Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
That removal was correct, but triggered a bug in our messy-as-heck main.cpp
detection logic for editor/project manager/project/command line tool...
Fixing this is for another day.
This gives visual feedback when not starting Godot from a terminal.
This could lead to confusion when placing a Godot binary within a
project folder that has no main scene defined.
Three attack points, all after the regular calculations:
1. Prevent negative physics timestep counts. They could occur if
physics_jtter_fix is changed at runtime.
2. idle_step is not allowed to go below 1/8th of the input step.
That could happen on physics_jitter_fix changes or heavily
fluctuating performance.
3. Prevent that the idle_step modification breaks the promise
that Engine.get_physics_interpolation_fraction() is between
0 and 1 by doing more physics steps than the base system wants.
Fixes#26887
Co-authored-by: Hugo Locurcio <hugo.locurcio@hugo.pro>
Allow starting the editor debugger server for the given protocol (and
optionally bound to the given ip/port combination:
godot -e --debug-server tcp://*:8080
If enabled, key/touch/joystick events will be flushed just before every idle and physics frame.
Enabling this can greatly improve the responsiveness to input, specially in devices that need to run multiple physics frames per each idle frame, because of not being powerful enough to run at the target frame rate.
This will only work for platforms using input buffering (regardless event accumulation). Currenly, only Android does so, but could be implemented for iOS in an upcoming PR.
Input buffering is implicitly used by event accumulation, but this commit makes it more generic so it can be enabled for other uses.
For desktop OSs it's currently not feasible given main and UI threads are the same).
* Only apply final actions to attachments used in the last pass.
* Fixes to draw list final action (was using continue instead of read/drop).
* Profiling regions inside draw lists now properly throw errors.
* Ability to enable gpu profile printing from project settings. (used to debug).
This makes it clearer that this property is only about physics FPS,
not rendering FPS.
The `physics_fps` project setting was also renamed to
`physics_ticks_per_second` for consistency.
* Most resource types now have unique identifiers.
* Applies to text, binary and imported resources.
* File formats reference both by text and UID (when available). UID always has priority.
* Resource UIDs are 64 bits for better compatibility with the engine.
* Can be represented and used textually, example `uuid://dapwmgsmnl28u`.
* A special binary cache file is used and exported, containing the mappings.
Example of how it looks:
```GDScript
[gd_scene load_steps=2 format=3 uid="uid://dw86wq31afig2"]
[ext_resource type="PackedScene" uid="uid://bt36ojelx8q6c" path="res://subscene.scn" id="1_t56hs"]
```
GDScript, shaders and other special resource files can't currently provide UIDs, but this should be doable with special keywords on the files.
This will be reserved for future PRs.
There are many issues with using multiple windows by default:
- Taking screenshots of a specific window will not capture subwindows.
This also applies when recording a video using tools such as OBS.
- Subwindows may not behave correctly when fullscreen mode is enabled,
especially if exclusive fullscreen is implemented in the future
to decrease input lag on Windows.
"Subwindows" is quite general here, and also refers to dropdown menus
(e.g. those spawned by OptionButton) and Control tooltips.
Therefore, it's safer to embed subwindows by default in projects.
Multi-window mode remains the default in the editor.
* This PR adds the ability to disable classes when building.
* For now it's only possible to do this via command like:
`scons disable_classes=RayCast2D,Area3D`
* Eventually, a proper UI will be implemented to create a build config file to do this at large scale, as well as detect what is used in the project.
* Fixed and redone the process to obtain render information from a viewport
* Some stats, such as material changes are too difficult to guess on Vulkan, were removed.
* Separated visible and shadow stats, which causes confusion.
* Texture, buffer and general video memory can be queried now.
* Fixed the performance metrics too.
* Deprecates GDNative in favor of a simpler, lower level interface.
* New extension system allows registering core engine classes.
* Simple header interface in gdnative_interace.h
This makes Godot avoid distortion when resizing the window to an aspect
ratio that doesn't match the project's base aspect ratio.
Since this setting has no effect when the stretch mode is `disabled`
(the default), this won't impact projects not using the `canvas_items`
or `viewport` stretch modes.
WARNING: Hacks everywhere!
The logic in `main.cpp` is due a full rewrite as it's extremely hacky,
splitting argument parsing over several functions, with a mess of global state
and assumptions about what combinations of arguments or lack thereof should
mean in terms of what we want to read: game, editor, project manager, or
command line tools such as `--doctool`, `--export` or `--script`.
Until this is fully rewritten, this patch hacks things some more to ensure
that we don't fall back to the project manager in cases where it's not
warranted, and especially not *too late*, as it can mean that we haven't
properly initialized stuff like `EditorPaths` needed by the PM (which in turn
impacts what kind of path will be used for logs and the shader cache, etc...
the rabbit hole goes deep).
Fixes#41435.
Fixes#49392.
Fixes#49658.
Fixes https://github.com/godotengine/godot/issues/38202#issuecomment-773158477.
- EditorSettings: Ensure that `create()` makes a valid singleton.
Fixes#49179, fixes#49450.
- EditorPaths: Cleanup code, properly set `paths_valid`.
- EditorPaths: Move more paths validation (check, mkdir) from
EditorSettings for a better separation of concerns.
- EditorPaths: Move EditorFileSystem creation of `.godot/imported`
next to other paths.
Physics FPS above 1000 cause the whole project to slow down
and are not very practical in the first place (since no CPU currently
available can keep up).
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
- Tweak the setting property hint to be more informative.
- Make the setting a "basic" setting so it appears when Advanced Settings
is disabled.
- Remove redundant orientation setting in the iOS export preset.
The project setting is now used (like on Android).
Projects upgrading from a previous version will have to set the
screen orientation again in the Project Settings if it wasn't set
to the default value ("landscape").
The "Anisotropic" term is abbreviated as spelling it out would cause
the PopupMenu to overflow the editor window when using the default
inspector width.
- Display the frame time in addition to FPS.
- Frame time is a more objective measurement in comparison to FPS,
but FPS is more familiar to people less acquainted with profiling.
- Rename "Game" to "Project" for the project FPS printing line.
This adds the ability to add overrides for built-in actions (i.e. ui_*) in the editor. Also added a number of additional built-in actions for various text-related actions, gui-generic actions (like copy and paste) and graph-related actions (duplicate nodes), etc. Moved the definition of input actions to input_map, rather than in project_settings so the editor can make use of these actions as well.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
In addition, add support for scaling and applying filter to the splash screen on Android.
One limitation of the api being used is that the splash screen aspect ratio is not maintained when it's scaled up.
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
This ensures that settings like `gui/theme/custom_font` handle resource
remappings properly, as they load resources in `register_scene_types()`.
Path remaps used to be done before loading scene types in early Godot
versions (as hinted by the "Load Remaps" comment just before "Load Scene
Types") but this was broken when developing new localization features.
Fixes#17640.
Which can be used by language bindings to generate code statically. This
is generated as a different file from the class API because it has
different requirements (the builtin types have constructors and don't
have signals), so bindings can better make use of each JSON file without
extra parsing.
This also cleans up a bit the old API generator, mainly initializing
structs and renaming "instanciable" to the more correct "instantiable".
The argument description in help text was updated to better reflect how
it should be used. The <path> argument is mandatory.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
-All shadow rendering is done with raster now (no compute)
-All shadow rendering is done by rendering directly to the shadow atlas
-Improved how buffer clearing is done to optimize the above.
-Ability to set shadows as 16 bits.
-SDFGI direct light is done over many frames
-SDFGI Changed settings for rays/frame
-SDFGI Misc optimizations
-SDFGI Bug fix on probe scroll
-GIProbe was not working, got it to work again
-GIProbe dynamic objects were not working, fixed
-Added a half size GI option.
- Based on C++14's `shared_time_mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
When a project setting is not found, a warning message is printed.
This moves the default value declaration so it can be found when
the `--help` or `--version` command line arguments are used.
Rémi Verschelde
Pawel Lampe
Rémi Verschelde
Bastiaan Olij
Aaron Franke
bruvzg
Hugo Locurcio
Paulb23
Jacob Edie
Juan Linietsky
Manuel Moos
Wilson E. Alvarez
Fabio Alessandrelli
Lyuma
Michael Alexsander
Anilforextra
Pedro J. Estébanez
Hendrik Brucker
Lightning_A
totlmstr
George Marques
Anshul7sp1
Johannes
Mateo Kuruk Miccino
Emmanuel Leblond
Andrii Doroshenko (Xrayez)
Eric M
Fredia Huya-Kouadio
Marcel Admiraal
Thakee Nathees