The input to smoothstep is not actually a weight, and the decscription
of smoothstep was pretty hard to understand and easy to misinterpret.
Clarified what it means to be approximately equal.
nearest_po2 does not do what the descriptions says it does. For one,
it returns the same power if the input is a power of 2. Second, it
returns 0 if the input is negative or 0, while the smallest possible
integral power of 2 actually is 1 (2^0 = 1). Due to the implementation
and how it is used in a lot of places, it does not seem wise to change
such a core function however, and I decided it is better to alter the
description of the built-in.
Added a few examples/clarifications/edge-cases.
In general they are more confusing to users because they expect
inheritance to fully override parent methods. This behavior can be
enabled by script writers using a simple super() call.
Implements exit codes into the engine so tests can return their statuses.
Ideally we don't do this, and we use FIXUP logic to 'begin' and 'end' the engine execution for tests specifically.
Since realistically we're initialising the engine here we don't want to do that, since String should not require an engine startup to test a single header.
This lowers the complexity of running the unit tests and even for
physics should be possible to implement such a fix.
UDPServer now uses a single socket which is shared with the
PacketPeerUDP it creates and has a new `poll` function to read incoming
packets on that socket and delivers them to the appropriate peer.
PacketPeerUDP created this way never reads from the socket, but are
allowed to write on it using sendto.
This is needed because Windows (unlike Linux/BSD) does not support
packet routing when multiple sockets are bound on the same address/port.
- Extacted all syntax highlighting code from text edit
- Removed enable syntax highlighting from text edit
- Added line_edited_from signal to text_edit
- Renamed get/set_syntax_highlighting to get/set_syntax_highlighter
- Added EditorSyntaxHighligher
- Use the `.log` file extension (recognized on Windows out of the box)
to better hint that generated files are logs. Some editors provide
dedicated syntax highlighting for those files.
- Use an underscore to separate the basename from the date and
the date from the time in log filenames. This makes the filename
easier to read.
- Keep only 5 log files by default to decrease disk usage in case
messages are spammed.
So places that need to look into it can use the list instead of parsing
ProjectSettings details (like checking "*" in path for testing if it's
singleton).
Fix errors when comparing strings with large numbers (> INT64_MAX).
Comparisons now occur by comparing individual digits, instead of
converting to int64_t first.
Current error checks for to_int and to_int64 do not issue overflow error
messages for INT64_MAX + 1, INT64_MAX + 2, and other numbers close to the
integer limits. Likewise, error checks for hex_to_int, hex_to_int64 and
bin_to_int64 issue false positive error messages for INT64_MIN or INT32_MIN.
This commit fixes these error checks.
This change makes the behavior consistent when the value
is not found between erasing from an empty list
(no error, just returning false) and erasing from a non-empty list
(previously displaying triggering an error and returning false).
Error message previously triggered:
ERROR: erase: Condition ' !p_I ' is true. returned: false
At: ./core/list.h:157.
Custom monitors can be added/removed/checked using `Performance.add_custom_monitor`/`Performance.remove_custom_monitor`/`Performance.has_custom_monitor`
The value can be viewed in the `Monitor` tab of Debugger.
Text before `/` is used to categorize the custom monitor.
`EditorPerformanceProfiler` class is created to separate logic from `ScriptEditorDebugger`
User can click on the graph of monitors to read the value at that point.
Graph includes intermediate base lines.
Fix calculation for negative times to ensure Sundays are wrapped around to '0'
instead of '7', making it consistent with the output for positive times.
- Fixed floating point issue on the old one.
- Fixed the equation on the get_euler_yxz function.
- Added unit tests.
This work has been kindly sponsored by IMVU.
Fixes#36372 as Path2D/Path3D's `curve` property no longer uses a Curve
instance as default value, but instead it gets a (unique) default Curve
instance when created through the editor (CreateDialog).
ClassDB gets a sanity check to ensure that we don't do the same mistake
for other properties in the future, but instead use the dedicated
property usage hint.
Fixes#36372.
Fixes#36650.
Supersedes #36644 and #36656.
Co-authored-by: Thakee Nathees <thakeenathees@gmail.com>
Co-authored-by: simpuid <utkarsh.email@yahoo.com>
Note:
Casting to the C++ classes and calling the methods there would work as well,
but would require including he header files for the specific object types handled
here, which wouldn't be OK either.
Each time `r_err_str` is set, we should return a parse error.
Removed redundant `return OK;` which were already handled after the big
`if`/`else if`/`else` for `TK_IDENTIFIER`.
Part of #17372.
Godot currently supports zero padding for integers, octals and
hexadecimals when using format strings, but not for floats.
This commit adds support for zero padding for floats, thus ensuring
consistent behavior for all types, and making Godot's format specifiers'
behavior closer to c's `printf()`.
Before: `print("<%07.2f>" % -0.2345)` prints `< -0.23>`.
Now: `print("<%07.2f>" % -0.2345)` prints `<-000.23>`.
`print("<%7.2f>" % -0.2345)` prints `< -0.23>`.
`erase()` calls `find()` to get the index of the element to remove, if
any.
c2151e1813/core/local_vector.h (L77-L81)
`find()` returns a signed integer. In particular, it returns -1 if
no element is found. Since `erase()` converts this to an unsigned type, the
wrong element may be erroneously removed from the vector.
Other ways to fix this would involve changing function signatures, so
this seemed to be the least disruptive change.
Fixes#38884
Semicolons are not necessary after function definitions or control flow
blocks, and having some code use them makes things inconsistent (and
occasionally can mess up `clang-format`'s formatting).
Removing them is tedious work though, I had to do this manually (regex
+ manual review) as I couldn't find a tool for that. All other code
folders would need to get the same treatment.
Remove _sort_children from script bindings:
_sort_children is an internal method which shouldn't be exposed to scripts.
Added support for non-bound methods in MessageQueue:
So we can use deferred calls without exposing internal methods to scripts.
Added debug checks in CallableCustomMethodPointer:
Adding method pointer callables to the message queue was causing crashes
in case an object was destroyed and the same memory was allocated for
another one. The new object had a valid object id but the call was erroneous.
Release will be fixed later, along with Variant which has the same problem and
is also fixed for debug only.
As of Godot 3.0, HQ2X is no longer used to upscale the editor theme
and icons on hiDPI displays, which limited its effective uses.
HQ2X was also used to upscale the project theme when the "Use Hidpi"
project setting was enabled, but results were often less than ideal.
The new StyleBoxFlat and SVG support also make HQ2X less important
to have as a core feature.
This decreases binary sizes slightly (-150 KB on most platforms,
-212 KB on WebAssembly release).
This partially addresses #12419.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
-Added LocalVector (needed it)
-Added stb_rect_pack (It's pretty cool, we could probably use it for other stuff too)
-Fixes and changes all around the place
-Added library for 128 bits fixed point (required for Delaunay3D)
This reverts commit ec7b481170.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
Now the stack saved in a `GDScriptFunctionState` is cleared as soon as the `yield()` operation is known not to be resumed because either the script, the instance or both are deleted.
This clears problems like leaked objects by eliminating cases of circular references between `GDScriptFunctionState`s preventing them and the objects they refer to in their saved stacks from being released. As an example, this makes using `SceneTreeTimer` safer.
Furthermore, with this change it's now possible to print early warnings about `yield()`s to released script/instances, as now we know they won't be successfully resumed as the condition for that happens. However, this PR doesn't add such messages, to keep the observed behavior the same for the time being.
Also, now a backup of the function name in `GDScriptFunctionState` is used, since the script may not be valid by the time the function name is needed for the resume-after-yield error messages.
Skew is x-axis only, because it must be bidirectionally convertible to a 2x3 matrix, but you can subtract it to the rotation to get the effect on y-axis
This fixes numerous false positives coming out of the culling system.
AABB checks are now a full separating-axis check against the frustum, with the points of the frustum being compared to the planes of the box just as the points of the box were being compared to the planes of the frustum. This fixes large objects behind the camera not being culled correctly.
Some systems that used frustums that were (sometimes mistakenly?) unbounded on one or more side have been modified to be fully enclosed.
`OS.shell_open()` will pass on the path directly to the OS' shell
handler (which can handle file paths or URLs). It can't handle
Godot-specific paths, so these need to be converted with
`ProjectSettings.globalize_path()` first.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
The 204 and 205 are the older, SDL 2.0.4 and 2.0.5 compatible mappings,
but since all new mappings have only been added to the main
gamecontrollerdb.txt which overrides the older entries, it doesn't make
much sense for us to keep the old databases.
We do not support the SDL2 half axes and inverted axes features from
gamecontrollerdb.txt, but this only impacts the specific controllers
which can use those features, the rest are parsed and used properly.
As for godotcontrollerdb.txt, it doesn't make sense for us to maintain
our own custom mappings instead of submitting them upstream. The only
exception is the Javascript and UWP platforms for which no bindings are
available upstream, so we keep those entries.
Note: Only replaced 2 instances to test, Node.get_children and TileMap.get_used_cells
Note: Will do a mass replace on later PRs of whathever I can find, but probably need
a tool to grep through doc.
Warning: Mono will break, needs to be fixed (and so do TypeScript and NativeScript, need to ask respective maintainers)
Also added an easier way to load native GLSL shaders.
Extras:
Had to fix no-cache for subresources in resource loader, it was not properly working, making shaders not properly reload.
Note:
The precommit hooks are broken because they don't seem to support enums from one class being used in another.
Feel free to fix this after merging this PR.
Also implemented decal atlas, so projectors and other stuff can be added.
Sidenote: Had to make RID hashable, so some unrelated includes changed
in order to include it in hashfuncs.h
