diff --git a/docs/guide/11-deploying.md b/docs/guide/11-deploying.md
new file mode 100644
index 00000000..5afd1898
--- /dev/null
+++ b/docs/guide/11-deploying.md
@@ -0,0 +1,330 @@
++++
+summary = "how to deploy a Rocket application to production"
++++
+
+# Deploying
+
+This section describes deploying Rocket applications to production. It provides
+a general overview as well as concrete, reusable examples for common deployment
+scenarios including [self-managed deployments], [containerization], and
+[fully-managed deployments].
+
+! note: Rocket does not endorse or prefer any particular tools or services.
+
+  Rocket does not endorse or prefer any specific tools or services mentioned in
+  this guide. They are mentioned in exposition only. Rocket is agnostic to its
+  deployment environment.
+
+[containerization]: #containerization
+[self-managed deployments]: #self-managed
+[fully-managed deployments]: #fully-managed
+
+## Overview
+
+For any deployment, it's important to keep in mind:
+
+  1. **Configuration**
+
+     Minimally, Rocket will need to be configured to listen on the correct
+     **port** and **address**, typically port `80` or `8080` and address
+     `0.0.0.0`. Your deployment environment may have different requirements.
+     Recall that by default, you can set the address and port via the
+     environment variables `ROCKET_ADDRESS` and `ROCKET_PORT` as well as through
+     [many other means](../configuration).
+
+  2. **Asset Bundling**
+
+     If your application serves assets or leverages templates, you may need to
+     bundle those assets with your application binary. For example, if you serve
+     static assets from the `./static` directory and enable templates, you'll
+     need to ensure that those directories are present and **in the current
+     working directory** that your application binary starts in.
+
+     ```rust
+     # #[macro_use] extern crate rocket;
+
+     use rocket::fs::FileServer;
+     use rocket_dyn_templates::Template;
+
+     #[launch]
+     fn rocket() -> _ {
+         rocket::build()
+             .mount("/", FileServer::from("./static"))
+             .attach(Template::fairing())
+     }
+     ```
+
+     For the application above, assuming the `template_dir` configuration
+     parameter hasn't been changed, you'll need to ensure that the `static` and
+     `templates` directories are placed in the current working directory that
+     the application will start in. Otherwise, Rocket will refuse to launch.
+
+  3. **Load Balancing**
+
+     Rocket does not yet have robust support for [DDoS mitigation], so a
+     production deployment will require placing Rocket behind a load balancer or
+     reverse proxy that does. If you are deploying your Rocket application to
+     managed environments such as Kubernetes, Heroku, or Google Cloud Run, this
+     will be handled for you automatically. However, if you're deploying to a
+     self-managed environment such as a VPS, we recommend placing Rocket behind
+     a mature reverse proxy such as HAProxy or NGINX.
+
+  4. **Service Management**
+
+     As your application matures, you'll need to deploy updated versions to your
+     production environment, stopping the existing application and starting the
+     new one in its place. In a managed environment, you can likely rely on the
+     environment to provide these mechanisms. In a self-managed environment,
+     using a service manager like `systemd`, _in addition_ to a reverse proxy,
+     is recommended.
+
+     In either case, it's important to know that once a Rocket application has
+     started, it will run until [graceful shutdown] is initiated. Your
+     application should leverage Rocket's graceful shutdown mechanisms such as
+     the [`Shutdown`] future and [shutdown fairings] to clean-up resources
+     before terminating. You should also ensure that the graceful shutdown
+     configuration is aligned with your environment. For example, Kubernetes
+     issues a `SIGTERM` signal to initiate termination which Rocket listens for
+     by default, but other environments may send other signals which you might
+     need to enable as [triggers].
+
+The following section addresses these concerns and more for common deployment
+scenarios.
+
+[DDoS mitigation]: @github/issues/1405
+[graceful shutdown]: @api/master/rocket/shutdown/struct.ShutdownConfig.html
+[`Shutdown`]: @api/master/rocket/struct.Shutdown.html
+[shutdown fairings]: @api/master/rocket/fairing/trait.Fairing.html#shutdown
+[triggers]: @api/master/rocket/shutdown/struct.ShutdownConfig.html#triggers
+
+## Common Scenarios
+
+### Self-Managed
+
+In a _self-managed_ environment, you are typically responsible for all facets of
+deployment and service management. In exchange, a self-managed environment
+typically incurs the lowest financial cost.
+
+You must decide whether you manage your Rocket application _directly_, by
+installing, configuring, and running a service manager, load balancer, and
+Rocket application, or _indirectly_ by installing and configuring an application
+management service like [kubernetes], [k3s], or [dokku]. Because indirect
+self-management typically revolves around [containerization], covered in the
+next section, we focus on _direct_ self-management here.
+
+[kubernetes]: https://kubernetes.io/
+[k3s]: https://k3s.io/
+[dokku]: https://dokku.com/
+
+Our recommendation for a direct self-managed deployment is to:
+
+  - **Compile for the remote target (i.e, the VPS), bundle, and copy.**
+
+    Compile your application for the remote target and bundle the binary with
+    its assets. You may need to cross-compile for the remote target: we
+    recommend using [`cargo-zigbuild`]. Before cross-compiling, you'll also need
+    to install the Rust toolchain for the target.
+
+    The script below performs these steps, producing a gzipped archive ready to
+    be copied to a remote server.
+
+    ```sh
+    ## configure these for your environment
+    PKG="app"                                    # cargo package name
+    TARGET="x86_64-unknown-linux-gnu"            # remote target
+    ASSETS=("Rocket.toml" "static" "templates")  # list of assets to bundle
+    BUILD_DIR="target/${TARGET}/release"         # cargo build directory
+
+    ## ensure target toolchain is present
+    rustup target add $TARGET
+
+    ## cross-compile
+    cargo zigbuild --target $TARGET --release
+
+    ## bundle
+    tar -cvzf "${PKG}.tar.gz" "${ASSETS[@]}" -C "${BUILD_DIR}" "${PKG}"
+    ```
+
+  - **Run the application as a managed service.**
+
+    Once the bundle is at the remote server, use a service manager to start,
+    monitor, and stop the application. As an example, assuming the bundle
+    produced by the script above was extracted to `/www/pkg`, the following
+    `systemd` service file defines a service for the application:
+
+    ```ini
+    [Unit]
+    Description=Rocket Application
+    After=network.target
+
+    [Service]
+    Type=simple
+    WorkingDirectory=/www/pkg
+    ExecStart=/www/pkg/pkg
+    User=pkg
+    Group=pkg
+    Restart=always
+
+    [Install]
+    WantedBy=multi-user.target
+    ```
+
+    You'll want to modify the service file as needed. Consider particularly the
+    `User` and `Group`: that user/group will need to be authorized to access the
+    `WorkingDirectory`.
+
+    Write the service file to the `systemd` services directory (for example,
+    `/etc/systemd/system/pkg.service`). You can now interact with the service as
+    usual:
+
+    ```sh
+    systemctl [status,enable,start,stop,restart,disable] pkg
+    ```
+
+    If the service is running but the server doesn't appear to be responding,
+    ensure that you've set the address and port you expect in the `[default]`,
+    `[global]`, and/or `[production]` sections of `Rocket.toml` or via another
+    configuration source. For example, you may wish to set systemd `Service`
+    environment variables:
+
+    ```diff
+    [Service]
+    + Environment=ROCKET_ADDRESS=127.0.0.1
+    + Environment=ROCKET_PORT=8000
+    ```
+
+  - **Configure a reverse proxy for the application.**
+
+    Finally, configure a reverse proxy to serve requests to the running
+    application server. As an example, a simple NGINX reverse proxy
+    configuration file for the application above might look like:
+
+    ```conf
+    server {
+        listen 80;
+
+        location / {
+            proxy_pass http://127.0.0.1:8000;
+            proxy_set_header X-Real-IP $remote_addr;
+            proxy_set_header X-Forwarded-Proto $scheme;
+        }
+    }
+    ```
+
+    Note that we configure NGINX to forward the actual remote IP via the
+    `X-Real-IP` header, which Rocket uses by default via [`ip_header`].
+    Additionally, the scheme is forwarded via `X-Forwarded-Proto`, but it must
+    be explicitly configured via [`proxy_proto_header`] for Rocket to consider.
+
+[`cargo-zigbuild`]: https://github.com/rust-cross/cargo-zigbuild
+[`ip_header`]: @api/master/rocket/config/struct.Config.html#structfield.ip_header
+[`proxy_proto_header`]: @api/master/rocket/config/struct.Config.html#structfield.proxy_proto_header
+
+### Containerization
+
+In a _containerization_ environment, you are responsible for writing a
+`Dockerfile` or `Containerfile` which you provide to an application platform.
+The platform may be self-managed, as with [k3s] or [dokku], or fully-managed, as
+with Google Cloud Run or Heroku.
+
+Below you'll find an example of a `Dockerfile` that:
+
+  - Builds the application with the latest stable Rust compiler.
+  - Uses `--mount=type=cache` to avoid recompiling dependencies.
+  - Uses a second stage to create a slim (~100MiB), ready-to-deploy image with
+    only what's needed.
+  - Bundles all of an application's assets in the container.
+
+```dockerfile
+FROM docker.io/rust:1-slim-bookworm AS build
+
+## cargo package name: customize here or provide via --build-arg
+ARG pkg=rocket-app
+
+WORKDIR /build
+
+COPY . .
+
+RUN --mount=type=cache,target=/build/target \
+    --mount=type=cache,target=/usr/local/cargo/registry \
+    --mount=type=cache,target=/usr/local/cargo/git \
+    set -eux; \
+    cargo build --release; \
+    objcopy --compress-debug-sections target/release/$pkg ./main
+
+################################################################################
+
+FROM docker.io/debian:bookworm-slim
+
+WORKDIR /app
+
+## copy the main binary
+COPY --from=build /build/main ./
+
+## copy runtime assets which may or may not exist
+COPY --from=build /build/Rocket.tom[l] ./static
+COPY --from=build /build/stati[c] ./static
+COPY --from=build /build/template[s] ./templates
+
+## ensure the container listens globally on port 8080
+ENV ROCKET_ADDRESS=0.0.0.0
+ENV ROCKET_PORT=8080
+
+CMD ./main
+```
+
+You will need to modify the `pkg` `ARG` or provide it via the command-line:
+
+```sh
+docker build --build-arg pkg=cargo_package_name -t app  .
+```
+
+You may also need to make the following changes:
+
+  * Add/remove/modify `ENV` variables as needed.
+  * Modify the expected `target/release/$pkg` directory.
+  * Add more assets to `COPY` to the final image.
+
+Finally, we recommend the following `.dockerignore` file to avoid copying
+unnecessary artifacts:
+
+```gitignore
+target
+.cargo
+**/*.sh
+**/*.tar.gz
+```
+
+### Fully-Managed
+
+In a _fully-managed_ environment, you provide a service with your source code
+and instructions on how to build and run your application. The `Dockerfile` in
+the [containerization] section, coupled with a configuration file that instructs
+the service to build it, may be one such example.
+
+Because the specifics on deploying to a fully-managed environment depend on the
+environment, we provide only the following general guidelines:
+
+  * **Ensure the address and port are set as required.**
+
+    Most environments require your application to listen on `0.0.0.0`. Ensure
+    `ROCKET_ADDRESS=0.0.0.0`.
+
+    Some environments require your application to listen on specific ports.
+    Remember to set the port as required. For example, if the service requires
+    your application to listen on a port provided by a `$PORT` environment
+    variable, set `ROCKET_PORT=$PORT` before starting your application.
+
+  * **Compile or run with `--release`.**
+
+    Ensure that you run `cargo` commands with `--release`. Besides compiling
+    with optimizations, compiling with `--release` sets the default
+    [configuration profile] to `release`.
+
+  * **Enable debug logging if the application misbehaves.**
+
+    The default log level in `--release` (the release profile) is `critical`.
+    This level may omit messages helpful in understanding application
+    misbehavior. To reenable those messages, set `ROCKET_LOG_LEVEL=debug`.
+
+[configuration profile]: ../configuration/#profiles
diff --git a/docs/guide/11-pastebin.md b/docs/guide/12-pastebin.md
similarity index 100%
rename from docs/guide/11-pastebin.md
rename to docs/guide/12-pastebin.md
diff --git a/docs/guide/12-conclusion.md b/docs/guide/13-conclusion.md
similarity index 100%
rename from docs/guide/12-conclusion.md
rename to docs/guide/13-conclusion.md
diff --git a/docs/guide/13-faq.md b/docs/guide/14-faq.md
similarity index 100%
rename from docs/guide/13-faq.md
rename to docs/guide/14-faq.md