The 204 and 205 are the older, SDL 2.0.4 and 2.0.5 compatible mappings,
but since all new mappings have only been added to the main
gamecontrollerdb.txt which overrides the older entries, it doesn't make
much sense for us to keep the old databases.
We do not support the SDL2 half axes and inverted axes features from
gamecontrollerdb.txt, but this only impacts the specific controllers
which can use those features, the rest are parsed and used properly.
As for godotcontrollerdb.txt, it doesn't make sense for us to maintain
our own custom mappings instead of submitting them upstream. The only
exception is the Javascript and UWP platforms for which no bindings are
available upstream, so we keep those entries.
(cherry picked from commit 510e83498e)
This adds 2 new values (items and draw calls) to the performance monitor in a '2d' section, rather than reusing the 3d values in the 'raster' section.
This makes it far easier to optimize games to minimize drawcalls.
This is needed as C# may free resources from the finalizer thread during
CSharpLanguage::finish(). Previously this would result in RIDs not being freed.
This option is meant to use together with `--path` or from a project
folder. Otherwise the project manager is opened and the option triggers
a crash.
Fixes#25589.
The previous behavior relying on the provided extension was problematic
on macOS since .zip is the main extension used for the full project
export (binary + data pack).
We add a dedicated `--export-pack` command line option to define when
only the data pack should be exported. Its extension will still be
inferred from the path.
Fixes#23073.
We were overriding values from `gamecontrollerdb.txt` (current, updated
upstream) with `gamecontrollerdb_205.txt` (legacy, SDL 2.0.5) and then
`gamecontrollerdb_204.txt` (legacy, SDL 2.0.4).
There was a comment to warn about this but it seems it did not prevent
using the wrong order for all this time...
Now `gamecontrollerdb.txt` mappings will properly override outdated
ones present in the `204` and `205` variants.
I'm barely scratching the surface of the changes needed to make the
--export command line interface easy to use, but this should already
improve things somewhat.
- Streamline `can_export()` templates check in all platforms, checking
first for the presence of official templates, then of any defined
custom template, and reporting on the absence of any.
Shouldn't change the actual return value much which is still true if
either release or debug is usable - we might want to change that
eventually and better validate against the requested target.
- Fix discrepancy between platforms using `custom_package/debug` and
`custom_template/debug` (resp. `release`).
All now use `custom_template`, which will break compatibility for
`export_presets.cfg` with earlier projects (but is easy to fix).
- Use `can_export()` when attempting a command line export and report
the same errors that would be shown in the editor.
- Improve error reporting after a failed export attempt, handling
missing template and invalid path more gracefully.
- Cleanup of unused stuff in EditorNode around the export workflow.
- Improve --export documentation in --help a bit.
Fixes#16949 (at least many of the misunderstandings listed there).
Fixes#18470.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
It was previously mentioning only one of the two required arguments.
This also mentions that the export path is relative to the project
directory.
This partially addresses #28646.
New contributors added to AUTHORS:
@allkhor, @Eoin-ONeill-Yokai, @timothyqiu, @madmiraal, @zaksnet
Update sponsors on splash screen.
Thanks to all contributors and donors for making Godot possible!
On iOS devices without a physical home button iOS
shows a home indicator instead. This is often in the
way of the UI or the game.
Added a project setting to disable hidden home indicator.
The default value is to hide the home indicator
This change allows error messages to be printed in the editor debugger when the game fails on load, instead of displaying them in the console terminal only.
Implemented uniform API in Viewport class to override 2D and/or
3D camera.
Added buttons in 2D and 3D editor viewport toolbars that override
the running game camera transform with the editor viewport camera
transform. Implemented via remote debugger protocol and camera
override API.
Removed LiveEditFuncs function pointers from ScriptDebugger class.
Since the debugger got access to the SceneTree instance (if one
exists), there is no need to store the function pointers. The live
edit functions in SceneTree are used directly instead. Also removed
the static version of live edit functions in SceneTree for the same
reason. This reduced the SceneTree -> Debugger coupling too since
the function pointers don't need to be set from SceneTree anymore.
Moved script_debugger_remote.h/cpp from 'core/' to 'scene/debugger/'.
This is because the remote debugger is now using SceneTree directly
and 'core/' classes should not depend on 'scene/' classes.
New contributors added to AUTHORS:
@creikey, @IronicallySerious, @LikeLakers2, @minraws, @NilsIrl,
@profan, @raphael10241024
New Platinum sponsor, added to splash screen:
Heroic Labs
Merged some duplicates via .mailmap to allow better tracking of
commit counts with `git shortlog -s -n -e --no-merges`.
Thanks to all contributors and donors for making Godot possible!
connect_to_stream now accepts optional parameter to specify which
certificates to trust.
Implement accept_stream (SSL server) with key/cert parameters to specify
the RSA key and X509 certificate resources.
This reproduces the behavior used for printing when using the remote
debugger. The default limit is 100 errors and 100 warnings per second,
which makes it possible to display much more GDScript warnings
before overflowing.
This also adds a "Too many warnings" message, so that warnings
don't look like errors when overflowing anymore.
This closes#21896.
Also added support for SCons project-absolute paths (starting with #) and
warning about duplicates in add_source_files(), and fixed
default_controller_mappings.gen.cpp being included twice after first build
due to *.cpp globbing.
Part of #30270.
Addresses #30068
This is a prerequisite for allowing proper support for fixed timestep interpolation, exposing the interpolation fraction to the engine, modules and gdscript.
The interpolation fraction is the fraction through the current physics tick at the time of the current frame.
This is an editor setting and its value can also be toggled
using an entry in the Editor toolbar. The console will still
appear briefly when starting the project manager or editor,
as it's still compiled as console application.
Does not impact exported games, which will still run without
console in release and with console in debug mode.
A project setting or export option could be added to disable
it in debug mode if there's demand for it, but that would
greatly reduce the usefulness of debug builds if Windows users
can no longer report error and crash messages.
Fixes#17889.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
This can help to solve compilation issues on systems with Japanese
locale with encodings like Shift_JIS and UTF-8-BOM.
Also be more consistent using String::utf8() to represent cyrilic
unicode characters in test_string.cpp
Clarified some comments in test_string.cpp for some Unicode characters.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
Due to the high number of commits in the Godot repository,
7-character hashes were starting to become occasionally ambiguous.
In contrast, 9-character hashes are currently unambiguous for
all commits.
Also include website URL and make it configurable via version.py
together with the rest of the engine branding.
Add mention to MIT license in --help output.
On high-refresh rate displays, the old default value (8000) effectively
limited redrawing to 125 FPS, no matter whether V-Sync was enabled
or not. The new value limits redrawing to a value slightly above
144 FPS, decreasing input lag and making the editor feel smoother
when using freelook.
60 Hz displays aren't affected by this change when V-Sync is enabled,
since V-Sync will take care of limiting redrawing to 60 FPS.
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
Adds `FALLTHROUGH` macro to specify when a fallthrough is intentional.
Can be replaced by `[[fallthrough]]` if/when we switch to C++17.
The warning is now enabled by default for GCC on `extra` warnings level
(part of GCC's `-Wextra`). It's not enabled in Clang's `-Wextra` yet,
but we could enable it manually once we switch to C++11. There's no
equivalent feature in MSVC for now.
Fixes#26135.
The binary search algorithm used to lookup character codes in the table
relies that the data must be ordered. This fixes `to_lower()` string
method to convert upper case to lower case properly, so that the
algorithm doesn't terminate prematurely.
Co-authored-by: AndreevAndrei (avandrei) <avandrei@MacBookAAV.local>
Acknowledge mouse button events as position tellers (to make picking more solid; for instance, the touch mouse is raised with a mouse unpressed event that may have a more current position)
Forget mouse position for physics if touch mouse raised (because the position known as last is no longer meaningful)
Remove needless check for mouse over/exit (now there's code to inject an spurious move for cases where camera/objects have moved)
Restrict 2D mouse over/exit to mouse events (including emulated from touch; true touches shouldn't trigger the signals)
Fixes#26460.
GLES2 is not designed to be a drop-in replacement for the GLES3 backend,
so the fallback mode has to be used knowingly. It *can* make sense for
simple projects which make sure to handle the differences between both
rendering backends, but most users should stick to one supported backend.
By making it opt-in, we can now use this parameter to define whether to
export ETC textures to Android and iOS when using GLES3 + Fallback.
When using GLES3 without Fallback on Android, set the proper min GLES
version in the AndroidManifest.
Also made the option boolean and renamed it for clarity and to avoid
conflict with the previous String option (which would always evaluate as
"true" otherwise).
Fixes#26569.
They had been reserved for future implementation, but we now have the
`match` CF keyword which does the same and more.
According to @reduz `do` was even added by mistake when copying from
the shader language parser, it was never intended to add support for
`do`... `while` loops, as the syntax would be awkward in GDScript,
and the added sugar is not worth it.
Fixes#25787.
Rémi Verschelde
punto-
Hugo Locurcio
lawnjelly
bruvzg
Ignacio Etcheverry
George Marques
Haoyu Qiu
Jonas Bernemann
TerminalJack
PouleyKetchoupp
Pawel Lampe
Marcel Admiraal
Rafał Mikrut
Erik
Michael Alexsander
Shiqing
Andrii Doroshenko (Xrayez)
iwek7
Robin Hübner
Fabio Alessandrelli
volzhs
Emmanuel Barroga
IAmActuallyCthulhu
Guilherme Felipe
Tomasz Chabora
Chaosus
Bojidar Marinov
Nils ANDRÉ-CHANG
Luka Dornhecker
Ryan Stein
lupoDharkael
Daw11
Pedro J. Estébanez
Anish Bhobe
Juan Linietsky
Juan Linietsky
Andrettin
marxin
Hein-Pieter van Braam