This allows to specify any valid folder name (including with subfolders) to use
as user:// on all platforms. The folder is constrained to the platform-specific
OS::get_data_path() (typically what `XDG_DATA_HOME` resolves to).
Fixes#13236.
That "revision" was inherited from SVN days but had been since then
used to give information about the build: "custom_build", "official",
"<some distro's build>".
It can now be overridden with the BUILD_NAME environment variable.
Removes the need for _MKSTR all over the place which has the drawback of
converting _MKSTR(UNKNOWN_DEFINE) to "UKNOWN_DEFINE" instead of throwing
a compilation error.
Spec version 0.7 from https://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
(latest as of this commit).
Three virtual methods are added to OS for the various XDG paths we will use:
- OS::get_data_path gives XDG_DATA_HOME, or if missing:
~/.local/share on X11, ~/Library/Application Support/ on macOS and %APPDATA% on Windows
- OS::get_config_path gives XDG_CONFIG_HOME, or if missing:
~/.config on X11, ~/Library/Application Support/ on macOS and %APPDATA% on Windows
- OS::get_cache_path gives XDG_CACHE_HOME, or if missing:
~/.cache on X11, ~/Library/Caches on macOS and %APPDATA% on Windows
So for Windows there are no changes, for Linux we follow the full split spec
and for macOS stuff will move from ~/.godot to ~/Library/Application Support/Godot.
Support for system-wide installation of templates on Unix was removed for now,
as it's a bit hackish and I don't think anyone uses it.
user:// will still be OS::get_data_path() + "/godot/app_userdata/$name" by
default, but when using the application/config/use_shared_user_dir option
it will now use XDG_DATA_HOME/$name, e.g. ~/.local/share/MyGame.
For now everything still goes in EditorSettings::get_settings_dir(), but
this will be changed in a later commit to make use of the new splitting
where relevant.
Part of #3513.
There are still some left in the Android Java code, even stuff to swap between
GLES1 and GLES2 support from early Godot days... would be good to see some cleanup
there too one day.
The "graphics/api" option for Android exports is removed, as only GLES 3.0 is supported.
It can be readded when GLES 2.0 support comes back. Fixes#13004.
Previously logging logic was scattered over OS class implementations
with plenty of duplication. Major changes in this commit:
- Extracted logging logic into a separate Logger hierarchy. It allows
easy configuration of logging mechanism depending on compile-time or
run-time configuration.
- Implemented RotatedFileLogger which is usually used with StdLogger,
providing persistency of logs. It is often important to be able to
obtain logs of the game even in production to be able to understand
what happened prior to some problem. On mobile there previously was
no way to obtain the logs aside from having the device connected to
your machine.
- flush() is not performed in release mode for every logged line. It
is only performed for errors.
Rename user facing methods and variables as well as the corresponding
C++ methods according to the folloming changes:
* pos -> position
* rot -> rotation
* loc -> location
C++ variables are left as is.
Now that we have a built-in stacktrace on a segfault it would be useful
to have debug information on debug_release builds so that bugreports can
include this information. Without this debug info we will still get
function names in the backtrace but not file location.
This commit will by default build all targets with minimal debug info
and then strip the information into separate files. On MacOS this is a
.dSYM file, on Linux/MingW this is a .debug file. MacOSX will
automatically load a dSYM file if it exists in its debugger. On
Linux/MingW we create a 'gnu debuglink' meaning that gdb and friends
will automatically find the debug symbols if they exist.
Existing workflow for developers does not change at all, except that we
now create two instead of one build artifact by default.
This commit also adds a 'debug_symbols' option to X11, MacOS, and MingW
targets. The default is 'yes' which corresponds to -g1. The alternatives
are 'no' (don't generate debug infos at all) or 'full' which runs with
-g2. A target=debug build will now build with -g3.
After discussing with @reduz and @akien-mga it was decided that we do
not allow assignments or declarations in if statements. This PR removes
the instances of this I could find by automated means.
We need the efficient SRWLock methods which are not supported on Vista,
and loading them dynamically while providing fallbacks is not worth the
effort. Closes#10243.
Sorry Vista users... As you are running a supported which is no longer
supported by Microsoft (https://support.microsoft.com/en-us/help/13853/windows-lifecycle-fact-sheet),
we can only encourage you to upgrade to a more recent version if you can,
or switch to Linux, which should give your old hardware a new youth.
When looking up a symbol from a library, previously an error was
shown when the symbol did not exist. That caused confusion when the
lookup was completely optional.
This adds a new parameter to that method so that those errors can
be handled manually if needed.
Tried to organize the configure(env) calls in sections, using the same order
for all platforms whenever possible.
Apart from cosmetic changes, the following issues were fixed:
- Android: cleanup linkage, remove GLESv1_CM and GLESv2
- iPhone: Remove obsolete "ios_gles22_override" option
- OSX:
* Fix bits detection (default to 64) and remove obsolete "force_64_bits" option
(closes#9449)
* Make "fat" bits argument explicit
- Server: sync with X11
- Windows: clean up old DirectX 9 stuff
- X11:
* Do not require system OpenSSL for building (closes#9443)
* Fix typo'ed use_leak_sanitizer option
* Fix .llvm suffix overriding custom extra_suffix
This module was written by bojidar-bg and me, with the help of ClikCode and touilleMan.
This adds a module to Godot that enables the use of dynamic libraries as a source for scripts.
That also allows third party libraries to be linked to Godot more easily and without creating modules.
For a readme see https://github.com/GodotNativeTools/godot_headers/blob/master/README.md
All the warnings are factored out of the platform-specific files and moved to
SConstruct. Will have to check that it does not introduce regressions on some
platforms/compilers.
(cherry picked from commit 31107daa1a)
The ID property for InputEvents is set by `SceneTree` when sending the event down the tree.
So there's no need for the platform specific code to set this value when it will later be overriden anyway...
I can show you the code
Pretty, with proper whitespace
Tell me, coder, now when did
You last write readable code?
I can open your eyes
Make you see your bad indent
Force you to respect the style
The core devs agreed upon
A whole new world
A new fantastic code format
A de facto standard
With some sugar
Enforced with clang-format
A whole new world
A dazzling style we all dreamed of
And when we read it through
It's crystal clear
That now we're in a whole new world of code
The other subfolders of tools/ had already been moved to either
editor/, misc/ or thirdparty/, so the hiding the editor code that
deep was no longer meaningful.
Done:
- X11, server (tested)
- Windows (developed, would be nice to retest)
- OSX (not tested)
Prepared (not developed):
- Android (code is here, but may not compile)
- iphone
- winrt
- bb10
- haiku
- javascript
Now InputDefault is responsible for giving out joypad device IDs to the platform, instead of each platform handling this itself.
This makes it possible for c++ modules to add their own "custom" gamepad devices, without the risk of messing up events in case the user also has regular gamepads attached (using the OS code).
For now, it's implemented for the main desktop platforms.
Possible targets for future work: android, uwp, javascript
In #7839 I see the same error that was fixed in #7833 occuring on the
Windows platform. This moves the audio driver closing to the same place
in OS_Windows::finalize() as it is in OS_X11::finalize()
This fixes#7839
This doesn't seem to be needed anymore and the code to free the unused
rasterizer was throwing a memory violation since it was getting set to a
value somehow.
We should probably create a specific function for setting the
recv buffer anyway. UDP sockets does not need to bind (listen)
to be able to call recvfrom. This is especially useful for clients
who just call set_send_address and start communicating with a server.
- TCP:
- `listen` bind to wildcard "*" -> dual stack socket
- `listen` bind to address -> socket from address type
- `connect` -> resolve using best protocol (UNSPEC), socket from address type
- UDP:
- `listen` bind to wildcard "*" -> dual stack socket
- `listen` bind to address -> socket from address type
- `put_packet`/`put_var` -> resolve using TYPE_ANY (UNSPEC), socket from address type
(to change socket type you must first call `close` it)
Pedro J. Estébanez
Unknown
Juan Linietsky
Bastiaan Olij
Rémi Verschelde
Rhody Lugo
Dmitry Koteroff
Indah Sylvia
Ruslan Mustakov
AndreaCatania
mhilbrunner
Marcelo Fernandez
Andreas Haas
Poommetee Ketson
Felix M. Cobos
Elliott Sales de Andrade
Ruslan Mustakov
Hein-Pieter van Braam
letheed
Thomas Herzog
Maxim Sheronov
Wilson E. Alvarez
TwistedTwigleg
Bojidar Marinov
Karroffel
bruvzg
Hugo Locurcio
George Marques
alexholly
Andreas Haas
Timo Schwarzer
toger5
Fabio Alessandrelli
Sergey Pusnei
eska
Julian Murgia
Ignacio Etcheverry
Saracen
Kenneth Lorthioir
Ilija Boshkov