Some controllers (notably those made by 8bitdo) do not always emit an event to zero out a D-pad axis before flipping direction. For example, when rolling around aggressively the D-pad of an 8bitdo SN30 Pro/Pro+, the following may be observed:
```
ABS_HAT0X : -1
ABS_HAT0Y : -1
ABS_HAT0Y : 0
ABS_HAT0Y : 1
ABS_HAT0X : 1
```
Notable here is that no event for `ABS_HAT0X: 0` is emitted between the events for `ABS_HAT0X: -1` and `ABS_HAT0X: 1`. Consequently, the game engine believes that both the negative _and_ positive x-axis directions of the D-pad are activated simultaneously (i.e `is_joy_button_pressed()` returns `true` for both `JOY_BUTTON_DPAD_LEFT` and `JOY_BUTTON_DPAD_RIGHT`), which should be impossible.
This issue is _not_ reproducible on all controllers. The Xbox One controller in particular will not exhibit this problem (it always emits zeroing out events for an axis before flipping direction).
The fix is to always zero out the opposite direction on the D-pad axis in question when processing an event with a nonzero value. This unfortunately wastes a small number of CPU cycles on controllers that behave nicely.
**I have verified this issue is also reproducible in the stable 3.2 branch**
`debug_symbols=yes` will now behave like `debug_symbols=full` did
before. The difference in compressed file sizes is not that large,
which means there isn't much point in having two different values.
This helps make the buildsystem easier to understand.
Allows sending the clipboard content to the clipboard manager on exit to
keep the content when using a clipboard manager that doesn't
automatically makes a backup when copying.
MULTIPLE selection mechanism also had to be implemented, because in this
case, the clipboard manager might request multiple selection targets at
once.
Known use case: Ubuntu with XFCE4
On FocusOut events, the window could be destroyed while propagating
WINDOW_EVENT_FOCUS_OUT event, which causes the WindowData to be
invalidated, and still used for calls to XUnsetICFocus.
This change moves calls to XUnsetICFocus, and also XSetICFocus in
FocusIn events, before propagating the change of focus event to the
engine, to be safe in any case.
Also setting xic member to nullptr after all calls to XDestroyIC to keep
things clean and consistent.
Fixes#42645
When pasting clipboard content from Godot to other applications,
multiple SelectionRequest events are sent to Godot in order to access
the data. It could take a long time before the data is ready for the
other app because events were processed one by one on the main thread,
especially when Godot is unfocused and runs at low frequency.
With this change, SelectionRequest events are directly handled on the
separate event polling thread to minimize this delay.
This change also replaces clipboard_get() calls in SelectionRequest with
a direct access to internal_clipboard, since in this case we know Godot
is the owner of the clipboard content and it's not necessary to query
the x server for it.
This change makes keyboard inputs more responsive on Linux, especially
when the FPS is lower on slower configurations.
Polling events from the x server is done on a separate thread to avoid a
frame delay with inputs, due to first sending the event to the input
manager with XFilterEvent then processing the new event only on the next
frame.
Calls to Input Manager functions like XSetICFocus, XUnsetICFocus and
XSetICValues use a mutex, because they are polling events internally and
would otherwise interfere with our own thread process for polling events
which can cause a deadlock in some cases.
XUnsetICFocus is called instead of XSetICFocus on FocusOut events,
so the input manager can be properly notified of focus changes.
clipboard_get now uses a blocking call to poll for a specific event type
when waiting for a SelectionNotify event, instead of polling all events
and filtering them afterwards.
Add __NetBSD__ to `platform_config.h` so that it can find `alloca`
and use the proper `pthread_setname_np` format.
Rename RANDOM_MAX to avoid conflict with NetBSD stdlib.
Fixes#42145.
Proper implementation for get_window_at_screen_position:
Now getting the topmost last active window when overlapping.
Mouse drag & release events:
They are now propagated through the current focused window, in order to
make it consistent with the engine expectations and the Windows display
server implementation.
Now using override_redirect for menu & tooltip popups to prevent the WM from
interfering with them, so we have more control over focus management
and avoid a delay before they show up.
Extracted the most minimal core initialization functionality from
`setup()` and `setup2()` so that `ClassDB` could be tested properly
(input, audio, rendering, physics etc, are excluded).
Display and rendering servers/singletons are not initialized at all.
Due to the fact that most subsystems are disabled, fixed various crashes in the
process (in order):
- `AcceptDialog` OK/cancel swap behavior (used `DisplayServer` while
`register_scene_types()`);
- `make_default_theme` which depends on `RenderingServer`;
- `XRServer` singleton access while calling `register_modules_types()`;
- hidden bug in a way joypads are cleaned up (MacOS and Linux only).
Removed manual `ClassDB` init/cleanup calls from `test_validate_testing.h`.
ClassDB tests:
Co-authored-by: Ignacio Etcheverry <ignalfonsore@gmail.com>
This code currently isn't compiled (and cannot compile).
We plan to re-add OpenGL ES-based renderer(s) in Godot 4.0 alongside Vulkan
(probably ES 3.0, possibly also a low-end ES 2.0), but the code will be quite
different so it's not relevant to keep this old Godot 3.2 code.
The `drivers/gles2` code from the `3.2` branch can be used as a reference for
a potential new implementation.
This was caused by `XSetWMNormalHints` being called multiple times, each time with different values. Calling the method replaces the old data completely, resulting in some of the settings being lost.
Since the method was called 3 times before the window was mapped, this resulted in the position hint being lost and the window always getting opened at a position determined by the WM.
Implements exit codes into the engine so tests can return their statuses.
Ideally we don't do this, and we use FIXUP logic to 'begin' and 'end' the engine execution for tests specifically.
Since realistically we're initialising the engine here we don't want to do that, since String should not require an engine startup to test a single header.
This lowers the complexity of running the unit tests and even for
physics should be possible to implement such a fix.
Its last use was removed in Godot 3.0, so it no longer makes sense to define.
Also removed `D3D_DEBUG_INFO` for Windows as it's likely a left over from a
long time ago pre-opensourcing when Godot had some form of Direct3D 9 support?
When creating a window, Godot would first register it to the WM(show it) and then set its flags.
This works fine on a floating WM, but on tiling WMs as soon as a window gets registered
the WM immediately acts on the window by scaling it up and treating it as a generic window,
being registered without any special flags.
This commit separates the showing of the window into another function and calls it after the most important flags are set,
making windows with special flags(eg. all popups) work again on tiling WMs.
Fixes#37930
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
- Travis: Change x11 to linuxbsd
- SCons: Change x11 plataform to linuxbsd
- Plugins: Remove ; to avoid fallthrough warning
- DisplayServerX11: Implement set_icon
- DisplayServerX11: Fix X11 bug when a window was erased from windows
map, all the changes from that erased windows are sending to the main
window
- DisplayServerX11: Reorder create_window commands
- DisplayServerX11: Change every Size2 to Size2i and Rect2 to Rect2i
where it belongs
+ More X11 fixes which have been integrated directly back into reduz's
original commits while rebasing the branch.
Rémi Verschelde
Aaron Franke
bruvzg
Connor Lirot
Hugo Locurcio
reduz
Ev1lbl0w
PouleyKetchoupp
Andrii Doroshenko (Xrayez)
opl-
RevoluPowered
Lorenzo Cerqua
Marcel Admiraal
Andy Maloney
Gaël
qarmin
Thakee Nathees
lupoDharkael
Mateo Kuruk Miccino
Juan Linietsky