`rendering/quality/shadows` is now `rendering/quality/positional_shadow`
to explicitly denote that the settings only affect positional light shadows,
not directional light shadows.
Shadow atlas settings now contain the word "atlas" for easier searching.
Soft shadow quality settings were renamed to contain the word "filter".
This makes the settings appear when searching for "filter" in the
project settings dialog, like in Godot 3.x.
- Rename audio mix rate setting as the suffix is now part of the
property hint. This is also more consistent with existing mix rate
project settings.
- Improve the MovieWriter class reference.
- Tweak warning message about audio possibly going out of sync.
* Allows running the game in "movie writer" mode.
* It ensures entirely stable framerate, so your run can be saved stable and with proper sound (which is impossible if your CPU/GPU can't sustain doing this in real-time).
* If disabling vsync, it can save movies faster than the game is run, but if you want to control the interaction it can get difficult.
* Implements a simple, default MJPEG writer.
This new features has two main use cases, which have high demand:
* Saving game videos in high quality and ensuring the frame rate is *completely* stable, always.
* Using Godot as a tool to make movies and animations (which is ideal if you want interaction, or creating them procedurally. No other software is as good for this).
**Note**: This feature **IS NOT** for capturing real-time footage. Use something like OBS, SimpleScreenRecorder or FRAPS to achieve that, as they do a much better job at intercepting the compositor than Godot can probably do using Vulkan or OpenGL natively. If your game runs near real-time when capturing, you can still use this feature but it will play no sound (sound will be saved directly).
Usage:
$ godot --write-movie movie.avi [scene_file.tscn]
Missing:
* Options for configuring video writing via GLOBAL_DEF
* UI Menu for launching with this mode from the editor.
* Add to list of command line options.
* Add a feature tag to override configurations when movie writing (fantastic for saving videos with highest quality settings).
This is done to prevent reducing texture quality when it doesn't save
much video memory, especially for pixel art.
The size threshold can be adjusted in the project settings.
To get the previous behavior where textures detected to be used in 3D
had their compression mode always set to VRAM, set this to the lowest value
(16).
When an exported project crashes, the crash handler message
shouldn't reference the Godot issue tracker, as not all crashes
are Godot's fault.
Reporting crashes that only occur on exported projects is still allowed,
but it should not be done by people who aren't working on the project
in question.
Initial TAA support based on the implementation in Spartan Engine.
Motion vectors are correctly generated for camera and mesh movement, but there is no support for other things like particles or skeleton deformations.
Match NavMap and ProjectSettings with NavigationMesh defaults since the NavMap edge merging requires a matching cell_size with the NavigationMesh to create connections without issues.
This PR is a continuation to #54886
* Changed Blender path editor setting from binary to installation.
* Add a class to query whether the format is supported.
* This class allows to create proper editors to configure support.
**NOTE**: This PR only provides autodetection on Linux. Code needs to be added for Windows and MacOS to autodetect the Blender installation.
Co-authored-by: bruvzg <7645683+bruvzg@users.noreply.github.com>
Co-authored-by: Pedro J. Estébanez <pedrojrulez@gmail.com>
Lets you drag or place .fbx files in the project folder and it will import the files.
An editor setting sets the location of the fbx2gltf binary.
Enables .fbx and .blend by default.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Lets you drag or place .blend files in the project folder and it will import the files.
Checks for Blender 3.0's gltf2 `export_keep_originals` option.
Add basepath support to GLTFDocument append_from_file.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
It has been disabled in `master` since one year (#45852) and our plan
is for Bullet, and possibly other thirdparty physics engines, to be
implemented via GDExtension so that they can be selected by the users
who need them.
Add localizable string (Dictionary<Lang Code, String>) property editor and property hint.
Add localized "app name" property to the project settings.
Add localized permission and copyright properties to the macOS and iOS export settings.
Remove some duplicated ("app name") and deprecated ("info") macOS and iOS export properties.
This ensures the project setting never disappears from the editor,
even if the current physics engine is GodotPhysics.
This also adds documentation for the Smooth Trimesh Collision
project setting.
This makes it easier to spot syntax errors when editing the
class reference. The schema is referenced locally so validation
can still work offline.
Each class XML's schema conformance is also checked on GitHub Actions.
This provides a significant speedup for a small quality loss.
The quality loss is generally more noticeable during a project's
early stages of development (e.g. in level blockouts)
than it is in a finished project.
- Enable Read Sky Light to get proper outdoors lighting out of the box.
- Set bounce feedback to 0.5 by default to get a better quality result.
- Higher values may cause infinite feedback with bright surfaces.
- Increase the number of frames to converge to improve quality
at the cost of latency. Most scenes are fairly static after all.
- Use 75% Y scale by default as most scenes are not highly vertical.
- Reorder the Y scale enum to go from the lowest Y scale to the highest.
Also rename the "Disabled" setting to "100%" for clarity.
This makes sure that assigning values to enum-typed variables are
consistent. Same enum is always valid, different enum is always
invalid (without casting) and assigning `int` creates a warning
if there is no casting.
There are new test cases to ensure this behavior doesn't break in
the future.
The new default project theme uses StyleBoxFlat extensively for
a more modern design and better scalability to multiple resolutions.
SVG icons are now used in place of PNG icons. While this does not
allow for true vector-based icon drawing (icons are still rasterized
at load-time), this makes the design work easier for contributors
and opens the door to vector drawing in the future (e.g. with polygons
or SDFs).
Like for editor icons, the SVG header file is now built automatically
when a SVG file is changed. This removing the need for running
`make_header.py` manually (TODO).
The "Use Hidpi" project setting has been removed in favor of a
"Default Theme Scale" project setting, which allows creating the
default theme at a higher/lower scale than the default.
This can be used when designing GUIs with a high base resolution
to ensure crisp visuals.
Co-authored-by: Yuri Sizov <yuris@humnom.net>
On the only platform where PVRTC is supported (iOS),
ETC2 generally supersedes PVRTC in every possible way. The increased
memory usage is not really a problem thanks to modern iOS' devices
processing power being higher than its Android counterparts.
This fixes window management issues across platforms on hiDPI monitors.
The `--low-dpi` command line argument has been removed as similar
functionality (forcing low-DPI mode on DPI-aware programs) is
already provided by Windows and macOS itself.
Helps with discovery and setup of physics solver settings, in a specific
project settings section for both 2D and 3D.
Other changes for cleanup:
-Removed unused space parameters in 3D
SPACE_PARAM_BODY_ANGULAR_VELOCITY_DAMP_RATIO
SPACE_PARAM_CONSTRAINT_DEFAULT_BIAS
-Added custom solver bias for Shape3D (same as Shape2D)
-Improved documentation for solver settings
In scenes that have little to no overdraw, disabling the depth prepass
can give a small performance boost. Nonetheless, in most other scenarios,
the depth prepass should be left enabled as it improves performance
significantly.
Settings that aren't within a subsection are difficult to reach when
other settings do have a subsection.
This also adds documentation for the project setting.
On a GeForce GTX 1080 in 2002×1447 resolution, decreasing VoxelGI quality
from High to Low quality saves 1.2 ms of GPU time in a medium-sized
test scene. This only results in a minor drop in quality.
Only Vulkan is fully implemented for now, so OpenGL isn't available
in the project manager yet.
This also makes the rendering driver checks use lowercase names
everywhere for consistency.
- Rename OpenGL to GLES3 in the source code per community feedback.
- The renderer is still exposed as "OpenGL 3" to the user.
- Hide renderer selection dropdown until OpenGL support is more mature.
- The renderer can still be changed in the Project Settings or using
the `--rendering-driver opengl` command line argument.
- Remove commented out exporter code.
- Remove some OpenGL/DisplayServer-related debugging prints.
Soft shadows are relatively expensive to filter. However, with the
default blur factors, it's not needed to use too many samples
(unless PCSS-like shadows are used with a large size). Textures
and screen-space antialiasing can also be used to mask the noise
pattern effectively.
On a GeForce GTX 1080, going from Medium to Low for both shadow types
saves 0.2-0.4 ms of GPU time per frame in 2560×1440 resolution.
This can translate to significantly higher savings on lower-end GPUs.
Given how the shader works, this improves rendering performance
even if lights with shadows are never used.
This can be used to improve 3D shadow rendering quality at little
performance cost. Unlike the existing Hard setting which is limited
to variable shadow blur only, it works with both fixed blur and
variable blur.
This allows for finer control over 3D rendering resolution.
Supersampling can also be performed by setting a 3D rendering
resolution above 1.0, which is useful for offline rendering or
for very high-end GPUs.
This can be used as a shorthand for:
if OS.is_stdout_verbose():
print("...")
Unlike `print_debug()`, this works in release builds too and can
be toggled off in debug builds.
Browsers doesn't really like forcing the mix rate, e.g. Firefox does not
allow input (microphone) if the mix rate is not the default one, Chrom*
will exhibit worse performances, etc.
If enabled, key/touch/joystick events will be flushed just before every idle and physics frame.
Enabling this can greatly improve the responsiveness to input, specially in devices that need to run multiple physics frames per each idle frame, because of not being powerful enough to run at the target frame rate.
This will only work for platforms using input buffering (regardless event accumulation). Currenly, only Android does so, but could be implemented for iOS in an upcoming PR.
- Back to 1-based layer names to make it clearer in editor UI
- Layer bit accessors are renamed to layer value and 1-based too
- Uniform errors and documentation in render and physics
- Fix a few remaining collision_layer used in place of collision_mask
The project setting wasn't being used anywhere.
This also tweaks the property hints to denote that these properties
are only effective after a restart.
* Only apply final actions to attachments used in the last pass.
* Fixes to draw list final action (was using continue instead of read/drop).
* Profiling regions inside draw lists now properly throw errors.
* Ability to enable gpu profile printing from project settings. (used to debug).
This makes it clearer that this property is only about physics FPS,
not rendering FPS.
The `physics_fps` project setting was also renamed to
`physics_ticks_per_second` for consistency.
- Now able to display up to 32 layers in physics (still 20 for render)
- Adjustable grid size to fit available space in dock
- Expansion icon to display more layers vertically
- Layer numbers in cells to help with selection
For the time being we don't support writing a description for those, preferring
having all details in the method's description.
Using self-closing tags saves half the lines, and prevents contributors from
thinking that they should write the argument or return documentation there.
* Shadow quality settings now specialization constant.
* Decal and light projector filters can be set.
* Changing those settings forces re-creation of the pipelines.
These changes should help improve performance related to shadow mapping, and allows improving performance by sacrificing decal and light projector quality.
Updates rich_text_label so that the built-in documentation can be searched
Previously, it would only find the first result and would not select other results
Renames "_entered" functions to "_submitted"
* Works from RenderinServer
* Accurately tells when on or off-scren, its no longer approximate.
* VisibilityEnabler also simplified to use the process mode instead.
* RingBuffer had no reason to be in this context
* A single buffer is used that can grow as much as the game needs.
This should make thread loading entirely reliable.
Physics FPS above 1000 cause the whole project to slow down
and are not very practical in the first place (since no CPU currently
available can keep up).
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
- Tweak the setting property hint to be more informative.
- Make the setting a "basic" setting so it appears when Advanced Settings
is disabled.
- Remove redundant orientation setting in the iOS export preset.
The project setting is now used (like on Android).
Projects upgrading from a previous version will have to set the
screen orientation again in the Project Settings if it wasn't set
to the default value ("landscape").
This also acts as a general-purpose "deselect" shortcut since pressing
it a second time will deselect text.
This is available both in the script editor and in TextEdit fields
in use, both in the editor and projects.
The Duplicate Line script editor shortcut was moved to Ctrl + Shift + D
since it conflicts with the new shortcut (Ctrl + D). The rationale for
doing so is that Duplicate Line is a less commonly used action, and
its behavior can be replicated by copying and pasting the current line
anyway. (With no selection active, the whole line will be copied.)
Hugo Locurcio
Yuri Sizov
bruvzg
Rémi Verschelde
Danil Alexeev
reduz
smix8
Ellen Poe
kobewi
jfons
Rémi Verschelde
clayjohn
jordi
Fredia Huya-Kouadio
Bastiaan Olij
K. S. Ernest (iFire) Lee
JFonS
George Marques
Pawel Lampe
Samuel Pedrajas
skyace65
Marcel Admiraal
PouleyKetchoupp
Aaron Franke
Je06jm
Yuri Roubinsky
Benjamin Armstrong
qarmin
Fabio Alessandrelli
ThreeRhinosInAnElephantCostume
Pedro J. Estébanez
Angad Kambli
Hendrik Brucker
Michael Alexsander Silva Dias
Gregory Basile
Morris Tabor
Paulb23