This makes property casing consistent with the editor.
If property capitalization is disabled in the Editor Settings,
the remote inspector will also disable capitalization.
(cherry picked from commit 854f328517)
This makes setting up AudioStreamPlayer3D nodes for Doppler playback
a bit easier.
- Move AudioStreamPlayer3D's Doppler Tracking property outside a group
since the group only had 1 property, which resulted in unnecessary
folding in the inspector.
- Put the AudioStreamPlayer3D Playing and Autoplay properties higher up
in the inspector since these are likely to be modified often.
The icon was present in `editor/icons/`, but it was never implemented
in the editor gizmos code.
This also removes some unused gizmo drawing code (overridden methods
that are no longer called anywhere).
The default orbit sensitivity was decreased to account for this change.
Rotational inertia (orbit + freelook) was disabled by default due to
known issues.
This also removes the need for separate manipulation inertia settings,
as the default settings are more responsive.
This is already supported by FreeType, but it wasn't exposed.
Adding support for WOFF2 would require linking a Brotli decompression
library in Godot, so only WOFF1 is exposed here.
- Display the scene name, then the project name, then "Godot Engine".
- Display the "modified" mark before anytihng else.
Both of these changes ensure important, project-specific elements
can always be seen in the task bar which may truncate strings due to
its low per-item width.
- Use "Unnamed Project" if the project has no name (similar to the
Project Manager).
- Allow snapping bezier handles to the timeline.
- Allow precise snapping when holding Shift for keyframes and handles.
- Previously, it was only allowed for seeking the timeline.
- This change also impacts the animation track editor,
not just the bezier editor.
- Invert the Ctrl + mouse wheel behavior to match the zoom direction
in the animation track editor.
- Increase the line spacing between the "Time:" and "Value:" texts
to improve readability.
- Tweak box selection styling to match the animation track editor.
- Adjust line widths for hiDPI displays.
(cherry picked from commit 4a4d977bea)
When using non-English UI, there were `Index p_idx = -1 is out of bounds (items.size() = 2).`
errors on on startup if any text file is open in the script editor. And clicking the Standard
highlighter option does not check that menu item.
This is caused by `TextEditor` searching for that menu item with unlocalized text. As already
did in `ScriptTextEditor`, this PR stores and searches for menu item with `TTR`ed text.
* Make Undo/Redo menu items disabled when clicking it does nothing.
* Context menu of `TextEdit`
* Context menu of `LineEdit`
* Editor's Scene menu
* Script editor's Edit menu and context menu (for Script and Text)
* Make editor undo/redo log messages translatable.
* Mark `UndoRedo`'s `has_{un,re}do()` methods as `const`.
* Expose `TextEdit`'s `has_{un,re}do()` to scripts since `{un,re}do()` are already available.
Add framework for supporting geometrical occluders within rooms, and add support for sphere occluders.
Includes gizmos for editing.
They also work outside the portal system.
Updating continuously should only be enabled for troubleshooting
purposes, as it uses a lot of CPU/GPU power.
The update spinner is now displayed in red when the Update Continuously
editor setting is enabled.
(cherry picked from commit a97c5b50db)
For the time being we don't support writing a description for those, preferring
having all details in the method's description.
Using self-closing tags saves half the lines, and prevents contributors from
thinking that they should write the argument or return documentation there.
(cherry picked from commit 7adf4cc9b5)
This pull request fixes an issue where the "View" menu in the 3D view toolbar would close when you selected either the "View Origin" or "View Grid" checkboxes. This was inconvenient and wasted time by making you have to reopen the menu in order to get to other settings anytime you changed this.
(cherry picked from commit 3ffd75107d)
This pull request fixes an issue where searches using the "Find in Files" function would include folders with `.gdignore` files in them. The editor is supposed to ignore directories with these files in them altogether.
(cherry picked from commit 658b152bd8)
- Use the ° symbol instead of "deg" to reduce clutter.
- Round the displayed lengths to only one decimal instead of two
to further reduce clutter.
- Don't make the `px` suffix localizable, as it isn't localizable
anywhere else in the editor.
(cherry picked from commit 026aea681d)
I had forgotten to add a call to update_portal_tools() at the end of the SpatialEditor constructors. This ensures that the portal UI is off by default in normal use without portals.
This PR makes the 'convert rooms' button permanently on the toolbar and accessible whichever node is selected, so you can convert rooms without having to select the RoomManager first.
It also adds a togglable item 'view portal culling' to the 'View' menu which is a simple way of setting the RoomManager 'active' setting without the RoomManager being the selected node.
Both of these have keyboard shortcuts, which should make it much faster to reconvert rooms and edit.
In addition there the string in the 'Perspective' Listbox is modified to show [portals active] when portal culling is operational, for visual feedback. This is updated when you change modes, and when the rooms are invalidated.
This makes it easier to notice that some menu items only appear when
specific nodes are selected.
This change applies to both 2D and 3D editors, including both plugin-based
menus and the hardcoded 2D layout/animation contextual menus.
- Now able to display up to 32 layers in physics (still 20 for render)
- Adjustable grid size to fit available space in dock
- Expansion icon to display more layers vertically
- Layer numbers in cells to help with selection
Implement Octahedral Compression for normal/tangent vectors
*Oct32 for uncompressed vectors
*Oct16 for compressed vectors
Reduces vertex size for each attribute by
*Uncompressed: 12 bytes, vec4<float32> -> vec2<unorm16>
*Compressed: 2 bytes, vec4<unorm8> -> vec2<unorm8>
Binormal sign is encoded in the y coordinate of the encoded tangent
Added conversion functions to go from octahedral mapping to cartesian
for normal and tangent vectors
sprite_3d and soft_body meshes write to their vertex buffer memory
directly and need to convert their normals and tangents to the new oct
format before writing
Created a new mesh flag to specify whether a mesh is using octahedral
compression or not
Updated documentation to discuss new flag/defaults
Created shader flags to specify whether octahedral or cartesian vectors
are being used
Updated importers to use octahedral representation as the default format
for importing meshes
Updated ShaderGLES2 to support 64 bit version codes as we hit the limit
of the 32-bit integer that was previously used as a bitset to store
enabled/disabled flags
- Use background and line colors that match better with the
rest of the editor.
- Use translucent lines to make overlapping lines visible.
- Tweak the error message to mention the UV layer in question
when there is no UV for a defined layer.
(cherry picked from commit 8cdfd2e706)
- Allow some tolerance when clicking the plane move/scale,
even if the click is actually slightly outside the plane
(similar to Blender).
- Make the rotate manipulation circles visually thinner to be
less distracting.
- Make the hovered color less saturated to be more distinguishable
from the non-hovered state.
- Don't set brightness above 1.0 to prevent the gizmo from glowing
when hovered.
(cherry picked from commit 6cfcbbbb93)
- Makes tips clearer and more consistent.
- Removes outdated "shift+v" that doesn't work
- Adds Ctrl+RMB for adding nodes at position
- Removes tip for non-existent Alt+Drag in 3D select tool
(cherry picked from commit 6b90e2df6c)
This also changes the display mode tooltips to reflect the fact that
times are now displayed in milliseconds instead of seconds.
(cherry picked from commit e837e04ef8)
A Camera node still has to be selected to initially enable camera
preview, but another node can then be selected and the preview can
be disabled by pressing the shortcut key again.
`localhost` was removed as it won't work out of the box. It can be added
by the user if they're working on the asset library itself.
This won't affect existing installations due to how the editor settings
are stored, but existing installations will keep working fine.
(cherry picked from commit eac8ba6ce8)
Allows users to have the RoomManager as the roomlist.
Fixes a couple of bugs dealing with situations where users attempt to link Portals to Rooms outside the roomlist.
Adds a PortalEditorPlugin allowing you to flip individual portals.
* If not present, the dialog asks to load build sources from a file.
* The export templates check now also verifies that build sources are installed and skips the template check.
This makes Android development easier.
(cherry picked from commit 6639cc9853)
* It seems both cell_selected and multi_selected were being triggered,
* This caused inspector updating twice.
* cell_selected connection and callback were removed.
Co-authored-by: Juan Linietsky <reduzio@gmail.com>
- Implement timeline scrobbling using Alt + Mouse wheel anywhere in the
animation track editor.
- Snap settings are followed, and precise snapping can be obtained by also
holding down Shift.
- This modifier wasn't used by anything in the animation editor.
- Allow zooming by using Ctrl + Mouse wheel on the timeline itself.
- Previously, this was only possible on the track area, not the timeline.
- Focus the project search box when switching from the Templates tab
back to the Projects tab in the project manager.
- Add a context-specific placeholder for the asset library search box.
- Rename "Search" project filter box placeholder to the more
descriptive "Filter projects". When performing a search on an
existing selection, "Filter" is more accurate than "Search".
- Add 1-5 shortcuts to zoom between 100% and 1600% quickly
(similar to GIMP).
- When holding down Alt, go through integer zoom values if above 100%
or fractional zoom values with integer denominators if below 100%
(50%, ~33.3%, 25%, …).
It turned out the new autolinking feature was linking portals AFTER the static meshes had been added to rooms in the PortalRenderer. This meant that large meshes weren't being sprawled across these portals. The fix involves doing the autolinking BEFORE adding the static meshes.
Fixes a bug in the warning for portals being in the wrong direction, they should have only been checkout for outgoing portals. This was resulting in erroneous warnings.
Also the room conversion logs are refined to be more compact and informative.
A warning icon is also added in the gizmo for portals where autolink fails.
- To make things easier to follow, display the asset name in
confirmation dialogs.
- Display the number of conflicting files in the asset extraction dialog.
This reduces the number of clicks required to install an asset.
(cherry picked from commit 2708fcf13d)
Allows to see version diffs without having to expand the bottom panel
manually when clicking on a changed file in the "Commit" dock.
(cherry picked from commit 0fce7aea88)
Clean: remove duplicate and interior vertices (uses Bullet algorithm)
Simplify: modify the geometry for further simplification (uses VHACD
algorithm)
In the editor, single convex hull now uses the clean option.
Added a new editor entry to create a simplified convex hull, can be
useful for creating convex hull from highly tessellated triangle meshes.
Specific change for 3.x:
Add support for Vector<Vector3> and PoolVector<Vector3> in the convex hull generator.
Now the process uses a Map to lookup node pointers instead of iterating
over all modified node paths in a list and comparing them for each
property to check.
The process also avoids checking properties with empty node paths and
does an early exit on deleted nodes to avoid checking the node and its
descendants.
Also made a minor change in NodePath::rel_path_to() to avoid resizing a
Vector many times for long paths (with copy-on-write each time). Now
it's down to 2 resize calls in any case.
This is already allowed when using cinematic preview, but not
when previewing a Camera3D the usual way.
Many operations from the View menu still work while previewing
a camera, such as switching between debug draw modes and toggling
information panes.
(cherry picked from commit fab3d136e0)
Fix more cases of node path needing an update when nodes are renamed or
moved in the editor.
Built-in node properties:
Before, node paths were checked only for script export variables. Now
all properties are checked from the node, which includes built-in node
properties.
Allows proper node path updates for nodes like remote transform, physics
joints, etc.
Arrays and dictionaries:
Node paths nested in array and dictionary properties are now also
updated in the editor.
Also update the documentation to be clear about node path update in the
editor and at runtime.
Co-authored-by: latorril <latorril@gmail.com>
(cherry picked from commit 3e4e530523)
The 2D editor grid toggle shortcut has been changed to use
`KEY_MASK_CMD` for consistency. This means it will now use Cmd
on macOS instead of Ctrl.
(cherry picked from commit 2cc053c64b)
Remove early returns from `EditorNode3DGizmo::intersect_ray` that is preventing to have gizmos that use Mesh collision + Segment collision + Icon.
(cherry picked from commit 2c12297ee1)
