A regression had occurred whereby particle systems in DYNAMIC mode weren't added to the room correctly.
This PR recognise the case and bypasses the function to retrieve geometry, as retrieving the geometry is not necessary for DYNAMIC objects as they should not affect the room bound. Their AABB will be retrieved during gameplay rather than once off at level conversion.
When editor continuous redraws is switched off, the editor only redraws when a redraw_request was issued by an element in the scene. This works well in most situations, but when scenes have dynamic content they will continuously issue redraw_requests.
This can be fine on high power desktops but can be an annoyance on lower power machines.
This PR splits redraw requests into high and low priority requests, defaulting to high priority. Requests due to e.g. shaders using TIME are assigned low priority.
An extra editor setting is used to record the user preference and an extra option is added to the editor spinner menu, to allow the user to select between 3 modes:
* Continuous
* Update all changes
* Update vital changes
Change the entire navigation system.
Remove editor prefix from nav mesh generator class. It is now used for baking
at runtime as well.
Navigation supports obstacle avoidance now with the RVO2 library.
Nav system will also automatically link all nav meshes together to form one
overall complete nav map.
Applying overlay materials into multi-surface meshes currently
requires adding a next pass material to all the surfaces, which
might be cumbersome when the material is to be applied to a range
of different geometries. This also makes it not trivial to use
AnimationPlayer to control the material in case of visual effects.
The material_override property is not an option as it works
replacing the active material for the surfaces, not adding a new pass.
This commit adds the material_overlay property to GeometryInstance
(and therefore MeshInstance), having the same reach as
material_override (that is, all surfaces) but adding a new material
pass on top of the active materials, instead of replacing them.
Implemented in rasterizer of both GLES2 and GLES3.
Previously a crude metric was used to decide on the roaming expansion margin, but it created unexpected results in some scenarios. Instead this setting is exposed to the user via the RoomManager, allowing them to tailor it to the world size, room sizes, roaming objects sizes and the speeds of movement.
Reporting rest collision information is needed for move_and_collide and
move_and_slide so floor detection can be done properly, but in the case
of just testing the motion for collision, it makes sense to return false
if the body is able to move all along the path without being stopped.
Updated the logic in test_move and clarified the documentation for
test_move and move_and_collide.
In all physics servers, body_get_direct_state() now silently returns
nullptr when the body has been already freed or is removed from space,
so the client code can detect this state and invalidate the body rid.
In 2D, there is no change in behavior (just no more errors).
In 3D, the Bullet server returned a valid direct body state when the
body was removed from the physics space, but in this case it didn't
make sense to use the information from the body state.
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
Some split distance properties are unused depending on the
current shadow mode. Also, Blend Splits and Bias Split Scale can
only be used if the shadow mode is PSSM 2 Splits or PSSM 4 Splits.
Add new error type to BakeError to signalise that there is no root node to
start baking from.
Document the new error type, as well as BAKE_ERROR_NO_LIGHTMAPPER.
When switching the mesh at runtime, the physics server wasn't properly
updated with the new mesh. Now we keep track of the soft body mesh to
make sure everything is properly initialized on pre-draw.
Also cleaned a few things around private methods.
Fix some typoed names from the doc
Add _index to "index" parameters of *_shape_* signals, this is both in doc and in the template. This makes the code, signature and doc easier to understand
Add method to get Node from the _index params of those signals. This was not as easy to find as one would expect. Putting this information where it is needed will help.
In case the reference is stored in script, create a new instance to
avoid overriding the previous values.
Otherwise, re-use the reference as before to avoid extra allocations.
The icon was present in `editor/icons/`, but it was never implemented
in the editor gizmos code.
This also removes some unused gizmo drawing code (overridden methods
that are no longer called anywhere).
When converting portal meshes during import, indices were not being taken into account, which could lead to incorrect estimation of the portal direction. This PR now copes with either indexed or non-indexed portal meshes.
Added a bug fix to cope with portals pointing almost directly straight up or down, which could cause problems with the lookat transform.
Added the ability for named portals to link to short room names (in addition to postfix room names).
The PVS mode enum had been declared using scope operator, which does not seem to work correctly from GDScript with the BIND_ENUM_CONSTANT macro.
This PR removes the scope operator in the declaration.
For both 2D and 3D, three methods are added:
- `get_floor_angle` on `KinematicBody` to get the floor angle.
- `get_angle` on `KinematicCollision` to get the collision angle.
- `get_last_slide_collision` to quickly get the latest collision of `move_and_slide`.
Update mesh_surface_get_format_stride and
mesh_surface_make_offsets_from_format to return an array of offsets and
an array of strides in order to support vertex stream splitting
Update _get_array_from_surface to also support vertex stream splitting
Add a condition on split stream usage to ensure it does not get used on
dynamic meshes
Handle case when Tangent is compressed but Normal is not compressed
Make stream splitting option require a restart in the settings
Update SoftBody and Sprite3D to support and use strides and offsets
returned by updated visual_server functions
Update Sprite3D to use the dynamic mesh flag
Add framework for supporting geometrical occluders within rooms, and add support for sphere occluders.
Includes gizmos for editing.
They also work outside the portal system.
Applying the platform velocity when leaving the platform floor should be
done after snapping to keep things consistent.
Now it's done in both 2D and 3D, as it's already done in 2D on master.
Same thing that was already done in 2D, applies moving platform motion
by using a call to move_and_collide that excludes the platform itself,
instead of making it part of the body motion.
Helps with handling walls and slopes correctly when the character walks
on the moving platform.
Also made some minor adjustments to the 2D version and documentation.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
When synchronizing KinematicBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
Fixed a bug in the complex PVS generation which was causing recursive loop.
Move some of the settings out of RoomManager into Project Settings.
Allow PVS generation method to be selected from Project Settings, and control PVS logging.
The checking for link room IDs was checking for less than size(), but was not correctly checking for -1,
and therefore reading outside the array range. This PR fixes this.
Portal autolinking was previously agnostic to room priorities, which meant that portals would link to the first room they found (often outside rooms). This PR fixes this by making the autolinking priority aware, and will preferentially link to internal rooms.
Fixes a bug whereby it read from the primary PVS in the gameplay monitor, using the size from the secondary PVS. This would read out of bounds and crash.
Removed debug code to update the gameplay monitor from the preview camera - this is no longer required.
Temporarily revert to the simple PVS generation method, because I've noticed a bug in the complex version, and the simple version is safer while I fix this.
Calling rooms_set_active with TOOLS_ENABLED from a running project resulted in a crash because the Spatial Editor is not available. Wrapped it in an is_editor_hint.
In response to user demand, the naming convention for importing levels from blender etc is changed from prefixes `Room_` and `Portal_` to postfixes `-room`, `-roomgroup`, `-portal`.
The use of special prefixes is only actually required during the import phase - the first conversion of rooms, roomgroups, and portals from Spatials and MeshInstances (based on the workflow of importing from blender).
Once converted to the native Godot nodes there is no longer a need for the naming requirements.
This PR removes the requirements except for the import. Manual portal linking after the initial conversion is now done exclusively using the `linked_room` nodepath property of the Portal.
This PR makes the 'convert rooms' button permanently on the toolbar and accessible whichever node is selected, so you can convert rooms without having to select the RoomManager first.
It also adds a togglable item 'view portal culling' to the 'View' menu which is a simple way of setting the RoomManager 'active' setting without the RoomManager being the selected node.
Both of these have keyboard shortcuts, which should make it much faster to reconvert rooms and edit.
In addition there the string in the 'Perspective' Listbox is modified to show [portals active] when portal culling is operational, for visual feedback. This is updated when you change modes, and when the rooms are invalidated.
Implement Octahedral Compression for normal/tangent vectors
*Oct32 for uncompressed vectors
*Oct16 for compressed vectors
Reduces vertex size for each attribute by
*Uncompressed: 12 bytes, vec4<float32> -> vec2<unorm16>
*Compressed: 2 bytes, vec4<unorm8> -> vec2<unorm8>
Binormal sign is encoded in the y coordinate of the encoded tangent
Added conversion functions to go from octahedral mapping to cartesian
for normal and tangent vectors
sprite_3d and soft_body meshes write to their vertex buffer memory
directly and need to convert their normals and tangents to the new oct
format before writing
Created a new mesh flag to specify whether a mesh is using octahedral
compression or not
Updated documentation to discuss new flag/defaults
Created shader flags to specify whether octahedral or cartesian vectors
are being used
Updated importers to use octahedral representation as the default format
for importing meshes
Updated ShaderGLES2 to support 64 bit version codes as we hit the limit
of the 32-bit integer that was previously used as a bitset to store
enabled/disabled flags
If the user changed the portal Z scale in the editor the portal margin display could become incorrectly sized.
This is because the portal margin is measured in world space units, and has to be back calculated into model space using the inverse global transform of the portal node. The model space size of the margin is thus tied to the current scale of the node.
This PR forces updating the gizmo each time the transform is changed. This isn't super efficient, but as this is an editor only feature it should be okay, and it is unlikely to be a performance problem.
Due to a quirk in CSG Shapes, updating is usually deferred to the next frame. This is problematic as we need to read back the geometry on the first frame when converting levels.
This PR adds a function to CSGShape to force immediate updating (if dirty), and calls it during room conversion.
The default autoplace algorithm places instances in the highest priority Room. It became apparent that there are some situations in which users will want to override this and force placement in a Room from a particular RoomGroup, especially an "outside" RoomGroup.
This setting allows the user to specify a preference for Room priority. When set to 0, the setting is ignored and the highest priority Room is chosen.
Although explicit portals did a check to detect internal portals, this check was missing from autolinked portals. This meant they were incorrectly clipping the room bounds of the enclosing outer room.
This PR adds a check for internal rooms during the autolinking and sets the internal flag where needed.
The default portal margin is stored in the RoomManager. Previously this was propagated to Portals when the value was changed, and Portals each stored this default value.
This caused a bug during loading, if the RoomManager was loaded before Portals, the value was never propagated.
This PR makes the default margin a static value stored in the RoomManager, and the Portals now read directly from the static value when required, and do not store locally. This gets around the problem.
Higher values will make indirect lighting brighter.
A value of 1.0 represents physically accurate behavior, but higher values
can be used to make indirect lighting propagate more visibly when using
a low number of bounces.
This can be used to speed up bake times by lowering the number of bounces
then increasing the bounce indirect energy. Unlike BakedLightmapData's
energy property, this property does not affect direct lighting
emitted by light nodes or emissive materials.
Due to an oversight in the autoplace recursive search for static objects, static objects were getting added twice to the portal renderer, which meant they were being rendered twice, lowering performance.
This PR corrects this horrendous error.
Allows users to have the RoomManager as the roomlist.
Fixes a couple of bugs dealing with situations where users attempt to link Portals to Rooms outside the roomlist.
Adds a PortalEditorPlugin allowing you to flip individual portals.
In order to make level building easier, the system can now support STATIC and DYNAMIC objects in the roomlist that are not placed in rooms. The system will automatically place them in the appropriate room.
* Safe and unsafe motion are calculated by dichotomy with a limited
number of steps. It's good for performance, but on long motions that
either collide near the beginning or near the end, the result can be
very imprecise.
* Now a factor 0.25 or 0.75 is used to converge faster when this case
happens, which allows longer motions to get more accurate collision
detection.
* Makes snap collision more precise, and helps with cases where diagonal collision on the border of a platform can lead to the character being stuck.
Additional improvements to move_and_slide:
* Handle slide canceling in move_and_collide with 0 velocity instead of
not applying it.
* Better handling of snap with custom logic to cancel sliding.
* Remove small jittering when using stop on slope, by canceling the
motion completely when the resulting motion is less than margin instead
of always projecting to the up direction (in both body motion and snap).
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
- Specular can now be set above 1.0.
- Some properties now allow more precise values.
- The Bake Mode property hint was changed to be more descriptive.
- The maximum shadow bias values were adjusted to follow the property
hints in `master`.
It turned out the new autolinking feature was linking portals AFTER the static meshes had been added to rooms in the PortalRenderer. This meant that large meshes weren't being sprawled across these portals. The fix involves doing the autolinking BEFORE adding the static meshes.
Fixes a bug in the warning for portals being in the wrong direction, they should have only been checkout for outgoing portals. This was resulting in erroneous warnings.
Also the room conversion logs are refined to be more compact and informative.
A warning icon is also added in the gizmo for portals where autolink fails.
Clean: remove duplicate and interior vertices (uses Bullet algorithm)
Simplify: modify the geometry for further simplification (uses VHACD
algorithm)
In the editor, single convex hull now uses the clean option.
Added a new editor entry to create a simplified convex hull, can be
useful for creating convex hull from highly tessellated triangle meshes.
Specific change for 3.x:
Add support for Vector<Vector3> and PoolVector<Vector3> in the convex hull generator.
