The main change is to caculate tangent directly from bezier curve, without going
through discretized polyline, avoiding pitfalls of discretization.
Other changes are:
1. Add an bezier_derivative() method for Vector3, Vector2, and Math;
2. Add an tesselate_even_length() method to Curve3D, which tesselate bezier curve to even length segments adaptively;
3. Cache the tangent vectors in baked_tangent_vector_cache;
This commit makes the following major changes
1. Add "sample_baked_with_rotation()" to Curve3D, making it usable independently. A similar change was made to Curve2D previously.
2. Refactor the _bake() method on Curve3D, using Parallel Transport Frame instead of Frenet Frame.
3. Refactor the sample_* methods, including:
i. Factor out common binary search code, following the DRY principe
ii. sample_up_vector() interpolated up vector as part of rotation frame(posture) for consistancy and accuracy.
Implements a method `mark_dirty` in Curve2D and Curve3D like the one
that already exists in Curve, it's a convenient way to set
`baked_cache_dirty` to `true` and also emit the `changed` signal.
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
While calculating interpolated points, intervals between two baked
points has been assummed to be `baked_interval`. The assumption could
cause significant error in some extreme cases (for example #7088).
To improve accuracy, `baked_dist_cache` is introduced, which stores
distance from starting point for each baked points. `interpolate_baked`
now returns exact linear-interpolated position along baked points.
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
-Enable the trails and set the length in seconds
-Provide a mesh with a skeleton and a skin
-Or, alternatively use one of the built-in TubeTrailMesh/RibbonTrailMesh
-Works deterministically
-Fixed particle collisions (were broken)
-Not working in 2D yet (that will happen next)
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
This reverts commit ec7b481170.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
The setters are called when the property is first initialized, and before
that its default min and max are 0.0 and 1.0 respectively.
If you configured min_value to 1.0 and max_value to e.g. 3.0, since the
min_value setter can be called before that of max_value (which thus still
defaults to 1.0), the min will be set to 0.99.
Same conflict could happen with a configured max_value of 0 if its setter
is called before that of a valid, negative min value.
If bake interval is a multiple of the curve length, the curve would return NaN for some offset values (when `frac == 0.0`, it matches the start and end of the curve segment so `fmod == 0.0`, `frac` becomes NaN)
```
# Godot 3.1.1
var c = Curve3D.new()
c.add_point(Vector3())
c.add_point(Vector3(0.5,0,0))
c.add_point(Vector3(1,0,0))
c.bake_interval = 0.5
c.interpolate_baked(0.5) == Vector3(NAN, NAN, NAN)
```
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
Yaohua Xiong
Nikola Bunjevac
Hugo Locurcio
Micky
Yuri Sizov
Hendrik Brucker
Raul Santos
Vitika9
reduz
Anilforextra
Rémi Verschelde
Aaron Franke
Lightning_A
Jihyun Yu
Rafał Mikrut
Marcel Admiraal
Marcus Elg
Juan Linietsky
Tomasz Chabora
Maxime Leroy
qarmin
Michael Alexsander Silva Dias
merumelu