Fleshed out the "Optimize Mesh" options found in the mesh import UI
Gave a checkbox to every vertex attribute that can be compressed
Surfaced option to enable/disable Octahedral compression for
normal/tangent vectors
Also surfaces the vertex position compression option which previously
inaccessible because the defaults did not compress vertex positions
Supports all current importers (obj, fbx, collada, gltf)
Add new error type to BakeError to signalise that there is no root node to
start baking from.
Document the new error type, as well as BAKE_ERROR_NO_LIGHTMAPPER.
This reduces the size of the editor binaries significantly, as we otherwise
embed all WIP translations, including ones with very low completion ratios,
and end up paying for the size of all `msgid`s for each locale.
Cf. https://github.com/godotengine/godot-proposals/issues/3421 for details.
The thresholds used are:
- 30% for the editor interface (should already include most common strings
while more obscure ones like UndoRedo action names might be untranslated).
- 10% for the class reference: this is a HUGE resource and 10% is already
a lot of useful content, especially if focused on the most used APIs.
For 3.x, we also exclude languages that require complex text layout support
to be displayed properly.
This currently reduces the size of the editor binary by 17% on Linux.
The list will be synced manually every now and then.
Fix some typoed names from the doc
Add _index to "index" parameters of *_shape_* signals, this is both in doc and in the template. This makes the code, signature and doc easier to understand
Add method to get Node from the _index params of those signals. This was not as easy to find as one would expect. Putting this information where it is needed will help.
This patch fixes rendering of multiple reflection probes for a single
mesh in the GLES2 renderer. If there were two reflection probes, one of
them would always have the `interior` option flipped, resulting in
broken blending between probes and flickering of ambient reflection.
Also make note of GLES2 reflection probe limit
Very low wait times behave in unpredictable ways depending on the
rendered frame rate. This is because the timeout signal is only emitted
once per rendered frame (or physics frame, depending on the timer's
process mode).
This provides more realistic lighting with a very small performance cost.
The option is available in both GLES3 and GLES2, and can be enabled in
the Project Settings. This goes well with the ACES Fitted tonemapping mode
that was recently added.
When enabled, this also makes upgrading Godot 3.x projects to Godot 4.0 easier,
since lighting in 3.x will better match how it'll look in Godot 4.0.
Merge the PO translations with the new template.
This adds the following changes:
- 8000 strings are still valid as is (80%)
- 2000 strings are marked fuzzy and need reviewing (20%)
- 1000 strings are new and need translation
These are based on the `master` API from mid-2020 so they're somewhat outdated.
Some strings will be marked as fuzzy (needs review) and new strings will be
added in the next commit.
Change extract script `path` argument to support specifying multiple
paths, like `makerst.py`. This prevents parsing invalid XML files while
scanning the whole repository.
(cherry picked from commit 87d23bf85a)
Allows more flexible collision detection with different safe margin values.
Kinematic body motion changes in 2D and 3D:
-Recovery only for depth > min contact depth to help with collision
detection consistency (rest info could be lost if recovery was too much)
-Adaptive min contact depth (based on margin) instead of space parameter
This method extracts the 2 or 3-letter language code from `OS::get_locale()`,
making it easier for users to identify the "main" language code for users
that might have different OS locales due to different OS or region, but
should be matched to the same translation (e.g. "generic" Spanish).
Fixes#40703.
(cherry picked from commit def99c7baf)
This pull request adds a small amendment to `SceneTree` describing the behavior `_physics_process()` when pausing the scene.
`_physics_process` will completely stop processing collisions and signals whenever the scene is paused, however, the function will still receive calls.
This addresses: #47326
(cherry picked from commit d62175e009)
An attempt to improve the documentation for Thread
- Adds documentation on how and when the `wait_to_finish` should be used
- Adds a note on what to be careful about when using `wait_to_finish`
(cherry picked from commit 9e2882a989)
This makes setting up AudioStreamPlayer3D nodes for Doppler playback
a bit easier.
- Move AudioStreamPlayer3D's Doppler Tracking property outside a group
since the group only had 1 property, which resulted in unnecessary
folding in the inspector.
- Put the AudioStreamPlayer3D Playing and Autoplay properties higher up
in the inspector since these are likely to be modified often.
Browsers doesn't really like forcing the mix rate, e.g. Firefox does not
allow input (microphone) if the mix rate is not the default one, Chrom*
will exhibit worse performances, etc.
Implements per-pixel transparency feature on Android.
Allows plugins to do specific rendering and render godot UI on top
(useful for camera support with drawing on top).
The PVS mode enum had been declared using scope operator, which does not seem to work correctly from GDScript with the BIND_ENUM_CONSTANT macro.
This PR removes the scope operator in the declaration.
For both 2D and 3D, three methods are added:
- `get_floor_angle` on `KinematicBody` to get the floor angle.
- `get_angle` on `KinematicCollision` to get the collision angle.
- `get_last_slide_collision` to quickly get the latest collision of `move_and_slide`.
This is already supported by FreeType, but it wasn't exposed.
Adding support for WOFF2 would require linking a Brotli decompression
library in Godot, so only WOFF1 is exposed here.
Update mesh_surface_get_format_stride and
mesh_surface_make_offsets_from_format to return an array of offsets and
an array of strides in order to support vertex stream splitting
Update _get_array_from_surface to also support vertex stream splitting
Add a condition on split stream usage to ensure it does not get used on
dynamic meshes
Handle case when Tangent is compressed but Normal is not compressed
Make stream splitting option require a restart in the settings
Update SoftBody and Sprite3D to support and use strides and offsets
returned by updated visual_server functions
Update Sprite3D to use the dynamic mesh flag
* Make Undo/Redo menu items disabled when clicking it does nothing.
* Context menu of `TextEdit`
* Context menu of `LineEdit`
* Editor's Scene menu
* Script editor's Edit menu and context menu (for Script and Text)
* Make editor undo/redo log messages translatable.
* Mark `UndoRedo`'s `has_{un,re}do()` methods as `const`.
* Expose `TextEdit`'s `has_{un,re}do()` to scripts since `{un,re}do()` are already available.
Add framework for supporting geometrical occluders within rooms, and add support for sphere occluders.
Includes gizmos for editing.
They also work outside the portal system.
Rémi Verschelde
Max Hilbrunner
Rémi Verschelde
Kongfa Waroros
Hugo Locurcio
PouleyKetchoupp
Gustavo Beltrão Braga
Yuri Sizov
Omar El Sheikh
skyace65
Aaron Franke
Pedro J. Estébanez
SeleckyErik
Anutrix
Maxime Lapointe
Xeadriel
Fabio Alessandrelli
Fredia Huya-Kouadio
Timur Celik
Дмитрий Сальников
zacryol
Lisandro Lorea
Thakee Nathees
Brian Semrau
Ansraer
kobewi
lawnjelly
zacryol
Haoyu Qiu
O01eg
Michael Alexsander
bruvzg
mechPenSketch
Nick Huelin
Jummit
Marcus Brummer
georgespatton
skysphr
Zak
Kyle
Austin Tasato
Arthur Paulino
Bengt Söderström
Álex Román Núñez
Yuri Roubinsky
LoipesMas
Vincent
Endri Lauson
Gilles Roudière
Wilson E. Alvarez
nobuyuki_nyuu
Clay John
Bastiaan Olij