_has_property_default_value is a required virtual
for ScriptExtension but it was not bound, and could
therefore not be implemented
this made it impossible to implement a ScriptExtension
that runs
This was a regression from 4469144891
The callback should be called, not only be called when the refcount
reaches 0. For example, the C# callback needs to know when the
refcount reaches 1, in order to swap to a weak GC handle.
The function tried to rearrange properties but that lead to problems with duplication or deleted properties. Implemented the logic that that function did inside the get_property_list both for tool scripts and non-tool scripts.
- Add `positive_only` property hint to disallow using negative presets.
These values are clamped in several places in the editor already,
so this avoids displaying presets that don't work.
- Move the Zero preset at the end of the positive list to match
the custom property editor. It's also used less often than Linear,
Ease In and Ease Out.
- Rename presets to be consistent between the easing property editor
and custom property editor.
- Remove unused `inout` hint which was redundant since it was already
the default.
- RPC configurations are now dictionaries.
- Script.get_rpc_methods renamed to Script.get_rpc_config.
- Node.rpc[_id] and Callable.rpc now return an Error.
- Refactor MultiplayerAPI to allow extension.
- New MultiplayerAPI.rpc method with Array argument (for scripts).
- Move the default MultiplayerAPI implementation to a module.
Implement built-in classes Vector4, Vector4i and Projection.
* Two versions of Vector4 (float and integer).
* A Projection class, which is a 4x4 matrix specialized in projection types.
These types have been requested for a long time, but given they were very corner case they were not added before.
Because in Godot 4, reimplementing parts of the rendering engine is now possible, access to these types (heavily used by the rendering code) becomes a necessity.
**Q**: Why Projection and not Matrix4?
**A**: Godot does not use Matrix2, Matrix3, Matrix4x3, etc. naming convention because, within the engine, these types always have a *purpose*. As such, Godot names them: Transform2D, Transform3D or Basis. In this case, this 4x4 matrix is _always_ used as a _Projection_, hence the naming.
This PR implements a worked thread pool. It uses a fixed amount of threads in a pool and allows scheduling tasks
that can be run on threads (and then waited for). It satisfies the following use cases:
* HTML5 thread count is fixed (and similar restrictions are known in consoles) so we need to reuse threads.
* Thread spawning is slow in general, so reusing threads is faster anyway.
* This implementation supports recursive waiting for tasks, making it less prone to deadlocks if threads from the pool also run tasks.
After this is approved and merged, subsequent PRs will be needed to replace the ThreadWorkPool usage by this class.
This PR is a continuation of #50381 (which was implemented exactly a year ago!)
* Add a visual interface to select which classes should not be built into Godot (well, they are built if something else uses them, but if not used the optimizer will remove them out).
* Add a detection system to scan the project and figure out the actual classes used.
* Added the ability for SCons to load build profiles.
Obligatory Screen:
A simple test with a couple of nodes in the scene resulted in a 25% reduction for the final binary size
TODO:
* Script languages need to implement used class detection (left for another PR).
* Options to disable servers or server functionalities (like 2D or 3D physics, navigation, etc). Are missing, that should also greatly aid in reducing binary size.
* Options to disable some modules would be desired.
* More options to disable drivers (OpenGL, Vulkan, etc) would be desired.
In general this PR is a starting point for more contributors to improve and enhance this functionality.
For this to work safely (user not call queue_free or something in the expression), a const call mode was added to Object and Variant (and optionally Script).
This mode ensures only const functions can be called, making it safe to use from the editor.
Co-Authored-By: reduz <reduzio@gmail.com>
This PR implements:
* A new hint: PROPERTY_HINT_NODE_TYPE for variant type OBJECT, which can take specific node types as hint string.
* The editor will show it as a node path, but will set it as a pointer to a node from the current scene if you select a path.
* When scene is saved, the node path is saved, then restored as a pointer.
NOTE: This is a proof of concept and this approach will most likely not work. The reason if that, if the node referenced is deleted, then when trying to edit this the node will become invalid.
Potential workarounds: Since this uses the Variant API, it should obtain the pointer from the Variant object ID. Yet, this would either only really work in GDScript or it would need to be implemented with workarounds in every language.
Alternative ways to make this work: Nodes could export an additional property with a node path (like for which_node, it could be which_node_path).
Another alternative: Path editing could happen as a hidden metadata (ignoring the pointer).
* Allows running the game in "movie writer" mode.
* It ensures entirely stable framerate, so your run can be saved stable and with proper sound (which is impossible if your CPU/GPU can't sustain doing this in real-time).
* If disabling vsync, it can save movies faster than the game is run, but if you want to control the interaction it can get difficult.
* Implements a simple, default MJPEG writer.
This new features has two main use cases, which have high demand:
* Saving game videos in high quality and ensuring the frame rate is *completely* stable, always.
* Using Godot as a tool to make movies and animations (which is ideal if you want interaction, or creating them procedurally. No other software is as good for this).
**Note**: This feature **IS NOT** for capturing real-time footage. Use something like OBS, SimpleScreenRecorder or FRAPS to achieve that, as they do a much better job at intercepting the compositor than Godot can probably do using Vulkan or OpenGL natively. If your game runs near real-time when capturing, you can still use this feature but it will play no sound (sound will be saved directly).
Usage:
$ godot --write-movie movie.avi [scene_file.tscn]
Missing:
* Options for configuring video writing via GLOBAL_DEF
* UI Menu for launching with this mode from the editor.
* Add to list of command line options.
* Add a feature tag to override configurations when movie writing (fantastic for saving videos with highest quality settings).
Clean up and do fixes to hash functions and newly introduced murmur3 hashes in #61934
* Clean up usage of murmur3
* Fixed usages of binary murmur3 on floats (this is invalid)
* Changed DJB2 to use xor (which seems to be better)
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
Adds a new, cleaned up, HashMap implementation.
* Uses Robin Hood Hashing (https://en.wikipedia.org/wiki/Hash_table#Robin_Hood_hashing).
* Keeps elements in a double linked list for simpler, ordered, iteration.
* Allows keeping iterators for later use in removal (Unlike Map<>, it does not do much
for performance vs keeping the key, but helps replace old code).
* Uses a more modern C++ iterator API, deprecates the old one.
* Supports custom allocator (in case there is a wish to use a paged one).
This class aims to unify all the associative template usage and replace it by this one:
* Map<> (whereas key order does not matter, which is 99% of cases)
* HashMap<>
* OrderedHashMap<>
* OAHashMap<>
Implemented by request of @neikeq to advance in the GDExtension version of Mono.
* If a Resource type is missing upon load, it will be remembered together with its data (Unless manually overriden).
* If a Node type is missing upon load, it will be also be remembered together with its data (unless deleted).
This feature makes working with GDExtension much easier, as it ensures that missing types no longer cause data loss.
These typedefs don't save much typing compared to the full `Ref<Resource>`
and `Ref<RefCounted>`, yet they sometimes introduce confusion among
new contributors.
Type emit_signal exposed method return type
set UndoRedo add_do_method and add_undo_method exposed return void
Set TreeItem::_call_recursive_bind returns void
Set _rpc_bind and _rpc_id_bind returns void in Node
Set _call_group and _call_group_flags method returns void in SceneTree
Set godot-cpp-test CI flag to false
* Ability to create script languages from GDExtension
* Some additions to gdnative_extension.h to make this happen
* Moved the GDExtension binder to core
This now allows creating scripting languages from GDExtension, with the same ease as if it was a module. It replaces the old PluginScript from Godot 3.x.
Warning: GodotCPP will need to be updated to support this (it may be a bit of work as ScriptInstance needs to be created over there again).
We might want to re-add something like this if/when we find a good use case
for it and do the effort to categorize all objects in the API properly.
Until then, it's better to remove that boilerplate since it's not needed.
Closes#18711.
* API kept the same (Although functions could be renamed to set_metadata/get_metadata in a later PR), so not much should change.
* Metadata now exposed as individual properties.
* Properties are editable in inspector (unless metadata name begins with _) under the metadata/ namespace.
* Added the ability to Add/Remove metadata properties to the inspector.
This is a functionality that was requested very often, that makes metadata work a bit more similar to custom properties in Blender.
* Based on the work done for Variant in the past.
* Added `ClassDB::bind_static_method`
* Cleaned up ClassDB::bind_method to use variadic templates.
This adds support for having static methods in Object derived classes.
Note that this does not make it work yet in GDScript or Mono and, while it works for GDExtension, GodotCPP needs to be updated.
* Allows creating a GDExtension based 3D Physics Server (for Bullet, PhysX, etc. support)
* Some changes on native struct binding for PhysicsServer
This allows a 3D Physics server created entirely from GDExtension. Once it works, the idea is to port the 2D one to it.
* Previous "virtual" classes (which can't be instantiated) are not corretly named "abstract".
* Added a new "virtual" category for classes, they can't be instantiated from the editor, but can be inherited from script and extensions.
* Converted a large amount of classes from "abstract" to "virtual" where it makes sense.
Most classes that make sense have been converted. Missing:
* Physics servers
* VideoStream
* Script* classes.
which will go in a separate PR due to the complexity involved.
* Very old macros from the time Godot was created.
* Limited arguments to 5 (then later changed to 8) in many places.
* They were replaced by C++11 Variadic Templates.
* Renamed methods that take argument pointers to have a "p" suffix. This was used in some places and not in others, so made it standard.
* Also added a dereference check for Variant*. Helped catch a couple of bugs.
Add localizable string (Dictionary<Lang Code, String>) property editor and property hint.
Add localized "app name" property to the project settings.
Add localized permission and copyright properties to the macOS and iOS export settings.
Remove some duplicated ("app name") and deprecated ("info") macOS and iOS export properties.
Each file in Godot has had multiple contributors who co-authored it over the
years, and the information of who was the original person to create that file
is not very relevant, especially when used so inconsistently.
`git blame` is a much better way to know who initially authored or later
modified a given chunk of code, and most IDEs now have good integration to
show this information.
Auto-instantiation is used by the create dialog, but should also be
used by the editor inspector.
This refactors object properties auto-instantiation into a dedicated
method to be reused throughout editor (and possibly scripting).
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
Extension class properties that have been registered with
ClassDB(`GDNativeInterface::classdb_register_extension_class_property`)
were not fetched previously. (Only directly providing a property
list using `GDNativeExtensionClassCreationInfo::get_property_list_func`
would work.) This especially caused problems with the C++
bindings since they exclusively rely on ClassDB to register properties.
Calling the constructor alone is not enough if the class to be
instantiated is not a base class.
This commit adds two functions, one for retrieving the the extension
class reference, the other to construct an instance using the
constructor and the extension class reference.
Move multiplayer classes to "core/multiplayer" subdir.
Move the RPCConfig and enums (TransferMode, RPCMode) to a separate
file (multiplayer.h), and bind them to the global namespace.
Move the RPC handling code to its own class (RPCManager).
Renames "get_rpc_sender_id" to "get_remote_sender_id".
There are two ways a class can be added to ClassDB:
- `A`: When an instance of the class is created for the first time. When
this happends the class is not registered/exposed to scripts.
- `B`: When calling `GDREGISTER_CLASS(ClassName)` or similar. When this
happens the class is registered/exposed to scripts.
ClassDB has an API type property to differentiate between the core
and editor APIs. Up until now the API type was determined whenever
the class is added to ClassDB (either `A` or `B`).
The problem comes when a class is instantiated (`A`) before
being registered (`B`).
If at this point the current defined API is not the same as when the
class is later registered, this will result in a mismatch between
`--editor` and non-editor apps.
This is specially bad for C# as it makes the editor player abort.
This was happening with `EditorPaths` which, while being registered
during the editor API classes registrations, it was also being
instantiated earlier when running the editor or the project manager,
via a call to `EditorPaths::create()`. This regression was introduced
in 1074017f04.
This commit fixes this simply by re-assigning the class API type when
the class is registered (`B`).
This is correct because API type describes registered/exposed classes.
It shouldn't cause any regressions as the API type should not be
accessed of classes that are not (or not yet) registered/exposed.
Code locations for reference:
- Method to add a class to ClassDB: `ClassDB::_add_class2`
- Code that adds classes to ClassDB post first initialization (`A`):
`memnew` macros -> `Object::_postinitialize` ->
`Object::initialize_class` -> `ClassDB::_add_class2`.
- Code adds class to ClassDB and registers/exposes it to scripts:
`GDREGISTER_CLASS` macros -> `ClassDB::register_class<T>` ->
`Object::initialize_class` -> `ClassDB::_add_class2`.
Adds ability to add error return documetation to the binder and class reference.
Usage example:
```C++
void MyClass::_bind_method() {
[..]
BIND_METHOD_ERR_RETURN_DOC("load", ERR_FILE_CANT_OPEN, ERR_FILE_UNRECOGNIZED);
}
```
One function of ConfigFile was changed as example.
* Allows calling into native extensions directly with a pointer
* Makes it easier to implement some APIs more efficiently
* Appears with a "*" in the documentation for the argument.
* Implementing the pointer handling is entirely up to the implementation, although the extension API provides some hint.
* AudioStream has been implemented as an example, allowing to create NativeExtension based AudioStreams.
* `_gui_input`, `_input`, `_unhandled_input` and `_unhandled_key_input` are now regular C++ virutal functions.
* Everything else converted to GDVIRTUAL
* BIND_VMETHOD is gone, always use the new syntax from now on.
Creating `_gui_input` method and using the binder to register events will no longer work, simply override the virtual function now.
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
Capsule height and radius setters can modify each other, rather than
using clamping, to avoid cases where values are not set correctly when
loading a scene (depending on the order of properties).
Inspector undo/redo:
Added the possibility to link properties together in the editor, so
they can be undone together, for cases where a property can modify
another one.
Gizmo undo/redo:
Capsule handles pass both radius and height values so they can be undone
together.
* Make Undo/Redo menu items disabled when clicking it does nothing.
* Context menu of `TextEdit`
* Context menu of `LineEdit`
* Editor's Scene menu
* Script editor's Edit menu and context menu (for Script and Text)
* Make editor undo/redo log messages translatable.
* Mark `UndoRedo`'s `has_{un,re}do()` methods as `const`.
* Expose `TextEdit`'s `has_{un,re}do()` to scripts since `{un,re}do()` are already available.
This sends the Godot object instance back to the extension so they can
keep a pointer for function calls.
Incidentally fix argument order on instance bindings callback for free()
* Most resource types now have unique identifiers.
* Applies to text, binary and imported resources.
* File formats reference both by text and UID (when available). UID always has priority.
* Resource UIDs are 64 bits for better compatibility with the engine.
* Can be represented and used textually, example `uuid://dapwmgsmnl28u`.
* A special binary cache file is used and exported, containing the mappings.
Example of how it looks:
```GDScript
[gd_scene load_steps=2 format=3 uid="uid://dw86wq31afig2"]
[ext_resource type="PackedScene" uid="uid://bt36ojelx8q6c" path="res://subscene.scn" id="1_t56hs"]
```
GDScript, shaders and other special resource files can't currently provide UIDs, but this should be doable with special keywords on the files.
This will be reserved for future PRs.
The various get_meta, set_meta, has_meta, get_meta_list, remove_meta
functions now uses StringName, allowing further optimizations via the
SNAME macro when used from C++ (this PR does not change the various
usage though).
* Added explicit return type to the SNAME macro.
* Add some extra SNAME usages.
* Change some ClassDB methods to use const StringName & arguments.
* Cache the Window parent in Control because it's used in
is_layout_rtl(), which is called often.
* Only enable internal processing for viewports that need it.
* Change CanvasItem::group to be a StringName because it's only used as
that.
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
* This PR adds the ability to disable classes when building.
* For now it's only possible to do this via command like:
`scons disable_classes=RayCast2D,Area3D`
* Eventually, a proper UI will be implemented to create a build config file to do this at large scale, as well as detect what is used in the project.
* The harcoded 8 slots are no more and impose limits in the new extension system.
* New system is limitless, although it will impose small performance hit with a mutex.
* Use a token to request the instance binding.
**Warning**: Mono will most likely break as a result of this, will need to be modified to use the new system.
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
* Deprecates GDNative in favor of a simpler, lower level interface.
* New extension system allows registering core engine classes.
* Simple header interface in gdnative_interace.h
In this PR:
- Removed rset
- rpc_config can now optionally configure transfer mode
(reliable/unreliable/ordered) and channel (channels are not actually
implemented yet.)
- Refactor how the RPC id is computed to minimize the logic in Node and
scripts that now only needs a single `get_rpc_methods` function.
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
* Properly exposed, including validated and variant call
* Bound static functions in String and Color
* Did not add support for scripting languages, will have to be added manually.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
- Based on C++14's `shared_time_mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
As a bonus, to have consistency between use Beziers and create insert tracks, use Beziers also gets a default via editor settings that is used when the confirmation dialog is disabled, instead of just falling back to creating non-Bezier tracks.
Alternative to `_change_notify()` to be called from within C++ classes.
Achieves low-level consistency with scripting, where this method is
exposed for updating the editor (inspector) with new values.
- ClassDoc added to GDScript and property reflection data were extracted
from parse tree
- GDScript comments are collected from tokenizer for documentation and
applied to the ClassDoc by the GDScript compiler
- private docs were excluded (name with underscore prefix and doesn't
have any doc comments)
- default values (of non exported vars), arguments are extraced from the
parser
- Integrated with GDScript 2.0 and new enums were added.
- merge conflicts fixed
ptrcall is now also used to optimize calls in GDScript, on top of the existing
use by the GDNative and Mono modules.
It no longer makes sense to make it optional.
Rémi Verschelde
Yuri Sizov
derammo
Yuri Sizov
Ignacio Roldán Etcheverry
Hristo Stamenov
reduz
Hugo Locurcio
Fabio Alessandrelli
kobewi
Jan Haller
K. S. Ernest (iFire) Lee
Marcus Elg
bruvzg
Yuri Rubinsky
George Marques
Rémi Verschelde
Eric M
Pierre-Thomas Meisels
Ing. Petr Jindra
Haoyu Qiu
jmb462
Anilforextra
Nathan Franke
Marc Gilleron
fabriceci
Andrii Doroshenko (Xrayez)
Nathan Franke
Gilles Roudière
Ricardo Subtil
Lightning_A
Xwdit
Max Hilbrunner
qarmin
CaptainProton42
Maxime Lapointe
Max Hilbrunner
Silc 'Tokage' Renew
PouleyKetchoupp
Aaron Franke
Joan Fons
Francois Belair
Bastiaan Olij
Pedro J. Estébanez
Paulb23
Shatur95
Anshul7sp1
Maganty Rushyendra
Marcel Admiraal
Emmanuel Leblond
Thakee Nathees
Rafał Mikrut