- Refer to properties explicitly when possible
- When multiple warnings are returned, always separate them by one
blank line to make them easier to distinguish
- Improve grammar and formatting
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
With this change finally one can use compound collisions (like those created
by Gridmaps) without serious performance issues. The previous KinematicBody
code for Bullet was practically doing a whole bunch of unnecessary
calculations. Gridmaps with fairly large octant sizes (in my case 32) can get
up to 10000x speedup with this change (literally!). I expect the FPS demo to
get a fair speedup as well.
List of fixes and improvements:
- Fixed a general bug in move_and_slide that affects both GodotPhysics and
Bullet, where ray shapes would be ignored unless the stop_on_slope parameter
is disabled. Not sure where that came from, but looking at the 2D physics
code it was obvious there's a difference.
- Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision
tests against individual shapes of compound shapes. This is crucial to get
good performance with Gridmaps and in general improves the performance
whenever a KinematicBody collides with compound collision shapes.
- Added code to the broadphase collision detection code used by the Bullet
module for KinematicBodies to also do broadphase on the sub-shapes of
compound collision shapes. This is possible thanks to the dynamic AABB
tree that was previously disabled and it's the change that provides the
biggest performance boost.
- Now broadphase test is only done once per KinematicBody in Bullet instead of
once per each of its shapes which was completely unnecessary.
- Fixed the way how the ray separation results are populated in Bullet which
was completely broken previously, overwriting previous results and similar
non-sense.
- Fixed ray shapes for good now. Previously the margin set in the editor was
not respected at all, and the KinematicBody code for ray separation was
complete bogus, thus all previous attempts to fix it were mislead.
- Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was
used in the ray result array.
There are a whole set of other problems with the KinematicBody code of Bullet
which cost performance and may cause unexpected behavior, but those are not
addressed in this change (need to keep it "simple").
Not sure whether this fixes any outstanding Github issues but I wouldn't be
surprised.
The intent was to avoid creating a physics override to set a default value
that doesn't make a difference, but as #22406 shows it can be necessary to
set the default value *back* after an override was created to set a non-default
value.
Fixes#22406.
Adding angular and linear springs param to PhysicalBone joint type JOINT_TYPE_6DOF,
using new 6DOF feautres implemented in sdfgeoff/godot@e149327.
Typo correction lenear_equilibrium_point to linear_equilibrium_point.
- moved new infinite_inertia argument of move_and_slide and
move_and_slide_with_snap in KinematicBody and KinematicBody2D to the
end if not already there. This makes the order of arguments consistent
and should keep projects from 3.0 compatible as this argument did not
exist in 3.0. Docs updated accordingly.
- renamed max_bounces to max_slides for consistency. Docs updated
accordingly.
- the argument infinite_inertia in test_move is now optional, as it is
in every other movement related method. This closes#22829.
Fixes the following GCC 5 warnings:
```
core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder]
core/object.h:192:15: warning: 'PropertyInfo MethodInfo::return_val' [-Wreorder]
core/object.cpp:278:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder]
core/script_debugger_remote.h:91:6: warning: 'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder]
core/script_debugger_remote.h:92:6: warning: 'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder]
modules/bullet/area_bullet.h:92:39: warning: 'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder]
modules/bullet/area_bullet.cpp:46:1: warning: when initialized here [-Wreorder]
modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder]
modules/bullet/collision_object_bullet.h:117:7: warning: 'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder]
modules/bullet/collision_object_bullet.cpp:67:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:46:33: warning: 'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder]
modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:89:6: warning: 'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:93:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:140:6: warning: 'int GodotAllContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:147:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:166:6: warning: 'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:173:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:191:7: warning: 'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder]
modules/bullet/godot_result_callbacks.h:199:2: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:199:9: warning: 'real_t RigidBodyBullet::mass' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:219:7: warning: 'bool RigidBodyBullet::isTransformChanged' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:208:6: warning: 'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:68:6: warning: 'int SoftBodyBullet::simulation_precision' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:61:14: warning: 'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:95:35: warning: 'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:99:23: warning: 'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder]
modules/gdnative/nativescript/nativescript.h:73:9: warning: 'String NativeScriptDesc::documentation' [-Wreorder]
modules/gdnative/nativescript/nativescript.h:88:9: warning: when initialized here [-Wreorder]
modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder]
modules/gdscript/gdscript.h:294:4: warning: 'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder]
modules/gdscript/gdscript.h:303:2: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder]
scene/3d/physics_body.h:543:7: warning: 'bool PhysicalBone::_internal_static_body' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder]
scene/3d/physics_body.h:539:12: warning: 'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder]
scene/3d/spring_arm.h:43:8: warning: 'float SpringArm::current_spring_length' [-Wreorder]
scene/3d/spring_arm.cpp:37:1: warning: when initialized here [-Wreorder]
scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder]
scene/animation/skeleton_ik.h:152:7: warning: 'bool SkeletonIK::use_magnet' [-Wreorder]
scene/animation/skeleton_ik.cpp:418:1: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder]
scene/resources/tile_set.h:83:7: warning: 'int TileSet::AutotileData::spacing' [-Wreorder]
scene/resources/tile_set.h:92:12: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder]
scene/resources/tile_set.h:114:9: warning: 'Color TileSet::TileData::modulate' [-Wreorder]
scene/resources/tile_set.h:120:12: warning: when initialized here [-Wreorder]
servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder]
servers/physics/body_sw.h:57:11: warning: 'uint16_t BodySW::locked_axis' [-Wreorder]
servers/physics/body_sw.cpp:756:1: warning: when initialized here [-Wreorder]
```
Nothing really relevant for us, but it's not a bad consistency
improvement anyway so worth taking.
Fixes GCC 5 warnings of the form:
core/io/http_client.cpp:288:9: warning: enumeration value 'STATUS_SSL_HANDSHAKE_ERROR' not handled in switch [-Wswitch]
core/io/marshalls.cpp:806:9: warning: enumeration value 'AABB' not handled in switch [-Wswitch]
Those can be trivial cases where adding a default fallback is the solution,
or more complex issues/hidden bugs where missed values are actually meant
to be handled.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
Without this change any new PhysicsBody would show deprecation warnings
due to default values for friction and bounce being defined.
It also enforced a physics material override even when using default
values.
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
Hugo Locurcio
Bojidar Marinov
Rémi Verschelde
qarmin
Daniel Rakos
Juan Linietsky
Juan Linietsky
Ivan Varesi
Guilherme Recchi Cardozo
Andrea Catania
David Sichma
Kelly Thomas
oisincar
Hein-Pieter van Braam
Tiger Caldwell
Marcelo Fernandez
Alexander Alekseev