godot/doc/classes/Area.xml

<?xml version="1.0" encoding="UTF-8" ?>
<class name="Area" inherits="CollisionObject" category="Core" version="3.1">
	<brief_description>
		General purpose area node for detection and 3D physics influence.
	</brief_description>
	<description>
		3D area that detects [CollisionObject] nodes overlapping, entering, or exiting. Can also alter or override local physics parameters (gravity, damping).
	</description>
	<tutorials>
	</tutorials>
	<demos>
	</demos>
	<methods>
		<method name="get_collision_layer_bit" qualifiers="const">
			<return type="bool">
			</return>
			<argument index="0" name="bit" type="int">
			</argument>
			<description>
				Returns an individual bit on the layer mask.
			</description>
		</method>
		<method name="get_collision_mask_bit" qualifiers="const">
			<return type="bool">
			</return>
			<argument index="0" name="bit" type="int">
			</argument>
			<description>
				Returns an individual bit on the collision mask.
			</description>
		</method>
		<method name="get_overlapping_areas" qualifiers="const">
			<return type="Array">
			</return>
			<description>
				Returns a list of intersecting [code]Area[/code]s. For performance reasons (collisions are all processed at the same time) this list is modified once during the physics step, not immediately after objects are moved. Consider using signals instead.
			</description>
		</method>
		<method name="get_overlapping_bodies" qualifiers="const">
			<return type="Array">
			</return>
			<description>
				Returns a list of intersecting [PhysicsBody]s. For performance reasons (collisions are all processed at the same time) this list is modified once during the physics step, not immediately after objects are moved. Consider using signals instead.
			</description>
		</method>
		<method name="overlaps_area" qualifiers="const">
			<return type="bool">
			</return>
			<argument index="0" name="area" type="Node">
			</argument>
			<description>
				If [code]true[/code], the given area overlaps the Area. Note that the result of this test is not immediate after moving objects. For performance, list of overlaps is updated once per frame and before the physics step. Consider using signals instead.
			</description>
		</method>
		<method name="overlaps_body" qualifiers="const">
			<return type="bool">
			</return>
			<argument index="0" name="body" type="Node">
			</argument>
			<description>
				If [code]true[/code], the given body overlaps the Area. Note that the result of this test is not immediate after moving objects. For performance, list of overlaps is updated once per frame and before the physics step. Consider using signals instead.
			</description>
		</method>
		<method name="set_collision_layer_bit">
			<return type="void">
			</return>
			<argument index="0" name="bit" type="int">
			</argument>
			<argument index="1" name="value" type="bool">
			</argument>
			<description>
				Set/clear individual bits on the layer mask. This simplifies editing this [code]Area[/code]'s layers.
			</description>
		</method>
		<method name="set_collision_mask_bit">
			<return type="void">
			</return>
			<argument index="0" name="bit" type="int">
			</argument>
			<argument index="1" name="value" type="bool">
			</argument>
			<description>
				Set/clear individual bits on the collision mask. This simplifies editing which [code]Area[/code] layers this [code]Area[/code] scans.
			</description>
		</method>
	</methods>
	<members>
		<member name="angular_damp" type="float" setter="set_angular_damp" getter="get_angular_damp">
			The rate at which objects stop spinning in this area. Represents the angular velocity lost per second. Values range from [code]0[/code] (no damping) to [code]1[/code] (full damping).
		</member>
		<member name="audio_bus_name" type="String" setter="set_audio_bus" getter="get_audio_bus">
			The name of the area's audio bus.
		</member>
		<member name="audio_bus_override" type="bool" setter="set_audio_bus_override" getter="is_overriding_audio_bus">
			If [code]true[/code], the area's audio bus overrides the default audio bus. Default value: [code]false[/code].
		</member>
		<member name="collision_layer" type="int" setter="set_collision_layer" getter="get_collision_layer">
			The area's physics layer(s). Collidable objects can exist in any of 32 different layers. A contact is detected if object A is in any of the layers that object B scans, or object B is in any layers that object A scans. See also [member collision_mask].
		</member>
		<member name="collision_mask" type="int" setter="set_collision_mask" getter="get_collision_mask">
			The physics layers this area scans to determine collision detection.
		</member>
		<member name="gravity" type="float" setter="set_gravity" getter="get_gravity">
			The area's gravity intensity (ranges from -1024 to 1024). This value multiplies the gravity vector. This is useful to alter the force of gravity without altering its direction.
		</member>
		<member name="gravity_distance_scale" type="float" setter="set_gravity_distance_scale" getter="get_gravity_distance_scale">
			The falloff factor for point gravity. The greater the value, the faster gravity decreases with distance.
		</member>
		<member name="gravity_point" type="bool" setter="set_gravity_is_point" getter="is_gravity_a_point">
			If [code]true[/code], gravity is calculated from a point (set via [member gravity_vec]). Also see [member space_override]. Default value: [code]false[/code].
		</member>
		<member name="gravity_vec" type="Vector3" setter="set_gravity_vector" getter="get_gravity_vector">
			The area's gravity vector (not normalized). If gravity is a point (see [member gravity_point]), this will be the point of attraction.
		</member>
		<member name="linear_damp" type="float" setter="set_linear_damp" getter="get_linear_damp">
			The rate at which objects stop moving in this area. Represents the linear velocity lost per second. Values range from [code]0[/code] (no damping) to [code]1[/code] (full damping).
		</member>
		<member name="monitorable" type="bool" setter="set_monitorable" getter="is_monitorable">
			If [code]true[/code], other monitoring areas can detect this area. Default value: [code]true[/code].
		</member>
		<member name="monitoring" type="bool" setter="set_monitoring" getter="is_monitoring">
			If [code]true[/code], the area detects bodies or areas entering and exiting it. Default value: [code]true[/code].
		</member>
		<member name="priority" type="float" setter="set_priority" getter="get_priority">
			The area's priority. Higher priority areas are processed first. Default value: 0.
		</member>
		<member name="reverb_bus_amount" type="float" setter="set_reverb_amount" getter="get_reverb_amount">
			The degree to which this area applies reverb to its associated audio. Ranges from [code]0[/code] to [code]1[/code] with [code]0.1[/code] precision.
		</member>
		<member name="reverb_bus_enable" type="bool" setter="set_use_reverb_bus" getter="is_using_reverb_bus">
			If [code]true[/code], the area applies reverb to its associated audio.
		</member>
		<member name="reverb_bus_name" type="String" setter="set_reverb_bus" getter="get_reverb_bus">
			The reverb bus name to use for this area's associated audio.
		</member>
		<member name="reverb_bus_uniformity" type="float" setter="set_reverb_uniformity" getter="get_reverb_uniformity">
			The degree to which this area's reverb is a uniform effect. Ranges from [code]0[/code] to [code]1[/code] with [code]0.1[/code] precision.
		</member>
		<member name="space_override" type="int" setter="set_space_override_mode" getter="get_space_override_mode" enum="Area.SpaceOverride">
			Override mode for gravity and damping calculations within this area. See [enum Area.SpaceOverride] for possible values.
		</member>
	</members>
	<signals>
		<signal name="area_entered">
			<argument index="0" name="area" type="Area">
			</argument>
			<description>
				Emitted when another area enters.
			</description>
		</signal>
		<signal name="area_exited">
			<argument index="0" name="area" type="Area">
			</argument>
			<description>
				Emitted when another area exits.
			</description>
		</signal>
		<signal name="area_shape_entered">
			<argument index="0" name="area_id" type="int">
			</argument>
			<argument index="1" name="area" type="Area">
			</argument>
			<argument index="2" name="area_shape" type="int">
			</argument>
			<argument index="3" name="self_shape" type="int">
			</argument>
			<description>
				Emitted when another area enters, reporting which areas overlapped.
			</description>
		</signal>
		<signal name="area_shape_exited">
			<argument index="0" name="area_id" type="int">
			</argument>
			<argument index="1" name="area" type="Area">
			</argument>
			<argument index="2" name="area_shape" type="int">
			</argument>
			<argument index="3" name="self_shape" type="int">
			</argument>
			<description>
				Emitted when another area exits, reporting which areas were overlapping.
			</description>
		</signal>
		<signal name="body_entered">
			<argument index="0" name="body" type="Node">
			</argument>
			<description>
				Emitted when a [PhysicsBody] object enters.
			</description>
		</signal>
		<signal name="body_exited">
			<argument index="0" name="body" type="Node">
			</argument>
			<description>
				Emitted when a [PhysicsBody] object exits.
			</description>
		</signal>
		<signal name="body_shape_entered">
			<argument index="0" name="body_id" type="int">
			</argument>
			<argument index="1" name="body" type="Node">
			</argument>
			<argument index="2" name="body_shape" type="int">
			</argument>
			<argument index="3" name="area_shape" type="int">
			</argument>
			<description>
				Emitted when a [PhysicsBody] object enters, reporting which shapes overlapped.
			</description>
		</signal>
		<signal name="body_shape_exited">
			<argument index="0" name="body_id" type="int">
			</argument>
			<argument index="1" name="body" type="Node">
			</argument>
			<argument index="2" name="body_shape" type="int">
			</argument>
			<argument index="3" name="area_shape" type="int">
			</argument>
			<description>
				Emitted when a [PhysicsBody] object exits, reporting which shapes were overlapping.
			</description>
		</signal>
	</signals>
	<constants>
		<constant name="SPACE_OVERRIDE_DISABLED" value="0" enum="SpaceOverride">
			This area does not affect gravity/damping.
		</constant>
		<constant name="SPACE_OVERRIDE_COMBINE" value="1" enum="SpaceOverride">
			This area adds its gravity/damping values to whatever has been calculated so far (in [member priority] order).
		</constant>
		<constant name="SPACE_OVERRIDE_COMBINE_REPLACE" value="2" enum="SpaceOverride">
			This area adds its gravity/damping values to whatever has been calculated so far (in [member priority] order), ignoring any lower priority areas.
		</constant>
		<constant name="SPACE_OVERRIDE_REPLACE" value="3" enum="SpaceOverride">
			This area replaces any gravity/damping, even the defaults, ignoring any lower priority areas.
		</constant>
		<constant name="SPACE_OVERRIDE_REPLACE_COMBINE" value="4" enum="SpaceOverride">
			This area replaces any gravity/damping calculated so far (in [member priority] order), but keeps calculating the rest of the areas.
		</constant>
	</constants>
</class>