Remove duplicate bezier code and use Curve instead.
Add an overridable method for retrieving the points of a connection line, which
makes it posible to create custom connections lines.
* Extensions are now scanned and loaded on demand.
* Extensions found are cached into a file that is used to load them (which is also exported).
* Editor will ask to restart when an extension requires core functionality.
* Editor will attempt to load extensions always before importing or loading scenes. This ensures extensions can register the relevant types.
OmniLight3D:
* Fixed lack of precision in cube map mode by scaling the projection's
znear.
* Fixed aliasing issues by making the paraboloids use two square regions instead of two half
squares.
* Fixed shadowmap atlas bleeding by adding padding.
* Fixed sihadow blur's inconsistent radius and unclamped sampling.
SpotLight3D:
* Fixed lack of precision by scaling the projection's znear.
* Fixed normal biasing.
Both:
* Tweaked biasing to make sure it works out of the box in most situations.
Like the spawn/despawn feature, it can be completely overridden with 2
custom callables.
The callables will be called with the list of tracked objects.
In SERVER mode, objects are automatically tracked, while in CUSTOM mode
you can manually track them via `track`/`untrack` (but that's optional).
The default sync only happens from server to client, with batch updates,
over unreliable channel (but with custom ordering).
The default sync will warn you, if your state representation gets too
big.
Move the former "spawnables" functions to a dedicated
MultiplayerReplicator class.
Support custom overrides in replicator.
Spawn/despawn messages can now contain a state.
The state can be automatically encoded/decoded by passing the desired
object properties to `spawnable_config`.
You can use script properties to optimize the state representation.
2 Callables can be also specified to completely override the default
implementation for sending and receiving the spawn/despawn event.
(9 bytes overhead, and there's room for improvement here).
When using a custom implementation `spawn` and `despawn` can be called
with any Object, `send_spawn`/`send_despawn` can receive any Variant as
a state, and the path is not required.
Two new functions, `spawn` and `despawn`, convey the implementation
independent method for requesting a spawn/despawn of an Object, while
`send_spawn` and `send_despawn` represent the more low-level send event
for a Variant to be used by the custom implementations.
Fixes undefined behavior, and fixes the logic for negative powers of ten.
Fixes#51764.
Adds tests to validate the changes and prevent regressions.
Adds docs for `String.num`.
* Make sure shaders are named, to aid in debug in case of failure
* SceneRenderRD was being wrongly initialized (virtual functions being called when derivative class not initialized).
* Fixed some bugs resulting on the above being corrected.
* Make Undo/Redo menu items disabled when clicking it does nothing.
* Context menu of `TextEdit`
* Context menu of `LineEdit`
* Editor's Scene menu
* Script editor's Edit menu and context menu (for Script and Text)
* Make editor undo/redo log messages translatable.
* Mark `UndoRedo`'s `has_{un,re}do()` methods as `const`.
* Expose `TextEdit`'s `has_{un,re}do()` to scripts since `{un,re}do()` are already available.
This is done by providing API access to app specific directories which don't have any limitations and allows us to bump the target sdk version to 30.
In addition, we're also bumping the min sdk version to 19 as version 18 is no longer supported by Google Play Services and only account of 0.3% of Android devices.
Changes:
- Rename few methods/property and group them in the editor when it's possible
- Make MotionResult API consistency with KinematicCollision
- Return a boolean in move_and_slide if there was a collision
- New methods:
- get_floor_angle on CharacterBody to get the floor angle.
- get_angle on KinematicCollision to get the collision angle.
- get_last_slide_collision to quickly get the latest collision of move_and_slide.
This PR and commit adds a new IK system for 3D with the Skeleton3D node
that adds several new IK solvers, as well as additional changes and functionality
for making bone manipulation in Godot easier.
This work was sponsored by GSoC 2020 and TwistedTwigleg
Full list of changes:
* Adds a SkeletonModification3D resource
* This resource is the base where all IK code is written and executed
* Adds a SkeletonModificationStack3D resource
* This node oversees the execution of the modifications and acts as a bridge of sorts for the modifications to the Skeleton3D node
* Adds SkeletonModification3D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in it's own file
* Several changes to Skeletons, listed below:
* Added local_pose_override, which acts just like global_pose_override but keeps bone-child relationships intract
* So if you move a bone using local_pose_override, all of the bones that are children will also be moved. This is different than global_pose_override, which only affects the individual bone
* Internally bones keep track of their children. This removes the need of a processing list, makes it possible to update just a few select bones at a time, and makes it easier to traverse down the bone chain
* Additional functions added for converting from world transform to global poses, global poses to local poses, and all the same changes but backwards (local to global, global to world). This makes it much easier to work with bone transforms without needing to think too much about how to convert them.
* New signal added, bone_pose_changed, that can be used to tell if a specific bone changed its transform. Needed for BoneAttachment3D
* Added functions for getting the forward position of a bone
* BoneAttachment3D node refactored heavily
* BoneAttachment3D node is now completely standalone in its functionality.
* This makes the code easier and less interconnected, as well as allowing them to function properly without being direct children of Skeleton3D nodes
* BoneAttachment3D now can be set either using the index or the bone name.
* BoneAttachment3D nodes can now set the bone transform instead of just following it. This is disabled by default for compatibility
* BoneAttachment3D now shows a warning when not configured correctly
* Added rotate_to_align function in Basis
* Added class reference documentation for all changes
If enabled, key/touch/joystick events will be flushed just before every idle and physics frame.
Enabling this can greatly improve the responsiveness to input, specially in devices that need to run multiple physics frames per each idle frame, because of not being powerful enough to run at the target frame rate.
This will only work for platforms using input buffering (regardless event accumulation). Currenly, only Android does so, but could be implemented for iOS in an upcoming PR.
- Back to 1-based layer names to make it clearer in editor UI
- Layer bit accessors are renamed to layer value and 1-based too
- Uniform errors and documentation in render and physics
- Fix a few remaining collision_layer used in place of collision_mask
The project setting wasn't being used anywhere.
This also tweaks the property hints to denote that these properties
are only effective after a restart.
* Only apply final actions to attachments used in the last pass.
* Fixes to draw list final action (was using continue instead of read/drop).
* Profiling regions inside draw lists now properly throw errors.
* Ability to enable gpu profile printing from project settings. (used to debug).
This makes it clearer that this property is only about physics FPS,
not rendering FPS.
The `physics_fps` project setting was also renamed to
`physics_ticks_per_second` for consistency.
This PR and commit adds the functionality to arrange nodes in VisualScript/VisualShader editor. The layout generated by this
feature is compact, with minimum crossings between connections
& uniform horizontal & vertical gaps between the nodes.
This work has been sponsored by GSoC '21.
Full list of additions/changes:
• Added arrange_nodes() method in GraphEdit module.
• This method computes new positions for all the selected
nodes by forming blocks and compressing them.
The nodes are moved to these new positions.
• Adding this method to GraphEdit makes it available for
use in VisualScript/VisualShaders editors and its other
subclasses.
• Button with an icon has been added to call arrange_nodes() in GraphEdit.
• This button is inherited by VisualScript/VisualShaders editors
to invoke the method.
• Undo/redo is functional with this method.
• By using signals in arrange_nodes(), position changes are registered
in undo/redo stack of the subclass that is using the method.
• Metadata of the method has been updated in ClassDB
• Method description has been added to class reference of GraphEdit
Infinite inertia:
Not needed anymore, since it's now possible to set one-directional
collision layers in order for characters to ignore rigid bodies, while
rigid bodies still collide with characters.
Ray shapes:
They were introduced as a work around to allow constant speed on slopes,
which is now possible with the new property in CharacterBody instead.
Same thing that was already done in 2D, applies moving platform motion
by using a call to move_and_collide that excludes the platform itself,
instead of making it part of the body motion.
Helps with handling walls and slopes correctly when the character walks
on the moving platform.
Also made some minor adjustments to the 2D version and documentation.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
When synchronizing CharacterBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
`PackedScene`s can be configured to be spawnable via a new
`MultiplayerAPI.spawnable_config` method.
They can be configured either to be spawned automatically when coming
from the server or to always require verification.
Another method, `MultiplayerAPI.send_spawn` lets you request a spawn on
the remote peers.
When a peer receive a spawn request:
- If it comes from the server and the scene is configured as
`SPAWN_MODE_SERVER`:
- Spawn the scene (instantiate it, add it to tree).
- Emit signal `network_spawn`.
- Else:
- Emit signal `network_spawn_request`.
In a similar way, `despawn`s are handled automatically in
`SPAWN_MODE_SERVER`.
In `SPAWN_MODE_SERVER`, when a new client connects it will also receive,
from the server all the spawned (and not yet despawned) instances.
Change incorrect `[/code]` closing tags to `[/url]` tags.
The `url` tags for the links to the Unicode code points information use `[/code]` rather than `[/url]` to close them.
This results in the links being rendered incorrectly in the IDE--the entire rest of the documentation for each method gets turned into a giant underlined link.
This issue was introduced in a2271ba3bd.
- Fix library loading and initialization.
- Add extra methods/parameters in the interface needed by extenstions.
- Add Variant destructors and functions for extracting values and
creating Variants from values.
Having a property which has the same name as its class leads to confusing
situations (e.g. `BaseButton` has a `shortcut` property of type `Shortcut`
which has a `shortcut` property of type `InputEvent`).
Also renames `is_event` to `matches_event`, and `is_valid` to `has_valid_event`
to better reflect what the methods check.
Adds a few more complex edge cases which are supported.
Also adds some documentation, simplifies the code a bit and forbids using
double quotes as a delimiter.
- Now able to display up to 32 layers in physics (still 20 for render)
- Adjustable grid size to fit available space in dock
- Expansion icon to display more layers vertically
- Layer numbers in cells to help with selection
Hugo Locurcio
Jummit
Hendrik Brucker
requizm
reduz
fabriceci
jfons
Aaron Franke
Rémi Verschelde
Paulb23
Fabio Alessandrelli
Rémi Verschelde
Mohammad Khashashneh
Max Hilbrunner
Haoyu Qiu
kobewi
ne0fhyk
Kevin Fischer
Yuri Roubinsky
TwistedTwigleg
Yuri Sizov
Pedro J. Estébanez
bruvzg
PouleyKetchoupp
Iced Quinn
K. S. Ernest (iFire) Lee
Umang Kalra
Bhuvan Vemula
Angad Kambli
follower
Michael Alexsander
George Marques
Bastiaan Olij
Kevin Sanders
Gilles Roudière