EditorDebuggerServer::register_protocol_handler must not be called before
editor initialization. Otherwise, if the editor is never initialized,
the added StringName will not be released until static destructors are
called (instead of being release during editor deinitialization).
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
This should greatly decrease latency for the most common use cases.
A new function WebSocketPeer::set_no_delay will allow to configure it if
so desired.
We already removed it from the online docs with #35132.
Currently it can only be "Built-In Types" (Variant types) or "Core"
(everything else), which is of limited use.
We might also want to consider dropping it from `ClassDB` altogether
in Godot 4.0.
- Add some missing descriptions.
- Add links to tutorials for ARVR and AnimationTree.
- Style fixes.
- Engine changes:
* Make `AnimationNodeTransition.input_<number>` properties internal
so that they don't appear in the docs. They still appear in the
inspector based on the actual number of inputs requested.
* Drop unimplemented `CPUParticles.flatness`. It's only used for 3D
particles in `ParticlesMaterial`, and thus only relevant for
`CPUParticles3D`.
* Add bind_ip property to WebSocketServer defaulting to "*" (listen to everyone)
* Set default for GDscript Language Server to listen only to localhost
Fixes potential security issue with GDScript language server being exposed to the
broad net by default.
Since it is the server which primary usage is to provide utility to the local
editor there is no need to expose it.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Follow-up to #31925, `<member />` tags just before `</members>` would cause
a parsing issue, and we'd never notice that we're no longer parsing members.
Also added space before closing `/>`.
The WebSocketMultiplayerPeer was relaying the same message two times,
both in _server_relay and _process_multiplayer (which was only supposed
to store the packet, given the server was one of the destination).
_process_multiplayer now only store the packet, and calls _server_relay
which will relay the message to other clients if needed.
When relaying messages in multiplayer mode.
Could cause a crash in case a malicious client sends a bogus packet and
for those cases where a peer has just disconnected and a message arrive
from another peer with the disconnected one as destination.
The last remaining ERR_EXPLAIN call is in FreeType code and makes sense as is
(conditionally defines the error message).
There are a few ERR_EXPLAINC calls for C-strings where String is not included
which can stay as is to avoid adding additional _MSGC macros just for that.
Part of #31244.
Both client and server are supported on native builds (as usual).
SSL server is still not supported, but will soon be possible with this
new library.
The API stays the same, we just need to work out potential issues due to
this big library switch.
It's the recommended way to set those, and is more portable
(automatically prepends -D for GCC/Clang and /D for MSVC).
We still use CPPFLAGS for some pre-processor flags which are not
defines.
- Document a few more properties and methods
- Add more information to many classes
- Fix lots of typos and gramar mistakes
- Use [code] tags for parameters consistently
- Use [b] and [i] tags consistently
- Put "Warning:" and "Note:" on their own line to be more visible,
and make them always bold
- Tweak formatting in code examples to be more readable
- Use double quotes consistently
- Add more links to third-party technologies
Include paths are processed from left to right, so we use Prepend to
ensure that paths to bundled thirdparty files will have precedence over
system paths (e.g. `/usr/include` should have lowest priority).
Many contributors (me included) did not fully understand what CCFLAGS,
CXXFLAGS and CPPFLAGS refer to exactly, and were thus not using them
in the way they are intended to be.
As per the SCons manual: https://www.scons.org/doc/HTML/scons-user/apa.html
- CCFLAGS: General options that are passed to the C and C++ compilers.
- CFLAGS: General options that are passed to the C compiler (C only;
not C++).
- CXXFLAGS: General options that are passed to the C++ compiler. By
default, this includes the value of $CCFLAGS, so that setting
$CCFLAGS affects both C and C++ compilation.
- CPPFLAGS: User-specified C preprocessor options. These will be
included in any command that uses the C preprocessor, including not
just compilation of C and C++ source files [...], but also [...]
Fortran [...] and [...] assembly language source file[s].
TL;DR: Compiler options go to CCFLAGS, unless they must be restricted
to either C (CFLAGS) or C++ (CXXFLAGS). Preprocessor defines go to
CPPFLAGS.
Apparently, only a single WRITABLE/READABLE callback is called at each
servicing. For this reason, we want to keep servicing until we end up
not receiving any callback.
When that happens, we can assume that we can't (or don't want to) write
more, and that there is nothing left to read in the socket buffer.
I was wrong in assuming that String had to survive long enough to avoid
it, what actually needed to survive was the CharString obtained from the
acsii() or utf8() function.
At least according to valgrind
Coming from strncpy might get you a non-NULL terminated buffer.
The solution, if you accept trunction, is to give one less byte to
strncpy and manually set the last char in the buffer to '\0'.
If the source string is shorter, than the buffer is padded with '\0'
automatically.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
Also implement get_connected_host and get_connected_port in WebSocketPeer
(not supported in HTML5 due to browser limitation).
Add shorthand disconnect_peer(id) for get_peer(id)->close() like in ENet to
WebSocketServer.
Found via `codespell -q 3 --skip="./thirdparty,./editor/translations" -I ../godot-word-whitelist.txt`
Whitelist consists of:
```
ang
doubleclick
lod
nd
que
te
unselect
```
Marcel Admiraal
Stijn Hinlopen
Ignacio Etcheverry
Rémi Verschelde
Fabio Alessandrelli
lupoDharkael
Rajat Goswami
Juan Linietsky
clayjohn
Houkime
Bojidar Marinov
Robin Hübner
qarmin
Hugo Locurcio
marxin
Juan Linietsky
Dualtagh Murray
luz.paz
Adrien Destugues
Wilson E. Alvarez
Poommetee Ketson
George Marques