Antialiasing cannot be adjusted on fonts rendered with MSDF.
Internally, Godot always uses grayscale antialiasing for those fonts.
This also tweaks property hints for consistency, and renames
uses of "sub-pixel" to the more commonly used "subpixel".
- Removed empty paragraphs in XML.
- Consistently use bold style for "Example:", on a new line.
- Fix usage of `[code]` when hyperlinks could be used (`[member]`, `[constant]`).
- Fix invalid usage of backticks for inline code in BBCode.
- Fix some American/British English spelling inconsistencies.
- Other minor fixes spotted along the way, including typo fixes with codespell.
- Don't specify `@GlobalScope` for `enum` and `constant`.
This preset uses a fully black background to reduce power usage on OLED
displays, leading to increased battery life on laptops with OLED displays.
This preset is also useful for late night sessions, as OLED displays
have a near-infinite contrast ratio.
This also adds a Draw Extra Borders editor setting which draws borders
around some interactive nodes. This setting is required for good
usability of a theme with a fully black background.
Visibility of disabled text (including unselected tab names) has been
slightly increased for better accessibility, regardless of the editor
theme preset in use.
The position (left/right) of the Cancel and OK buttons in AcceptDialog
are DisplayServer specific, as Windows uses OK/Cancel and macOS uses Cancel/OK.
Linux/X11 currently uses the macOS convention which is also the GTK+/GNOME one,
though it's not consistent with Qt/KDE applications which follow the Windows
convention.
Since that can't satisfy everyone, it's best if it's configurable also for the
editor (it's already configurable for the project).
Fixes#59379.
Removes separate `Command` key (use `Meta` instead).
Adds an event flag to automatically remap `Command` <-> `Control` (cannot be set alongside `Control` or `Meta`).
The new default value (1800) allows storing 30 seconds of profiling
at 60 FPS.
The new maximum value (10000) allows storing about 3 minutes of
profiling at 60 FPS.
The profiler graph will scale accordingly to the chosen setting,
so the default value is kept relatively low to prevent the graph
from looking too squished on narrow displays.
* Map is unnecessary and inefficient in almost every case.
* Replaced by the new HashMap.
* Renamed Map to RBMap and Set to RBSet for cases that still make sense
(order matters) but use is discouraged.
There were very few cases where replacing by HashMap was undesired because
keeping the key order was intended.
I tried to keep those (as RBMap) as much as possible, but might have missed
some. Review appreciated!
Adds a new, cleaned up, HashMap implementation.
* Uses Robin Hood Hashing (https://en.wikipedia.org/wiki/Hash_table#Robin_Hood_hashing).
* Keeps elements in a double linked list for simpler, ordered, iteration.
* Allows keeping iterators for later use in removal (Unlike Map<>, it does not do much
for performance vs keeping the key, but helps replace old code).
* Uses a more modern C++ iterator API, deprecates the old one.
* Supports custom allocator (in case there is a wish to use a paged one).
This class aims to unify all the associative template usage and replace it by this one:
* Map<> (whereas key order does not matter, which is 99% of cases)
* HashMap<>
* OrderedHashMap<>
* OAHashMap<>
This brings the level of line spacing closer to what it was like
in Godot 3.x, which improves usability on small displays.
This also decreases the default line spacing for fixed-width texts
in the About dialog (license text).
HTTPClientTCP expects proxy host to be empty or port to be -1 to ignore
the proxy. When getting the proxy config from the settings file, the
values will default to U"null" and 0, respectively, making HTTPClientTCP
to attempt to use the values as a proxy, which causes getaddrinfo to
fail looking up a "null" hostname.
Setting the default config values seems like a good approach to prevent
this issue.
Fixes#59037
`DirAccess *` needs to be deleted manually, and this is often forgotten
especially when doing early returns with `ERR_FAIL_COND`.
`DirAccessRef` is deleted automatically when it goes out of scope.
Co-authored-by: bruvzg <7645683+bruvzg@users.noreply.github.com>
Removes some unnecessary includes from `editor_node.h`, and instead add
those where they're used.
Removes unnecessary `editor_node.h` includes in various editor classes.
Renames `dynamicfont` to `dynamic_font` in a couple files.
Misc cleanup while jumping through that rabbit hole.
Always build with the GUI subsystem.
Redirect stdout and stderr output to the parent process console.
Use CreateProcessW for blocking `execute` calls with piped stdout and stderr (prevent console windows for popping up when used with the GUI subsystem build, and have more consistent behavior with `create_process`).
Add `open_console` argument to the `execute` and `create_process` to open a new console window.
Remove `interface/editor/hide_console_window` editor setting.
Remove `Toggle System Console` menu option.
Remove `set_console_visible` and `is_console_visible` functions.
* Adds `indent(str)` to `String`:
* Indent the (multiline) string with the given indentation.
* This method is added in order to keep the translated XML correctly
indented.
* Moves the loading of tool/doc translation into
`editor/editor_translation.{h,cpp}`.
* This will be used from both `EditorSettings` and the doc tool from
`main`.
* Makes use of doc translation when generating XML class references, and
setup the translation locale based on `-l LOCALE` CLI parameter.
The XML class reference won't be translated if `-l LOCALE` parameter is
not given, or when it's `-l en`.
This feature is enabled by default, but it can be disabled in the editor
settings in case it interferes with other uses of the extra buttons
(such as push-to-talk in a VoIP program).
The default orbit sensitivity was decreased to account for this change.
Rotational inertia (orbit + freelook) was disabled by default due to
known issues.
This also removes the need for separate manipulation inertia settings,
as the default settings are more responsive.
Having a property which has the same name as its class leads to confusing
situations (e.g. `BaseButton` has a `shortcut` property of type `Shortcut`
which has a `shortcut` property of type `InputEvent`).
Also renames `is_event` to `matches_event`, and `is_valid` to `has_valid_event`
to better reflect what the methods check.
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
* This PR adds the ability to disable classes when building.
* For now it's only possible to do this via command like:
`scons disable_classes=RayCast2D,Area3D`
* Eventually, a proper UI will be implemented to create a build config file to do this at large scale, as well as detect what is used in the project.
- EditorSettings: Ensure that `create()` makes a valid singleton.
Fixes#49179, fixes#49450.
- EditorPaths: Cleanup code, properly set `paths_valid`.
- EditorPaths: Move more paths validation (check, mkdir) from
EditorSettings for a better separation of concerns.
- EditorPaths: Move EditorFileSystem creation of `.godot/imported`
next to other paths.
This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
The Adaptive text editor theme is the default, and has therefore
been renamed Default for consistency with the Default theme preset.
It keeps its automatic dark/light switch status.
The Default text editor theme was actually a legacy Godot 2-style theme,
so it has been renamed to Godot 2 to match the theme preset.
Its background color has been changed to be a constant opaque color,
since the new editor theme made the theme look less good on a translucent
background. The previous background color on light theme also lacked
contrast.
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
When using a negative contrast value, the base color will be lightened
to create the derivative colors instead of being darkened.
This can lead to better-looking themes, especially for light themes.
The editor theme now makes use of rounded corners and less borders
to follow modern visual trends.
The default theme's colors were also tweaked to make the blue hue
more subtle (similar to the Arc theme, which was removed as a
consequence). The Alien theme was replaced by a Breeze Dark theme,
which should blend in well with the KDE theme.
This provides better power savings compared to the previous value.
This also speeds up project execution slightly while the editor
is running in the background.
The setting hint can now go as low as 1 FPS (1 million microseconds
per frame), for those who really need the best possible power savings.
This will make previewing animated shaders or particles impossible
when the editor window isn't focused though.
This adds the ability to add overrides for built-in actions (i.e. ui_*) in the editor. Also added a number of additional built-in actions for various text-related actions, gui-generic actions (like copy and paste) and graph-related actions (duplicate nodes), etc. Moved the definition of input actions to input_map, rather than in project_settings so the editor can make use of these actions as well.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
With smaller arrays/dictionaries, this makes it possible to view all of
an array/dictionary's items on a single page.
Larger values could be used, but make switching between node selections
quite slow, especially on low-end CPUs. They could also be problematic
with complex resource inspectors for arrays/dictionaries that contain
Resources.
This closes https://github.com/godotengine/godot-proposals/issues/2058.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
As a bonus, to have consistency between use Beziers and create insert tracks, use Beziers also gets a default via editor settings that is used when the confirmation dialog is disabled, instead of just falling back to creating non-Bezier tracks.
This makes it possible to view far away objects without
having to tweak any settings. This results in a more usable
editor when working on large-scale levels.
This change should have no impact on performance, but note that
Z-fighting will be visible at a distance. This can be made less
visible by increasing the Znear value (however, doing so will cause
nearby surfaces to disappear).
This change was also applied to the editor, but it will only
apply to newly created scenes.
This also changes the default camera settings in the glTF importer
to match the Camera node's defaults.
The code we had for PVRTexTool doesn't work as it's not compatible with current
PVRTexTool CLI options, and likely hasn't been for years.
Instead, we have our own vendored pvrtccompressor thirdparty library which all
users have thus de-facto been using. This commit moves the compress code to
`modules/pvr` where it belongs.
There's no proper compress function for PVRTC 2-bit format, that's a bug that
will need to be fixed (currently it's compressed as 4-bit format even if you
use Image::FORMAT_PVRTC2).
Fixes#28669.
- Extacted all syntax highlighting code from text edit
- Removed enable syntax highlighting from text edit
- Added line_edited_from signal to text_edit
- Renamed get/set_syntax_highlighting to get/set_syntax_highlighter
- Added EditorSyntaxHighligher
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Rémi Verschelde
Hugo Locurcio
VolTer
kobewi
bruvzg
Fabio Alessandrelli
Micky
Aaron Franke
Rémi Verschelde
Yuri Sizov
Yuri Sizov
Sean Kim
Alfred R. Baudisch
MinusKube
ConteZero
Hendrik Brucker
Aaron Record
reduz
Fredia Huya-Kouadio
jmb462
Haoyu Qiu
Tais P. Hansen
Michael Alexsander
Eric M
Anilforextra
fabriceci
luz paz
Nathan Franke
Gilles Roudière
Paulb23
nonunknown
Angad Kambli
TwistedTwigleg
Marcel Admiraal
Ansraer
Pedro J. Estébanez
Rafał Mikrut
Rafał Mikrut
HaSa1002
1abinitio1