Reporting rest collision information is needed for move_and_collide and
move_and_slide so floor detection can be done properly, but in the case
of just testing the motion for collision, it makes sense to return false
if the body is able to move all along the path without being stopped.
Updated the logic in test_move and clarified the documentation for
test_move and move_and_collide.
Settings that aren't within a subsection are difficult to reach when
other settings do have a subsection.
This also adds documentation for the project setting.
In all physics servers, body_get_direct_state() now silently returns
nullptr when the body has been already freed or is removed from space,
so the client code can detect this state and invalidate the body rid.
In 2D, there is no change in behavior (just no more errors).
In 3D, the Bullet server returned a valid direct body state when the
body was removed from the physics space, but in this case it didn't
make sense to use the information from the body state.
Center of mass in body's local space is more useful than the transformed
one in some cases, like drawing its position for debug.
It's especially useful to get the generated local center of mass when
in auto mode (by default).
Physics Server BODY_PARAM_CENTER_OF_MASS:
Now always returns the local center of mass, instead of setting a local
center of mass and getting a transformed one.
This causes compatibility breaking, but it makes more sense for the
parameter to be consistent between getter and setter.
Direct Body State:
There are now two properties, because both of them can be useful in
different situations.
center_of_mass: relative position in global coordinates (same as before)
center_of_mass_local: position in local coordinates
Same as what is already done for shape queries, applied to point and ray
queries. Easier to document and more flexible to add more parameters.
Also expose intersect_point method to script in 3D.
Remove intersect_point_on_canvas in 2D, replaced with a parameter.
Only Vulkan is fully implemented for now, so OpenGL isn't available
in the project manager yet.
This also makes the rendering driver checks use lowercase names
everywhere for consistency.
- Rename OpenGL to GLES3 in the source code per community feedback.
- The renderer is still exposed as "OpenGL 3" to the user.
- Hide renderer selection dropdown until OpenGL support is more mature.
- The renderer can still be changed in the Project Settings or using
the `--rendering-driver opengl` command line argument.
- Remove commented out exporter code.
- Remove some OpenGL/DisplayServer-related debugging prints.
area_shape_entered and area_shape_exited had the exact same description. Changed area_shape_exited's description to specify that the signal is emitted when another area's shape exits rather than enters this area's shapes.
Damping values are now non-negative.
Add new properties linear_damp_mode and angular_damp_mode to set the way
RigidDynamicBody and PhysicalBone (2D & 3D) use damping values.
It can now be Combine (default) to add to the default/areas, or Replace
to override the value completely (current behavior).
The parent `_validate_property()` wasn't called, which led to shadow
properties being visible even if shadows were disabled on a
DirectionalLight3D node.
Fix NavigationObstacle3D to be attached to navigation map - without it
the NavigationObstacle3D is not working.
Replace radius approximation algorithm with simple "radius" property.
* Made the Basis euler orders indexed via enum.
* Node3D has a new rotation_order property to choose Euler rotation order.
* Node3D has also a rotation_mode property to choose between Euler, Quaternion and Basis
Exposing these modes as well as the order makes Godot a lot friendlier for animators, which can choose the best way to interpolate rotations.
The new *Basis* mode makes the (exposed) transform property obsolete, so it was removed (can still be accessed by code of course).
Some split distance properties are unused depending on the
current shadow mode. Also, Blend Splits can only be used if the shadow
mode is PSSM 2 Splits or PSSM 4 Splits.
This also moves the Fade Start property to be located after the
split properties. This avoids intertwining "conditional" properties
with a property that's always available.
The built-in ALPHA in spatial shaders comes pre-set with a per-instance
transparency value. Multiply by it if you want to keep it.
The transparency value of any given GeometryInstance3D is affected by:
- Its new "transparency" property.
- Its own visiblity range when the new "visibility_range_fade_mode"
property is set to "Self".
- Its parent visibility range when the parent's fade mode is
set to "Dependencies".
The "Self" mode will fade-out the instance when reaching the visibility
range limits, while the "Dependencies" mode will fade-in its
dependencies.
Per-instance transparency is only implemented in the forward clustered
renderer, support for mobile should be added in the future.
Co-authored-by: reduz <reduzio@gmail.com>
Roughly based on https://github.com/godotengine/godot-proposals/issues/3375 (used format is slightly different).
* Implement bitwidth based animation compression (see animation.h for format).
* Can compress imported animations up to 10 times.
* Compression format opens the door to streaming.
* Works transparently (happens all inside animation.h)
This can be used to improve 3D shadow rendering quality at little
performance cost. Unlike the existing Hard setting which is limited
to variable shadow blur only, it works with both fixed blur and
variable blur.
This reduces the size of the editor binaries significantly, as we otherwise
embed all WIP translations, including ones with very low completion ratios,
and end up paying for the size of all `msgid`s for each locale.
Cf. https://github.com/godotengine/godot-proposals/issues/3421 for details.
The thresholds used are:
- 30% for the editor interface (should already include most common strings
while more obscure ones like UndoRedo action names might be untranslated).
- 10% for the class reference: this is a HUGE resource and 10% is already
a lot of useful content, especially if focused on the most used APIs.
This currently reduces the size of the editor binary by 17% on Linux.
The list will be synced manually every now and then.
(cherry picked from commit 8425c58991)
It's easy to assume they are the same, but they are quite different for the two types of 2D lights. For myself, it took a bit of confusion and experimentation for me to figure out why this behaviour changed when I changed from point to directional. Hopefully it can save somebody else the trouble.
* New track type BLEND_SHAPE
* Blend shapes are imported via this new track type
* Processing is more optimized (no longer relies on variants)
* Modified the Blend Shape API in MeshInstance3D to use indices rather than StringNames (more optimizes)
* Promo: Fixed a small bug in gizmo updating in Node3D that affected performance
Dedicated BlendShape tracks are required for both optimization and eventually implementing them in animation compression.
* New plugin system to control the whole import workflow
* Can add options and run code at every import step (general, per node, mesh, animation, material etc.)
This constitutes a first version of these plugins. The ability to interact with the import preview dialog will likely be added later on.
We've had many issues with WebM support and specifically the libvpx library
over the years, mostly due to its poor integration in Godot's buildsystem,
but without anyone really interested in improving this state.
With the new GDExtensions in Godot 4.0, we intend to move video decoding to
first-party extensions, and this would likely be done using something like
libvlc to expose more codecs.
Removing the `webm` module means we can remove libsimplewebm, libvpx and
opus, which we were only used for that purpose. Both libvpx and opus were
fairly complex pieces of the buildsystem, so this is a nice cleanup.
This also removes the compile-time dependency on `yasm`.
Fixes lots of compilation or non-working WebM issues which will be linked
in the PR.
Fix some typoed names from the doc
Add _index to "index" parameters of *_shape_* signals, this is both in doc and in the template. This makes the code, signature and doc easier to understand
Add method to get Node from the _index params of those signals. This was not as easy to find as one would expect. Putting this information where it is needed will help.
* Animations and Skeletons are now pose-only.
* Rest transform is kept as reference (when it exists) and for IK
* Improves 3D model compatibility (non uniform transforms will properly work, as well as all animations coming from Autodesk products).
* `Animation.TYPE_TRANSFORM3D` track is gone.
* Added POSITION_3D, ROTATION_3D, SCALE_3D tracks.
* GLTF2, Collada, FBX importers will only import the track types found.
* Skeleton3D bone poses are now Pos/Rot/Scale, pose matrix removed.
* AnimationPlayer and AnimationTree animate these tracks separately, only when found.
* Removed BakeReset code, is useless with these changes.
This is the first in a series of commits designed to make the animation system in Godot more useful, which includes:
* Better compatibility with Autodesk products
* Better reusability of animations across models (including retargeting).
* Proper animation compression.
* etc.
*Note* GLTF2 animation saving went broken with this PR, needs to be fixed in a subsequent one.
Very low wait times behave in unpredictable ways depending on the
rendered frame rate. This is because the timeout signal is only emitted
once per rendered frame (or physics frame, depending on the timer's
process mode).
This allows for finer control over 3D rendering resolution.
Supersampling can also be performed by setting a 3D rendering
resolution above 1.0, which is useful for offline rendering or
for very high-end GPUs.
If the class name is modified, its name in the description should be too.
However, pluralization is a bit complicated in this case. I'll give the options `RefCounteds` and `reference-counted objects`. Maybe both can be used.
This property was intended to provide a way to have SSAO or VoxelGI
ambient occlusion with a color other than black. However, it was
dropped during the Vulkan renderer development due to the performance
overhead it caused when the feature wasn't used.
The files are directed copied from the version which was merged in `3.x`
together with the translations from Weblate.
For future commits we can do cherry-picks from `3.x` to `master` like usual
for the editor translations.
Rémi Verschelde
Rémi Verschelde
boruok
PouleyKetchoupp
megalobyte
Hugo Locurcio
Yuri Sizov
Tomasz Chabora
qarmin
Hendrik Brucker
Pedro J. Estébanez
Andrii Doroshenko (Xrayez)
Max Hilbrunner
Yuri Roubinsky
Anutrix
bruvzg
Brian Semrau
Aaron Franke
Gustavo Beltrão Braga
rafallus
Silc 'Tokage' Renew
Emmanuel Leblond
Clay John
Laelaps9
David Sichma
Michael Alexsander
Gilles Roudière
ConteZero
Max Hilbrunner
Pawel Lampe
reduz
JFonS
skyace65
Haoyu Qiu
Duroxxigar
Raul Santos
Bastiaan Olij
Murilo Gonçalves
nabfrew
ne0fhyk
mennomax
Maxime Lapointe
Xeadriel
Дмитрий Сальников
Paulb23
zacryol
DeeJayLSP
Fabio Alessandrelli