Commit Graph

174 Commits

Author SHA1 Message Date
Hugo Locurcio aea104deb7
Remove unused `shadow_color` property from Light3D
This shadow color property was no longer effective since the shaders
were optimized to improve occupancy.
2022-03-04 23:12:18 +01:00
Rémi Verschelde 3078b92dff
Merge pull request #58512 from Calinou/light3d-add-distance-fade 2022-03-04 12:26:29 +01:00
Hugo Locurcio 83efe4d8b0
Fix typo in SSR roughness quality enum value names 2022-02-28 01:06:26 +01:00
Hugo Locurcio b1a295b739
Implement distance fade properties in OmniLight3D and SpotLight3D
This can be used to fade lights and their shadows in the distance,
similar to Decal nodes. This can bring significant performance
improvements, especially for lights with shadows enabled and when
using higher-than-default shadow quality settings.

While lights can be smoothly faded out over distance, shadows are
currently "all or nothing" since per-light shadow color is no longer
customizable in the Vulkan renderer. This may result in noticeable
pop-in when leaving the shadow cutoff distance, but depending on the
scene, it may not always be that noticeable.
2022-02-25 15:17:35 +01:00
Bastiaan Olij a78a9fee71 Implementing OpenXR driver 2022-02-23 12:02:24 +01:00
clayjohn fe49244611 Use Filament specular models and parametrization 2022-02-22 19:39:41 -08:00
Rémi Verschelde e1b8a86b2b
Merge pull request #58177 from clayjohn/VULKAN-prefiltered-radiance 2022-02-17 17:53:42 +01:00
clayjohn 48728a79b6 Use prefiltered radiance 2022-02-16 21:37:18 -08:00
Rémi Verschelde b8b4580448
Style: Cleanup single-line blocks, semicolons, dead code
Remove currently unused implementation of TextureBasisU, could be re-added
later on if needed and ported.
2022-02-16 14:06:29 +01:00
Rémi Verschelde d2fa379f2b
Merge pull request #54158 from Calinou/decrease-default-soft-shadow-quality 2022-02-10 17:38:24 +01:00
Rémi Verschelde 7332aff3fd
Merge pull request #54677 from Calinou/voxelgi-default-low-quality 2022-02-10 17:35:52 +01:00
Rémi Verschelde c6199da8b8
Merge pull request #39965 from Calinou/tweak-sdfgi-defaults 2022-02-10 17:31:54 +01:00
reduz db43237c78 Fix BLEND_SHAPE_MASK
* Should now be correct
* Supersedes 53738
2022-02-08 13:50:01 +01:00
Hugo Locurcio 7721e19ccc
Tweak default SDFGI settings for better quality
- Enable Read Sky Light to get proper outdoors lighting out of the box.
- Set bounce feedback to 0.5 by default to get a better quality result.
  - Higher values may cause infinite feedback with bright surfaces.
- Increase the number of frames to converge to improve quality
  at the cost of latency. Most scenes are fairly static after all.
- Use 75% Y scale by default as most scenes are not highly vertical.

- Reorder the Y scale enum to go from the lowest Y scale to the highest.
  Also rename the "Disabled" setting to "100%" for clarity.
2022-02-06 15:28:59 +01:00
Rémi Verschelde 58324f4df8
Merge pull request #54574 from Ansraer/glow_map 2022-01-26 13:39:51 +01:00
Omar Polo bd448e5535 Rename or refactor macros to avoid leading underscores
These are not used consistently and some can conflict with
system-specific defines.  While here, also delete some unused macros.
2022-01-20 20:29:15 +01:00
Rémi Verschelde 7e3b92f81f
Merge pull request #55360 from Calinou/rename-bake-mode-properties 2022-01-20 17:35:32 +01:00
Ansraer 90652b1755 add support for glow maps 2022-01-20 16:47:25 +01:00
Rémi Verschelde cba2fd2e80
Revert "Add new scaling modes for splash screen"
This reverts commit fcc9f5ce39.

The feature is good but the implementation still needs more work.
A new PR will be made with a rework of this commit.
2022-01-19 16:09:52 +01:00
Samuel Pedrajas fcc9f5ce39
Add new scaling modes for splash screen
Removes the `fullsize` option which is superseded by `stretch_mode`.

Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
2022-01-18 23:29:11 +01:00
Rémi Verschelde 01eefa2c50
Merge pull request #56761 from Calinou/sdfgi-allow-any-number-of-cascades 2022-01-18 16:21:39 +01:00
Hugo Locurcio 2dc7b03a82
Allow using between 1 and 8 cascades for SDFGI
This provides more flexibility between performance and quality
adjustments, especially when using SDFGI for small-scale levels
(which can be useful for procedurally generated scenes).
2022-01-17 16:49:02 +01:00
Hugo Locurcio 40be15920f
Remove support for PVRTC texture encoding and decoding
On the only platform where PVRTC is supported (iOS),
ETC2 generally supersedes PVRTC in every possible way. The increased
memory usage is not really a problem thanks to modern iOS' devices
processing power being higher than its Android counterparts.
2022-01-14 21:08:22 +01:00
Yuri Roubinsky 422f7b280f Optimize include files to improve `shader_language.h` compilation speed 2022-01-12 14:19:12 +03:00
Rémi Verschelde 9e97262132
Merge pull request #56170 from Calinou/renderingserver-expose-gi-half-resolution 2022-01-07 00:05:43 +01:00
Hugo Locurcio 221efffdf7
Expose RenderingServer SSIL quality setter methods
This allows changing SSIL quality at run-time in a project.
2022-01-06 02:35:49 +01:00
Fernando Cosentino ca79373d13
Added material_overlay property to MeshInstance3D
Applying overlay materials into multi-surface meshes currently
requires adding a next pass material to all the surfaces, which
might be cumbersome when the material is to be applied to a range
of different geometries. This also makes it not trivial to use
AnimationPlayer to control the material in case of visual effects.
The material_override property is not an option as it works
replacing the active material for the surfaces, not adding a new pass.

This commit adds the material_overlay property to GeometryInstance3D
(and therefore MeshInstance3D), having the same reach as
material_override (that is, all surfaces) but adding a new material
pass on top of the active materials, instead of replacing them.
2022-01-05 11:47:51 +01:00
Rémi Verschelde 095c72b03e
Merge pull request #55790 from Calinou/renderingserver-add-device-type-getter
Add `RenderingServer.get_video_adapter_type()` method
2022-01-04 16:43:23 +01:00
Rémi Verschelde 851fb16350
Merge pull request #56305 from Calinou/rename-lod-threshold 2022-01-04 15:28:06 +01:00
Rémi Verschelde ff211c8e5a
Merge pull request #55386 from Calinou/allow-disable-depth-prepass 2022-01-04 15:25:11 +01:00
Rémi Verschelde 7f66c16c03
Merge pull request #51206 from clayjohn/Vulkan-ASSGI 2022-01-04 10:00:17 +01:00
Rémi Verschelde fe52458154
Update copyright statements to 2022
Happy new year to the wonderful Godot community!
2022-01-03 21:27:34 +01:00
Hugo Locurcio df09bc38cb
Rename Lod Threshold to Mesh Lod Threshold
This makes it more obvious that the setting only affects mesh LOD,
not manual (H)LOD achieved using visibility ranges.
2021-12-29 00:11:50 +01:00
Hugo Locurcio bf339842a5
Expose RenderingServer GI half resolution setter method
This is required for projects to be able to change the
GI half-resolution setting at run-time.
2021-12-22 19:38:48 +01:00
Hugo Locurcio e962900f23
Rename and reorder bake mode properties for consistency
The order now goes from least to most computationally expensive:

- Disabled
- Static
- Dynamic
2021-12-14 12:01:12 +01:00
Hugo Locurcio b3174e7af9
Add `RenderingServer.get_video_adapter_type()` method
This can be used to distinguish between integrated, dedicated, virtual
and software-emulated GPUs. This in turn can be used to automatically
adjust graphics settings, or warn users about features that may run
slowly on their hardware.
2021-12-10 17:10:47 +01:00
Rémi Verschelde 46d384060e
Merge pull request #35901 from nathanfranke/pool-byte-array-subarray-exclusive 2021-12-07 14:00:59 +01:00
Silc 'Tokage' Renew ca2b7a87a5 Fixed minimum size of aabb in ImmediateMesh to draw only one vertex 2021-12-02 08:33:33 +09:00
Hugo Locurcio 989a7d9270
Allow disabling the depth prepass in the Vulkan Clustered backend
In scenes that have little to no overdraw, disabling the depth prepass
can give a small performance boost. Nonetheless, in most other scenarios,
the depth prepass should be left enabled as it improves performance
significantly.
2021-11-27 17:54:45 +01:00
Nathan Franke dd30253cdc
PackedByteArray, Array slice end exclusive, rename subarray to slice 2021-11-26 22:13:12 -06:00
Je06jm 20deb0917d Implemented AMD's FSR as a computer shader for upscaling 3D scenes 2021-11-23 14:16:03 -07:00
Yuri Roubinsky 826e781bfa Fix default_texture_param in shader pipeline to support uniform arrays 2021-11-12 12:53:40 +03:00
clayjohn 0eff109a21 Added SSIL post processing effect 2021-11-06 12:43:19 -07:00
Hugo Locurcio 91aa7cf1da
Decrease the default VoxelGI quality to improve performance
On a GeForce GTX 1080 in 2002×1447 resolution, decreasing VoxelGI quality
from High to Low quality saves 1.2 ms of GPU time in a medium-sized
test scene. This only results in a minor drop in quality.
2021-11-06 19:40:52 +01:00
Brian Semrau ac24070056 Use Callable in RS::request_frame_drawn_callback 2021-11-05 01:59:38 -04:00
Clay John 8a10bb7d0d
Use OpenGL 3.3 core profile instead of compatibility profile
- Rename OpenGL to GLES3 in the source code per community feedback.
  - The renderer is still exposed as "OpenGL 3" to the user.
- Hide renderer selection dropdown until OpenGL support is more mature.
  - The renderer can still be changed in the Project Settings or using
    the `--rendering-driver opengl` command line argument.
- Remove commented out exporter code.
- Remove some OpenGL/DisplayServer-related debugging prints.
2021-10-31 15:56:45 +01:00
clayjohn 1b2cd9f251 Addition of FogVolumes, FogShaders, FogMaterial, and overhaul of VolumetricFog
Co-authored-by: Brian Semrau <brian.semrau@gmail.com>
2021-10-28 22:02:23 -07:00
JFonS c571e4a7f4 Implement distance fade and transparency
The built-in ALPHA in spatial shaders comes pre-set with a per-instance
transparency value. Multiply by it if you want to keep it.

The transparency value of any given GeometryInstance3D is affected by:
   - Its new "transparency" property.
   - Its own visiblity range when the new "visibility_range_fade_mode"
     property is set to "Self".
   - Its parent visibility range when the parent's fade mode is
     set to "Dependencies".

The "Self" mode will fade-out the instance when reaching the visibility
range limits, while the "Dependencies" mode will fade-in its
dependencies.

Per-instance transparency is only implemented in the forward clustered
renderer, support for mobile should be added in the future.

Co-authored-by: reduz <reduzio@gmail.com>
2021-10-25 11:39:34 +02:00
Hugo Locurcio 970bed62ab
Decrease the default soft shadow quality to improve performance
Soft shadows are relatively expensive to filter. However, with the
default blur factors, it's not needed to use too many samples
(unless PCSS-like shadows are used with a large size). Textures
and screen-space antialiasing can also be used to mask the noise
pattern effectively.

On a GeForce GTX 1080, going from Medium to Low for both shadow types
saves 0.2-0.4 ms of GPU time per frame in 2560×1440 resolution.
This can translate to significantly higher savings on lower-end GPUs.

Given how the shader works, this improves rendering performance
even if lights with shadows are never used.
2021-10-23 16:32:38 +02:00
Rémi Verschelde 3bebbcacdb
Merge pull request #53992 from Calinou/hard-shadow-mapping-allow-dithering 2021-10-22 19:34:09 +02:00