godot/thirdparty/icu4c/common/utrie2_builder.cpp

1484 lines
47 KiB
C++

// © 2016 and later: Unicode, Inc. and others.
// License & terms of use: http://www.unicode.org/copyright.html
/*
******************************************************************************
*
* Copyright (C) 2001-2014, International Business Machines
* Corporation and others. All Rights Reserved.
*
******************************************************************************
* file name: utrie2_builder.cpp
* encoding: UTF-8
* tab size: 8 (not used)
* indentation:4
*
* created on: 2008sep26 (split off from utrie2.c)
* created by: Markus W. Scherer
*
* This is a common implementation of a Unicode trie.
* It is a kind of compressed, serializable table of 16- or 32-bit values associated with
* Unicode code points (0..0x10ffff).
* This is the second common version of a Unicode trie (hence the name UTrie2).
* See utrie2.h for a comparison.
*
* This file contains only the builder code.
* See utrie2.c for the runtime and enumeration code.
*/
// #define UTRIE2_DEBUG
#ifdef UTRIE2_DEBUG
# include <stdio.h>
#endif
// #define UCPTRIE_DEBUG
#include "unicode/utypes.h"
#ifdef UCPTRIE_DEBUG
#include "unicode/ucptrie.h"
#include "unicode/umutablecptrie.h"
#include "ucptrie_impl.h"
#endif
#include "cmemory.h"
#include "utrie2.h"
#include "utrie2_impl.h"
#include "utrie.h" // for utrie2_fromUTrie()
/* Implementation notes ----------------------------------------------------- */
/*
* The UTRIE2_SHIFT_1, UTRIE2_SHIFT_2, UTRIE2_INDEX_SHIFT and other values
* have been chosen to minimize trie sizes overall.
* Most of the code is flexible enough to work with a range of values,
* within certain limits.
*
* Exception: Support for separate values for lead surrogate code _units_
* vs. code _points_ was added after the constants were fixed,
* and has not been tested nor particularly designed for different constant values.
* (Especially the utrie2_enum() code that jumps to the special LSCP index-2
* part and back.)
*
* Requires UTRIE2_SHIFT_2<=6. Otherwise 0xc0 which is the top of the ASCII-linear data
* including the bad-UTF-8-data block is not a multiple of UTRIE2_DATA_BLOCK_LENGTH
* and map[block>>UTRIE2_SHIFT_2] (used in reference counting and compaction
* remapping) stops working.
*
* Requires UTRIE2_SHIFT_1>=10 because utrie2_enumForLeadSurrogate()
* assumes that a single index-2 block is used for 0x400 code points
* corresponding to one lead surrogate.
*
* Requires UTRIE2_SHIFT_1<=16. Otherwise one single index-2 block contains
* more than one Unicode plane, and the split of the index-2 table into a BMP
* part and a supplementary part, with a gap in between, would not work.
*
* Requires UTRIE2_INDEX_SHIFT>=1 not because of the code but because
* there is data with more than 64k distinct values,
* for example for Unihan collation with a separate collation weight per
* Han character.
*/
/* Building a trie ----------------------------------------------------------*/
enum {
/** The null index-2 block, following the gap in the index-2 table. */
UNEWTRIE2_INDEX_2_NULL_OFFSET=UNEWTRIE2_INDEX_GAP_OFFSET+UNEWTRIE2_INDEX_GAP_LENGTH,
/** The start of allocated index-2 blocks. */
UNEWTRIE2_INDEX_2_START_OFFSET=UNEWTRIE2_INDEX_2_NULL_OFFSET+UTRIE2_INDEX_2_BLOCK_LENGTH,
/**
* The null data block.
* Length 64=0x40 even if UTRIE2_DATA_BLOCK_LENGTH is smaller,
* to work with 6-bit trail bytes from 2-byte UTF-8.
*/
UNEWTRIE2_DATA_NULL_OFFSET=UTRIE2_DATA_START_OFFSET,
/** The start of allocated data blocks. */
UNEWTRIE2_DATA_START_OFFSET=UNEWTRIE2_DATA_NULL_OFFSET+0x40,
/**
* The start of data blocks for U+0800 and above.
* Below, compaction uses a block length of 64 for 2-byte UTF-8.
* From here on, compaction uses UTRIE2_DATA_BLOCK_LENGTH.
* Data values for 0x780 code points beyond ASCII.
*/
UNEWTRIE2_DATA_0800_OFFSET=UNEWTRIE2_DATA_START_OFFSET+0x780
};
/* Start with allocation of 16k data entries. */
#define UNEWTRIE2_INITIAL_DATA_LENGTH ((int32_t)1<<14)
/* Grow about 8x each time. */
#define UNEWTRIE2_MEDIUM_DATA_LENGTH ((int32_t)1<<17)
static int32_t
allocIndex2Block(UNewTrie2 *trie);
U_CAPI UTrie2 * U_EXPORT2
utrie2_open(uint32_t initialValue, uint32_t errorValue, UErrorCode *pErrorCode) {
UTrie2 *trie;
UNewTrie2 *newTrie;
uint32_t *data;
int32_t i, j;
if(U_FAILURE(*pErrorCode)) {
return NULL;
}
trie=(UTrie2 *)uprv_malloc(sizeof(UTrie2));
newTrie=(UNewTrie2 *)uprv_malloc(sizeof(UNewTrie2));
data=(uint32_t *)uprv_malloc(UNEWTRIE2_INITIAL_DATA_LENGTH*4);
if(trie==NULL || newTrie==NULL || data==NULL) {
uprv_free(trie);
uprv_free(newTrie);
uprv_free(data);
*pErrorCode=U_MEMORY_ALLOCATION_ERROR;
return 0;
}
uprv_memset(trie, 0, sizeof(UTrie2));
trie->initialValue=initialValue;
trie->errorValue=errorValue;
trie->highStart=0x110000;
trie->newTrie=newTrie;
#ifdef UTRIE2_DEBUG
trie->name="open";
#endif
newTrie->data=data;
#ifdef UCPTRIE_DEBUG
newTrie->t3=umutablecptrie_open(initialValue, errorValue, pErrorCode);
#endif
newTrie->dataCapacity=UNEWTRIE2_INITIAL_DATA_LENGTH;
newTrie->initialValue=initialValue;
newTrie->errorValue=errorValue;
newTrie->highStart=0x110000;
newTrie->firstFreeBlock=0; /* no free block in the list */
newTrie->isCompacted=false;
/*
* preallocate and reset
* - ASCII
* - the bad-UTF-8-data block
* - the null data block
*/
for(i=0; i<0x80; ++i) {
newTrie->data[i]=initialValue;
}
for(; i<0xc0; ++i) {
newTrie->data[i]=errorValue;
}
for(i=UNEWTRIE2_DATA_NULL_OFFSET; i<UNEWTRIE2_DATA_START_OFFSET; ++i) {
newTrie->data[i]=initialValue;
}
newTrie->dataNullOffset=UNEWTRIE2_DATA_NULL_OFFSET;
newTrie->dataLength=UNEWTRIE2_DATA_START_OFFSET;
/* set the index-2 indexes for the 2=0x80>>UTRIE2_SHIFT_2 ASCII data blocks */
for(i=0, j=0; j<0x80; ++i, j+=UTRIE2_DATA_BLOCK_LENGTH) {
newTrie->index2[i]=j;
newTrie->map[i]=1;
}
/* reference counts for the bad-UTF-8-data block */
for(; j<0xc0; ++i, j+=UTRIE2_DATA_BLOCK_LENGTH) {
newTrie->map[i]=0;
}
/*
* Reference counts for the null data block: all blocks except for the ASCII blocks.
* Plus 1 so that we don't drop this block during compaction.
* Plus as many as needed for lead surrogate code points.
*/
/* i==newTrie->dataNullOffset */
newTrie->map[i++]=
(0x110000>>UTRIE2_SHIFT_2)-
(0x80>>UTRIE2_SHIFT_2)+
1+
UTRIE2_LSCP_INDEX_2_LENGTH;
j+=UTRIE2_DATA_BLOCK_LENGTH;
for(; j<UNEWTRIE2_DATA_START_OFFSET; ++i, j+=UTRIE2_DATA_BLOCK_LENGTH) {
newTrie->map[i]=0;
}
/*
* set the remaining indexes in the BMP index-2 block
* to the null data block
*/
for(i=0x80>>UTRIE2_SHIFT_2; i<UTRIE2_INDEX_2_BMP_LENGTH; ++i) {
newTrie->index2[i]=UNEWTRIE2_DATA_NULL_OFFSET;
}
/*
* Fill the index gap with impossible values so that compaction
* does not overlap other index-2 blocks with the gap.
*/
for(i=0; i<UNEWTRIE2_INDEX_GAP_LENGTH; ++i) {
newTrie->index2[UNEWTRIE2_INDEX_GAP_OFFSET+i]=-1;
}
/* set the indexes in the null index-2 block */
for(i=0; i<UTRIE2_INDEX_2_BLOCK_LENGTH; ++i) {
newTrie->index2[UNEWTRIE2_INDEX_2_NULL_OFFSET+i]=UNEWTRIE2_DATA_NULL_OFFSET;
}
newTrie->index2NullOffset=UNEWTRIE2_INDEX_2_NULL_OFFSET;
newTrie->index2Length=UNEWTRIE2_INDEX_2_START_OFFSET;
/* set the index-1 indexes for the linear index-2 block */
for(i=0, j=0;
i<UTRIE2_OMITTED_BMP_INDEX_1_LENGTH;
++i, j+=UTRIE2_INDEX_2_BLOCK_LENGTH
) {
newTrie->index1[i]=j;
}
/* set the remaining index-1 indexes to the null index-2 block */
for(; i<UNEWTRIE2_INDEX_1_LENGTH; ++i) {
newTrie->index1[i]=UNEWTRIE2_INDEX_2_NULL_OFFSET;
}
/*
* Preallocate and reset data for U+0080..U+07ff,
* for 2-byte UTF-8 which will be compacted in 64-blocks
* even if UTRIE2_DATA_BLOCK_LENGTH is smaller.
*/
for(i=0x80; i<0x800; i+=UTRIE2_DATA_BLOCK_LENGTH) {
utrie2_set32(trie, i, initialValue, pErrorCode);
}
return trie;
}
static UNewTrie2 *
cloneBuilder(const UNewTrie2 *other) {
UNewTrie2 *trie;
trie=(UNewTrie2 *)uprv_malloc(sizeof(UNewTrie2));
if(trie==NULL) {
return NULL;
}
trie->data=(uint32_t *)uprv_malloc(other->dataCapacity*4);
if(trie->data==NULL) {
uprv_free(trie);
return NULL;
}
#ifdef UCPTRIE_DEBUG
if(other->t3==nullptr) {
trie->t3=nullptr;
} else {
UErrorCode errorCode=U_ZERO_ERROR;
trie->t3=umutablecptrie_clone(other->t3, &errorCode);
}
#endif
trie->dataCapacity=other->dataCapacity;
/* clone data */
uprv_memcpy(trie->index1, other->index1, sizeof(trie->index1));
uprv_memcpy(trie->index2, other->index2, (size_t)other->index2Length*4);
trie->index2NullOffset=other->index2NullOffset;
trie->index2Length=other->index2Length;
uprv_memcpy(trie->data, other->data, (size_t)other->dataLength*4);
trie->dataNullOffset=other->dataNullOffset;
trie->dataLength=other->dataLength;
/* reference counters */
if(other->isCompacted) {
trie->firstFreeBlock=0;
} else {
uprv_memcpy(trie->map, other->map, ((size_t)other->dataLength>>UTRIE2_SHIFT_2)*4);
trie->firstFreeBlock=other->firstFreeBlock;
}
trie->initialValue=other->initialValue;
trie->errorValue=other->errorValue;
trie->highStart=other->highStart;
trie->isCompacted=other->isCompacted;
return trie;
}
U_CAPI UTrie2 * U_EXPORT2
utrie2_clone(const UTrie2 *other, UErrorCode *pErrorCode) {
UTrie2 *trie;
if(U_FAILURE(*pErrorCode)) {
return NULL;
}
if(other==NULL || (other->memory==NULL && other->newTrie==NULL)) {
*pErrorCode=U_ILLEGAL_ARGUMENT_ERROR;
return NULL;
}
trie=(UTrie2 *)uprv_malloc(sizeof(UTrie2));
if(trie==NULL) {
*pErrorCode=U_MEMORY_ALLOCATION_ERROR;
return NULL;
}
uprv_memcpy(trie, other, sizeof(UTrie2));
if(other->memory!=NULL) {
trie->memory=uprv_malloc(other->length);
if(trie->memory!=NULL) {
trie->isMemoryOwned=true;
uprv_memcpy(trie->memory, other->memory, other->length);
/* make the clone's pointers point to its own memory */
trie->index=(uint16_t *)trie->memory+(other->index-(uint16_t *)other->memory);
if(other->data16!=NULL) {
trie->data16=(uint16_t *)trie->memory+(other->data16-(uint16_t *)other->memory);
}
if(other->data32!=NULL) {
trie->data32=(uint32_t *)trie->memory+(other->data32-(uint32_t *)other->memory);
}
}
} else /* other->newTrie!=NULL */ {
trie->newTrie=cloneBuilder(other->newTrie);
}
if(trie->memory==NULL && trie->newTrie==NULL) {
*pErrorCode=U_MEMORY_ALLOCATION_ERROR;
uprv_free(trie);
trie=NULL;
}
return trie;
}
typedef struct NewTrieAndStatus {
UTrie2 *trie;
UErrorCode errorCode;
UBool exclusiveLimit; /* rather than inclusive range end */
} NewTrieAndStatus;
static UBool U_CALLCONV
copyEnumRange(const void *context, UChar32 start, UChar32 end, uint32_t value) {
NewTrieAndStatus *nt=(NewTrieAndStatus *)context;
if(value!=nt->trie->initialValue) {
if(nt->exclusiveLimit) {
--end;
}
if(start==end) {
utrie2_set32(nt->trie, start, value, &nt->errorCode);
} else {
utrie2_setRange32(nt->trie, start, end, value, true, &nt->errorCode);
}
return U_SUCCESS(nt->errorCode);
} else {
return true;
}
}
#ifdef UTRIE2_DEBUG
static long countInitial(const UTrie2 *trie) {
uint32_t initialValue=trie->initialValue;
int32_t length=trie->dataLength;
long count=0;
if(trie->data16!=nullptr) {
for(int32_t i=0; i<length; ++i) {
if(trie->data16[i]==initialValue) { ++count; }
}
} else {
for(int32_t i=0; i<length; ++i) {
if(trie->data32[i]==initialValue) { ++count; }
}
}
return count;
}
static void
utrie_printLengths(const UTrie *trie) {
long indexLength=trie->indexLength;
long dataLength=(long)trie->dataLength;
long totalLength=(long)sizeof(UTrieHeader)+indexLength*2+dataLength*(trie->data32!=NULL ? 4 : 2);
printf("**UTrieLengths** index:%6ld data:%6ld serialized:%6ld\n",
indexLength, dataLength, totalLength);
}
static void
utrie2_printLengths(const UTrie2 *trie, const char *which) {
long indexLength=trie->indexLength;
long dataLength=(long)trie->dataLength;
long totalLength=(long)sizeof(UTrie2Header)+indexLength*2+dataLength*(trie->data32!=NULL ? 4 : 2);
printf("**UTrie2Lengths(%s %s)** index:%6ld data:%6ld countInitial:%6ld serialized:%6ld\n",
which, trie->name, indexLength, dataLength, countInitial(trie), totalLength);
}
#endif
U_CAPI UTrie2 * U_EXPORT2
utrie2_cloneAsThawed(const UTrie2 *other, UErrorCode *pErrorCode) {
NewTrieAndStatus context;
UChar lead;
if(U_FAILURE(*pErrorCode)) {
return NULL;
}
if(other==NULL || (other->memory==NULL && other->newTrie==NULL)) {
*pErrorCode=U_ILLEGAL_ARGUMENT_ERROR;
return NULL;
}
if(other->newTrie!=NULL && !other->newTrie->isCompacted) {
return utrie2_clone(other, pErrorCode); /* clone an unfrozen trie */
}
/* Clone the frozen trie by enumerating it and building a new one. */
context.trie=utrie2_open(other->initialValue, other->errorValue, pErrorCode);
if(U_FAILURE(*pErrorCode)) {
return NULL;
}
context.exclusiveLimit=false;
context.errorCode=*pErrorCode;
utrie2_enum(other, NULL, copyEnumRange, &context);
*pErrorCode=context.errorCode;
for(lead=0xd800; lead<0xdc00; ++lead) {
uint32_t value;
if(other->data32==NULL) {
value=UTRIE2_GET16_FROM_U16_SINGLE_LEAD(other, lead);
} else {
value=UTRIE2_GET32_FROM_U16_SINGLE_LEAD(other, lead);
}
if(value!=other->initialValue) {
utrie2_set32ForLeadSurrogateCodeUnit(context.trie, lead, value, pErrorCode);
}
}
if(U_FAILURE(*pErrorCode)) {
utrie2_close(context.trie);
context.trie=NULL;
}
return context.trie;
}
/* Almost the same as utrie2_cloneAsThawed() but copies a UTrie and freezes the clone. */
U_CAPI UTrie2 * U_EXPORT2
utrie2_fromUTrie(const UTrie *trie1, uint32_t errorValue, UErrorCode *pErrorCode) {
NewTrieAndStatus context;
UChar lead;
if(U_FAILURE(*pErrorCode)) {
return NULL;
}
if(trie1==NULL) {
*pErrorCode=U_ILLEGAL_ARGUMENT_ERROR;
return NULL;
}
context.trie=utrie2_open(trie1->initialValue, errorValue, pErrorCode);
if(U_FAILURE(*pErrorCode)) {
return NULL;
}
context.exclusiveLimit=true;
context.errorCode=*pErrorCode;
utrie_enum(trie1, NULL, copyEnumRange, &context);
*pErrorCode=context.errorCode;
for(lead=0xd800; lead<0xdc00; ++lead) {
uint32_t value;
if(trie1->data32==NULL) {
value=UTRIE_GET16_FROM_LEAD(trie1, lead);
} else {
value=UTRIE_GET32_FROM_LEAD(trie1, lead);
}
if(value!=trie1->initialValue) {
utrie2_set32ForLeadSurrogateCodeUnit(context.trie, lead, value, pErrorCode);
}
}
if(U_SUCCESS(*pErrorCode)) {
utrie2_freeze(context.trie,
trie1->data32!=NULL ? UTRIE2_32_VALUE_BITS : UTRIE2_16_VALUE_BITS,
pErrorCode);
}
#ifdef UTRIE2_DEBUG
if(U_SUCCESS(*pErrorCode)) {
utrie_printLengths(trie1);
utrie2_printLengths(context.trie, "fromUTrie");
}
#endif
if(U_FAILURE(*pErrorCode)) {
utrie2_close(context.trie);
context.trie=NULL;
}
return context.trie;
}
static inline UBool
isInNullBlock(UNewTrie2 *trie, UChar32 c, UBool forLSCP) {
int32_t i2, block;
if(U_IS_LEAD(c) && forLSCP) {
i2=(UTRIE2_LSCP_INDEX_2_OFFSET-(0xd800>>UTRIE2_SHIFT_2))+
(c>>UTRIE2_SHIFT_2);
} else {
i2=trie->index1[c>>UTRIE2_SHIFT_1]+
((c>>UTRIE2_SHIFT_2)&UTRIE2_INDEX_2_MASK);
}
block=trie->index2[i2];
return (UBool)(block==trie->dataNullOffset);
}
static int32_t
allocIndex2Block(UNewTrie2 *trie) {
int32_t newBlock, newTop;
newBlock=trie->index2Length;
newTop=newBlock+UTRIE2_INDEX_2_BLOCK_LENGTH;
if(newTop>UPRV_LENGTHOF(trie->index2)) {
/*
* Should never occur.
* Either UTRIE2_MAX_BUILD_TIME_INDEX_LENGTH is incorrect,
* or the code writes more values than should be possible.
*/
return -1;
}
trie->index2Length=newTop;
uprv_memcpy(trie->index2+newBlock, trie->index2+trie->index2NullOffset, UTRIE2_INDEX_2_BLOCK_LENGTH*4);
return newBlock;
}
static int32_t
getIndex2Block(UNewTrie2 *trie, UChar32 c, UBool forLSCP) {
int32_t i1, i2;
if(U_IS_LEAD(c) && forLSCP) {
return UTRIE2_LSCP_INDEX_2_OFFSET;
}
i1=c>>UTRIE2_SHIFT_1;
i2=trie->index1[i1];
if(i2==trie->index2NullOffset) {
i2=allocIndex2Block(trie);
if(i2<0) {
return -1; /* program error */
}
trie->index1[i1]=i2;
}
return i2;
}
static int32_t
allocDataBlock(UNewTrie2 *trie, int32_t copyBlock) {
int32_t newBlock, newTop;
if(trie->firstFreeBlock!=0) {
/* get the first free block */
newBlock=trie->firstFreeBlock;
trie->firstFreeBlock=-trie->map[newBlock>>UTRIE2_SHIFT_2];
} else {
/* get a new block from the high end */
newBlock=trie->dataLength;
newTop=newBlock+UTRIE2_DATA_BLOCK_LENGTH;
if(newTop>trie->dataCapacity) {
/* out of memory in the data array */
int32_t capacity;
uint32_t *data;
if(trie->dataCapacity<UNEWTRIE2_MEDIUM_DATA_LENGTH) {
capacity=UNEWTRIE2_MEDIUM_DATA_LENGTH;
} else if(trie->dataCapacity<UNEWTRIE2_MAX_DATA_LENGTH) {
capacity=UNEWTRIE2_MAX_DATA_LENGTH;
} else {
/*
* Should never occur.
* Either UNEWTRIE2_MAX_DATA_LENGTH is incorrect,
* or the code writes more values than should be possible.
*/
return -1;
}
data=(uint32_t *)uprv_malloc(capacity*4);
if(data==NULL) {
return -1;
}
uprv_memcpy(data, trie->data, (size_t)trie->dataLength*4);
uprv_free(trie->data);
trie->data=data;
trie->dataCapacity=capacity;
}
trie->dataLength=newTop;
}
uprv_memcpy(trie->data+newBlock, trie->data+copyBlock, UTRIE2_DATA_BLOCK_LENGTH*4);
trie->map[newBlock>>UTRIE2_SHIFT_2]=0;
return newBlock;
}
/* call when the block's reference counter reaches 0 */
static void
releaseDataBlock(UNewTrie2 *trie, int32_t block) {
/* put this block at the front of the free-block chain */
trie->map[block>>UTRIE2_SHIFT_2]=-trie->firstFreeBlock;
trie->firstFreeBlock=block;
}
static inline UBool
isWritableBlock(UNewTrie2 *trie, int32_t block) {
return (UBool)(block!=trie->dataNullOffset && 1==trie->map[block>>UTRIE2_SHIFT_2]);
}
static inline void
setIndex2Entry(UNewTrie2 *trie, int32_t i2, int32_t block) {
int32_t oldBlock;
++trie->map[block>>UTRIE2_SHIFT_2]; /* increment first, in case block==oldBlock! */
oldBlock=trie->index2[i2];
if(0 == --trie->map[oldBlock>>UTRIE2_SHIFT_2]) {
releaseDataBlock(trie, oldBlock);
}
trie->index2[i2]=block;
}
/**
* No error checking for illegal arguments.
*
* @return -1 if no new data block available (out of memory in data array)
* @internal
*/
static int32_t
getDataBlock(UNewTrie2 *trie, UChar32 c, UBool forLSCP) {
int32_t i2, oldBlock, newBlock;
i2=getIndex2Block(trie, c, forLSCP);
if(i2<0) {
return -1; /* program error */
}
i2+=(c>>UTRIE2_SHIFT_2)&UTRIE2_INDEX_2_MASK;
oldBlock=trie->index2[i2];
if(isWritableBlock(trie, oldBlock)) {
return oldBlock;
}
/* allocate a new data block */
newBlock=allocDataBlock(trie, oldBlock);
if(newBlock<0) {
/* out of memory in the data array */
return -1;
}
setIndex2Entry(trie, i2, newBlock);
return newBlock;
}
/**
* @return true if the value was successfully set
*/
static void
set32(UNewTrie2 *trie,
UChar32 c, UBool forLSCP, uint32_t value,
UErrorCode *pErrorCode) {
int32_t block;
if(trie==NULL || trie->isCompacted) {
*pErrorCode=U_NO_WRITE_PERMISSION;
return;
}
#ifdef UCPTRIE_DEBUG
umutablecptrie_set(trie->t3, c, value, pErrorCode);
#endif
block=getDataBlock(trie, c, forLSCP);
if(block<0) {
*pErrorCode=U_MEMORY_ALLOCATION_ERROR;
return;
}
trie->data[block+(c&UTRIE2_DATA_MASK)]=value;
}
U_CAPI void U_EXPORT2
utrie2_set32(UTrie2 *trie, UChar32 c, uint32_t value, UErrorCode *pErrorCode) {
if(U_FAILURE(*pErrorCode)) {
return;
}
if((uint32_t)c>0x10ffff) {
*pErrorCode=U_ILLEGAL_ARGUMENT_ERROR;
return;
}
set32(trie->newTrie, c, true, value, pErrorCode);
}
U_CAPI void U_EXPORT2
utrie2_set32ForLeadSurrogateCodeUnit(UTrie2 *trie,
UChar32 c, uint32_t value,
UErrorCode *pErrorCode) {
if(U_FAILURE(*pErrorCode)) {
return;
}
if(!U_IS_LEAD(c)) {
*pErrorCode=U_ILLEGAL_ARGUMENT_ERROR;
return;
}
set32(trie->newTrie, c, false, value, pErrorCode);
}
static void
writeBlock(uint32_t *block, uint32_t value) {
uint32_t *limit=block+UTRIE2_DATA_BLOCK_LENGTH;
while(block<limit) {
*block++=value;
}
}
/**
* initialValue is ignored if overwrite=true
* @internal
*/
static void
fillBlock(uint32_t *block, UChar32 start, UChar32 limit,
uint32_t value, uint32_t initialValue, UBool overwrite) {
uint32_t *pLimit;
pLimit=block+limit;
block+=start;
if(overwrite) {
while(block<pLimit) {
*block++=value;
}
} else {
while(block<pLimit) {
if(*block==initialValue) {
*block=value;
}
++block;
}
}
}
U_CAPI void U_EXPORT2
utrie2_setRange32(UTrie2 *trie,
UChar32 start, UChar32 end,
uint32_t value, UBool overwrite,
UErrorCode *pErrorCode) {
/*
* repeat value in [start..end]
* mark index values for repeat-data blocks by setting bit 31 of the index values
* fill around existing values if any, if(overwrite)
*/
UNewTrie2 *newTrie;
int32_t block, rest, repeatBlock;
UChar32 limit;
if(U_FAILURE(*pErrorCode)) {
return;
}
if((uint32_t)start>0x10ffff || (uint32_t)end>0x10ffff || start>end) {
*pErrorCode=U_ILLEGAL_ARGUMENT_ERROR;
return;
}
newTrie=trie->newTrie;
if(newTrie==NULL || newTrie->isCompacted) {
*pErrorCode=U_NO_WRITE_PERMISSION;
return;
}
#ifdef UCPTRIE_DEBUG
umutablecptrie_setRange(newTrie->t3, start, end, value, pErrorCode);
#endif
if(!overwrite && value==newTrie->initialValue) {
return; /* nothing to do */
}
limit=end+1;
if(start&UTRIE2_DATA_MASK) {
UChar32 nextStart;
/* set partial block at [start..following block boundary[ */
block=getDataBlock(newTrie, start, true);
if(block<0) {
*pErrorCode=U_MEMORY_ALLOCATION_ERROR;
return;
}
nextStart=(start+UTRIE2_DATA_MASK)&~UTRIE2_DATA_MASK;
if(nextStart<=limit) {
fillBlock(newTrie->data+block, start&UTRIE2_DATA_MASK, UTRIE2_DATA_BLOCK_LENGTH,
value, newTrie->initialValue, overwrite);
start=nextStart;
} else {
fillBlock(newTrie->data+block, start&UTRIE2_DATA_MASK, limit&UTRIE2_DATA_MASK,
value, newTrie->initialValue, overwrite);
return;
}
}
/* number of positions in the last, partial block */
rest=limit&UTRIE2_DATA_MASK;
/* round down limit to a block boundary */
limit&=~UTRIE2_DATA_MASK;
/* iterate over all-value blocks */
if(value==newTrie->initialValue) {
repeatBlock=newTrie->dataNullOffset;
} else {
repeatBlock=-1;
}
while(start<limit) {
int32_t i2;
UBool setRepeatBlock=false;
if(value==newTrie->initialValue && isInNullBlock(newTrie, start, true)) {
start+=UTRIE2_DATA_BLOCK_LENGTH; /* nothing to do */
continue;
}
/* get index value */
i2=getIndex2Block(newTrie, start, true);
if(i2<0) {
*pErrorCode=U_INTERNAL_PROGRAM_ERROR;
return;
}
i2+=(start>>UTRIE2_SHIFT_2)&UTRIE2_INDEX_2_MASK;
block=newTrie->index2[i2];
if(isWritableBlock(newTrie, block)) {
/* already allocated */
if(overwrite && block>=UNEWTRIE2_DATA_0800_OFFSET) {
/*
* We overwrite all values, and it's not a
* protected (ASCII-linear or 2-byte UTF-8) block:
* replace with the repeatBlock.
*/
setRepeatBlock=true;
} else {
/* !overwrite, or protected block: just write the values into this block */
fillBlock(newTrie->data+block,
0, UTRIE2_DATA_BLOCK_LENGTH,
value, newTrie->initialValue, overwrite);
}
} else if(newTrie->data[block]!=value && (overwrite || block==newTrie->dataNullOffset)) {
/*
* Set the repeatBlock instead of the null block or previous repeat block:
*
* If !isWritableBlock() then all entries in the block have the same value
* because it's the null block or a range block (the repeatBlock from a previous
* call to utrie2_setRange32()).
* No other blocks are used multiple times before compacting.
*
* The null block is the only non-writable block with the initialValue because
* of the repeatBlock initialization above. (If value==initialValue, then
* the repeatBlock will be the null data block.)
*
* We set our repeatBlock if the desired value differs from the block's value,
* and if we overwrite any data or if the data is all initial values
* (which is the same as the block being the null block, see above).
*/
setRepeatBlock=true;
}
if(setRepeatBlock) {
if(repeatBlock>=0) {
setIndex2Entry(newTrie, i2, repeatBlock);
} else {
/* create and set and fill the repeatBlock */
repeatBlock=getDataBlock(newTrie, start, true);
if(repeatBlock<0) {
*pErrorCode=U_MEMORY_ALLOCATION_ERROR;
return;
}
writeBlock(newTrie->data+repeatBlock, value);
}
}
start+=UTRIE2_DATA_BLOCK_LENGTH;
}
if(rest>0) {
/* set partial block at [last block boundary..limit[ */
block=getDataBlock(newTrie, start, true);
if(block<0) {
*pErrorCode=U_MEMORY_ALLOCATION_ERROR;
return;
}
fillBlock(newTrie->data+block, 0, rest, value, newTrie->initialValue, overwrite);
}
return;
}
/* compaction --------------------------------------------------------------- */
static inline UBool
equal_int32(const int32_t *s, const int32_t *t, int32_t length) {
while(length>0 && *s==*t) {
++s;
++t;
--length;
}
return (UBool)(length==0);
}
static inline UBool
equal_uint32(const uint32_t *s, const uint32_t *t, int32_t length) {
while(length>0 && *s==*t) {
++s;
++t;
--length;
}
return (UBool)(length==0);
}
static int32_t
findSameIndex2Block(const int32_t *idx, int32_t index2Length, int32_t otherBlock) {
int32_t block;
/* ensure that we do not even partially get past index2Length */
index2Length-=UTRIE2_INDEX_2_BLOCK_LENGTH;
for(block=0; block<=index2Length; ++block) {
if(equal_int32(idx+block, idx+otherBlock, UTRIE2_INDEX_2_BLOCK_LENGTH)) {
return block;
}
}
return -1;
}
static int32_t
findSameDataBlock(const uint32_t *data, int32_t dataLength, int32_t otherBlock, int32_t blockLength) {
int32_t block;
/* ensure that we do not even partially get past dataLength */
dataLength-=blockLength;
for(block=0; block<=dataLength; block+=UTRIE2_DATA_GRANULARITY) {
if(equal_uint32(data+block, data+otherBlock, blockLength)) {
return block;
}
}
return -1;
}
/*
* Find the start of the last range in the trie by enumerating backward.
* Indexes for supplementary code points higher than this will be omitted.
*/
static UChar32
findHighStart(UNewTrie2 *trie, uint32_t highValue) {
const uint32_t *data32;
uint32_t value, initialValue;
UChar32 c, prev;
int32_t i1, i2, j, i2Block, prevI2Block, index2NullOffset, block, prevBlock, nullBlock;
data32=trie->data;
initialValue=trie->initialValue;
index2NullOffset=trie->index2NullOffset;
nullBlock=trie->dataNullOffset;
/* set variables for previous range */
if(highValue==initialValue) {
prevI2Block=index2NullOffset;
prevBlock=nullBlock;
} else {
prevI2Block=-1;
prevBlock=-1;
}
prev=0x110000;
/* enumerate index-2 blocks */
i1=UNEWTRIE2_INDEX_1_LENGTH;
c=prev;
while(c>0) {
i2Block=trie->index1[--i1];
if(i2Block==prevI2Block) {
/* the index-2 block is the same as the previous one, and filled with highValue */
c-=UTRIE2_CP_PER_INDEX_1_ENTRY;
continue;
}
prevI2Block=i2Block;
if(i2Block==index2NullOffset) {
/* this is the null index-2 block */
if(highValue!=initialValue) {
return c;
}
c-=UTRIE2_CP_PER_INDEX_1_ENTRY;
} else {
/* enumerate data blocks for one index-2 block */
for(i2=UTRIE2_INDEX_2_BLOCK_LENGTH; i2>0;) {
block=trie->index2[i2Block+ --i2];
if(block==prevBlock) {
/* the block is the same as the previous one, and filled with highValue */
c-=UTRIE2_DATA_BLOCK_LENGTH;
continue;
}
prevBlock=block;
if(block==nullBlock) {
/* this is the null data block */
if(highValue!=initialValue) {
return c;
}
c-=UTRIE2_DATA_BLOCK_LENGTH;
} else {
for(j=UTRIE2_DATA_BLOCK_LENGTH; j>0;) {
value=data32[block+ --j];
if(value!=highValue) {
return c;
}
--c;
}
}
}
}
}
/* deliver last range */
return 0;
}
/*
* Compact a build-time trie.
*
* The compaction
* - removes blocks that are identical with earlier ones
* - overlaps adjacent blocks as much as possible (if overlap==true)
* - moves blocks in steps of the data granularity
* - moves and overlaps blocks that overlap with multiple values in the overlap region
*
* It does not
* - try to move and overlap blocks that are not already adjacent
*/
static void
compactData(UNewTrie2 *trie) {
#ifdef UTRIE2_DEBUG
int32_t countSame=0, sumOverlaps=0;
#endif
int32_t start, newStart, movedStart;
int32_t blockLength, overlap;
int32_t i, mapIndex, blockCount;
/* do not compact linear-ASCII data */
newStart=UTRIE2_DATA_START_OFFSET;
for(start=0, i=0; start<newStart; start+=UTRIE2_DATA_BLOCK_LENGTH, ++i) {
trie->map[i]=start;
}
/*
* Start with a block length of 64 for 2-byte UTF-8,
* then switch to UTRIE2_DATA_BLOCK_LENGTH.
*/
blockLength=64;
blockCount=blockLength>>UTRIE2_SHIFT_2;
for(start=newStart; start<trie->dataLength;) {
/*
* start: index of first entry of current block
* newStart: index where the current block is to be moved
* (right after current end of already-compacted data)
*/
if(start==UNEWTRIE2_DATA_0800_OFFSET) {
blockLength=UTRIE2_DATA_BLOCK_LENGTH;
blockCount=1;
}
/* skip blocks that are not used */
if(trie->map[start>>UTRIE2_SHIFT_2]<=0) {
/* advance start to the next block */
start+=blockLength;
/* leave newStart with the previous block! */
continue;
}
/* search for an identical block */
if( (movedStart=findSameDataBlock(trie->data, newStart, start, blockLength))
>=0
) {
#ifdef UTRIE2_DEBUG
++countSame;
#endif
/* found an identical block, set the other block's index value for the current block */
for(i=blockCount, mapIndex=start>>UTRIE2_SHIFT_2; i>0; --i) {
trie->map[mapIndex++]=movedStart;
movedStart+=UTRIE2_DATA_BLOCK_LENGTH;
}
/* advance start to the next block */
start+=blockLength;
/* leave newStart with the previous block! */
continue;
}
/* see if the beginning of this block can be overlapped with the end of the previous block */
/* look for maximum overlap (modulo granularity) with the previous, adjacent block */
for(overlap=blockLength-UTRIE2_DATA_GRANULARITY;
overlap>0 && !equal_uint32(trie->data+(newStart-overlap), trie->data+start, overlap);
overlap-=UTRIE2_DATA_GRANULARITY) {}
#ifdef UTRIE2_DEBUG
sumOverlaps+=overlap;
#endif
if(overlap>0 || newStart<start) {
/* some overlap, or just move the whole block */
movedStart=newStart-overlap;
for(i=blockCount, mapIndex=start>>UTRIE2_SHIFT_2; i>0; --i) {
trie->map[mapIndex++]=movedStart;
movedStart+=UTRIE2_DATA_BLOCK_LENGTH;
}
/* move the non-overlapping indexes to their new positions */
start+=overlap;
for(i=blockLength-overlap; i>0; --i) {
trie->data[newStart++]=trie->data[start++];
}
} else /* no overlap && newStart==start */ {
for(i=blockCount, mapIndex=start>>UTRIE2_SHIFT_2; i>0; --i) {
trie->map[mapIndex++]=start;
start+=UTRIE2_DATA_BLOCK_LENGTH;
}
newStart=start;
}
}
/* now adjust the index-2 table */
for(i=0; i<trie->index2Length; ++i) {
if(i==UNEWTRIE2_INDEX_GAP_OFFSET) {
/* Gap indexes are invalid (-1). Skip over the gap. */
i+=UNEWTRIE2_INDEX_GAP_LENGTH;
}
trie->index2[i]=trie->map[trie->index2[i]>>UTRIE2_SHIFT_2];
}
trie->dataNullOffset=trie->map[trie->dataNullOffset>>UTRIE2_SHIFT_2];
/* ensure dataLength alignment */
while((newStart&(UTRIE2_DATA_GRANULARITY-1))!=0) {
trie->data[newStart++]=trie->initialValue;
}
#ifdef UTRIE2_DEBUG
/* we saved some space */
printf("compacting UTrie2: count of 32-bit data words %lu->%lu countSame=%ld sumOverlaps=%ld\n",
(long)trie->dataLength, (long)newStart, (long)countSame, (long)sumOverlaps);
#endif
trie->dataLength=newStart;
}
static void
compactIndex2(UNewTrie2 *trie) {
int32_t i, start, newStart, movedStart, overlap;
/* do not compact linear-BMP index-2 blocks */
newStart=UTRIE2_INDEX_2_BMP_LENGTH;
for(start=0, i=0; start<newStart; start+=UTRIE2_INDEX_2_BLOCK_LENGTH, ++i) {
trie->map[i]=start;
}
/* Reduce the index table gap to what will be needed at runtime. */
newStart+=UTRIE2_UTF8_2B_INDEX_2_LENGTH+((trie->highStart-0x10000)>>UTRIE2_SHIFT_1);
for(start=UNEWTRIE2_INDEX_2_NULL_OFFSET; start<trie->index2Length;) {
/*
* start: index of first entry of current block
* newStart: index where the current block is to be moved
* (right after current end of already-compacted data)
*/
/* search for an identical block */
if( (movedStart=findSameIndex2Block(trie->index2, newStart, start))
>=0
) {
/* found an identical block, set the other block's index value for the current block */
trie->map[start>>UTRIE2_SHIFT_1_2]=movedStart;
/* advance start to the next block */
start+=UTRIE2_INDEX_2_BLOCK_LENGTH;
/* leave newStart with the previous block! */
continue;
}
/* see if the beginning of this block can be overlapped with the end of the previous block */
/* look for maximum overlap with the previous, adjacent block */
for(overlap=UTRIE2_INDEX_2_BLOCK_LENGTH-1;
overlap>0 && !equal_int32(trie->index2+(newStart-overlap), trie->index2+start, overlap);
--overlap) {}
if(overlap>0 || newStart<start) {
/* some overlap, or just move the whole block */
trie->map[start>>UTRIE2_SHIFT_1_2]=newStart-overlap;
/* move the non-overlapping indexes to their new positions */
start+=overlap;
for(i=UTRIE2_INDEX_2_BLOCK_LENGTH-overlap; i>0; --i) {
trie->index2[newStart++]=trie->index2[start++];
}
} else /* no overlap && newStart==start */ {
trie->map[start>>UTRIE2_SHIFT_1_2]=start;
start+=UTRIE2_INDEX_2_BLOCK_LENGTH;
newStart=start;
}
}
/* now adjust the index-1 table */
for(i=0; i<UNEWTRIE2_INDEX_1_LENGTH; ++i) {
trie->index1[i]=trie->map[trie->index1[i]>>UTRIE2_SHIFT_1_2];
}
trie->index2NullOffset=trie->map[trie->index2NullOffset>>UTRIE2_SHIFT_1_2];
/*
* Ensure data table alignment:
* Needs to be granularity-aligned for 16-bit trie
* (so that dataMove will be down-shiftable),
* and 2-aligned for uint32_t data.
*/
while((newStart&((UTRIE2_DATA_GRANULARITY-1)|1))!=0) {
/* Arbitrary value: 0x3fffc not possible for real data. */
trie->index2[newStart++]=(int32_t)0xffff<<UTRIE2_INDEX_SHIFT;
}
#ifdef UTRIE2_DEBUG
/* we saved some space */
printf("compacting UTrie2: count of 16-bit index words %lu->%lu\n",
(long)trie->index2Length, (long)newStart);
#endif
trie->index2Length=newStart;
}
static void
compactTrie(UTrie2 *trie, UErrorCode *pErrorCode) {
UNewTrie2 *newTrie;
UChar32 highStart, suppHighStart;
uint32_t highValue;
newTrie=trie->newTrie;
/* find highStart and round it up */
highValue=utrie2_get32(trie, 0x10ffff);
highStart=findHighStart(newTrie, highValue);
highStart=(highStart+(UTRIE2_CP_PER_INDEX_1_ENTRY-1))&~(UTRIE2_CP_PER_INDEX_1_ENTRY-1);
if(highStart==0x110000) {
highValue=trie->errorValue;
}
/*
* Set trie->highStart only after utrie2_get32(trie, highStart).
* Otherwise utrie2_get32(trie, highStart) would try to read the highValue.
*/
trie->highStart=newTrie->highStart=highStart;
#ifdef UTRIE2_DEBUG
printf("UTrie2: highStart U+%06lx highValue 0x%lx initialValue 0x%lx\n",
(long)highStart, (long)highValue, (long)trie->initialValue);
#endif
if(highStart<0x110000) {
/* Blank out [highStart..10ffff] to release associated data blocks. */
suppHighStart= highStart<=0x10000 ? 0x10000 : highStart;
utrie2_setRange32(trie, suppHighStart, 0x10ffff, trie->initialValue, true, pErrorCode);
if(U_FAILURE(*pErrorCode)) {
return;
}
}
compactData(newTrie);
if(highStart>0x10000) {
compactIndex2(newTrie);
#ifdef UTRIE2_DEBUG
} else {
printf("UTrie2: highStart U+%04lx count of 16-bit index words %lu->%lu\n",
(long)highStart, (long)trie->newTrie->index2Length, (long)UTRIE2_INDEX_1_OFFSET);
#endif
}
/*
* Store the highValue in the data array and round up the dataLength.
* Must be done after compactData() because that assumes that dataLength
* is a multiple of UTRIE2_DATA_BLOCK_LENGTH.
*/
newTrie->data[newTrie->dataLength++]=highValue;
while((newTrie->dataLength&(UTRIE2_DATA_GRANULARITY-1))!=0) {
newTrie->data[newTrie->dataLength++]=trie->initialValue;
}
newTrie->isCompacted=true;
}
/* serialization ------------------------------------------------------------ */
/**
* Maximum length of the runtime index array.
* Limited by its own 16-bit index values, and by uint16_t UTrie2Header.indexLength.
* (The actual maximum length is lower,
* (0x110000>>UTRIE2_SHIFT_2)+UTRIE2_UTF8_2B_INDEX_2_LENGTH+UTRIE2_MAX_INDEX_1_LENGTH.)
*/
#define UTRIE2_MAX_INDEX_LENGTH 0xffff
/**
* Maximum length of the runtime data array.
* Limited by 16-bit index values that are left-shifted by UTRIE2_INDEX_SHIFT,
* and by uint16_t UTrie2Header.shiftedDataLength.
*/
#define UTRIE2_MAX_DATA_LENGTH (0xffff<<UTRIE2_INDEX_SHIFT)
/* Compact and internally serialize the trie. */
U_CAPI void U_EXPORT2
utrie2_freeze(UTrie2 *trie, UTrie2ValueBits valueBits, UErrorCode *pErrorCode) {
UNewTrie2 *newTrie;
UTrie2Header *header;
uint32_t *p;
uint16_t *dest16;
int32_t i, length;
int32_t allIndexesLength;
int32_t dataMove; /* >0 if the data is moved to the end of the index array */
UChar32 highStart;
/* argument check */
if(U_FAILURE(*pErrorCode)) {
return;
}
if( trie==NULL ||
valueBits<0 || UTRIE2_COUNT_VALUE_BITS<=valueBits
) {
*pErrorCode=U_ILLEGAL_ARGUMENT_ERROR;
return;
}
newTrie=trie->newTrie;
if(newTrie==NULL) {
/* already frozen */
UTrie2ValueBits frozenValueBits=
trie->data16!=NULL ? UTRIE2_16_VALUE_BITS : UTRIE2_32_VALUE_BITS;
if(valueBits!=frozenValueBits) {
*pErrorCode=U_ILLEGAL_ARGUMENT_ERROR;
}
return;
}
/* compact if necessary */
if(!newTrie->isCompacted) {
compactTrie(trie, pErrorCode);
if(U_FAILURE(*pErrorCode)) {
return;
}
}
highStart=trie->highStart;
if(highStart<=0x10000) {
allIndexesLength=UTRIE2_INDEX_1_OFFSET;
} else {
allIndexesLength=newTrie->index2Length;
}
if(valueBits==UTRIE2_16_VALUE_BITS) {
dataMove=allIndexesLength;
} else {
dataMove=0;
}
/* are indexLength and dataLength within limits? */
if( /* for unshifted indexLength */
allIndexesLength>UTRIE2_MAX_INDEX_LENGTH ||
/* for unshifted dataNullOffset */
(dataMove+newTrie->dataNullOffset)>0xffff ||
/* for unshifted 2-byte UTF-8 index-2 values */
(dataMove+UNEWTRIE2_DATA_0800_OFFSET)>0xffff ||
/* for shiftedDataLength */
(dataMove+newTrie->dataLength)>UTRIE2_MAX_DATA_LENGTH
) {
*pErrorCode=U_INDEX_OUTOFBOUNDS_ERROR;
return;
}
/* calculate the total serialized length */
length=sizeof(UTrie2Header)+allIndexesLength*2;
if(valueBits==UTRIE2_16_VALUE_BITS) {
length+=newTrie->dataLength*2;
} else {
length+=newTrie->dataLength*4;
}
trie->memory=uprv_malloc(length);
if(trie->memory==NULL) {
*pErrorCode=U_MEMORY_ALLOCATION_ERROR;
return;
}
trie->length=length;
trie->isMemoryOwned=true;
trie->indexLength=allIndexesLength;
trie->dataLength=newTrie->dataLength;
if(highStart<=0x10000) {
trie->index2NullOffset=0xffff;
} else {
trie->index2NullOffset=static_cast<uint16_t>(UTRIE2_INDEX_2_OFFSET+newTrie->index2NullOffset);
}
trie->dataNullOffset=(uint16_t)(dataMove+newTrie->dataNullOffset);
trie->highValueIndex=dataMove+trie->dataLength-UTRIE2_DATA_GRANULARITY;
/* set the header fields */
header=(UTrie2Header *)trie->memory;
header->signature=UTRIE2_SIG; /* "Tri2" */
header->options=(uint16_t)valueBits;
header->indexLength=(uint16_t)trie->indexLength;
header->shiftedDataLength=(uint16_t)(trie->dataLength>>UTRIE2_INDEX_SHIFT);
header->index2NullOffset=trie->index2NullOffset;
header->dataNullOffset=trie->dataNullOffset;
header->shiftedHighStart=(uint16_t)(highStart>>UTRIE2_SHIFT_1);
/* fill the index and data arrays */
dest16=(uint16_t *)(header+1);
trie->index=dest16;
/* write the index-2 array values shifted right by UTRIE2_INDEX_SHIFT, after adding dataMove */
p=(uint32_t *)newTrie->index2;
for(i=UTRIE2_INDEX_2_BMP_LENGTH; i>0; --i) {
*dest16++=(uint16_t)((dataMove + *p++)>>UTRIE2_INDEX_SHIFT);
}
/* write UTF-8 2-byte index-2 values, not right-shifted */
for(i=0; i<(0xc2-0xc0); ++i) { /* C0..C1 */
*dest16++=(uint16_t)(dataMove+UTRIE2_BAD_UTF8_DATA_OFFSET);
}
for(; i<(0xe0-0xc0); ++i) { /* C2..DF */
*dest16++=(uint16_t)(dataMove+newTrie->index2[i<<(6-UTRIE2_SHIFT_2)]);
}
if(highStart>0x10000) {
int32_t index1Length=(highStart-0x10000)>>UTRIE2_SHIFT_1;
int32_t index2Offset=UTRIE2_INDEX_2_BMP_LENGTH+UTRIE2_UTF8_2B_INDEX_2_LENGTH+index1Length;
/* write 16-bit index-1 values for supplementary code points */
p=(uint32_t *)newTrie->index1+UTRIE2_OMITTED_BMP_INDEX_1_LENGTH;
for(i=index1Length; i>0; --i) {
*dest16++=(uint16_t)(UTRIE2_INDEX_2_OFFSET + *p++);
}
/*
* write the index-2 array values for supplementary code points,
* shifted right by UTRIE2_INDEX_SHIFT, after adding dataMove
*/
p=(uint32_t *)newTrie->index2+index2Offset;
for(i=newTrie->index2Length-index2Offset; i>0; --i) {
*dest16++=(uint16_t)((dataMove + *p++)>>UTRIE2_INDEX_SHIFT);
}
}
/* write the 16/32-bit data array */
switch(valueBits) {
case UTRIE2_16_VALUE_BITS:
/* write 16-bit data values */
trie->data16=dest16;
trie->data32=NULL;
p=newTrie->data;
for(i=newTrie->dataLength; i>0; --i) {
*dest16++=(uint16_t)*p++;
}
break;
case UTRIE2_32_VALUE_BITS:
/* write 32-bit data values */
trie->data16=NULL;
trie->data32=(uint32_t *)dest16;
uprv_memcpy(dest16, newTrie->data, (size_t)newTrie->dataLength*4);
break;
default:
*pErrorCode=U_ILLEGAL_ARGUMENT_ERROR;
return;
}
#ifdef UTRIE2_DEBUG
utrie2_printLengths(trie, "");
#endif
#ifdef UCPTRIE_DEBUG
umutablecptrie_setName(newTrie->t3, trie->name);
ucptrie_close(
umutablecptrie_buildImmutable(
newTrie->t3, UCPTRIE_TYPE_FAST, (UCPTrieValueWidth)valueBits, pErrorCode));
#endif
/* Delete the UNewTrie2. */
uprv_free(newTrie->data);
uprv_free(newTrie);
trie->newTrie=NULL;
}