Fixes the following GCC 5 warnings and actual bugs:
```
drivers/unix/net_socket_posix.cpp:562:28: warning: comparison between 'enum IP::Type' and 'enum NetSocket::Type' [-Wenum-compare]
modules/gdscript/gdscript_function.cpp:792:26: warning: comparison of constant '17' with boolean expression is always true [-Wbool-compare]
modules/gdscript/gdscript_function.cpp:792:26: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
modules/gdscript/gdscript_parser.cpp:5082:58: warning: comparison of constant '6' with boolean expression is always false [-Wbool-compare]
modules/gdscript/gdscript_parser.cpp:5082:58: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses]
modules/mbedtls/stream_peer_mbed_tls.cpp:286:45: warning: comparison between 'enum StreamPeerTCP::Status' and 'enum StreamPeerSSL::Status' [-Wenum-compare]
modules/mbedtls/stream_peer_mbed_tls.cpp:313:45: warning: comparison between 'enum StreamPeerTCP::Status' and 'enum StreamPeerSSL::Status' [-Wenum-compare]
```
Since Windows 2000:
Calling recv/recvfrom when an ICMP reply was received from a previous
send/sendto, may result in a WSAECONNRESET error.
Since Windows Vista(?)/Windows Server 2008:
Calling recv/recvfrom when an ICMP reply was received from a previous
send/sendto, may also result in a WSAENETRESET error.
Both those features are disabled by this commit using disabling
SIO_UDP_CONNRESET and SIO_UDP_NETRESET on newly created UDP sockets.
WSAPoll is broken by design.
It was announced as the new way to introduce compatibility to posix
sockets, their implementation was broken, and they decided not to fix it.
You can read the full story here:
https://daniel.haxx.se/blog/2012/10/10/wsapoll-is-broken/
Unified BSD and Winsock sockets into a single implementation of a
generic NetSocket interface.
This is some ground work for few network improvements:
- Reuse as much code as possible between Posix and Windows.
- Provide a single point of implementation for exotic sdks (consoles).
- Provide platform agnostic StreamPeerTCP and PacketPeerUDP in core.
- Implement connect for UDP allowing for DTLS implementation.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
Use a Microsoft recommended way of process termination for the project
process run from the editor. This allows loaded DLLs to receive and handle
DLL_PROCESS_DETACH notification and cleanup any global state before the
process actually exits.
Implements the same heuristic as Curl (and web browsers): if no `Content-Length`, no `Connection: keep-alive` and no chunked transfer encoding, assume th rest of the data until EOF is the body, gracefully setting the HTTP client back to the disconnected state.
Theoretically, this is not compliant with HTTP 1.1, by which `keep-alive` is the default, but in practice, an explicit header is sent by servers.
- Adds q/quit option to console debugging
- Adds options (variable_prefix)
- Breaks into debugger with Ctrl-C in local debug mode (Unix/Windows)
- Added option to list all breakpoints
- Fixes add/remove breakpoint bug (invalid path parsing)
- Minor cleanup
when godot could be found in PATH.
The correct fix is to use sysctl to get the path to the current executable
this also fixes the ability to call external commands.
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
As spotted by @robfram, closes#15288.
Also reviewed other uses of `if (String.find(.*))` for potential similar mistakes, found a wrong (and useless) one in ScriptEditorDialog.
They are NOT constant methods, as state by the comment message,
they fetch the last packet and then forget about it, actively
changing the state of the object.
This allows to specify any valid folder name (including with subfolders) to use
as user:// on all platforms. The folder is constrained to the platform-specific
OS::get_data_path() (typically what `XDG_DATA_HOME` resolves to).
Fixes#13236.
Spec version 0.7 from https://standards.freedesktop.org/basedir-spec/basedir-spec-0.7.html
(latest as of this commit).
Three virtual methods are added to OS for the various XDG paths we will use:
- OS::get_data_path gives XDG_DATA_HOME, or if missing:
~/.local/share on X11, ~/Library/Application Support/ on macOS and %APPDATA% on Windows
- OS::get_config_path gives XDG_CONFIG_HOME, or if missing:
~/.config on X11, ~/Library/Application Support/ on macOS and %APPDATA% on Windows
- OS::get_cache_path gives XDG_CACHE_HOME, or if missing:
~/.cache on X11, ~/Library/Caches on macOS and %APPDATA% on Windows
So for Windows there are no changes, for Linux we follow the full split spec
and for macOS stuff will move from ~/.godot to ~/Library/Application Support/Godot.
Support for system-wide installation of templates on Unix was removed for now,
as it's a bit hackish and I don't think anyone uses it.
user:// will still be OS::get_data_path() + "/godot/app_userdata/$name" by
default, but when using the application/config/use_shared_user_dir option
it will now use XDG_DATA_HOME/$name, e.g. ~/.local/share/MyGame.
For now everything still goes in EditorSettings::get_settings_dir(), but
this will be changed in a later commit to make use of the new splitting
where relevant.
Part of #3513.
It had been missed in d09160a8b6 and broke compilation
for those platforms.
Took the opportunity to run clang-format on the code base to fix some corner cases
that went through our static tests/were overlooked recently.
Previously logging logic was scattered over OS class implementations
with plenty of duplication. Major changes in this commit:
- Extracted logging logic into a separate Logger hierarchy. It allows
easy configuration of logging mechanism depending on compile-time or
run-time configuration.
- Implemented RotatedFileLogger which is usually used with StdLogger,
providing persistency of logs. It is often important to be able to
obtain logs of the game even in production to be able to understand
what happened prior to some problem. On mobile there previously was
no way to obtain the logs aside from having the device connected to
your machine.
- flush() is not performed in release mode for every logged line. It
is only performed for errors.
Rename user facing methods and variables as well as the corresponding
C++ methods according to the folloming changes:
* pos -> position
* rot -> rotation
* loc -> location
C++ variables are left as is.
As it turns out older versions of the Android NDK have mntent.h but not
a complete implementation. If it did work it would most likely give the
wrong results on Android anyway.
This commit enables the UNIX drive discovery only for X11
We also missed '/run/media' (default for gnome desktops) in the list of
places to look for 'drives' on Linux. Add that to the list also.
This fixes#11270
In #10973 I reset the state of the stream in get_pos() assuming that the
ftell failing would cause proper error checking. This is not how this
class was designed, however. This commit fixes the get_8() method to
not return unitialized data on eof, and removes the wrong error resets
added in #10973.
This fixes#11022
- The Windows, UWP, Android (on Windows) and Linux builds are
tested with Scons 3.0 alpha using Python 3.
- OSX and iOS should hopefully work but are not tested since
I don't have a Mac.
- Builds using SCons 2.5 and Python 2 should not be impacted.
For every UNIX-derived (Android, Linux, macOS, iOS) flavor, a global counter is atomically incremented on thread start. That id is kept as thread-local storage.
Therefore, thread ids are sequential numbers, trivially comparable. This improves the previous state of things, in which `pthread_t` were casted to `Thread::ID` and unportabily compared. Also big, ugly thread ids appeared.
Implemented with `nanosleep()`. `usleep()` is deprecated.
Also loops to ensure that __at least__ the requested time is waited, accounting for spurious interruptions.
May help in situations like reattempting to connect to the debugger.
When looking up a symbol from a library, previously an error was
shown when the symbol did not exist. That caused confusion when the
lookup was completely optional.
This adds a new parameter to that method so that those errors can
be handled manually if needed.
This module was written by bojidar-bg and me, with the help of ClikCode and touilleMan.
This adds a module to Godot that enables the use of dynamic libraries as a source for scripts.
That also allows third party libraries to be linked to Godot more easily and without creating modules.
For a readme see https://github.com/GodotNativeTools/godot_headers/blob/master/README.md
I can show you the code
Pretty, with proper whitespace
Tell me, coder, now when did
You last write readable code?
I can open your eyes
Make you see your bad indent
Force you to respect the style
The core devs agreed upon
A whole new world
A new fantastic code format
A de facto standard
With some sugar
Enforced with clang-format
A whole new world
A dazzling style we all dreamed of
And when we read it through
It's crystal clear
That now we're in a whole new world of code
We should probably create a specific function for setting the
recv buffer anyway. UDP sockets does not need to bind (listen)
to be able to call recvfrom. This is especially useful for clients
who just call set_send_address and start communicating with a server.
- TCP:
- `listen` bind to wildcard "*" -> dual stack socket
- `listen` bind to address -> socket from address type
- `connect` -> resolve using best protocol (UNSPEC), socket from address type
- UDP:
- `listen` bind to wildcard "*" -> dual stack socket
- `listen` bind to address -> socket from address type
- `put_packet`/`put_var` -> resolve using TYPE_ANY (UNSPEC), socket from address type
(to change socket type you must first call `close` it)
The MinGW-w64 version we have on our Travis build environment (Ubuntu 12.04,
mingw-w64 2.0.1, gcc 4.6) is old and has some missing includes in the
dependencies of the `tcpmib.h` header [0] [1] [2].
Those were not triggered before 6323779596
probably due to conflicting WINVER definitions which prevented triggering the code
specific to >= 0x0600 (Vista). We ensure it won't be triggered by defining the
_WIN32_WINNT macro to Windows XP compatibility.
Passed as a compiler define to be sure it is always define before windows.h
is loaded. This means that Godot officially requires Vista API or later, it will
not work on Windows XP or earlier.
Also fix a bogus check for Windows 7 API.
-Changed SectionedPropertyEditor to support this
-Renamed Globals singleton to GlobalConfig, makes more sense.
-Changed the logic behind persisten global settings, instead of the persist checkbox, a revert button is now available
That year should bring the long-awaited OpenGL ES 3.0 compatible renderer
with state-of-the-art rendering techniques tuned to work as low as middle
end handheld devices - without compromising with the possibilities given
for higher end desktop games of course. Great times ahead for the Godot
community and the gamers that will play our games!
IP_Address changes:
- Converts to and from String transparently while handling IPv4 as IPv6
mapped (::ffff:[IP]) address internally.
- Completely remove AddrType enum.
- Setting/Getting of ip array is now only possible through dedicated functions
(ie. set_ipv4, get_ipv4, set_ipv6, get_ipv6)
- Add function to know if the address is a valid IPv4 (for IP implementation and enet)
PacketPeerUDP/StreamPeerTCP/TCP_Server now uses an instance variable
to store the selected ip_type (IPv4/IPv6/ANY, where ANY = dual stack).
All calls to resolve addresses, sending/receving data, connecting/listening
will use that socket type.
The reordering of the SConscript includes allows to ensure that
stuff like the builtin zlib headers will be available for libpng.
Also moved glew back into global env, otherwise windows seems
not to find it... Kind of shooting in the dark with this multi-env
setup.
- Add a proper function to retrieve IP addresses.
- Solve issues with Windows FileAccess and DirAccess to use the same code
for WinRT.
- Add patches to the GLES2 rasterizer to workaround ANGLE issues.
Can't create user data folder when project name has ``\ / : * ? " < > |`` characters on OS_Windows & OS_Unix.
So, change it to ``-`` to be able to make folder.
fixes#4928 and it's altanative to #4986.
volzhs
Wilson E. Alvarez
Juan Linietsky
Fabio Alessandrelli
Rémi Verschelde
Leon Krause
Marcelo Fernandez
luz.paz
Marcin Zawiejski
Max Hilbrunner
Pedro J. Estébanez
Daniele Giuliani
bruvzg
Blazej Floch
Gustav Lund
Robin Hübner
Hugo Locurcio
Poommetee Ketson
Hein-Pieter van Braam
Iskustvo
Artem Varaksa
Marlon Henry Schweigert
sambler
Emmanuel Leblond
Unknown
Ruslan Mustakov
Elia Argentieri
Ruslan Mustakov
letheed
supagu
Matthias Hoelzl
TwistedTwigleg
Indah Sylvia
Karroffel
David Carlier
Sergey Pusnei
eska
George Marques
Rémi Verschelde
Ariel Manzur
Johan Manuel
Daniel J. Ramirez
Aren Villanueva