- Fix objects with no material being considered as fully transparent by the lightmapper.
- Added "environment_min_light" property: gives artistic control over the shadow color.
- Fixed "Custom Color" environment mode, it was ignored before.
- Added "interior" property to BakedLightmapData: controls whether dynamic capture objects receive environment light or not.
- Automatically update dynamic capture objects when the capture data changes (also works for "energy" which used to require object movement to trigger the update).
- Added "use_in_baked_light" property to GridMap: controls whether the GridMap will be included in BakedLightmap bakes.
- Set "flush zero" and "denormal zero" mode for SSE2 instructions in the Embree raycaster. According to Embree docs it should give a performance improvement.
As part of the improvements to batch more cases, batching can store final_modulate as an attribute in the vertex format rather than sending as a uniform. This allows draw calls with different final_modulate to be batched together.
However custom shader code was reading from only the final_modulate uniform, and not the attribute when it was in use. This was leading to visual errors.
This is tricky to solve, because we cannot use the same name for the attribute in the vertex and fragment shaders, because one is an attribute and one a varying, whereas a uniform is accessible anywhere. To get around this, a macro is used which can translate to the most appropriate variable depending on whether uniform or attribute or varying is required.
Although batching supported both ninepatch modes (fixed and scaling) when using ninepatch stretch mode, the ninepatch tiling modes (in GLES3) could only run through the shader.
The shader only supported one of the ninepatch modes. This PR uses the hack method of #if defined in the shader to prevent the use of a conditional. The define is set at startup according to the project setting.
GLES3 changes:
This commit makes it possible to disable 3D directional lights by using
the light's cull mask. It also automatically disables directionals when
the object has baked lighting and the light is set to "bake all".
GLES2 changes:
Added a check for the light cull mask, since it was previously ignored.
The rendering/quality/2d section of project settings is becoming considerably expanded in 3.2.4, and arguably was not the correct place for settings that were not really to do with quality.
3.2.4 is the last sensible opportunity we will have to move these settings, as the only existing one likely to break compatibility in a small way is `pixel_snap`, and given that the whole snapping area is being overhauled we can draw attention to the fact it has changed in the release notes.
Class reference is also updated and slightly improved.
`pixel_snap` is renamed to `gpu_pixel_snap` in the project settings and code to help differentiate from CPU side transform snapping.
Move definition of rendering/quality/filters/anisotropic_filter_level to
servers/visual_server.cpp, since both GLES2 and GLES3 now use it
rasterizer_storage_gles3.cpp: Remove a spurious variable write (the
value gets overwritten soon after)
- Fix Embree runtime when using MinGW (patch by @RandomShaper).
- Fix baking of lightmaps on GridMaps.
- Fix some GLSL errors.
- Fix overflow in the number of shader variants (GLES2).
Completely re-write the lightmap generation code:
- Follow the general lightmapper code structure from 4.0.
- Use proper path tracing to compute the global illumination.
- Use atlassing to merge all lightmaps into a single texture (done by @RandomShaper)
- Use OpenImageDenoiser to improve the generated lightmaps.
- Take into account alpha transparency in material textures.
- Allow baking environment lighting.
- Add bicubic lightmap filtering.
There is some minor compatibility breakage in some properties and methods
in BakedLightmap, but lightmaps generated in previous engine versions
should work fine out of the box.
The scene importer has been changed to generate `.unwrap_cache` files
next to the imported scene files. These files *SHOULD* be added to any
version control system as they guarantee there won't be differences when
re-importing the scene from other OSes or engine versions.
This work started as a Google Summer of Code project; Was later funded by IMVU for a good amount of progress;
Was then finished and polished by me on my free time.
Co-authored-by: Pedro J. Estébanez <pedrojrulez@gmail.com>
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
These were only put in for the betas, in order to test hypotheses for stalling on Macs. It seems that most of the problems in the Mac editor have been solved by fixing the excessive redraw_requests.
As a result no one has reported any results from these options, but in future we will be able to refer users to try the beta versions, so there is no need to include them in the stable release. Indeed they are only likely to cause confusion.
For fixing a previous issue state.canvas_texscreen_used was reset to false at the start of each render_joined_item. This was causing a later shader that used SCREEN_TEXTURE to force recapturing the back buffer immediately prior to use, which we don't want.
This PR preserves the state across joined items, and also prevents joining of items that copy the back buffer as this may be problematic.
It turns out that the original issue that needed the line is now fixed, and the later issue is also fixed by removing it.
While adding more debug checks to legacy renderer, I closed 2 types of vulnerabilities:
* TYPE_PRIMITIVE would previously read from uninitialized data if only specifying a single color
* Other legacy draw operations would fail in debug AFTER accessing out of bounds memory rather than before
Many calls to glBufferSubData are wrapped in a safe version which checks for out of bounds and exits the draw function if this is detected.
Large FVF allows batching of many custom shaders, but should not join items which have shaders that utilize BUILTINs which would change for each item, because these will not be sent individually, and all joined items would wrongly use the values from the first joined item.
This adds support for custom shaders for polys, and properly handles modulate in the case of large FVF and modulate FVF.
It also fixes poly vertex colors not being sent to OpenGL.
As a result of the GLES specifications being vague about best practice for how buffers should be used dynamically, different GPUs / platforms appear to have different preferences.
Mac in particular seems to have a number of problems in this area, and none of the rendering team uses Macs. So far we have relied on guesswork to choose the best usage, but in an attempt to pin this down, this PR begins to introduce manual selection of options for users to test their configurations.
In small batches using hardware transform, vertices would be drawn in incorrect positions due to the item transform being applied twice - once in the transform uniform, and once from the transform passed as a vertex attribute.
This PR alters the shader to ignore uniform transforms when using large FVF.
Due to my less than eagle-like view over these functions I had assumed they were passing in a single buffer input for the changes to make buffer uploading more efficient. They aren't, which is less than ideal.
So these particular changes should be reverted. When I have some more time I'll see whether the API for these calls can be changed, because as is the multiple glSubBufferData calls could be causing stalls on some hardware.
It can be enabled in the Project Settings
(`rendering/quality/filters/use_debanding`). It's disabled
by default as it has a small performance impact and can make
PNG screenshots much larger (due to how dithering works).
As a result, it should be enabled only when banding is noticeable enough.
Since debanding requires a HDR viewport to work, it's only supported
in the GLES3 backend.
This is part of effort to make more efficient use of the API for devices with poor drivers. This eliminates multiple calls to glBufferSubData per update.
Batching is mostly separated into a common template which can be used with multiple backends (GLES2 and GLES3 here). Only necessary specifics are in the backend files.
Batching is extended to cover more primitives.
Don't apply lighting to objects when they have a lightmap texture and
the light is set to BAKE_ALL. This prevents applying the same direct
light twice on the same object and makes setting up scenes with mixed
lighting much easier.
Option in MeshInstance to enable software skinning, in order to test
against the current USE_SKELETON_SOFTWARE path which causes problems
with bad performance.
Co-authored-by: lawnjelly <lawnjelly@gmail.com>
- Fade reflection towards inner margin and clip it at screen edges instead of external margin.
- Round edges of the fade margin if both are being cut off to prevent sharp corners.
When not using TEXTURE_RECT path, flips have to sent via another method to the shader, to ensure that normal maps are correctly adjusted for direction. This PR adds an extra vertex attribute, LIGHT_ANGLE.
For nvidia workarounds, where the shader still has access to the final transform and extra matrix, the LIGHT_ANGLE can be 0 (no adjustment), 180 degrees for a horizontal flip, and negative indicates a vertical flip.
For batching path, the LIGHT_ANGLE can be used to directly specify the light angle for normal mapping, even when the final transform and extra matrix have been baked into vertex positions, so the same shader can be used for both.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
Affects per-pixel transparency
The current method renders to the screen by copying the GLES output to a
DIB for transparency using the CPU instead of rendering directly to the
window via the GPU. This is slower and also forces the window to be borderless
as WS_EX_LAYERED affects the non-client region as well.
This change uses DWMEnableBlurBehindWindow which allows using the standard
glClearColor() background alpha and is also performed through the GPU,
eliminating CPU bottlenecks
- Resurrect it for GL ES 2
- Apply roll over with `fmod()` instead of resetting it to 0
- Expose the setting from the `VisualServer`, since it does not belong in any specific rasterizer
Fixes#26637.
Fixes#19900.
The viewport_size returned by get_viewport_size was previously incorrect, being half the correct value. The function is renamed to get_viewport_half_extents, and now returns a Vector2.
Code which called this function has also been modified accordingly.
This PR also fixes shadow culling when using ortho cameras, because the correct input for CameraMatrix::set_orthogonal should be the full HEIGHT from get_viewport_half_extents, and not half the width.
It also fixes state.ubo_data.viewport_size in rasterizer_scene_gles3.cpp to be the width and the height of the viewport in pixels as stated in the documentation, rather than the current value which is half the viewport extents in worldspace, presumed to be a bug.
All the calculations leading up to `mipLevel` are only relevant for
Panorama mode. Similarly, the `source_resolution` uniform is only
needed for that mode.
`ERROR: _display_error_with_code: CanvasShaderGLES3: Fragment Program Compilation Failed:
0:166(2): error: `return' with wrong type int, in function `map_ninepatch_axis' returning float` caused by #34704
Some cases were not handled properly for Polygon2D after making changes in common code to fix Line2D antialiasing. Added an option for drawing polygons to differentiate the two use cases.
Fixes#34568
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Polygon2D:
The property wasn't used anymore after switching from canvas_item_add_polygon() to canvas_item_add_triangle_array() for drawing.
Line2D:
Added the same property as for Polygon2D & fixed smooth line drawing to use indices correctly.
Fixes#26823
As discussed in #32657, this can't be done here as lines can be used
with a canvas scale, and this breaks them.
A suggestion is to do the pixel shifting at matrix level instead.
Fixes#33393.
Fixes#33421.
While OpenGL ES 3.0 and WebGL 2.0 both support non power-of-2 (NPOT)
textures in their specification, the situation seems to be less clear
about *compressed* NPOT textures using repeat or mipmap flags.
At least Chrome on Linux doesn't seem to support this combination,
and a variety of mobile hardware have similar limitations.
As a workaround, we force decompressing such textures when running on
WebGL 2.0, at the cost of loading time and memory usage.
Fixes#33058.
OpenGL uses the diamond exit rule to rasterize lines. If we don't shift
the points down and to the right by 0.5, the line can sometimes miss a
pixel when it shouldn't. The final fragment of a line isn't drawn. By
drawing the lines clockwise, we can avoid a missing pixel in the rectangle.
See section 3.4.1 in the OpenGL 1.5 specification.
Fixes#32279
In 2.1 and 3.0, light_vec could be modified for altering shadow_computations.
But it broke shadows when rotating light. shadow_vec would do the same, but without breaking
shadows in rotated lights if not used.
Add inverse light transformation to shadow vec, so it's not affected when rotating lights;
Added usage define for shadow vec.
For shadow vec working properly when rotating a light, it's needed to multiply it by light_matrix normalized. Added usage define in order to don't do that if shadow_vec not used.
Changed the behaviour of the Linear tonemapping operator to not clamp to [0, 1] range
in the case when KEEP_3D_LINEAR is defined. This allows to render values > 1.0 in
floating point texture targets (via Viewport) for further processing or saving high
dynamic range data into files. This only works when no color conversion is active.
Rémi Verschelde
JFonS
lawnjelly
Ev1lbl0w
clayjohn
hoontee
Kayomn
Kef Schecter
Rémi Verschelde
Hugo Locurcio
Unknown
Juan Linietsky
PouleyKetchoupp
Yetizone
Arman
Fredia Huya-Kouadio
azagaya
Pedro J. Estébanez
Yuri Roubinsky
Technohacker
fhuya
Tritium Oxide
Winston
Bruno Lourenço
Bojidar Marinov
Ricardo Maes
Bastiaan Olij
Rafał Mikrut
Paul Trojahn
Valentin Zagura
RaphaelHunter
Holger Dammertz