* Resource that allows saving textures embedded in scenes or standalone.
* Supports only formats that are portable: Lossy, Lossles or BasisUniversal
This is something I wanted to add for a long time. I made it now because @fire
requires it for importing GLTF2 files with embedded textures, but also this
will allow saving Godot scenes as standalone binary files that will run
in all platforms (because textures will load everywhere).
This is ideal when you want to distribute individual standalone assets online
in games that can be built from Godot scenes.
The UDP method is now called `is_socket_connected` to limit confusion
with the actual host connection status which doesn't make sense in UDP.
The TCP method is completly dropped, use get_status instead.
The only one left is the WebSocketPeer one, which should be fine as is
for now.
We might want to re-add something like this if/when we find a good use case
for it and do the effort to categorize all objects in the API properly.
Until then, it's better to remove that boilerplate since it's not needed.
Closes#18711.
This makes the following error message less likely to be printed
when performing many concurrent HTTP requests:
Condition ' resolving == IP::RESOLVER_INVALID_ID ' is true. returned: ERR_BUG
`DirAccess *` needs to be deleted manually, and this is often forgotten
especially when doing early returns with `ERR_FAIL_COND`.
`DirAccessRef` is deleted automatically when it goes out of scope.
Co-authored-by: bruvzg <7645683+bruvzg@users.noreply.github.com>
* Previous "virtual" classes (which can't be instantiated) are not corretly named "abstract".
* Added a new "virtual" category for classes, they can't be instantiated from the editor, but can be inherited from script and extensions.
* Converted a large amount of classes from "abstract" to "virtual" where it makes sense.
Most classes that make sense have been converted. Missing:
* Physics servers
* VideoStream
* Script* classes.
which will go in a separate PR due to the complexity involved.
enh: Add FLAG_NONE to SaverFlags in ResourceSaver to fix api inconsistency
fix: flags parameter of ResourceSaver::save is now uint32_t to allow flag composition in scripts
Previously, only one line per 100 files was printed.
This also refactors the print statement to use Godot methods and
make it more informative overall.
Using codespell 2.2-dev from current git.
Added `misc/scripts/codespell.sh` to make it easier to run it once in a
while and update the skip and ignore lists.
This was changed in #56943 to allow adding new importers from plugins that
take precedence over built-in ones, but this should be opt-in, not the default
behavior.
Fixes#57730.
Now correctly erases old instances.
The code will likely need overhaul anyway to be usable.
It doesn't apply to editor runs, there's a bunch of inconsistencies on
how to clients are handled, and I don't really understand why multiple
instances are created for a single client/server.
First, we should not insert into cache if the hostname resolution has
failed (as it might be a temporary internet issue), second, the async
resolver should also properly insert into cache.
Took the chance to remove some duplicate code with critical section in
it at the cost of little performance when calling the blocking
resolve_hostname function.
This commit adds a condition to VariantCaster that casts Variants of type OBJECT to any type T, if T is derived from Object.
This change enables a fair bit of code cleanup. First, the Variant implicit cast operators for Node and Control can be removed, which allows for some invalid includes to be removed. Second, helper methods in Tree whose sole purpose was to cast arguments to TreeItem * are no longer necessary.
A few small changes also had to be made to other files, due to the changes cascading down all the includes.
On the only platform where PVRTC is supported (iOS),
ETC2 generally supersedes PVRTC in every possible way. The increased
memory usage is not really a problem thanks to modern iOS' devices
processing power being higher than its Android counterparts.
Each file in Godot has had multiple contributors who co-authored it over the
years, and the information of who was the original person to create that file
is not very relevant, especially when used so inconsistently.
`git blame` is a much better way to know who initially authored or later
modified a given chunk of code, and most IDEs now have good integration to
show this information.
When a request was issued to a server that returned "content-length" header
whose value was greater than that of an "int" we ran into overflow
problems. The fix for this was rather simple by increasing the data
type to `int64_t`
All arrays are now prefixed with `PACKED_` to distinguish them from
GDScript's generic typed arrays.
`RAW_ARRAY` is now `PACKED_BYTE_ARRAY` (RawArray was the name of
PackedByteArray back in Godot 2.x).
-Allows displaying custom options for specific file format variants
-Added support for scene format import to retrieve custom options
This PR is necessary for #54886 to be implemented properly.
Move multiplayer classes to "core/multiplayer" subdir.
Move the RPCConfig and enums (TransferMode, RPCMode) to a separate
file (multiplayer.h), and bind them to the global namespace.
Move the RPC handling code to its own class (RPCManager).
Renames "get_rpc_sender_id" to "get_remote_sender_id".
This commit completely removes the RPC_MODE_MASTER ("master" keyword),
and renames the RPC_MODE_PUPPET to RPC_MODE_AUTHORITY ("auth" keyword).
This commit also renames the "Node.[get|set]_network_master" methods to
"Node.[get|set]_network_authority".
This commit also renames the RPC_MODE_REMOTE constant to RPC_MODE_ANY.
RPC_MODE_MASTER in Godot 3.x meant that a given RPC would be callable by
any puppet peer on the master, while RPC_MODE_PUPPET meant that it would
be callable by the master on any puppet.
Beside proving to be very confusing to the user (referring to where it
could be called instead of who can call it) the RPC_MODE_MASTER is quite
useless. It is almost the same as RPC_MODE_REMOTE (anyone can call) with
the exception that the network master cannot. While this could be useful
to check in some case, in such a function you would anyway need to check
in code who is the caller via get_rpc_sender_id(), so adding the check
there for those rare cases does not warrants a dedicated mode.
Adds ability to add error return documetation to the binder and class reference.
Usage example:
```C++
void MyClass::_bind_method() {
[..]
BIND_METHOD_ERR_RETURN_DOC("load", ERR_FILE_CANT_OPEN, ERR_FILE_UNRECOGNIZED);
}
```
One function of ConfigFile was changed as example.
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
Like the spawn/despawn feature, it can be completely overridden with 2
custom callables.
The callables will be called with the list of tracked objects.
In SERVER mode, objects are automatically tracked, while in CUSTOM mode
you can manually track them via `track`/`untrack` (but that's optional).
The default sync only happens from server to client, with batch updates,
over unreliable channel (but with custom ordering).
The default sync will warn you, if your state representation gets too
big.
Move the former "spawnables" functions to a dedicated
MultiplayerReplicator class.
Support custom overrides in replicator.
Spawn/despawn messages can now contain a state.
The state can be automatically encoded/decoded by passing the desired
object properties to `spawnable_config`.
You can use script properties to optimize the state representation.
2 Callables can be also specified to completely override the default
implementation for sending and receiving the spawn/despawn event.
(9 bytes overhead, and there's room for improvement here).
When using a custom implementation `spawn` and `despawn` can be called
with any Object, `send_spawn`/`send_despawn` can receive any Variant as
a state, and the path is not required.
Two new functions, `spawn` and `despawn`, convey the implementation
independent method for requesting a spawn/despawn of an Object, while
`send_spawn` and `send_despawn` represent the more low-level send event
for a Variant to be used by the custom implementations.
`PackedScene`s can be configured to be spawnable via a new
`MultiplayerAPI.spawnable_config` method.
They can be configured either to be spawned automatically when coming
from the server or to always require verification.
Another method, `MultiplayerAPI.send_spawn` lets you request a spawn on
the remote peers.
When a peer receive a spawn request:
- If it comes from the server and the scene is configured as
`SPAWN_MODE_SERVER`:
- Spawn the scene (instantiate it, add it to tree).
- Emit signal `network_spawn`.
- Else:
- Emit signal `network_spawn_request`.
In a similar way, `despawn`s are handled automatically in
`SPAWN_MODE_SERVER`.
In `SPAWN_MODE_SERVER`, when a new client connects it will also receive,
from the server all the spawned (and not yet despawned) instances.
These methods were broken by 22419082d9
5 years ago and nobody complained, so maybe they're not so useful...
But at least this should restore them to a working state.
Adds a few more complex edge cases which are supported.
Also adds some documentation, simplifies the code a bit and forbids using
double quotes as a delimiter.
This seems to be a pretty old bug, older then originally reported (at
least under certain circumstances).
The IP singleton uses a resolve queue so developers can queue hostnames
for resolution in a separate while keeping the main thread unlocked
(address-resolution OS functions are blocking, and could block for a long
time in case of network disruption).
In most places though, the address resolution function was called with
the mutex locked, causing other functions (querying status, queueing
another hostname, ecc) to block until that resolution ended.
This commit ensures that all calls to OS address resolution are done
with the mutex unlocked.
Variants like dictionaries and arrays can have cyclic references, which
caused `encode_variant` to run an infinite recursion.
Instead of keeping a stack and looking for cyclic references which would
make serialization slower, this commit adds a `MAX_RECURSION_DEPTH`
constant to Variant, and have `encode_variant` keep track of the current
recursion depth, bailing when it's too high since this likely means a
cyclic reference has been encountered.
Used by ENetMultiplayerPeer and WebSocketServer to generate network IDs,
and exposed to the user for p2p networks (e.g. WebRTCMultiplayerPeer)
and custom MultiplayerPeer implementations.
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
* Most resource types now have unique identifiers.
* Applies to text, binary and imported resources.
* File formats reference both by text and UID (when available). UID always has priority.
* Resource UIDs are 64 bits for better compatibility with the engine.
* Can be represented and used textually, example `uuid://dapwmgsmnl28u`.
* A special binary cache file is used and exported, containing the mappings.
Example of how it looks:
```GDScript
[gd_scene load_steps=2 format=3 uid="uid://dw86wq31afig2"]
[ext_resource type="PackedScene" uid="uid://bt36ojelx8q6c" path="res://subscene.scn" id="1_t56hs"]
```
GDScript, shaders and other special resource files can't currently provide UIDs, but this should be doable with special keywords on the files.
This will be reserved for future PRs.
* Friendlier with version control.
* Generates pseudo unique IDs, to minimize conflicts when merging, but still
user readable (so, not UUID).
* Eventually will also allow to have more precisely named sub-resources in
imported files.
* This will allow better reloading on changes (including resources already
loaded) as well as better keeping track of changes on the DCC.
* Keeps backward compatibility with the old formats.
* Binary and text format version incremented to mark breakage in forward
compatibility.
- Move the "sync" property for RPCs to RPCConfig.
- Unify GDScript annotations into a single one:
- `@rpc(master)` # default
- `@rpc(puppet)`
- `@rpc(any)` # former `@remote`
- Implement three additional `@rpc` options:
- The second parameter is the "sync" option (which also calls the
function locally when RPCing). One of "sync", "nosync".
- The third parameter is the transfer mode (reliable, unreliable,
ordered).
- The third parameter is the channel (unused for now).
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
error: comparison is always false due to limited range of data type [-Werror=type-limits]
ERR_FAIL_COND_V_MSG(p_port < 0 || p_port > 65535, ERR_INVALID_PARAMETER, "The local port number must be between 0 and 65535 (inclusive).");
Added new "encode_real" methods for handling real_t, and used them for vector types. Types are encoded based on compilation setting.
But for decoding, always check how it was encoded. This way, serialized data is cross-compatible with Godot compiled with singles and Godot compiled with doubles. At least, in theory.
The error check was added for `FileAccessUnix` but it's not an error when both
`p_src` and `p_length` are zero.
Added correct error checks to all implementations to prevent the actual
erroneous case: `p_src` is nullptr but `p_length > 0` (risk of null pointer
indexing).
Fixes#33564.
This fixes#49261, which was happening because of a deadlock in the resolver mutex. There was leftover old mutex code and it's all be converted to new MutexLock class now.
In this PR:
- Removed rset
- rpc_config can now optionally configure transfer mode
(reliable/unreliable/ordered) and channel (channels are not actually
implemented yet.)
- Refactor how the RPC id is computed to minimize the logic in Node and
scripts that now only needs a single `get_rpc_methods` function.
Add two new functions to the IP class that returns all addresses/aliases associated with a given address.
This is a cherry-pick merge from 010a3433df which was merged in 2.1, and has been updated to build with the latest code.
This merge adds two new methods IP.resolve_hostname_addresses and IP.get_resolve_item_addresses that returns a List of all addresses returned from the DNS request.
Fixes#34541
Renamed MAX_DIGITS to MAX_DECIMALS, since it only changes the
amount of digits after the decimal point.
Increased MAX_DECIMALS to 32, and made String::num use
MAX_DECIMALS consistently. If -1 is passed as
decimal precision to String::num, it now gets changed to
the correct precision based on the number's magnitude,
instead of using printf default(which is 6)
String::num_real also calculates the correct precision now.
Also made the types used in floating-point math more
consistent in a few places.
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
-Enable the trails and set the length in seconds
-Provide a mesh with a skeleton and a skin
-Or, alternatively use one of the built-in TubeTrailMesh/RibbonTrailMesh
-Works deterministically
-Fixed particle collisions (were broken)
-Not working in 2D yet (that will happen next)
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
- For now everything imports multithreaded by default (should work I guess, let's test).
- Controllable per importer
Early test benchmark. 64 large textures (importing as lossless, _not_ as vram) on a mobile i7, 12 threads:
Importing goes down from 46 to 7 seconds.
For VRAM I will change the logic to use a compressing thread in a subsequent PR, as well as implementing Betsy.
* Added option for importers to show an Advanced settings dialog
* Created advanced settings dialog for Scene Importer
* Cleaned up importers (remove many old/unused options)
* Added the ability to customize every node, material, mesh and animation individually
* Saving to animations and meshes to files is now a manual process, making it more predictable
* Added the ability for materials to be replaced by external files (or to be made external, up to you).
* When doubleclicking an impoted scene in the filesystem dock, it automatically shows the import settings instead of asking to open it.
WARNING: Lightmap UV unwrap is not working, it needs to be re-made.
The problem happened because `poll` assumed that when the SSL flag was
true, the `connection` would be a subclass of StreamPeerSSL. However
that invariant could be broken by calling HTTPClient::set_connection
with a `connection` that is not a subclass of StreamPeerSSL.
Fixes#46138
Removes the error message when the network peer is not valid and returns false instead.
This makes it simpler to make games that are both on/offline by replacing server checks of
'''
if is_instance_valid(get_tree().network_peer) and get_tree().is_network_server():
# Do server things
'''
with
'''
if get_tree().is_network_server():
# Do server things
'''
Requires no changes to the docs because both the MultiplayerAPI and SceneTree docs don't mention the error.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
* Add support for decimal numeric entities to String::xml_unescape
* Add more error checks to String::xml_unescape
* Refactor XMLParser to use String::xml_unescape instead of an internal
implementation
-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- Based on C++14's `shared_time_mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
We haven't had a proper implementation for COMPRESS_PVRTC2 (which is PVRTC1 2-bpp) in years,
so let's drop it instead of keeping a compress type which doesn't work.
The other enum values were renamed to clarify that our PVRTC2 and PVRTC4 are respectively
PVRTC1 2-bpp and PVRTC1 4-bpp. PVRTC2 2-bpp and 4-bpp are not implemented yet.
- Avoid spaces in Mono log file names.
- Use a `.log` extension for Mono logs, just like non-Mono logs.
- Use periods to separate hours/minutes/seconds for non-Mono logs.
-Changed how mesh data is organized, hoping to make it more efficient on Vulkan and GLES.
-Removed compression, it now always uses the most efficient format.
-Added support for custom arrays (up to 8 custom formats)
-Added support for 8 weights in skeleton data.
-Added a simple optional versioning system for imported assets, to reimport if binary is newer
-Fixes #43979 (I needed to test)
WARNING:
-NOT backwards compatible with previous 4.x-devel, will most likely never be, but it will force reimport scenes due to version change.
-NOT backwards compatible with 3.x scenes, this will be eventually re-added.
-Skeletons not working any longer, will fix in next PR.
-Moved Expression to use this, removed its own.
-Eventually GDScript/VisualScript/GDNative need to be moved to this.
-Given the JSON functions were hacked-in, removed them and created a new JSONParser class
-Made sure these functions appear properly in documentation, since they will be removed from GDScript
The underscore prefix was used to avoid the conflict between the `RID` class
name and the matching enum value in `Variant::Type`.
This can be fixed differently by prefixing uses of the `RID` class in `Variant`
with the scope resolution operator, as done already for `AABB`.
updated variables to use size_t
removed line break to make code style more consistent
added conditional check to return an error if offset field is used when loading a ZIP package
fixed typo
formatted file
added commit regarding self contained exe files
handled error loging for load zip file with offset
spelling tweak
updated conditional statement for magic check
udpated error message when load Zip file with offset is called
fix CI
Trying to fix CI
fix CI done
Added error message for loading self-contained exe with offset.
Updated documentation.
Fix indent
final fix indent
Updated documentation.
fix indents
Updated doc based on suggestion
Final fix
fixed format
- Enhance directory API
- Fix `FileAccess::exists()` not checking for PackedData being disabled
- Fix moving to the parent directory (`..`)
- Allow absolute paths in existence checks
UDPServer now uses a single socket which is shared with the
PacketPeerUDP it creates and has a new `poll` function to read incoming
packets on that socket and delivers them to the appropriate peer.
PacketPeerUDP created this way never reads from the socket, but are
allowed to write on it using sendto.
This is needed because Windows (unlike Linux/BSD) does not support
packet routing when multiple sockets are bound on the same address/port.
- Use the `.log` file extension (recognized on Windows out of the box)
to better hint that generated files are logs. Some editors provide
dedicated syntax highlighting for those files.
- Use an underscore to separate the basename from the date and
the date from the time in log filenames. This makes the filename
easier to read.
- Keep only 5 log files by default to decrease disk usage in case
messages are spammed.
Semicolons are not necessary after function definitions or control flow
blocks, and having some code use them makes things inconsistent (and
occasionally can mess up `clang-format`'s formatting).
Removing them is tedious work though, I had to do this manually (regex
+ manual review) as I couldn't find a tool for that. All other code
folders would need to get the same treatment.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
-Added LocalVector (needed it)
-Added stb_rect_pack (It's pretty cool, we could probably use it for other stuff too)
-Fixes and changes all around the place
-Added library for 128 bits fixed point (required for Delaunay3D)
This reverts commit ec7b481170.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
Also added an easier way to load native GLSL shaders.
Extras:
Had to fix no-cache for subresources in resource loader, it was not properly working, making shaders not properly reload.
Note:
The precommit hooks are broken because they don't seem to support enums from one class being used in another.
Feel free to fix this after merging this PR.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
The `TextEdit` one was indeed a potential bug.
The `PCKPacker` one seems to be a false positive, it's already in a
`for` loop that depends on `files.size()`.
- Parse `.po` files from `doc/translations/*.po` like already done
with `editor/translations/*.po`.
- Add logic to register a doc translation mapping in `TranslationServer`
and `EditorSettings`.
- Add `DTR()` to lookup the doc translation mapping (similar to `TTR()`).
Strings are automatically dedented and stripped of whitespace to ensure
that they would match the translation catalog.
- Use `DTR()` to translate relevant strings in `EditorHelp`,
`EditorInspector`, `CreateDialog`, `ConnectionsDialog`.
- Small simplification to `TranslationLoaderPO`, the path argument was
not really meaningful.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
EngineDebugger is the new interface to access the debugger.
It tries to be as agnostic as possible on the data that various
subsystems can expose.
It allows 2 types of interactions:
- Profilers:
A subsystem can register a profiler, assigning it a unique name.
That name can be used to activate the profiler or add data to it.
The registered profiler can be composed of up to 3 functions:
- Toggle: called when the profiler is activated/deactivated.
- Add: called whenever data is added to the debugger
(via `EngineDebugger::profiler_add_frame_data`)
- Tick: called every frame (during idle), receives frame times.
- Captures: (Only relevant in remote debugger for now)
A subsystem can register a capture, assigning it a unique name.
When receiving a message, the remote debugger will check if it starts
with `[prefix]:` and call the associated capture with name `prefix`.
Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new
profiler system.
Port SceneDebugger and RemoteDebugger to the new capture system.
The LocalDebugger also uses the new profiler system for scripts
profiling.
- Removed platform-specific implementations.
- Now all semaphores are in-object, unless they need to be conditionally created.
- Similarly to `Mutex`, provided a dummy implementation for when `NO_THREADS` is defined.
- Similarly to `Mutex`, methods are made `const` for easy use in such contexts.
- Language bindings updated: `wait()` and `post()` are now `void`.
- Language bindings updated: `try_wait()` added.
Bonus:
- Rewritten the `#ifdef` in `mutex.h` to meet the code style.
Namely, move the drive dropdown to just the left of the path text box and don't include the former
in the latter.
This improves the UX on Windows.
In the UNIX case, since its concept of drives is (ab)used to provide shortcuts to useful paths, its
dropdown is kept at the original location.
Remove now unnecessary bindings of signal callbacks in the public API.
There might be some false positives that need rebinding if they were
meant to be public.
No regular expressions were harmed in the making of this commit.
(Nah, just kidding.)
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
This attribute is now part of the standard we target so we no longer
need compiler-specific hacks.
Also enables -Wimplicit-fallthrough for Clang now that we can properly
support it. It's already on by default for GCC's -Wextra.
Fixes new warnings raised by Clang's -Wimplicit-fallthrough.
WARNING: Requires C++17 'guaranteed copy elision' to fix ambiguous
operator problems in Variant.
This was added for this commit (and future C++17 uses) in #36457.
UDP sockets can be "connected" to filter packets from a specific source.
In case of a bound socket (e.g. server), a new socket can be created on
the same address/port that will receive all packets that are not
filtered by a more specific socket (e.g. the previously connect socket).
This way, a UDPServer can listen to new packets, and return a new
PacketPeerUDP when receiving one, knowing that is a "new client".
It was added for 3.2 in #27485 to preserve backwards compatibility,
but we can now remove it.
It is still needed in MultiplayerAPI as it's the only way to control
it for the internal put_var calls.
- Now is sent the method ID rather the full function name.
- The passed IDs (Node and Method) are compressed so to use less possible space.
- The variant (INT and BOOL) is now encoded and compressed so to use much less data.
- Optimized RPCMode retrieval for GDScript functions.
- Added checksum to assert the methods are the same across peers.
This work has been kindly sponsored by IMVU.
Used to allocate in stack (via alloca) which causes crashes when trying
to encode big variables.
The buffer grows as needed up to `encode_buffer_max_size` (which is
8MiB by default) and always in power of 2.
Avoids crashes on debug mode. Instead it now breaks the execution and
show the error in-editor. Will still crash on release.
Also add a similar check to Marshalls to ensure the debugger doesn't
crash when trying to serialize the invalid instance.
Unify pack file version and magic to avoid hardcoded literals.
`version.py` now always includes `patch` even for the first release in
a new stable branch (e.g. 3.2). The public name stays without the patch
number, but `Engine.get_version_info()` already included `patch == 0`,
and we can remove some extra handling of undefined `VERSION_PATCH` this
way.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
The calculation used to be wrong when exactly at a power of 2.
`nearest_shift` always return the "next" power of 2
`nearest_shift(4) == 3 # 2^3 = 8`.
On the other hand `next_power_of_2` returns the exact value if that
value is a power of 2 (i.e. `next_power_of_2(4) == 4`).
I.e. :
```
WARN_PRINT(itos(next_power_of_2(4)) + " " + itos(1 << nearest_shift(4)));
// WARNING: ... : 4 8
```
Is this by design?
Near matching was not implemented like in TranslationServer, so a
resource remapped for 'ru' (but not 'ru_RU') would not be used as
fallback if the system locale was 'ru_RU'.
Fixes#34058.
Hugo Locurcio
Rémi Verschelde
bruvzg
Rémi Verschelde
Marc Gilleron
reduz
Fabio Alessandrelli
Haoyu Qiu
keptsecret
kobewi
Pierre-Thomas Meisels
Ricardo Subtil
Max
K. S. Ernest (iFire) Lee
Anilforextra
Max Hilbrunner
TechnoPorg
Lyuma
Omar Polo
Aaron Franke
Cnidarias
Nathan Franke
kleonc
Yuri Roubinsky
Paulb23
Anton Christoffersson
Marcel Admiraal
Gilles Roudière
Lightning_A
ne0fhyk
SaracenOne
Wilson E. Alvarez
K. S. Ernest (iFire) Lee
nikitalita
luz paz
Paweł Fertyk
Pedro J. Estébanez
Morris Tabor
floppyhammer
Chuck
Chuck
Heikki Simojoki
Zae
MaxStgs
Juan Linietsky
Bartłomiej T. Listwon
dam
Alex Hirsch
Anshul7sp1
Pedro Rodrigues
Kyle
Mateo Kuruk Miccino
Henry Conklin
Sergey Minakov
Andrii Doroshenko (Xrayez)
Theogen Ratkin
Andy Savage
Rafał Mikrut
Yilin Ma
Adam Brown
Yakov Borevich
SkyJJ
Adam Bates
Andy Maloney
Jummit
Stijn Hinlopen
Hanif Ariffin
Marcus Elg
Michael Alexsander
lupoDharkael
Thakee Nathees
qarmin
Andrea Catania
George Marques
Joost Heitbrink