-Physics servers test body motion use a class to hold parameters instead
of multiple arguments to make it more readable and flexible since there
are many options
-Improved documentation for test body motion and kinematic collision
-Removed read-only properties for body motion results (not handled in
scripts, so they should be get_ methods only instead)
Shape metadata was only used to get tile information when colliding with
tilemaps. It's not needed anymore since there's an API in tilemap using
body ids instead.
Allows 2D character controller to work without applying gravity when
touching the ground (also more safely in 3D), and collision detection
is more flexible with different safe margin values.
Character body motion changes in 2D and 3D:
-Recovery only for depth > min contact depth to help with collision
detection consistency (rest info could be lost if recovery was too much)
-Adaptive min contact depth (based on margin) instead of space parameter
Extra CharacterBody changes:
-2D: apply changes made in 3D for stop on slope and floor snap that help
fixing some jittering cases
-3D: fix minor inconsistencies in stop on slope and floor snap logic
RigidDynamicBody modes are replaced with several properties to make their
usage clearer:
-lock_rotation: disable body's rotation (instead of MODE_LOCKED)
-freeze: no gravity or forces (instead of MODE_STATIC and MODE_KINEMATIC)
-freeze_mode: Static (can be only teleported) or Kinematic (can be animated)
Also renamed MODE_DYNAMIC_LOCKED to MODE_DYNAMIC_LINEAR in the physics
servers.
Changes:
-Added support for custom inertia and center of mass in 3D
-Added support for custom center of mass in 2D
-Calculated center of mass from shapes in 2D (same as in 3D)
-Fixed mass properties calculation with disabled shapes in 2D/3D
-Removed first_integration which is not used in 2D and doesn't seem to
make a lot of sense (prevents omit_force_integration to work during the
first frame)
-Support for custom inertia on different axes for RigidBody3D
Instead of having a physics node named Static that can be either Static
or Kinematic, AnimatableBody is added again as a separate node:
-Inherited from StaticBody to make its usage clearer
-Still separated from CharacterBody to make its usage more focused
Properly implemented constant velocity for kinematic bodies in godot
physics servers (induced velocity without actually moving).
Also updated description for the different physics nodes to make their
usage clearer.
The default mask for queries was 0, 0x7FFFFFFF or 0xFFFFFFFF depending
on the cases.
Now always using 0xFFFFFFFF (in the form of UINT32_MAX to make it clear)
in order to use all layers by default.
Use a C++ callback instead of Callable for synchronizing physics nodes' state with physics servers.
Remove usage of PhysicsDirectBodyState in physics nodes when not
necessary.
Store PhysicsDirectBodyState for bodies individually instead of a
singleton to avoid issues when accessing direct body state for multiple
bodies.
PhysicsDirectBodyState is initialized only when needed, so it doesn't
have to be created when using the physics server directly.
Move PhysicsDirectBodyState2D and PhysicsDirectBodyState3D to separate
cpp files.
Make separation ray shapes work properly in move_and_slide, wihtout the
specific code in CharacterBody like before.
Now most of the logic is handled inside the physics server. The only
thing that's needed is to use ray shapes only for recovery and ignore
them when performing the motion itself (unless we're snapping or slips
on slope is on).
One-way collision is disabled for both rigid bodies and character
bodies.
Kinematic margin is now applied to ray shapes to help getting consistent
results in slopes and flat surfaces.
Convex shapes don't return inverted normals when a segment test starts
inside (raycasting will be made consistent in a separate patch).
Ray shapes also discard contacts when fully contained inside a shape
and when the contact direction is inverted, so the behavior is
consistent with all shape types. Now they always separate only when
intersecting the top of a shape (for downward rays).
Removing the + 1 in point gravity formula when using distance scale to
make it more accurate for standard gravitation.
Fixes precession in orbits for games using gravitation.
Also moved gravity calculation to area to use it for both rigid bodies
and soft bodies in 3D (same change in 2D for consistency).
Co-authored-by: Ryan Peach <ryan.peach@keysight.com>
Changes:
- Rename few methods/property and group them in the editor when it's possible
- Make MotionResult API consistency with KinematicCollision
- Return a boolean in move_and_slide if there was a collision
- New methods:
- get_floor_angle on CharacterBody to get the floor angle.
- get_angle on KinematicCollision to get the collision angle.
- get_last_slide_collision to quickly get the latest collision of move_and_slide.
Infinite inertia:
Not needed anymore, since it's now possible to set one-directional
collision layers in order for characters to ignore rigid bodies, while
rigid bodies still collide with characters.
Ray shapes:
They were introduced as a work around to allow constant speed on slopes,
which is now possible with the new property in CharacterBody instead.
Same thing that was already done in 2D, applies moving platform motion
by using a call to move_and_collide that excludes the platform itself,
instead of making it part of the body motion.
Helps with handling walls and slopes correctly when the character walks
on the moving platform.
Also made some minor adjustments to the 2D version and documentation.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
When synchronizing CharacterBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
The Transform::xform and xform_inv are made safe for Planes when using non-uniform scaling.
Optimization of calling sites to prevent loss of performance from the changes to xform(Plane).
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
The `Math_INF` and `Math_NAN` defines were just aliases for those
constants, so we might as well use them directly.
Some portions of the code were already using `INFINITY` directly.
Check for each body individually if it collides with the other one or
ignores it.
When a body is being ignored, the other body's mass is considered
infinite when applying impulses to avoid extra overlapping.
Disabled backface collision is only applied on face separation axes,
because applying it also on edges and vertices was causing some contacts
to be wrongly disabled and contact points to be off.
More accurate unsafe motion calculation
* Safe and unsafe motion are calculated by dichotomy with a limited
number of steps. It's good for performance, but on long motions that
either collide near the beginning or near the end, the result can be
very imprecise.
* Now a factor 0.25 or 0.75 is used to converge faster when this case
happens, which allows longer motions to get more accurate collision
detection.
* Makes snap collision more precise, and helps with cases where diagonal collision on the border of a platform can lead to the character being stuck.
Additional improvements to move_and_slide:
* Handle slide canceling in move_and_collide with 0 velocity instead of
not applying it.
* Better handling of snap with custom logic to cancel sliding.
* Remove small jittering when using stop on slope, by canceling the
motion completely when the resulting motion is less than margin instead
of always projecting to the up direction (in both body motion and snap).
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
In 3D, disabled shapes are now not added to the broadphase anymore.
Since they are removed right away when disabled, no need to check for
disabled shapes for any query that comes from the broadphase.
Also Fixes raycast queries returning disabled shapes.
In 2D, disabled shapes where already not added to the broadphase.
Remove the same unnecessary checks as in 3D.
Overall harmonized API for disabled shapes in the physics servers and
removed duplicate method.
* RingBuffer had no reason to be in this context
* A single buffer is used that can grow as much as the game needs.
This should make thread loading entirely reliable.
Safe margin property on CharacterBody only, used as argument in
move_and_collide.
Removed kinematic_safe_margin in 3D physics server, not really useful
and now harmonized with 2D.
MODE_DYNAMIC instead of MODE_RIGID
MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER
No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED
(MODE_CHARACTER was forcing the body not to sleep, which is redundant
with can_sleep and wasn't done in Bullet).
The code is based on the current version of thirdparty/vhacd and modified to use Godot's types and code style.
Additional changes:
- extended PagedAllocator to allow leaked objects
- applied patch from https://github.com/bulletphysics/bullet3/pull/3037
Port lawnjelly's dynamic BVH implementation from 3.x to be used in
both 2D and 3D broadphases.
Removed alternative broadphase implementations which are not meant to be
used anymore since they are much slower.
Includes changes in Rect2, Vector2, Vector3 that help with the template
implementation of the dynamic BVH by uniformizing the interface between
2D and 3D math.
Co-authored-by: lawnjelly <lawnjelly@gmail.com>
Use ThreadWorkPool to process physics step tasks in multiple threads. Collisions are all processed in parallel and solving impulses is
processed in parallel for rigid body islands.
Additional changes:
- Proper islands for soft bodies linked to active bodies
- All moving areas are on separate islands (can be parallelized)
- Fix inconsistencies with body islands (Kinematic bodies could link
bodies together or not depending on the processing order)
- Completely prevent static bodies to be active (it could cause islands
to be wrongly created and cause dangerous multi-threading operations as
well as inconsistencies in created islands)
- Apply impulses only on dynamic bodies to avoid unsafe multi-threaded
operations (static bodies can be on multiple islands)
- Removed inverted iterations when populating body islands, it's now
faster in regular order (maybe after fixing inconsistencies)
Several optimizations in the way solver islands are processed in both
2D and 3D physics:
- Use LocalVector instead of linked list to avoid cache misses (with
persistent storage based on worst case scenario)
- Remove pairs when setup fails (no valid contact) to avoid unnecessary
solving of non-colliding rigid bodies just to return immediately
The moment of inertia calculation for BoxShape is:
```
Vector3(
(p_mass / 3.0) * (ly * ly + lz * lz),
(p_mass / 3.0) * (lx * lx + lz * lz),
(p_mass / 3.0) * (lx * lx + ly * ly));
```
where the final line includes both the x and y extents.
However, for CapsuleShape3D, CylinderShape3D, ConvexPolygonShape3D, ConcavePolygonShape3D, and HeightMapShape3D, the final line read `(p_mass / 3.0) * (extents.y * extents.y + extents.y * extents.y)`. I believe this is a mistake, considering the comment in each case mentions using an AABB approximation, which should follow the same approach as BoxShape.
This change corrects the final line to include both the x and y components of the shape's extent.
Rémi Verschelde
PouleyKetchoupp
Haoyu Qiu
Lightning_A
Hugo Locurcio
Daniel
fabriceci
Anilforextra
Aaron Franke
qarmin
Juan Linietsky
Fabio Alessandrelli
Jeffrey Cochran
LoipesMas
lawnjelly
luz paz
Marcel Admiraal
Rémi Verschelde
Arkadiusz Marcin Kołek
Morris Tabor
rafallus
Josh Jones