USAGE_NO_EDITOR
* Extract missing ADD_ARRAY*, ADD_SUBGROUP* macros
Arrays can be set as read-only and thus cannot be modified. Assigning
the array will create an editable copy.
Similar to is already done to read-only dictionaries.
* Add ability to set them read only.
* If read-only, it can't be modified.
This is added in order to optionally make const dictionaries (and eventually arrays) properly read-only in GDScript.
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
Adds a new, cleaned up, HashMap implementation.
* Uses Robin Hood Hashing (https://en.wikipedia.org/wiki/Hash_table#Robin_Hood_hashing).
* Keeps elements in a double linked list for simpler, ordered, iteration.
* Allows keeping iterators for later use in removal (Unlike Map<>, it does not do much
for performance vs keeping the key, but helps replace old code).
* Uses a more modern C++ iterator API, deprecates the old one.
* Supports custom allocator (in case there is a wish to use a paged one).
This class aims to unify all the associative template usage and replace it by this one:
* Map<> (whereas key order does not matter, which is 99% of cases)
* HashMap<>
* OrderedHashMap<>
* OAHashMap<>
Allow AStar2D/AStar3D zero point weight.
Limit was set to 1 which seemed like an arbitrary value as lower values down to zero can be useful for common gameplay navigation elements like teleports.
* Changed to use the same stages as extensions.
* Makes the initialization more coherent, helping solve problems due to lack of stages.
* Makes it easier to port between module and extension.
* removed the DRIVER initialization level (no longer needed).
Adds the is_process_running function to the native OS class and exposes it to script.
This is implemented on Windows and Unix platforms. A stub is provided for other platforms that do not support this function.
Documentation is updated to reflect new API function.
Implemented by request of @neikeq to advance in the GDExtension version of Mono.
* If a Resource type is missing upon load, it will be remembered together with its data (Unless manually overriden).
* If a Node type is missing upon load, it will be also be remembered together with its data (unless deleted).
This feature makes working with GDExtension much easier, as it ensures that missing types no longer cause data loss.
These typedefs don't save much typing compared to the full `Ref<Resource>`
and `Ref<RefCounted>`, yet they sometimes introduce confusion among
new contributors.
Didn't commit all the changes where it wants to initialize a struct
with `{}`. Should be reviewed in a separate PR.
Option `IgnoreArrays` enabled for now to be conservative, can be
disabled to see if it proposes more useful changes.
Also fixed manually a handful of other missing initializations / moved
some from constructors.
Implements https://github.com/godotengine/godot-proposals/issues/4096
* Nodes can be marked unique to the scene in the editor (or via code).
* Unique nodes can be accessed via the **%** prefix at any point in the path. From that point in the path (depending on whether the scene of the path is), the unique node will be fetched.
* Implementation is very optimal, as these nodes are cached.
Windows export process:
Limit size of executable with embedded PCK to 4 GB.
Use "rcedit" before embedding PCK.
Capture and process "rcedit" errors.
Windows, Linux:
Add support for PCK loading from executable "pck" section.
Type emit_signal exposed method return type
set UndoRedo add_do_method and add_undo_method exposed return void
Set TreeItem::_call_recursive_bind returns void
Set _rpc_bind and _rpc_id_bind returns void in Node
Set _call_group and _call_group_flags method returns void in SceneTree
Set godot-cpp-test CI flag to false
* Resource that allows saving textures embedded in scenes or standalone.
* Supports only formats that are portable: Lossy, Lossles or BasisUniversal
This is something I wanted to add for a long time. I made it now because @fire
requires it for importing GLTF2 files with embedded textures, but also this
will allow saving Godot scenes as standalone binary files that will run
in all platforms (because textures will load everywhere).
This is ideal when you want to distribute individual standalone assets online
in games that can be built from Godot scenes.
The UDP method is now called `is_socket_connected` to limit confusion
with the actual host connection status which doesn't make sense in UDP.
The TCP method is completly dropped, use get_status instead.
The only one left is the WebSocketPeer one, which should be fine as is
for now.
* Ability to create script languages from GDExtension
* Some additions to gdnative_extension.h to make this happen
* Moved the GDExtension binder to core
This now allows creating scripting languages from GDExtension, with the same ease as if it was a module. It replaces the old PluginScript from Godot 3.x.
Warning: GodotCPP will need to be updated to support this (it may be a bit of work as ScriptInstance needs to be created over there again).
We might want to re-add something like this if/when we find a good use case
for it and do the effort to categorize all objects in the API properly.
Until then, it's better to remove that boilerplate since it's not needed.
Closes#18711.
* API kept the same (Although functions could be renamed to set_metadata/get_metadata in a later PR), so not much should change.
* Metadata now exposed as individual properties.
* Properties are editable in inspector (unless metadata name begins with _) under the metadata/ namespace.
* Added the ability to Add/Remove metadata properties to the inspector.
This is a functionality that was requested very often, that makes metadata work a bit more similar to custom properties in Blender.
This makes the following error message less likely to be printed
when performing many concurrent HTTP requests:
Condition ' resolving == IP::RESOLVER_INVALID_ID ' is true. returned: ERR_BUG
Adds DEV_ASSERTS that will halt at runtime if the BVH is misused with invalid IDs, and adds ERR_FAIL macros to prevent calling with invalid IDs.
Any such misuse is a bug in the physics, but this should flag any errors quickly.
* Based on the work done for Variant in the past.
* Added `ClassDB::bind_static_method`
* Cleaned up ClassDB::bind_method to use variadic templates.
This adds support for having static methods in Object derived classes.
Note that this does not make it work yet in GDScript or Mono and, while it works for GDExtension, GodotCPP needs to be updated.
- Print all StringNames, not just the top 100.
- Print statistics at the end of the list of StringNames,
with unreferenced and rarely referenced StringNames.
- List the CLI argument in `--help` and shell completion.
* Allows creating a GDExtension based 3D Physics Server (for Bullet, PhysX, etc. support)
* Some changes on native struct binding for PhysicsServer
This allows a 3D Physics server created entirely from GDExtension. Once it works, the idea is to port the 2D one to it.
`DirAccess *` needs to be deleted manually, and this is often forgotten
especially when doing early returns with `ERR_FAIL_COND`.
`DirAccessRef` is deleted automatically when it goes out of scope.
Co-authored-by: bruvzg <7645683+bruvzg@users.noreply.github.com>
* Previous "virtual" classes (which can't be instantiated) are not corretly named "abstract".
* Added a new "virtual" category for classes, they can't be instantiated from the editor, but can be inherited from script and extensions.
* Converted a large amount of classes from "abstract" to "virtual" where it makes sense.
Most classes that make sense have been converted. Missing:
* Physics servers
* VideoStream
* Script* classes.
which will go in a separate PR due to the complexity involved.
It has been disabled in `master` since one year (#45852) and our plan
is for Bullet, and possibly other thirdparty physics engines, to be
implemented via GDExtension so that they can be selected by the users
who need them.
* Very old macros from the time Godot was created.
* Limited arguments to 5 (then later changed to 8) in many places.
* They were replaced by C++11 Variadic Templates.
* Renamed methods that take argument pointers to have a "p" suffix. This was used in some places and not in others, so made it standard.
* Also added a dereference check for Variant*. Helped catch a couple of bugs.
This method was meant only as a convenience for editor code
to allow using a step of 0 to disable snapping.
It was exposed by mistake when refactoring GlobalScope.
A previous PR had changed the array operator to give unbounded access. This could cause crashes where old code depended on this previous safe behaviour.
This PR adds DEV_ASSERT macros for out of bound access to DEV builds, allowing us to quickly identify bugs in calling code, without affecting performance in release or release_debug editor builds.
enh: Add FLAG_NONE to SaverFlags in ResourceSaver to fix api inconsistency
fix: flags parameter of ResourceSaver::save is now uint32_t to allow flag composition in scripts
* Changed syntax usage for RD::Uniform to create faster with a single RID
* Converted render pass setup to use this in clustered renderer to test.
This is the first step into creating a proper uniform set cache system to simplify large parts of the codebase.
Add localizable string (Dictionary<Lang Code, String>) property editor and property hint.
Add localized "app name" property to the project settings.
Add localized permission and copyright properties to the macOS and iOS export settings.
Remove some duplicated ("app name") and deprecated ("info") macOS and iOS export properties.
This ensures the project setting never disappears from the editor,
even if the current physics engine is GodotPhysics.
This also adds documentation for the Smooth Trimesh Collision
project setting.
Rémi Verschelde
Marcel Admiraal
bruvzg
Ellen Poe
gregcsokas
Yuri Rubinsky
Pedro J. Estébanez
Hendrik Brucker
kobewi
Hugo Locurcio
Haoyu Qiu
Emmanuel Leblond
FireForge
xutaxkamay
Rémi Verschelde
sps1112
Danil Alexeev
K. S. Ernest (iFire) Lee
jfons
Aaron Franke
Raul Santos
George Marques
Fabio Alessandrelli
Lyuma
Nathan Franke
reduz
Aaron Record
Ricardo Buring
clayjohn
smix8
Nicholas Huelin
mdavisprog
Paulb23
AndreaCatania
laws65
Oğuzhan Eroğlu
nova++
KingCakeTheFruity
RedHeadphone
SaracenOne
Silc 'Tokage' Renew
Bartłomiej T. Listwon
Marc Gilleron
Mark Riedesel
Eric M
Pierre-Thomas Meisels
mashumafi
Jan Haller
Markus Sauermann
lawnjelly
taigi100
keptsecret
Ing. Petr Jindra
Theraot