- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
This removes hardcoded actions from things like LineEdit and TextEdit.
Previously, things like copy, paste, etc were all hardcoded to Ctrl+C, Ctrl+V, etc. They could not be changed. This allows the possibility of them being changed, by making them use the action map. This has the added benefit of greatly simplifying the input handling logic in those controls. The logic which was previously in a huge and hard to follow switch statement has been extracted to individual methods.
This adds the ability to add overrides for built-in actions (i.e. ui_*) in the editor. Also added a number of additional built-in actions for various text-related actions, gui-generic actions (like copy and paste) and graph-related actions (duplicate nodes), etc. Moved the definition of input actions to input_map, rather than in project_settings so the editor can make use of these actions as well.
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
* Add support for decimal numeric entities to String::xml_unescape
* Add more error checks to String::xml_unescape
* Refactor XMLParser to use String::xml_unescape instead of an internal
implementation
This can be used to ensure a file has its contents saved
even if the project crashes or is killed by the user
(among other use cases).
See discussion in #29075.
-Added a new method in Resource: reset_state , used for reloading the same resource from disk
-Added a new cache mode "replace" in ResourceLoader, which reuses existing loaded sub-resources but resets their data from disk (or replaces them if they chaged type)
-Because the correct sub-resource paths are always loaded now, this fixes bugs with subresource folding or subresource ordering when saving.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
Cylinder collision detection uses a mix of SAT and GJKEPA.
GJKEPA is used to find the best separation axis in cases where finding
it analytically is too complex.
Changes in SAT solver:
Added support for generating separation axes for cylinder shape.
Added support for generating contact points with circle feature.
Changes in GJKEPA solver:
Updated from latest Bullet version which includes EPA fixes in some
scenarios.
Setting a lower EPA_ACCURACY to fix accuracy problems with cylinder vs.
cylinder in some cases.
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
Channels that are inactive -or when playback has not started yet- will report -200 dB as their peak value (which is also the lowest value possible during playback).
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
Named color constants renamed to UPPERCASE. Unlike #41019, this PR
is complete and implements these changes in the simplest way possible.
Co-authored-by: Shivam Mukherjee <mshivam98@gmail.com>
- Based on C++14's `shared_time_mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
No longer use emscripten functions for gamepads, implement them as
library functions in library_godot_display.js instead.
This allows us to do a better job at "guessing" vendorId, productId, OS,
etc. thus allowing us to better find the remapping for the controller.
In the core input handling code we have checks to make sure that if axis
rapidly change sign we inject mid-points to release any pending inputmap
action.
The function though, did not correctly insert the mid-point causing
dpads mapped to an axis that behaves like tri-state buttons (-1,0,1) to
not be released correctly.
This commit fixes that by including in the check the case where the axis
swtiches from abs(1) to 0.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
This can be used to print thread IDs in logs. This can make it easier
to debug multi-threaded applications.
Co-authored-by: Khaos <khaos@khaos-coders.org>
To get counts of items before getting the list, which is useful for
GDNative so users can pre-allocate the buffer with the correct size
without having to get the list twice.
The calls to the BVH need to use the world space AABB, rather than local space for it to work. Also, update was not being called which is required to update the AABB as objects move.
-Much greater pairing/unpairing performance
-For now, using it for culling too, but this will change in a couple of days.
-Added a paged allocator, to efficiently alloc/free some types of objects.
As a bonus, to have consistency between use Beziers and create insert tracks, use Beziers also gets a default via editor settings that is used when the confirmation dialog is disabled, instead of just falling back to creating non-Bezier tracks.
-Based on Bullet Dbvh, has style and functional changes.
-Provides efficient pairing
-Needed to optimize rendering
-Needed to optimize physics
This PR is up for others to review the implementation.
-Happens on import by default for all models
-Just works (tm)
-Biasing can be later adjusted per node or per viewport (as well as globally)
-Disabled AABB.get_support test because its broken
Since we clone the environments to build thirdparty code, we don't get an
explicit dependency on the build objects produced by that environment.
So when we update thirdparty code, Godot code using it is not necessarily
rebuilt (I think it is for changed headers, but not for changed .c/.cpp files),
which can lead to an invalid compilation output (linking old Godot .o files
with a newer, potentially ABI breaking version of thirdparty code).
This was only seen as really problematic with bullet updates (leading to
crashes when rebuilding Godot after a bullet update without cleaning .o files),
but it's safer to fix it everywhere, even if it's a LOT of hacky boilerplate.
Added additional param to action related methods to test for exactness.
If "p_exact_match" is true, then the action will only be "matched" if the provided input event *exactly* matches with the action event.
Before:
* Action Event = KEY_S
* Input Event = KEY_CONTROL + KEY_S
* Is Action Pressed = True
Now:
You can still do the above, however you can optionally check that the input is exactly what the action event is:
* Action Event = KEY_S
* Input Event = KEY_CONTROL + KEY_S
* p_exact_match = True
* Is Action Pressed = False
* If the Input Event was only KEY_S, then the result would be true.
Usage:
```gdscript
Input.is_action_pressed(action_name: String, exact_match: bool)
Input.is_action_pressed("my_action", true)
InputMap.event_is_action(p_event, "my_action", true)
func _input(event: InputEvent):
event.is_action_pressed("my_action", false, true) # false = "allow_echo", true = "exact_match"
event.is_action("my_action", true)
```
We haven't had a proper implementation for COMPRESS_PVRTC2 (which is PVRTC1 2-bpp) in years,
so let's drop it instead of keeping a compress type which doesn't work.
The other enum values were renamed to clarify that our PVRTC2 and PVRTC4 are respectively
PVRTC1 2-bpp and PVRTC1 4-bpp. PVRTC2 2-bpp and 4-bpp are not implemented yet.
Instead of references. This is needed because those function pointers
are used in GDNative which needs to work with plain C, which doesn't
support passing parameters by reference.
Alternative to `_change_notify()` to be called from within C++ classes.
Achieves low-level consistency with scripting, where this method is
exposed for updating the editor (inspector) with new values.
- added `state` as a property to restore internal state of RNG;
- `get_seed()` returns last seed used to initialize the state rather than the current state.
Co-authored-by: MidZik <matt.idzik1@gmail.com>
- Avoid spaces in Mono log file names.
- Use a `.log` extension for Mono logs, just like non-Mono logs.
- Use periods to separate hours/minutes/seconds for non-Mono logs.
-Changed how mesh data is organized, hoping to make it more efficient on Vulkan and GLES.
-Removed compression, it now always uses the most efficient format.
-Added support for custom arrays (up to 8 custom formats)
-Added support for 8 weights in skeleton data.
-Added a simple optional versioning system for imported assets, to reimport if binary is newer
-Fixes #43979 (I needed to test)
WARNING:
-NOT backwards compatible with previous 4.x-devel, will most likely never be, but it will force reimport scenes due to version change.
-NOT backwards compatible with 3.x scenes, this will be eventually re-added.
-Skeletons not working any longer, will fix in next PR.
- Initialize Object pointer to nullptr so it's not used by mistake.
- When setting an Object check if it's a reference so refcounting works
as intended.
- ClassDoc added to GDScript and property reflection data were extracted
from parse tree
- GDScript comments are collected from tokenizer for documentation and
applied to the ClassDoc by the GDScript compiler
- private docs were excluded (name with underscore prefix and doesn't
have any doc comments)
- default values (of non exported vars), arguments are extraced from the
parser
- Integrated with GDScript 2.0 and new enums were added.
- merge conflicts fixed
Made InputEvent as_text() return a readable and presentable string. Added to_string() overrides for each which returns a 'debug-friendly' version which is not as presentable but provides more information and in a more structured fashion. Use as_text() for UI display scenarions and to_string() for debug cases
ptrcall is now also used to optimize calls in GDScript, on top of the existing
use by the GDNative and Mono modules.
It no longer makes sense to make it optional.
- Allow getting an opaque pointer, no matter the type (for ptrcall).
- Allow setting object pointer and id directly.
- Allow initializing the data given a type, to allow properly setting
return types on ptrcalls.
The validated getters were only setting the value without changing the
type, leading to wrong results. This uses the same path used for
methods to the same purpose.
Made serialization of Command optional. If command is serialized, Control (On Win/Linux) or Meta (on Mac) are not.
Example use case: You are on Windows and you set a shortcut to be Control + E. This would serialize as Command=true and Control=true. If you then run this project on Mac, you would need to press Command AND Control to activate the shortcut - which is not what is intended. Now, you can set store_command to true, and it will only serialize to Command = true (no Control serialized). On Windows, this means Control. On Mac, it means only command.
Copied relevant documentation from the original `@GDScript` built-ins,
which will likely be removed in a future commit.
Various fixups to `variant_utility.cpp` while working on this.
* Using C-style function pointers now, InternalMethod is gone.
* This ensures much better performance in typed code.
* Renamed builtin_funcs to utility_funcs, to avoid naming confusion
-Moved Expression to use this, removed its own.
-Eventually GDScript/VisualScript/GDNative need to be moved to this.
-Given the JSON functions were hacked-in, removed them and created a new JSONParser class
-Made sure these functions appear properly in documentation, since they will be removed from GDScript
The underscore prefix was used to avoid the conflict between the `RID` class
name and the matching enum value in `Variant::Type`.
This can be fixed differently by prefixing uses of the `RID` class in `Variant`
with the scope resolution operator, as done already for `AABB`.
-Discern between named, indexed and keyed
-Get direct access to functions for typed GDScript and GDNative bindings
-Small changes to some classes in order to work with the new setget binder
Rémi Verschelde
Pedro J. Estébanez
Eric M
bruvzg
reduz
Aaron Franke
JestemStefan
Henry Conklin
kobewi
Hugo Locurcio
PouleyKetchoupp
Gilles Roudière
kleonc
Rémi Verschelde
Marcel Admiraal
Fabio Alessandrelli
Sergey Minakov
Yuri Roubinsky
George Marques
Danil Alexeev
Vedat Günel
Andrii Doroshenko (Xrayez)
AndreaCatania
Joshua Dahl
Mai Lavelle
Maganty Rushyendra
Marcus Brummer
lawnjelly
Fredia Huya-Kouadio
Marco Cognetta
Theogen Ratkin
Jordan Schidlowsky
Brian Semrau
Andy Savage
Alf Kraus
Emmanuel Leblond
Rafał Mikrut
Thakee Nathees
jcgollnick
Jon Bonazza
Rafał Mikrut
Zae
Haoyu Qiu
Michael Alexsander