While calculating interpolated points, intervals between two baked
points has been assummed to be `baked_interval`. The assumption could
cause significant error in some extreme cases (for example #7088).
To improve accuracy, `baked_dist_cache` is introduced, which stores
distance from starting point for each baked points. `interpolate_baked`
now returns exact linear-interpolated position along baked points.
Capsule height and radius setters can modify each other, rather than
using clamping, to avoid cases where values are not set correctly when
loading a scene (depending on the order of properties).
Inspector undo/redo:
Added the possibility to link properties together in the editor, so
they can be undone together, for cases where a property can modify
another one.
Gizmo undo/redo:
Capsule handles pass both radius and height values so they can be undone
together.
OmniLight3D:
* Fixed lack of precision in cube map mode by scaling the projection's
znear.
* Fixed aliasing issues by making the paraboloids use two square regions instead of two half
squares.
* Fixed shadowmap atlas bleeding by adding padding.
* Fixed sihadow blur's inconsistent radius and unclamped sampling.
SpotLight3D:
* Fixed lack of precision by scaling the projection's znear.
* Fixed normal biasing.
Both:
* Tweaked biasing to make sure it works out of the box in most situations.
Move the former "spawnables" functions to a dedicated
MultiplayerReplicator class.
Support custom overrides in replicator.
Spawn/despawn messages can now contain a state.
The state can be automatically encoded/decoded by passing the desired
object properties to `spawnable_config`.
You can use script properties to optimize the state representation.
2 Callables can be also specified to completely override the default
implementation for sending and receiving the spawn/despawn event.
(9 bytes overhead, and there's room for improvement here).
When using a custom implementation `spawn` and `despawn` can be called
with any Object, `send_spawn`/`send_despawn` can receive any Variant as
a state, and the path is not required.
Two new functions, `spawn` and `despawn`, convey the implementation
independent method for requesting a spawn/despawn of an Object, while
`send_spawn` and `send_despawn` represent the more low-level send event
for a Variant to be used by the custom implementations.
When a shader error is printed about a built-in shader, the origin
of the shader will now be recognizable immediately by looking at
the top of the printed shader code.
Tentative fix for missing bones when bones are not sorted as expected.
For example, if the root comes last, all child bones are removed and
the skeleton ends up with just the root.
* Make Undo/Redo menu items disabled when clicking it does nothing.
* Context menu of `TextEdit`
* Context menu of `LineEdit`
* Editor's Scene menu
* Script editor's Edit menu and context menu (for Script and Text)
* Make editor undo/redo log messages translatable.
* Mark `UndoRedo`'s `has_{un,re}do()` methods as `const`.
* Expose `TextEdit`'s `has_{un,re}do()` to scripts since `{un,re}do()` are already available.
This comment is useful to determine the origin of ShaderMaterials
converted from built-in material types (such as CanvasItemMaterial
or StandardMaterial3D).
The Godot version is also included in case the shader needs to be
regenerated with a newer engine version.
Changes:
- Rename few methods/property and group them in the editor when it's possible
- Make MotionResult API consistency with KinematicCollision
- Return a boolean in move_and_slide if there was a collision
- New methods:
- get_floor_angle on CharacterBody to get the floor angle.
- get_angle on KinematicCollision to get the collision angle.
- get_last_slide_collision to quickly get the latest collision of move_and_slide.
This PR and commit adds a new IK system for 3D with the Skeleton3D node
that adds several new IK solvers, as well as additional changes and functionality
for making bone manipulation in Godot easier.
This work was sponsored by GSoC 2020 and TwistedTwigleg
Full list of changes:
* Adds a SkeletonModification3D resource
* This resource is the base where all IK code is written and executed
* Adds a SkeletonModificationStack3D resource
* This node oversees the execution of the modifications and acts as a bridge of sorts for the modifications to the Skeleton3D node
* Adds SkeletonModification3D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in it's own file
* Several changes to Skeletons, listed below:
* Added local_pose_override, which acts just like global_pose_override but keeps bone-child relationships intract
* So if you move a bone using local_pose_override, all of the bones that are children will also be moved. This is different than global_pose_override, which only affects the individual bone
* Internally bones keep track of their children. This removes the need of a processing list, makes it possible to update just a few select bones at a time, and makes it easier to traverse down the bone chain
* Additional functions added for converting from world transform to global poses, global poses to local poses, and all the same changes but backwards (local to global, global to world). This makes it much easier to work with bone transforms without needing to think too much about how to convert them.
* New signal added, bone_pose_changed, that can be used to tell if a specific bone changed its transform. Needed for BoneAttachment3D
* Added functions for getting the forward position of a bone
* BoneAttachment3D node refactored heavily
* BoneAttachment3D node is now completely standalone in its functionality.
* This makes the code easier and less interconnected, as well as allowing them to function properly without being direct children of Skeleton3D nodes
* BoneAttachment3D now can be set either using the index or the bone name.
* BoneAttachment3D nodes can now set the bone transform instead of just following it. This is disabled by default for compatibility
* BoneAttachment3D now shows a warning when not configured correctly
* Added rotate_to_align function in Basis
* Added class reference documentation for all changes
- Back to 1-based layer names to make it clearer in editor UI
- Layer bit accessors are renamed to layer value and 1-based too
- Uniform errors and documentation in render and physics
- Fix a few remaining collision_layer used in place of collision_mask
Previously, you would be able to double click a word, followed by
single-clicking another word on the same line, which would select the
entire line. Now, it will only select the whole line if the mouse
position has remained the same after the double click. This mimicks the
behavior in most third party text editors.
Fixes#51312.
This is to mimic the behavior of many third party text editors. The
reason it's not doing it when moving by word is due to that behavior
being mostly the same on other editors.
This makes it clearer that this property is only about physics FPS,
not rendering FPS.
The `physics_fps` project setting was also renamed to
`physics_ticks_per_second` for consistency.
This PR and commit adds the functionality to arrange nodes in VisualScript/VisualShader editor. The layout generated by this
feature is compact, with minimum crossings between connections
& uniform horizontal & vertical gaps between the nodes.
This work has been sponsored by GSoC '21.
Full list of additions/changes:
• Added arrange_nodes() method in GraphEdit module.
• This method computes new positions for all the selected
nodes by forming blocks and compressing them.
The nodes are moved to these new positions.
• Adding this method to GraphEdit makes it available for
use in VisualScript/VisualShaders editors and its other
subclasses.
• Button with an icon has been added to call arrange_nodes() in GraphEdit.
• This button is inherited by VisualScript/VisualShaders editors
to invoke the method.
• Undo/redo is functional with this method.
• By using signals in arrange_nodes(), position changes are registered
in undo/redo stack of the subclass that is using the method.
• Metadata of the method has been updated in ClassDB
• Method description has been added to class reference of GraphEdit
Infinite inertia:
Not needed anymore, since it's now possible to set one-directional
collision layers in order for characters to ignore rigid bodies, while
rigid bodies still collide with characters.
Ray shapes:
They were introduced as a work around to allow constant speed on slopes,
which is now possible with the new property in CharacterBody instead.
Same thing that was already done in 2D, applies moving platform motion
by using a call to move_and_collide that excludes the platform itself,
instead of making it part of the body motion.
Helps with handling walls and slopes correctly when the character walks
on the moving platform.
Also made some minor adjustments to the 2D version and documentation.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
When synchronizing CharacterBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
`PackedScene`s can be configured to be spawnable via a new
`MultiplayerAPI.spawnable_config` method.
They can be configured either to be spawned automatically when coming
from the server or to always require verification.
Another method, `MultiplayerAPI.send_spawn` lets you request a spawn on
the remote peers.
When a peer receive a spawn request:
- If it comes from the server and the scene is configured as
`SPAWN_MODE_SERVER`:
- Spawn the scene (instantiate it, add it to tree).
- Emit signal `network_spawn`.
- Else:
- Emit signal `network_spawn_request`.
In a similar way, `despawn`s are handled automatically in
`SPAWN_MODE_SERVER`.
In `SPAWN_MODE_SERVER`, when a new client connects it will also receive,
from the server all the spawned (and not yet despawned) instances.
In a given quadrant there can be one or more bodies used, and the
process iterated over cells to add the shapes, so the shape index
doesn't necessarily correspond to the polygon shape index.
Instead body shape indices need to be tracked separately.
Having a property which has the same name as its class leads to confusing
situations (e.g. `BaseButton` has a `shortcut` property of type `Shortcut`
which has a `shortcut` property of type `InputEvent`).
Also renames `is_event` to `matches_event`, and `is_valid` to `has_valid_event`
to better reflect what the methods check.
- Now able to display up to 32 layers in physics (still 20 for render)
- Adjustable grid size to fit available space in dock
- Expansion icon to display more layers vertically
- Layer numbers in cells to help with selection
* Simplified code a lot, bias based on normalized cascade size.
* Lets scale cascades, max distance, etc. without creating acne.
* Fixed normal biasing in directional shadows.
I removed normal biasing in both omni and spot shadows, since the technique can't be easily implemented there.
Will need to be replaced by something else.
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
* Most resource types now have unique identifiers.
* Applies to text, binary and imported resources.
* File formats reference both by text and UID (when available). UID always has priority.
* Resource UIDs are 64 bits for better compatibility with the engine.
* Can be represented and used textually, example `uuid://dapwmgsmnl28u`.
* A special binary cache file is used and exported, containing the mappings.
Example of how it looks:
```GDScript
[gd_scene load_steps=2 format=3 uid="uid://dw86wq31afig2"]
[ext_resource type="PackedScene" uid="uid://bt36ojelx8q6c" path="res://subscene.scn" id="1_t56hs"]
```
GDScript, shaders and other special resource files can't currently provide UIDs, but this should be doable with special keywords on the files.
This will be reserved for future PRs.
* Clean-up of node_3d_editor_plugin.{h,cpp}: removed unused code, fixed some bugs.
* Moved node_3d_editor_gizmos.{h,cpp} to editor/plugins.
* Added support for multiple gizmos per node. This means custom gizmos will no longer override the built-in ones and that multiple gizmos can be used in more complex nodes.
* Added support for handle IDs. When adding handles to a gizmo, an ID can be specified for each one, making it easier to work with gizmos that have a variable number of handles.
* Added support for subgizmos, selectable elements that can be transformed without needing a node of their own. By overriding _subgizmo_intersect_frustum() and/or _subgizmo_intersect_ray() gizmos can define which subgizmos should be selected on a region or click selection. Subgizmo transformations are applied using get/set/commit virtual methods, similar to how handles work.
The internal processing code only works for OS windows, since it takes
the mouse position relative to the window and not the viewport. Now we
make sure it's not called in single-window mode.
* Friendlier with version control.
* Generates pseudo unique IDs, to minimize conflicts when merging, but still
user readable (so, not UUID).
* Eventually will also allow to have more precisely named sub-resources in
imported files.
* This will allow better reloading on changes (including resources already
loaded) as well as better keeping track of changes on the DCC.
* Keeps backward compatibility with the old formats.
* Binary and text format version incremented to mark breakage in forward
compatibility.
The member popped_up is used to avoid closing a Popup before it had a
chance to be focused. It wasn't reset properly when the popup is hidden,
causing the Popup to close right after showing in some random cases
(spotted on X11, might not happen on Windows).
* Create the shader on demand.
* Makes sure compilation happens only once, then shader is cached.
* Speeds up scene loading times.
* Speeds up editor initialization.
The `Math_INF` and `Math_NAN` defines were just aliases for those
constants, so we might as well use them directly.
Some portions of the code were already using `INFINITY` directly.
* Added explicit return type to the SNAME macro.
* Add some extra SNAME usages.
* Change some ClassDB methods to use const StringName & arguments.
* Cache the Window parent in Control because it's used in
is_layout_rtl(), which is called often.
* Only enable internal processing for viewports that need it.
* Change CanvasItem::group to be a StringName because it's only used as
that.
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
* LineEdit popups created on demand.
* TextEdit popups created on demand.
* SpinSlider popups created on demand.
* ResourcePicker popups created on demand.
Improves editor responsiveness.
Now static body is used for moving platforms through kinematic motion
property, so sync to physics needs to be in StaticBody2D instead of
CharacterBody2D.
Constant kinematic motion is also supported in combination with sync to
physics for smoother movements.
Fixing by applying the movement in two steps, first the platform
movement, and then the body movement. Plus, add the platform movement
when we are on_wall.
Neither name is a perfect match but `Curve3Texture` looked too similar to
`CurveTexture` and `Curve3D`, which made things confusing when picking a
texture type or browsing the API reference.
* This PR adds the ability to disable classes when building.
* For now it's only possible to do this via command like:
`scons disable_classes=RayCast2D,Area3D`
* Eventually, a proper UI will be implemented to create a build config file to do this at large scale, as well as detect what is used in the project.
requizm
Anilforextra
Jihyun Yu
Hendrik Brucker
Hugo Locurcio
fabriceci
jmb462
Rémi Verschelde
PouleyKetchoupp
JFonS
ThreeRhinosInAnElephantCostume
jfons
kobewi
Paulb23
Michael Alexsander
Yuri Sizov
Fabio Alessandrelli
TwistedTwigleg
skysphr
Mohammad Khashashneh
Haoyu Qiu
Kevin Fischer
Yuri Roubinsky
Vignesh1-art
Umang Kalra
Bhuvan Vemula
Rémi Verschelde
bruvzg
Aaron Franke
clayjohn
Morris Tabor
Melissa Geels
K. S. Ernest (iFire) Lee
hpnrep6
SaracenOne
Nathan Franke
Raul Santos
kleonc
Gilles Roudière
nikitalita
reduz
foxydevloper
vitika9
luz paz
Eric M