This applies our existing style guide, and adds a new rule to that style
guide for modular components such as platform ports and modules:
Includes from the platform port or module ("local" includes) should be listed
first in their own block using relative paths, before Godot's "core" includes
which use "absolute" (project folder relative) paths, and finally thirdparty
includes.
Includes in `#ifdef`s come after their relevant section, i.e. the overall
structure is:
- Local includes
* Conditional local includes
- Core includes
* Conditional core includes
- Thirdparty includes
* Conditional thirdparty includes
As many open source projects have started doing it, we're removing the
current year from the copyright notice, so that we don't need to bump
it every year.
It seems like only the first year of publication is technically
relevant for copyright notices, and even that seems to be something
that many companies stopped listing altogether (in a version controlled
codebase, the commits are a much better source of date of publication
than a hardcoded copyright statement).
We also now list Godot Engine contributors first as we're collectively
the current maintainers of the project, and we clarify that the
"exclusive" copyright of the co-founders covers the timespan before
opensourcing (their further contributions are included as part of Godot
Engine contributors).
Also fixed "cf." Frenchism - it's meant as "refer to / see".
This change aims to reduce the number of places that need to be changed
when adding or editing a Godot type to the bindings.
Since the addition of `Variant.From<T>/As<T>` and
`VariantUtils.CreateFrom<T>/ConvertTo<T>`, we can now replace a lot of
the previous code in the bindings generator and the source generators
that specify these conversions for each type manually.
The only exceptions are the generic Godot collections (`Array<T>` and
`Dictionary<TKey, TValue>`) which still use the old version, as that
one cannot be matched by our new conversion methods (limitation in the
language with generics, forcing us to use delegate pointers).
The cleanup applies to:
- Bindings generator:
- `TypeInterface.cs_variant_to_managed`
- `TypeInterface.cs_managed_to_variant`
- Source generators:
- `MarshalUtils.AppendNativeVariantToManagedExpr`
- `MarshalUtils.AppendManagedToNativeVariantExpr`
- `MarshalUtils.AppendVariantToManagedExpr`
- `MarshalUtils.AppendManagedToVariantExpr`
When the C# bindings generator finds a type without meta assume the type
refers to the 64-bit version of the type:
- `float` is converted to `double`
- `int` is converted to `long`
Previously, we added source generators for invoking/accessing methods,
properties and fields in scripts. This freed us from the overhead of
reflection. However, the generated code still used our dynamic
marshaling functions, which do runtime type checking and box value
types.
This commit changes the bindings and source generators to include
'static' marshaling. Based on the types known at compile time, now
we generate the appropriate marshaling call for each type.
The main focus here was to remove the majority of code that relied on
Mono's embedding APIs, specially the reflection APIs. The embedding
APIs we still use are the bare minimum we need for things to work.
A lot of code was moved to C#. We no longer deal with any managed
objects (`MonoObject*`, and such) in native code, and all marshaling
is done in C#.
The reason for restructuring the code and move away from embedding APIs
is that once we move to .NET Core, we will be limited by the much more
minimal .NET hosting.
PERFORMANCE REGRESSIONS
-----------------------
Some parts of the code were written with little to no concern about
performance. This includes code that calls into script methods and
accesses script fields, properties and events.
The reason for this is that all of that will be moved to source
generators, so any work prior to that would be a waste of time.
DISABLED FEATURES
-----------------
Some code was removed as it no longer makes sense (or won't make sense
in the future).
Other parts were commented out with `#if 0`s and TODO warnings because
it doesn't make much sense to work on them yet as those parts will
change heavily when we switch to .NET Core but also when we start
introducing source generators.
As such, the following features were disabled temporarily:
- Assembly-reloading (will be done with ALCs in .NET Core).
- Properties/fields exports and script method listing (will be
handled by source generators in the future).
- Exception logging in the editor and stack info for errors.
- Exporting games.
- Building of C# projects. We no longer copy the Godot API assemblies
to the project directory, so MSBuild won't be able to find them. The
idea is to turn them into NuGet packages in the future, which could
also be obtained from local NuGet sources during development.
We will be progressively moving most code to C#.
The plan is to only use Mono's embedding APIs to set things at launch.
This will make it much easier to later support CoreCLR too which
doesn't have rich embedding APIs.
Additionally the code in C# is more maintainable and makes it easier
to implement new features, e.g.: runtime codegen which we could use to
avoid using reflection for marshaling everytime a field, property or
method is accessed.
SOME NOTES ON INTEROP
We make the same assumptions as GDNative about the size of the Godot
structures we use. We take it a bit further by also assuming the layout
of fields in some cases, which is riskier but let's us squeeze out some
performance by avoiding unnecessary managed to native calls.
Code that deals with native structs is less safe than before as there's
no RAII and copy constructors in C#. It's like using the GDNative C API
directly. One has to take special care to free values they own.
Perhaps we could use roslyn analyzers to check this, but I don't know
any that uses attributes to determine what's owned or borrowed.
As to why we maily use pointers for native structs instead of ref/out:
- AFAIK (and confirmed with a benchmark) ref/out are pinned
during P/Invoke calls and that has a cost.
- Native struct fields can't be ref/out in the first place.
- A `using` local can't be passed as ref/out, only `in`. Calling a
method or property on an `in` value makes a silent copy, so we want
to avoid `in`.
REGARDING THE BUILD SYSTEM
There's no longer a `mono_glue=yes/no` SCons options. We no longer
need to build with `mono_glue=no`, generate the glue and then build
again with `mono_glue=yes`. We build only once and generate the glue
(which is in C# now).
However, SCons no longer builds the C# projects for us. Instead one
must run `build_assemblies.py`, e.g.:
```sh
%godot_src_root%/modules/mono/build_scripts/build_assemblies.py \
--godot-output-dir=%godot_src_root%/bin \
--godot-target=release_debug`
```
We could turn this into a custom build target, but I don't know how
to do that with SCons (it's possible with Meson).
OTHER NOTES
Most of the moved code doesn't follow the C# naming convention and
still has the word Mono in the names despite no longer dealing with
Mono's embedding APIs. This is just temporary while transitioning,
to make it easier to understand what was moved where.
Implement built-in classes Vector4, Vector4i and Projection.
* Two versions of Vector4 (float and integer).
* A Projection class, which is a 4x4 matrix specialized in projection types.
These types have been requested for a long time, but given they were very corner case they were not added before.
Because in Godot 4, reimplementing parts of the rendering engine is now possible, access to these types (heavily used by the rendering code) becomes a necessity.
**Q**: Why Projection and not Matrix4?
**A**: Godot does not use Matrix2, Matrix3, Matrix4x3, etc. naming convention because, within the engine, these types always have a *purpose*. As such, Godot names them: Transform2D, Transform3D or Basis. In this case, this 4x4 matrix is _always_ used as a _Projection_, hence the naming.
Adds support for generating C# bindings that use the generic `Array<T>`
type instead of the non-generic `Array` type when the registered ClassDB
method specifies the array element type.
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
Adds a new, cleaned up, HashMap implementation.
* Uses Robin Hood Hashing (https://en.wikipedia.org/wiki/Hash_table#Robin_Hood_hashing).
* Keeps elements in a double linked list for simpler, ordered, iteration.
* Allows keeping iterators for later use in removal (Unlike Map<>, it does not do much
for performance vs keeping the key, but helps replace old code).
* Uses a more modern C++ iterator API, deprecates the old one.
* Supports custom allocator (in case there is a wish to use a paged one).
This class aims to unify all the associative template usage and replace it by this one:
* Map<> (whereas key order does not matter, which is 99% of cases)
* HashMap<>
* OrderedHashMap<>
* OAHashMap<>
The specific `_append_xml_*` methods implement the logic that generates
the proper XML documentation for the given BBCode tag and target and
appends it to the output.
We prefer to prevent using chained assignment (`T a = b = c = T();`) as this
can lead to confusing code and subtle bugs.
According to https://en.wikipedia.org/wiki/Assignment_operator_(C%2B%2B), C++
allows any arbitrary return type, so this is standard compliant.
This could be re-assessed if/when we have an actual need for a behavior more
akin to that of the C++ STL, for now this PR simply changes a handful of
cases which were inconsistent with the rest of the codebase (`void` return
type was already the most common case prior to this commit).
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
Now that the unused DocDump was removed, the `editor/doc` subfolder is
redundant.
Similarly, there's no reason for Collada to have a subfolder for itself
when glTF or OBJ don't.
Implementation for new Variant types Callable, Signal, StringName.
Added support for PackedInt64Array and PackedFloat64Array.
Add generation of signal members as events, as well as support for
user created signals as events.
NOTE: As of now, raising such events will not emit the signal. As such,
one must use `EmitSignal` instead of raising the event directly.
Removed old ThreadLocal fallback class. It's safe to use thread_local now since
it's supported on all minimum versions of compilers we support.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Previously we had a placeholder solution called 'Managed' to benefit from
tooling while editing the a part of the C# API.
Later the bindings generator would create the final 'GodotSharp' solution
including these C# files as well as the auto-generated C# API.
Now we replaced the 'Managed' solution with the final 'GodotSharp' solution
which is no longer auto-generated, and the bindings generator only takes
care of the auto-generated C# API.
This has the following benefits:
- It's less confusing as there will no longer be two versions of the same file
(the original and a generated copy of it). Now there's only one.
- We no longer need placeholder for auto-generated API classes, like Node or
Resource. We used them for benefiting from tooling. Now we can just use the
auto-generated API itself.
- Simplifies the build system and bindings generator. Removed lot of code
that is not needed anymore.
Also added a post-build target to the GodotTools project to copy the output to
the data dir. This makes it easy to iterate when doing changes to GodotTools,
as SCons doesn't have to be executed anymore just to copy these new files.
The Mono IL interpreter's WebAssembly to native trampolines don't support passing structs by value, so we need to do it this way.
Also now we pass and return long, ulong, float and double as ref parameters as well. This is due to missing trampolines for float and long types. This is likely a temporary workaround that will be reverted in the future. The correct solution would be to patch 'mono/mini/m2n-gen.cs' when building the Mono runtime for WASM in order to generate the trampolines we need.
API hashes cannot be calculated on release builds, as bindings information is lacking. Therefore, we should not be comparing it with the generated glue hash as they will never match.
Make the build system automatically build the C# Api assemblies to be shipped with the editor.
Make the editor, editor player and debug export templates use Api assemblies built with debug symbols.
Always run MSBuild to build the editor tools and Api assemblies when building Godot.
Several bugs fixed related to assembly hot reloading and restoring state.
Fix StringExtensions internal calls not being registered correctly, resulting in MissingMethodException.
- Methods that act as accessors for properties in the same class (like `GetPosition` and `SetPosition` are for `Position`) are now marked as obsolete. They will be made private in the future.
