This was changed in #56943 to allow adding new importers from plugins that
take precedence over built-in ones, but this should be opt-in, not the default
behavior.
Fixes#57730.
Allows detecting when a new version of the progressive web app service
worker is waiting (i.e. an update is pending), along a function to force
the update and reload all clients.
- Enable Read Sky Light to get proper outdoors lighting out of the box.
- Set bounce feedback to 0.5 by default to get a better quality result.
- Higher values may cause infinite feedback with bright surfaces.
- Increase the number of frames to converge to improve quality
at the cost of latency. Most scenes are fairly static after all.
- Use 75% Y scale by default as most scenes are not highly vertical.
- Reorder the Y scale enum to go from the lowest Y scale to the highest.
Also rename the "Disabled" setting to "100%" for clarity.
This improves rendering performance noticeably, especially when the
camera moves fast.
On a medium-sized test scene on a GTX 1080 in 2560×1440, going
from 6 to cascades saves 0.5 ms of frame time while looking visually
identical (as most of the scene fits within the 4 cascades).
* Vector2i and Vector3i mul/div by a float results in Vector2 and Vector3 respectively.
* Create specializations to allow proper bindings.
This fixes#44408 and supersedes #44441 and keeps the same rule of int <op> float returnig float, like with scalars.
Now uses two interfaces so it can be overridden in the future, and
core no longer depends on Node.
The interfaces are implements in scene/multiplayer.
Replaces root_node with root_path.
Remove all Node references from MultiplayerAPI.
Initial implementation of the MultiplayerReplicationInterface and its
default implementation (SceneReplicationInterface).
New MultiplayerSpawner node helps dealing with instantiation of scenes
on remote peers (e.g. clients).
It supports both custom spawns via a `_spawn_custom` virtual function,
and optional auto-spawn of known scenes via a TypedArray<PackedScenes>
property.
New MultiplayerSynchornizer helps synchronizing states between the local
and remote peers, supports both sync and spawn properties and is
configured via a `SceneReplicationConfig` resource.
It can also sync via path (i.e. without being spawned by a
MultiplayerSpawner if both peers has it in tree, but will not send the
spawn state in that case, only the sync one.
This makes sure that assigning values to enum-typed variables are
consistent. Same enum is always valid, different enum is always
invalid (without casting) and assigning `int` creates a warning
if there is no casting.
There are new test cases to ensure this behavior doesn't break in
the future.
Add more detail to the description for the warp_mouse_position method, clarifying that the vector is in screen coordinates and relative to an origin at the top of the game window.
-Allows more fine grained notifications (hence better performance) than using the global scene tree signals (node added and removed).
-Required for #55950
This provides better usability when a GradientTexture or CurveTexture
is added to a Control node.
Visual appearance of most GradientTextures and CurveTextures will
be unaffected.
- Allow OptionButton selection to be set to -1 to signify no selection, both via API and in the editor.
- Reset OptionButton selection to -1 when the selected item has been removed.
- Fully convert PopupMenu to a zero-based ID system, which improves an inconsistency in generated IDs when making new items in the editor.
This commit adds a condition to VariantCaster that casts Variants of type OBJECT to any type T, if T is derived from Object.
This change enables a fair bit of code cleanup. First, the Variant implicit cast operators for Node and Control can be removed, which allows for some invalid includes to be removed. Second, helper methods in Tree whose sole purpose was to cast arguments to TreeItem * are no longer necessary.
A few small changes also had to be made to other files, due to the changes cascading down all the includes.
This fixes a conflict with the `pressed` signal.
The new name is temporary and only intended to solve the conflict for upcoming
alpha builds. Discussions are still ongoing regarding the BaseButton API and
how to rename and refactor more of its properties, signals and methods to have
a clearer API in 4.0.
The new default project theme uses StyleBoxFlat extensively for
a more modern design and better scalability to multiple resolutions.
SVG icons are now used in place of PNG icons. While this does not
allow for true vector-based icon drawing (icons are still rasterized
at load-time), this makes the design work easier for contributors
and opens the door to vector drawing in the future (e.g. with polygons
or SDFs).
Like for editor icons, the SVG header file is now built automatically
when a SVG file is changed. This removing the need for running
`make_header.py` manually (TODO).
The "Use Hidpi" project setting has been removed in favor of a
"Default Theme Scale" project setting, which allows creating the
default theme at a higher/lower scale than the default.
This can be used when designing GUIs with a high base resolution
to ensure crisp visuals.
Co-authored-by: Yuri Sizov <yuris@humnom.net>
Most of the custom logic to handle special keying cases is now inside
the AnimationPlayerEditorPlugin.
The EditorInspector now emits a signal when inspecting a new object.
[macOS] Fix transient windows not working in the full-screen mode.
[macOS] Fix moving transient windows to the other screen than parent window.
[macOS] Fix popup menu switch on hover.
[macOS] Use content origin rect for windows position (to ensure `DS.mouse_get_position` is equal to `DS.window_get_position` + mouse position from the input events).
[macOS] Fix incorrect input coordinates, when external display with different scaling in connected/disconnected.
[macOS/Windows] Fix moving fullscreen windows between the screens.
Add auto refocusing of the parent window, when the focused transient window is closed.
Remove redundant `DS.mouse_get_absolute_position` function (returns mouse position in the screen coordinates, same as `DS.mouse_get_position`).
The documentation for the sort method warns the user that it doesn't do natural sort but fails to provide a solution when it's just a one liner thanks to String.naturalnocasecmp_to() and lambda support
This suggests exactly the same algorithm as used by the filesystem dock for file sorting.
Co-authored-by: Hugo Locurcio <hugo.locurcio@hugo.pro>
This provides more flexibility between performance and quality
adjustments, especially when using SDFGI for small-scale levels
(which can be useful for procedurally generated scenes).
On the only platform where PVRTC is supported (iOS),
ETC2 generally supersedes PVRTC in every possible way. The increased
memory usage is not really a problem thanks to modern iOS' devices
processing power being higher than its Android counterparts.
- Uses all accumulated movements when calculating velocity
- Discards old accumulated movements
- Sets last mouse velocity to zero when there is no movement
Fix "Fill" alignment processing wrong side of the text if overrun trim was applied.
Improve "Fill" alignment to avoid adding excessive subsequent spaces or elongations.
Add font detection to the overrun, to correctly add ellipsis (was using last glyph font, which doesn't necessary have dot character).
Improve line breaking to avoid adding excessive subsequent soft break points for languages without word separator.
Port missing overrun/justification code to the Fallback text server.
Fix inferred text direction detection by controls.
Add tests for "Fill" alignment and line breaking glyph flags.
Primary and secondary handles are no longer differentiated by their ids, so a bool was added to tell them apart in all the handle-related methods.
Includes a minor fix in CollisionPolygon3DEditor, unrelated to editor gizmos.
Both AnimatedSprite2D and AnimatedSprite3D use a SpriteFrames resource, but the SpriteFrames
class description currently only lists being used with the 2D variant.
The same is done for `Vector` (and thus `Packed*Array`).
`begin` and `end` can now take any value and will be clamped to
`[-size(), size()]`. Negative values are a shorthand for indexing the array
from the last element upward.
`end` is given a default `INT_MAX` value (which will be clamped to `size()`)
so that the `end` parameter can be omitted to go from `begin` to the max size
of the array.
This makes `slice` works similarly to numpy's and JavaScript's.
