Based on #62896, only implements the BPM support part.
* Implements BPM support in the AudioStreamOGG/MP3 importers.
* Can select BPM/Bar Size and total beats in a song file, as well as edit looping points.
* Looping is now BPM aware
* Added a special importer UI for configuring this.
* Added a special preview showing the audio waveform as well as the playback position in the resource picker.
* Renamed `AudioStream::instance` to `instantiate` for correctness.
* Ensures thread safety when resources are destroyed.
* Simplified API by always forcing `ResourceCache::get_ref`, which needs less hacks and is fully thread safe.
* Removed RWLock for resources because its not possible to use for the new logic. Should not be a problem.
Supersedes #57533
This is done to prevent reducing texture quality when it doesn't save
much video memory, especially for pixel art.
The size threshold can be adjusted in the project settings.
To get the previous behavior where textures detected to be used in 3D
had their compression mode always set to VRAM, set this to the lowest value
(16).
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
Adds a new, cleaned up, HashMap implementation.
* Uses Robin Hood Hashing (https://en.wikipedia.org/wiki/Hash_table#Robin_Hood_hashing).
* Keeps elements in a double linked list for simpler, ordered, iteration.
* Allows keeping iterators for later use in removal (Unlike Map<>, it does not do much
for performance vs keeping the key, but helps replace old code).
* Uses a more modern C++ iterator API, deprecates the old one.
* Supports custom allocator (in case there is a wish to use a paged one).
This class aims to unify all the associative template usage and replace it by this one:
* Map<> (whereas key order does not matter, which is 99% of cases)
* HashMap<>
* OrderedHashMap<>
* OAHashMap<>
These typedefs don't save much typing compared to the full `Ref<Resource>`
and `Ref<RefCounted>`, yet they sometimes introduce confusion among
new contributors.
Didn't commit all the changes where it wants to initialize a struct
with `{}`. Should be reviewed in a separate PR.
Option `IgnoreArrays` enabled for now to be conservative, can be
disabled to see if it proposes more useful changes.
Also fixed manually a handful of other missing initializations / moved
some from constructors.
Convert method signature parameters to const where it is possible
# Conflicts:
# drivers/gles3/rasterizer_canvas_gles3.cpp
# drivers/gles3/rasterizer_canvas_gles3.h
# editor/plugins/animation_state_machine_editor.cpp
# editor/plugins/animation_state_machine_editor.h
HDRI panoramas designed for realistic lighting can have extremely
bright suns, causing fireflies to appear in the environment reflection
(in addition to making environment lighting too bright when a
DirectionalLight3D is used).
This uses the Filament tonemapping formula.
The new name contrasts it better with `find_parent`, and makes it clear
that it only matches child/descendant nodes.
Also rename `find_nodes` to `find_children` accordingly.
Add "generate_mipmap" font import option.
Add some missing features to the Sprite3D.
Move BiDi override code from Control to TextServer.
Add functions to access TextServer font cache textures.
Add MSDF related flags and shader to the standard material.
Change standard material cache to use HashMap instead of Vector.
- Display the source file path.
- Display the valid compression algorithms on desktop platforms.
- Use "desktop platforms" instead of "PC" to avoid ambiguity.
- Use "may" instead of "will", as desktop platforms can still sometimes
display ETC1/ETC2 textures depending on the GPU and drivers.
Added the ability to import scenes as AnimationLibrary
* Completes implementation of https://github.com/godotengine/godot-proposals/issues/4296
* Helps if you want to export animations to a separate file (say a GLTF) to avoid re-importing/exporting them every time the model changes.
* Helps if you simply want to have animations using a dummy model, which can be shared across multiple models.
Creates a secondary scene importer used only for animations.
**NOTE**: A new flag for scene importer: EditorSceneFormatImporter.IMPORT_DISCARD_MESHES_AND_MATERIALS has been added, to hint importers that they should skip meshes and animations (and hence make importing faster). It is not implemented in any importer yet, this should be done in a separate PR.
* Instead of containing single animations, AnimationPlayer now contains libraries.
* Libraries, in turn, contain the animations.
This paves the way for implementing the possibility of importing scenes as animation libraries, finally allowing to import animations separate from the 3D models.
Missing (will be done on separate PRs):
* Make it possible to import scenes (dae/fbx/gltf) as animation libraries.
* Make it possible for AnimationTree to import animation libraries on its own, so it does not rely on AnimationPlayer for everything.
This pull request resolves an issue where images being imported with lossless compression allowed you to select a normal map, but the normal map only applies if you're using VRAM compression. Thereby making it redundant to appear when using lossless compression. This pull request hides the normal map option when lossless compression is selected.
Resolves: #59435
The new `edit/loop_mode` import options lets user choose to either:
- Detect loop points from the WAV (default, same behavior as before)
- Set the loop mode and loop points manually like in AudioStreamSample
Fixes#46164.
* Its not and will not be used for streaming.
* Streaming will be implemented in 4.1 and it will work different.
* It makes more sense to be called CompressedTexture since it imports and compresses texture files.
Changed 'find_node' to 'find_nodes' which now returns an 'TypedArray<Node>', as well as Added a 'type' parameter to match against specific node types, which supports inheritance.
Removes some unnecessary includes from `editor_node.h`, and instead add
those where they're used.
Removes unnecessary `editor_node.h` includes in various editor classes.
Renames `dynamicfont` to `dynamic_font` in a couple files.
Misc cleanup while jumping through that rabbit hole.
This has several benefits:
- Baking is now significantly faster out of the box (often twice as fast).
- Lightmap texture file sizes are often divided by 2 or 3.
- Baking requires less memory and is less likely to crash on large scenes.
Visual quality may be degraded, but it's usually not very noticeable
in the default configuration where only indirect lighting is baked.
This reverts commit a988fad9a0.
As discussed in #57725 and clarified in #57788, `SNAME` is not meant to be used
everywhere but only in critical code paths. For theme methods specifically, it
was by design that only getters use `SNAME` and not setters.
Improvements:
* Occluder3D is now an abstract type inherited by: ArrayOccluder3D, QuadOccluder3D, BoxOccluder3D, SphereOccluder3D and PolygonOccluder3D. ArrayOccluder3D serves the same purpose as the old Occluder3D (triangle mesh occluder) while the rest are primitives that can be used to manually place simple occluders.
* Occluder baking can now apply simplification. The "bake_simplification_distance" property can be used to set a world-space distance as the desired maximum error, set to 0.1 by default.
* Occluders can now be generated on import. Using the "occ" and "occonly" keywords (similar to "col" and "colonly" for colliders) or by enabling on MeshInstance3Ds in the scene's import window.
Fixes:
* Fixed saving of occluder files after bake.
* Fixed a small error where occluders didn't correctly update in the rendering server.
Bonus content:
* Generalized "CollisionPolygon3DEditor" so it can also be used to edit Resources. Renamed it to "Polygon3DEditor" since it was already being used by other things, not just colliders.
* Fixed a small bug in "EditorPropertyArray" where a call to "remove" was left after the "remove_at" rename.
This was changed in #56943 to allow adding new importers from plugins that
take precedence over built-in ones, but this should be opt-in, not the default
behavior.
Fixes#57730.
This also renames the Static Lightmaps option hint to be more explicit
about which GI techniques are supported (as VoxelGI/SDFGI can still
be used with Static Lightmaps).
A common source of errors is to call functions (such as round()) expecting them to work in place, but them actually being designed only to return the processed value. Not using the return value in this case in indicative of a bug, and can be flagged as a warning by using the [[nodiscard]] attribute.
On the only platform where PVRTC is supported (iOS),
ETC2 generally supersedes PVRTC in every possible way. The increased
memory usage is not really a problem thanks to modern iOS' devices
processing power being higher than its Android counterparts.
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,expct,fave,findn,gird,hist,inh,inout,leapyear,lod,nd,numer,ois,ony,paket,ro,seeked,sinc,switchs,te,uint,varn,vew`
-Allows displaying custom options for specific file format variants
-Added support for scene format import to retrieve custom options
This PR is necessary for #54886 to be implemented properly.
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
Roughly based on https://github.com/godotengine/godot-proposals/issues/3375 (used format is slightly different).
* Implement bitwidth based animation compression (see animation.h for format).
* Can compress imported animations up to 10 times.
* Compression format opens the door to streaming.
* Works transparently (happens all inside animation.h)
* New track type BLEND_SHAPE
* Blend shapes are imported via this new track type
* Processing is more optimized (no longer relies on variants)
* Modified the Blend Shape API in MeshInstance3D to use indices rather than StringNames (more optimizes)
* Promo: Fixed a small bug in gizmo updating in Node3D that affected performance
Dedicated BlendShape tracks are required for both optimization and eventually implementing them in animation compression.
* New plugin system to control the whole import workflow
* Can add options and run code at every import step (general, per node, mesh, animation, material etc.)
This constitutes a first version of these plugins. The ability to interact with the import preview dialog will likely be added later on.
Following actions are supported for each track type (position, rotatin, scale):
* ImportIfPresent: If a track of this type is found, import it.
* ImportIfPresentForall (default): If a track is found for a given node/bone, create it in animations. This ensures there is always a correct blending.
* Never: Delete all tracks found for a given type. This is useful if you want to, as an example, force to import rotations only.
* Animations and Skeletons are now pose-only.
* Rest transform is kept as reference (when it exists) and for IK
* Improves 3D model compatibility (non uniform transforms will properly work, as well as all animations coming from Autodesk products).
* `Animation.TYPE_TRANSFORM3D` track is gone.
* Added POSITION_3D, ROTATION_3D, SCALE_3D tracks.
* GLTF2, Collada, FBX importers will only import the track types found.
* Skeleton3D bone poses are now Pos/Rot/Scale, pose matrix removed.
* AnimationPlayer and AnimationTree animate these tracks separately, only when found.
* Removed BakeReset code, is useless with these changes.
This is the first in a series of commits designed to make the animation system in Godot more useful, which includes:
* Better compatibility with Autodesk products
* Better reusability of animations across models (including retargeting).
* Proper animation compression.
* etc.
*Note* GLTF2 animation saving went broken with this PR, needs to be fixed in a subsequent one.
Convert GLTF Document to use ImporterMeshInstance3D.
Add a GLTFDocument extension list and an extension for converting the importer mesh instance 3d to mesh instance 3d.
Use GLTF module when the editor tools are disabled.
Modified the render server to be less restrictive on matching blend arrays and have more logging.
Misc bugs with multimesh.
Always index the meshes.
* Fixed LODs for shadow meshes.
* Added a merging step before simplification. This helps with tesselated
meshes that were previously left untouched. The angle difference at
wich edges ar considered "hard" can be tweaked as an import setting.
* LODs will now start with the highest decimation possible and keep
doubling (approximately) the number of triangles from there. This
makes sure that very low triangle counts are included when possible.
* Given more weight to normal preservation.
* Modified MeshOptimizer to report distance-based error instead of
including attributes in the reported metrics.
* Added attribute transference between the original mesh and the
various LODs. Right now only normals are taken into account,
but it could be expanded to other attributes in the future.
Add glTF2 uri decode for paths.
Add vertex custom apis.
Add scene importer api.
Change Color to float; add support for float-based custom channels in SurfaceTool and EditorSceneImporterMesh
Co-authored-by: darth negative hunter
<thenegativehunter2@users.noreply.github.com>
With this PR it's possible to add a collision during the Mesh import, directly in editor.
To generate the shape is possible to chose between the following options:
- Decompose Convex: The Mesh is decomposed in one or many Convex Shapes (Using the VHACD library).
- Simple Convex: Is generated a convex shape that enclose the entire mesh.
- Trimesh: Generate a trimesh shape using the Mesh faces.
- Box: Add a primitive box shape, where you can tweak the `size`, `position`, `rotation`.
- Sphere: Add a primitive sphere shape, where you can tweak the `radius`, `position`, `rotation`.
- Cylinder: Add a primitive cylinder shape, where you can tweak the `height`, `radius`, `position`, `rotation`.
- Capsule: Add a primitive capsule shape, where you can tweak the `height`, `radius`, `position`, `rotation`.
It's also possible to chose the generated body, so you can create:
- Rigid Body
- Static Body
- Area
i have added the option to chose normal map for channel pack. this will force the to use red and green channels for the texture only. the option is added meaning it will not conflict with the existing settings.
i have made this change as a response to my own proposal
Bugsquad edit: Closesgodotengine/godot-proposals#3184
* New syntax is type safe.
* New syntax allows for type safe virtuals in native extensions.
* New syntax permits extremely fast calling.
Note: Everything was replaced where possible except for `_gui_input` `_input` and `_unhandled_input`.
These will require API rework on a separate PR as they work different than the rest of the functions.
Added a new method flag METHOD_FLAG_OBJECT_CORE, used internally. Allows to not dump the core virtuals like `_notification` to the json API, since each language will implement those as it is best fits.
Infinite inertia:
Not needed anymore, since it's now possible to set one-directional
collision layers in order for characters to ignore rigid bodies, while
rigid bodies still collide with characters.
Ray shapes:
They were introduced as a work around to allow constant speed on slopes,
which is now possible with the new property in CharacterBody instead.
The function `_gen_shape_list` is using the resource `Res<Mesh>`, but during the import phase the resource used is instead `Ref<EditorSceneImporterMesh>`.
Note: the `Ref<EditorSceneImporterMesh>` is an intermediate resource, that will be used to create a `Res<Mesh>` at the end of the import process. `Ref<EditorSceneImporterMesh>` and `Ref<Mesh>` are not inheriting each other, so the internal cast done by `Ref<>` during the assignment, is always null:
```c++
Ref<EditorSceneImporterMesh> import_mesh(/* Assume it's initialized */);
CRASH_NOW(import_mesh.is_null());
Ref<Mesh> mesh = import_mesh;
CRASH_NOW(mesh.is_null()); // <--- Here we have a crash, since it's impossible perform the above cast, and the `mesh` is always null.
```
Here the full list of call to `_gen_shape_list`, where we can notice that a `Ref<EditorSceneImporterMesh>` is passed:
- https://github.com/AndreaCatania/godot/blob/master/editor/import/resource_importer_scene.cpp#L428
- https://github.com/AndreaCatania/godot/blob/master/editor/import/resource_importer_scene.cpp#L454-L458
- https://github.com/AndreaCatania/godot/blob/master/editor/import/resource_importer_scene.cpp#L512-L516
As you can notice, we always pass the following mesh: `Ref<EditorSceneImporterMesh> mesh = mi->get_mesh();`.
We already have the function `_pre_gen_shape_list` that executes the exact same job but using the correct type; Since there is no further usage of the function `_gen_shape_list` in the code base, I think it's just some leftover code, so I removed it entirely to use the proper function.
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
Clean: remove duplicate and interior vertices (uses Bullet algorithm)
Simplify: modify the geometry for further simplification (uses VHACD
algorithm)
In the editor, single convex hull now uses the clean option.
Added a new editor entry to create a simplified convex hull, can be
useful for creating convex hull from highly tessellated triangle meshes.
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
Renames get_parent_spatial() to get_parent_node3d() and changes its
implementation. Before it was not returning a correct pointer if the
node wasn't added to a SceneTree. Now it uses the same implementation as
CanvasItem, which will be correct even for nodes outside a SceneTree.
This can be used to invert a normal map's direction.
The "Invert" import option is no longer useful in Godot 4.0 since
it uses height maps instead of depth maps in StandardMaterial3D.
This closes https://github.com/godotengine/godot-proposals/issues/785.
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Various fixes to UV2 unwrapping and the GPU lightmapper. Listed here for
context in case of git blame/bisect:
* Fix UV2 unwrapping on import, also cleaned up the unwrap cache code.
* Fix saving of RGBA images in EXR format.
* Fixes to the GPU lightmapper:
- Added padding between atlas elements, avoids bleeding.
- Remove old SDF generation code.
- Fix baked attenuation for Omni/Spot lights.
- Fix baking of material properties onto UV2 (wireframe was
wrongly used before).
- Disable statically baked lights for objects that have a
lightmap texture to avoid applying the same light twice.
- Fix lightmap pairing in RendererSceneCull.
- Fix UV2 array generated from `RenderingServer::mesh_surface_get_arrays()`.
- Port autoexposure fix for OIDN from 3.x.
- Save debug textures as EXR when using floating point format.
- For now everything imports multithreaded by default (should work I guess, let's test).
- Controllable per importer
Early test benchmark. 64 large textures (importing as lossless, _not_ as vram) on a mobile i7, 12 threads:
Importing goes down from 46 to 7 seconds.
For VRAM I will change the logic to use a compressing thread in a subsequent PR, as well as implementing Betsy.
Its only purpose was to prevent importing CSV files as translations, but it
would still import them as *nothing*, leading to workflow issues.
This is now properly fixed with #47268 which allows disabling the import for
specific files.
* Added option for importers to show an Advanced settings dialog
* Created advanced settings dialog for Scene Importer
* Cleaned up importers (remove many old/unused options)
* Added the ability to customize every node, material, mesh and animation individually
* Saving to animations and meshes to files is now a manual process, making it more predictable
* Added the ability for materials to be replaced by external files (or to be made external, up to you).
* When doubleclicking an impoted scene in the filesystem dock, it automatically shows the import settings instead of asking to open it.
WARNING: Lightmap UV unwrap is not working, it needs to be re-made.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
Micky
fabriceci
Rémi Verschelde
Yuri Sizov
bruvzg
Silc Renew
kobewi
Aaron Franke
Yuri Sizov
DeeJayLSP
Rindbee
Rémi Verschelde
reduz
luz paz
FireForge
Fabian Keller
Dave Palais
Hugo Locurcio
Jakob Gillich
trollodel
Aaron Record
Douglas Leão
mightygoat
Markus Sauermann
Haoyu Qiu
Nicholas Huelin
Adam Scott
Fazil Babu
K. S. Ernest (iFire) Lee
FireForge
Michael Alexsander
TechnoPorg
Jason Knight
diddykonga
megalobyte
Hendrik Brucker
jfons
jmb462
Anilforextra
Nathan Franke
lawnjelly
Ricardo Buring
luz paz
Marc Gilleron
Nathan Franke
Giwayume
Yuri Roubinsky
Lyuma
Gilles Roudière
K. S. Ernest (iFire) Lee
Brian Semrau
Chained Lupine
Marcel Admiraal
Maverick Liberty
boruok
darth negative hunter
Camille Mohr-Daurat
AndreaCatania
Kirill Diduk
Wilson E. Alvarez
Pedro J. Estébanez
Morris Tabor
Saracen
Juan Linietsky
clayjohn
Rishabh Abhani
Gordon MacPherson
Shatur95
Alex Hirsch