This is already allowed when using cinematic preview, but not
when previewing a Camera3D the usual way.
Many operations from the View menu still work while previewing
a camera, such as switching between debug draw modes and toggling
information panes.
- Locking nodes can now be done by pressing Ctrl + L, and unlocking with
Ctrl + Shift + L.
- Grouping nodes is now done by pressing Ctrl + G, and ungrouping with
Ctrl + Shift + G (similar to Inkscape).
- Toggling the grid is now done by pressing the `#` key
(also similar to Inkscape). This change was needed as Ctrl + G
now groups selected nodes.
Different shortcuts are used for the lock/unlock and group/ungroup
actions, so that the shortcuts are idempotent.
* Removed entirely from RenderingServer.
* Replaced by ImmediateMesh resource.
* ImmediateMesh replaces ImmediateGeometry, but could use more optimization in the future.
* Sprite3D and AnimatedSprite3D work again, ported from Godot 3.x (though a lot of work was needed to adapt them to Godot 4).
* RootMotionView works again.
* Polygon3D editor works again.
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
1. When having 2 nodes selected, deselecting one in the ScemeTreeDock would keep the inspector in MultiNodeEdit rather than editing the one remaining node directly. This is now fixed. Closes#49451
2. In the Node3D editor, Shift-Selecting a region (drag selecting) would *deselect* nodes which were already selected, and select ones which were not, essentially inverting the selection. This is now fixed - shift-drag-selecting will only add nodes to the selection. To deselect, individual nodes can be clicked on. I am not sure if there is an issue open for this - it was a bug I found while testing other changes.
3. Other minor code cleanup.
* Renames for 2D and 3D
* Class name was confusing, given both 2D and 3D have a "visible" property that is unrelated to actual on-screen visibility.
* New name makes it clear that this is about visibility on screen.
Updates rich_text_label so that the built-in documentation can be searched
Previously, it would only find the first result and would not select other results
Renames "_entered" functions to "_submitted"
Apparently this feature utilized a completely commented out 7+ years old
method, effectively doing nothing. Since it was designed with a completely
different editor design in mind it is pretty much incompatible and as such
it's best to remove it for now.
Previously, the wrong tooltip was shown.
This also tweaks the tooltips' texts to be clearer and remove
references to "game" (since Godot is used for more than just games).
This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
The editor only needs to redraw when the camera is moving.
This helps preserver battery life on laptops when using freelook,
especially with the toggle mode (Shift + F).
This also acts as a general-purpose "deselect" shortcut since pressing
it a second time will deselect text.
This is available both in the script editor and in TextEdit fields
in use, both in the editor and projects.
The Duplicate Line script editor shortcut was moved to Ctrl + Shift + D
since it conflicts with the new shortcut (Ctrl + D). The rationale for
doing so is that Duplicate Line is a less commonly used action, and
its behavior can be replicated by copying and pasting the current line
anyway. (With no selection active, the whole line will be copied.)
- Move most properties from TileMap to TileSet,
- Make TileSet more flexible, supporting more feature (several
collision layers, etc...),
- Fusion both the TileMap and TileSet editor,
- Implement TileSetSources, and thus a new way to index tiles in the TileSet,
- Rework the TileSet and TileMap editors completely,
- Implement an editor zoom widget (and use it in several places)
This makes it possible for external editors to pick up the changes.
Most modern editors should reload the file automatically,
but some older/lightweight editors may ask the user instead
(or only warn after trying to save in the external editor).
This closes#41283.
- Make the timeline indicator thicker and with an indicator triangle,
similar to the animation editor timeline.
- Add Space bar shortcut to play/pause the audio preview.
- Only seek when clicking or dragging with the left mouse button,
not other mouse buttons.
It existed in early Godot releases to allow working around hardware limitations
on max texture sizes (e.g. hardware limits of 1024x1024 pixels).
Nowadays the max texture size supported natively by Godot is 16384x16384, and
even low end mobile hardware should support at least 4096x4096.
The LargeTexture implementation is basically just an array with offsets, sizes
and textures and should be easy to replicate with a custom Texture resource if
needed - solving most of its bugs on the way as the implementation removed here
has various unimplemented or incomplete methods.
The editor theme now makes use of rounded corners and less borders
to follow modern visual trends.
The default theme's colors were also tweaked to make the blue hue
more subtle (similar to the Arc theme, which was removed as a
consequence). The Alien theme was replaced by a Breeze Dark theme,
which should blend in well with the KDE theme.
Aaron Franke
Rémi Verschelde
reduz
Hugo Locurcio
Rémi Verschelde
Gilles Roudière
Yuri Roubinsky
kobewi
Lightning_A
Yuri Sizov
Paulb23
Eric M
Marcel Admiraal
Gregory Basile
Haoyu Qiu
Riteo Siuga
Bastiaan Olij
Pedro J. Estébanez
TwistedTwigleg
fox
kleonc
nobuyuki_nyuu
jfons
Georgi Genkov
trollodel
sent44
llschuster
Michael Alexsander