85cf99f28e
Deprecate ImmediateGeometry
...
* Removed entirely from RenderingServer.
* Replaced by ImmediateMesh resource.
* ImmediateMesh replaces ImmediateGeometry, but could use more optimization in the future.
* Sprite3D and AnimatedSprite3D work again, ported from Godot 3.x (though a lot of work was needed to adapt them to Godot 4).
* RootMotionView works again.
* Polygon3D editor works again.
2021-06-30 14:14:41 -03:00
a02620f3a5
Merge pull request #50009 from reduz/fix-suffixes-and-degrees
...
Fix editor suffixes and degrees conversion
2021-06-30 18:47:40 +02:00
5cbdc7a0ac
Add support for controlling physics nodes' behavior when disabled
...
New property disable_mode to set different behaviors:
Remove: remove from physics simulation
MakeStatic: change body mode to static (doesn't affect area and soft body)
KeepActive: do nothing
Extra change:
Handle disable/enable node state with specific notifications, in order
to differentiate global pause from disabled nodes.
2021-06-30 09:20:44 -07:00
75688772b3
Fix editor suffixes and degrees conversion
...
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
2021-06-30 12:38:25 -03:00
bcd1fc832f
Merge pull request #49901 from nekomatata/move-and-collide-fix-slide
...
Fix move_and_collide causing sliding on slopes
2021-06-30 02:18:01 +02:00
d07f7c8d25
Fixes to 2D viewport
...
* Editor 2D viewport now uses embedded subwindows (windows no longer pop up)
* Restored the ability to disable 3D on the 2D viewport (makes 3D not display on 2D when there is a camera on the scene)
2021-06-29 17:40:45 -03:00
76dc811c76
Merge pull request #49470 from levilindsey/master
...
Update File.store_var description to mention which properties of an object are included.
2021-06-29 13:59:17 +02:00
90982d60cb
Merge pull request #37181 from jitspoe/master.button_icon_alignment
2021-06-29 13:31:53 +02:00
dfdde2c598
Merge pull request #49812 from nekomatata/node-path-editor-update
...
NodePath properly updated in the editor in more cases when nodes are moved or renamed
2021-06-29 12:51:38 +02:00
36d4314f15
Merge pull request #49921 from SirQuartz/patch-7
...
Update `Label.clip_text()` Method Description
2021-06-29 12:39:52 +02:00
e192eb05db
Add alignment options to icons on buttons.
...
They can now be centered and right-aligned.
Fixes #11380 .
2021-06-29 12:31:40 +02:00
8fb7a9f023
Merge pull request #49719 from LightningAA/rename-node-is-ancestor-of
...
Rename `is_a_parent_of()` to `is_ancestor_of()`
2021-06-29 12:07:25 +02:00
30a615dd94
Implement painting properties over TileSets
2021-06-29 11:07:46 +02:00
9758a75221
Fix move_and_collide causing sliding on slopes
...
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
2021-06-28 17:17:52 -07:00
89f270f4c5
Merge pull request #49917 from groud/tree_disable_scroll
...
Allow disabling scrolling in Tree and implement horizontal scrolling
2021-06-28 18:41:23 +02:00
3e4e530523
NodePath properly updated in the editor in more cases
...
Fix more cases of node path needing an update when nodes are renamed or
moved in the editor.
Built-in node properties:
Before, node paths were checked only for script export variables. Now
all properties are checked from the node, which includes built-in node
properties.
Allows proper node path updates for nodes like remote transform, physics
joints, etc.
Arrays and dictionaries:
Node paths nested in array and dictionary properties are now also
updated in the editor.
Also update the documentation to be clear about node path update in the
editor and at runtime.
Co-authored-by: latorril <latorril@gmail.com>
2021-06-28 09:28:29 -07:00
d7d32ced5b
Implement Tree's internal minimum width calculation
2021-06-28 15:54:31 +02:00
f28b55b551
Increase the default ReflectionProbe extents to Vector3(10, 10, 10)
...
On top of having a more realistic size out of the box, this matches
the default VoxelGI extents for better usability.
2021-06-27 16:46:03 +02:00
ea94aeac48
Amend `Label`.clip_text() Method Description
...
This update fixes an inconsistencies in the documentation about the `clip_text()` method.
2021-06-25 23:33:00 -04:00
b1d15c51bc
Implement native extension system
...
* Deprecates GDNative in favor of a simpler, lower level interface.
* New extension system allows registering core engine classes.
* Simple header interface in gdnative_interace.h
2021-06-25 17:32:45 -03:00
b2dddc3c82
Allow disabling scrolling in Tree
2021-06-25 21:19:46 +02:00
452e10ba7b
Remove clips_input() method and use clip_content
2021-06-25 15:46:37 +02:00
e4430771db
Merge pull request #49885 from reduz/implement-render-pass-support
...
Implement Framebuffer Subpass support
2021-06-25 15:00:01 +02:00
bde6f5eed1
Implement Framebuffer Subpass support
...
* Required for better optimizing mobile platforms
* Will be used by the Vulkan mobile renderer.
2021-06-24 15:59:15 -03:00
678827bebc
Correct the description of Tween.custom_step
2021-06-24 16:01:12 +02:00
b4ed84ba2b
Allow a top and bottom radius equal to 0 in CylinderMesh
...
The CylinderMesh generation code handles this special case and
avoids generating the top and bottom faces if their radius is equal
to 0. This improves performance by reducing the number of vertices
to draw.
If both values are set to 0, nothing will be visible but the mesh
generation will still succeed.
This also improves the CylinderMesh class documentation.
2021-06-23 18:50:10 +02:00
899e5f8685
Rename `is_a_parent_of()` to `is_ancestor_of()`
2021-06-21 08:39:28 -06:00
1a0cfc219b
Move indent management to CodeEdit
2021-06-20 20:00:54 +01:00
953de68cfc
Merge pull request #35608 from golfinq/master
2021-06-20 18:51:15 +02:00
0ce49800ac
Use mouse and joypad enums instead of plain integers
...
Also MIDIMessage
2021-06-20 11:54:24 -04:00
0c1d10d1ca
Rich Text Label now allows for foreground colors and background colors
2021-06-20 11:29:37 -04:00
e3ef50db38
Improve descriptions for ProjectSettings' `disable_stdout`/`disable_stderr`
2021-06-20 16:44:58 +02:00
cca29b78b9
Merge pull request #48359 from Calinou/add-engine-print-error-property
2021-06-20 13:22:08 +02:00
e28fd07b2b
Rename `instance()`->`instantiate()` when it's a verb
2021-06-19 20:49:18 -06:00
9c182b0f45
Merge pull request #41794 from KoBeWi/shiny_new_tweens
2021-06-20 00:35:28 +02:00
4effadc0ba
Merge pull request #48696 from madmiraal/fix-48692
...
Fix `InputMap.action_erase_event()` failing to erase events correctly.
2021-06-20 00:29:42 +02:00
d88be9b70c
Merge pull request #44806 from madmiraal/consolidate_json
...
Consolidate JSON, JSONParseResults and JSONParser into JSON
2021-06-19 21:45:34 +02:00
900b2e0fdc
Complete rewrite of Tweens
...
* Tweens were changed from Node to RefCounted. New API is inspired by DOTween.
* Tweens are created and managed by SceneTree, similar to SceneTreeTimer, which makes them ultra cheap to use a lot.
* Animating with Tweens is done by creating sequences of Tweeners. You create them from code and they autostart by default (fire-and-forget).
* There are 4 Tweeners that cover the former Tween functionality: PropertyTweener, IntervalTweener, CallbackTweener and MethodTweener.
* The methods were simplified a lot. Long argument lists are replaced with chained calls on Tweens and Tweeners.
* Tweeners by default execute in sequence, so it's easy to create complex chained animations.
* You can bind a Tween to a node. Tween will be removed automatically when the bound node is freed.
2021-06-19 12:08:50 +02:00
2bafcd3422
Consolidate JSON, JSONParseResults and JSONParser into JSON
...
Renames JSON.parse_string() to parse()
Renames JSON.decode_data() to stringify()
2021-06-19 08:01:40 +01:00
aa0976f47c
Expose OS data directory getter methods
...
This can be used by editor plugins and non-game applications to
store data in the correct directories according to the
XDG Base Directory specification.
2021-06-19 08:56:20 +02:00
2bf145fa5d
Make LineShape2D normal point upwards by default
...
Allows line shapes to collide with objects falling from the top by
default, which makes more sense for the most common cases.
2021-06-18 09:14:06 -07:00
92f20fd70e
Merge pull request #49659 from LightningAA/string-valid-integer-to-int
2021-06-18 16:14:14 +02:00
7aebb8f81c
Merge pull request #44156 from aaronfranke/quat-angle-to
...
Add Quaternion angle_to method
2021-06-18 12:35:58 +02:00
3fc39954ec
Merge pull request #49638 from aaronfranke/multiply-transforms
...
Allow multiplying Transforms and Basis by numbers
2021-06-18 12:35:14 +02:00
3e8620c275
Merge pull request #49475 from nekomatata/kinematic-collision-rid
...
Expose collider RID in 2D/3D kinematic collision
2021-06-18 12:32:26 +02:00
93b494d4ae
Add Quaternion angle_to method
2021-06-17 23:57:00 -04:00
0ff4095b36
Better format arguments in variant parser
2021-06-18 00:06:40 -03:00
94d31ac327
Implement animation slice drawing in CanvasItem
...
* Added a function to ignore subsequent commands if they don't fall within the slice.
* This will be used by the new TileMap to properly provide animated tiles.
2021-06-17 12:42:27 -03:00
085e1d3c03
Merge pull request #49670 from reduz/rename-visibility-notifiers
...
Rename VisibilityNotifier2D/3D to VisibleOnScreenNotifier2D/3D
2021-06-17 15:14:44 +02:00
74850b3511
Merge pull request #38261 from pycbouh/adjust-graph-edit-zoom-levels
...
Make zoom limits and step adjustable in `GraphEdit`
2021-06-17 12:12:34 +02:00
ab2456b740
Rename VisibilityNotifierXD to VisibleOnScreenNotifierXD
...
* Renames for 2D and 3D
* Class name was confusing, given both 2D and 3D have a "visible" property that is unrelated to actual on-screen visibility.
* New name makes it clear that this is about visibility on screen.
2021-06-16 22:01:39 -03:00
bb4c464fec
Merge pull request #49258 from megalobyte/editor-fix
...
Fixes for documentation search
2021-06-17 02:25:41 +02:00
6e98c4cd50
Refactor VisibilityNotifier3D
...
* This is the 3D counterpart to #49632
* Implemented a bit different as 3D works using instancing
After merged, both 2D and 3D classes will most likely be renamed in a separate PR to DisplayNotifier2D/3D.
2021-06-16 18:50:39 -03:00
341cb8da31
Merge pull request #49238 from Paulb23/code_edit_code_folding
...
Move code folding into CodeEdit and hide line hiding API
2021-06-16 20:11:39 +02:00
8ab13f8ace
Documentation search fixes
...
Updates rich_text_label so that the built-in documentation can be searched
Previously, it would only find the first result and would not select other results
Renames "_entered" functions to "_submitted"
2021-06-16 09:43:34 -07:00
b6af2a29eb
Rename `is_valid_integer()` to `is_valid_int()`
...
Method from `String`
2021-06-16 10:32:22 -06:00
48fe9c9794
Merge pull request #49657 from timothyqiu/postion
...
Fix typo in CodeEdit methods
2021-06-16 17:27:40 +02:00
bf5f13e6a0
Fix typo in CodeEdit methods
2021-06-16 22:15:29 +08:00
38d164c74b
Refactor VisibilityNotifier
...
* Works from RenderinServer
* Accurately tells when on or off-scren, its no longer approximate.
* VisibilityEnabler also simplified to use the process mode instead.
2021-06-16 10:48:57 -03:00
0a82a669e3
Make zoom limits and step adjustable in GraphEdit
2021-06-16 16:39:18 +03:00
2b7c0cfb34
Update File.store_var description to mention which properties of an object are included.
2021-06-15 20:00:19 -07:00
bd6ed3fb09
Allow multiplying Transforms and Basis by numbers
2021-06-15 22:26:29 -04:00
b574d29ed2
Merge pull request #48681 from Calinou/doc-audioeffectpitchshift
...
Complete documentation for the AudioEffectPitchShift class
2021-06-15 18:25:07 +02:00
c2ba60f31a
Merge pull request #48682 from Calinou/doc-audio-generation
...
Improve AudioStreamGenerator and AudioEffectSpectrumAnalyzer documentation
2021-06-15 16:55:14 +02:00
b5da5543db
Merge pull request #49292 from KoBeWi/you_changed,_animation
...
Clarify animation_changed signal
2021-06-15 15:34:51 +02:00
529bf43134
Merge pull request #49432 from Calinou/tweak-physics-fps-property-hint
...
Tweak the physics FPS property hint to only allow reasonable values
2021-06-15 15:19:24 +02:00
aa43b5a3f4
Merge pull request #48287 from aaronfranke/camera-is-frustum
2021-06-14 19:05:43 +02:00
4eff57d39b
Wrote JNISinglton docs
...
I added a few descriptions and links to the empty JNISingleton class doc.
2021-06-14 13:01:32 -04:00
07b8fffa7c
Merge pull request #49458 from JFonS/fix_unwrap_xform
...
Rename get_parent_spatial() to get_parent_node_3d()
2021-06-14 18:32:33 +02:00
bd40474bd6
Add is_position_in_frustum to Camera3D
2021-06-14 12:03:18 -04:00
ee702334a1
Rename get_parent_spatial() to get_parent_node3d()
...
Renames get_parent_spatial() to get_parent_node3d() and changes its
implementation. Before it was not returning a correct pointer if the
node wasn't added to a SceneTree. Now it uses the same implementation as
CanvasItem, which will be correct even for nodes outside a SceneTree.
2021-06-14 14:05:13 +02:00
3a53ae5d9f
Implement visibility range and dependencies.
...
This commit adds the following properties to GeometryInstance3D: `visibility_range_begin`,
`visibility_range_begin_margin`, `visibility_range_end`, `visibility_range_end_margin`.
Together they define a range in which the GeometryInstance3D will be visible from the camera,
taking hysteresis into account for state changes. A begin or end value of 0 will be ignored,
so the visibility range can be open-ended in both directions.
This commit also adds the `visibility_parent` property to 'Node3D'.
Which defines the visibility parents of the node and its subtree (until
another parent is defined).
Visual instances with a visibility parent will only be visible when the parent, and all of its
ancestors recursively, are hidden because they are closer to the camera than their respective
`visibility_range_begin` thresholds.
Combining visibility ranges and visibility parents users can set-up a quick HLOD system
that shows high detail meshes when close (i.e buildings, trees) and merged low detail meshes
for far away groups (i.e. cities, woods).
2021-06-14 12:17:11 +02:00
4ebf248e1b
Merge pull request #48207 from BastiaanOlij/multiview_stereoscopic
...
Add stereoscopic rendering through multiview
2021-06-13 15:36:55 +02:00
15c1a76361
Add stereoscopic rendering through multiview
2021-06-13 22:52:20 +10:00
ef7974f3d9
Merge pull request #49526 from Chaosus/fix_textureregion_errors
2021-06-13 14:44:50 +02:00
3911e71a52
Fix some virtual methods
2021-06-13 02:02:39 +02:00
6d98f84abb
Merge pull request #48746 from KoBeWi/bane_of_all_virtual_compatibility
...
Consistently prefix bound virtual methods with _
2021-06-12 23:00:40 +02:00
ac73059b56
Merge pull request #49123 from aaronfranke/it-is-time
...
Add a Time singleton
2021-06-12 22:55:25 +02:00
033985f9c2
Fix duplicate paragraph in `ArrayMesh.add_surface_from_arrays()` description
2021-06-12 17:48:56 +02:00
19afaa0203
Fixed a bunch of connection errors in TextureEditorPlugin
2021-06-12 08:01:02 +03:00
7ff135b015
Consistently prefix bound virtual methods with _
2021-06-12 00:55:52 +02:00
243be93087
Merge pull request #47242 from sygi/bitmap-opaque-polygons
...
Bitmap opaque_to_polygons documentation
2021-06-11 23:44:47 +02:00
ab29e3af53
Merge pull request #49515 from Calinou/doc-projectsettings-vram-compression-change
...
Document applying VRAM compression setting changes retroactively
2021-06-11 23:35:12 +02:00
de39223503
Document applying VRAM compression setting changes retroactively
2021-06-11 22:47:50 +02:00
530e069bc3
Merge pull request #49312 from RandomShaper/reference_to_ref_count
...
Rename `Reference` to `RefCounted`
2021-06-11 19:46:25 +02:00
50d1e0ea99
Merge pull request #47835 from mortarroad/master-lossless-webp
...
Implement lossless WebP encoding
2021-06-11 19:34:36 +02:00
04688b92ff
Rename Reference to RefCounted
2021-06-11 18:48:42 +02:00
1bc1e94208
Implement lossless WebP encoding
2021-06-11 18:46:04 +02:00
6b0183ec89
Merge pull request #49279 from Calinou/rename-string-is-abs-path-method
...
Rename `String.is_abs_path()` to `String.is_absolute_path()`
2021-06-11 15:58:16 +02:00
6107d9e180
Merge pull request #34566 from Heikki00/34541_to_json_precision
...
Increased String::num default decimal precision
2021-06-11 15:56:59 +02:00
f64fea1b23
Add Time singleton
2021-06-11 09:32:39 -04:00
a74791ed68
Add documentation to Bitmaps opaque_to_polygons.
2021-06-11 14:06:02 +01:00
74b3b0db0e
Merge pull request #47584 from HaSa1002/docs-lang-7
2021-06-11 14:35:45 +02:00
23bc697239
Port code examples to C# (V)
...
Includes:
* Variant
* Viewport
and two fixes in Array that were pointed out in #40978
VisualScript classes are skipped on purpose.
That is the final commit of the inital code porting to C#. :)
2021-06-11 13:24:11 +02:00
6710ad1737
Let var2str display StringName with correct sigil
2021-06-10 16:30:28 -05:00
b3a962945e
Add OS.get_external_data_dir() to get Android external directory
2021-06-10 16:48:17 +01:00
0eb51b31d4
Expose collider RID in 2D/3D kinematic collision
...
Can be useful to access the colliding body information for bodies
created with the physics server directly.
2021-06-09 18:26:00 -07:00
c66b2651a6
Refactor CommandQueueMT
...
* RingBuffer had no reason to be in this context
* A single buffer is used that can grow as much as the game needs.
This should make thread loading entirely reliable.
2021-06-09 13:10:49 -03:00
27cf525713
Merge pull request #42248 from Chaosus/vs_particles_shader
...
Continuation of work on visual particles system
2021-06-09 11:15:41 +02:00
38ce1fbe84
Merge pull request #49395 from nekomatata/floor-max-angle-degrees
...
Use degrees instead of rad for floor_max_angle property in CharacterBody
2021-06-09 09:00:43 +02:00
863560c6ef
Use degrees instead of rad for floor_max_angle property in CharacterBody
2021-06-08 16:00:31 -07:00
8f4ac7bc4a
Tweak the physics FPS property hint to only allow reasonable values
...
Physics FPS above 1000 cause the whole project to slow down
and are not very practical in the first place (since no CPU currently
available can keep up).
2021-06-08 19:52:48 +02:00
4daca0b580
Removes deleted OrenNayar mode from shaders and materials
2021-06-08 15:50:40 +03:00
abd2349988
Merge pull request #49378 from BastiaanOlij/fix_execute_modifications_bind
...
Fixed mistake in binding of Skeleton2D::execute_modifications
2021-06-08 08:16:38 +02:00
51ab10d3f4
Fixed mistake in binding of Skeleton2D::execute_modifications
2021-06-08 12:18:33 +10:00
f632e36ae5
Continuation of work on visual particles system
2021-06-07 20:33:17 +03:00
896aa94283
Merge pull request #49221 from Faless/mp/4.x_rpc_refactor
...
[Net] Refactor RPCs, remove RSETs
2021-06-07 17:00:08 +02:00
d567abd714
Merge pull request #49382 from akien-mga/misc-cleanup
...
Style: Cleanup uses of double spaces between words
2021-06-07 11:57:47 +02:00
2ad9f7ca61
Merge pull request #49384 from madmiraal/rename-collisionobject3d-input_event
...
Rename CollisionObject3D input_event signal position and normal parameters
2021-06-07 11:08:46 +02:00
c1c76850cb
Style: Cleanup uses of double spaces between words
...
Or after punctuation. Tried to leave third-party stuff alone, unless it has
been heavily modified for Godot.
2021-06-07 11:03:08 +02:00
be26a5e40e
Rename CollisionObject3D input_event signal position and normal parameters
2021-06-07 08:52:24 +01:00
afbabd12f3
Merge pull request #49337 from Chaosus/vs_texture_func
...
Adds `UVFunc` for panning/scaling on UV's to VisualShader's.
2021-06-07 09:38:37 +02:00
9ddc19d8bd
Merge pull request #49349 from SirQuartz/patch-5
...
Amend the quit() method description in `SceneTree` to include an exception for iOS
2021-06-07 09:26:49 +02:00
b2d2822a39
Adds `UVFunc` for panning/scaling on UV's to VisualShader's.
2021-06-07 08:31:48 +03:00
aa251c310a
Merge pull request #49325 from reduz/rename-gi-classes
...
Rename GI Classes
2021-06-06 09:50:06 +02:00
c63af17a31
Edit "quit()" method description in `SceneTree`
...
Updated the `SceneTree.quit()` method to include a note that on iOS this method won't work as apps are expected to be closed via the Home button, not programmatically.
Update Popup.xml
2021-06-05 20:30:36 -04:00
8aa3c2f091
New and improved IK system for Skeleton2D
...
This PR and commit adds a new IK system for 2D with the Skeleton2D node
that adds several new IK solvers, a way to control bones in a Skeleton2D
node similar to that in Skeleton3D. It also adds additional changes
and functionality.
This work was sponsored by GSoC 2020 and TwistedTwigleg.
Full list of changes:
* Adds a SkeletonModifier2D resource
* This resource is the base where all IK code is written and executed
* Has a function for clamping angles, since it is so commonly used
* Modifiers are unique when duplicated so it works with instancing
* Adds a SkeletonModifierStack2D resource
* This resource manages a series of SkeletonModification2Ds
* This is what the Skeleton2D directly interfaces with to make IK possible
* Adds SkeletonModifier2D resources for LookAt, CCDIK, FABRIK, Jiggle, and TwoBoneIK
* Each modification is in its own file
* There is also a SkeletonModifier2D resource that acts as a stack for using multiple stacks together
* Adds a PhysicalBone2D node
* Works similar to the PhysicalBone3D node, but uses a RigidBody2D node
* Changes to Skeleton2D listed below:
* Skeleton2D now holds a single SkeletonModificationStack2D for IK
* Skeleton2D now has a local_pose_override, which overrides the Bone2D position similar to how the overrides work in Skeleton3D
* Changes to Bone2D listed below:
* The default_length property has been changed to length. Length is the length of the bone to its child bone node
* New bone_angle property, which is the angle the bone has to its first child bone node
* Bone2D caches its transform when not modified by IK for IK interpolation purposes
* Bone2D draws its own editor gizmo, though this is stated to change in the future
* Changes to CanvasItemEditor listed below:
* Bone2D gizmo drawing code removed
* The 2D IK code is removed. Now Bone2D is the only bone system for 2D
* Transform2D now has a looking_at function for rotating to face a position
* Two new node notifications: NOTIFICATION_EDITOR_PRE_SAVE and NOTIFICATION_EDITOR_POST_SAVE
* These notifications only are called in the editor right before and after saving a scene
* Needed for not saving the IK position when executing IK in the editor
* Documentation for all the changes listed above.
2021-06-05 15:19:51 -04:00
32625145c8
Rename GI Classes
...
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
2021-06-05 09:28:56 -03:00
6f7d45d210
Merge pull request #45364 from madmiraal/rename-quat
...
Rename Quat to Quaternion
2021-06-05 13:32:08 +02:00
9f4bf5ec80
Deleted YSort, moved its functionality directly into Node2D.
...
YSort now has a compatibility alias to Node2D.
Updated TileMap to use the existing Node2D y_sort_enabled property instead
of its own property.
Updated Node2D doc to include the new y_sort_enabled member.
Updated TileMap doc to remove its mention of cell_y_sort.
Deleted YSort doc.
2021-06-05 00:55:25 -07:00
23abac9325
Linear velocity cleanup
...
CharacterBody has a linear_velocity property to replace the argument in
move_and_slide.
StaticBody handles reporting linear/angular velocity correctly when
kinematic motion is used (in 3D, used in vehicle and navigation).
2021-06-04 11:40:36 -07:00
b2bd9f4e51
Safe margin cleanup
...
Safe margin property on CharacterBody only, used as argument in
move_and_collide.
Removed kinematic_safe_margin in 3D physics server, not really useful
and now harmonized with 2D.
2021-06-04 11:40:36 -07:00
65822559ce
Support for kinematic_motion in StaticBody
...
Does the same thing as simulate motion from RigidBody in Kinematic mode,
and CharacterBody (previously KinematicBody).
Added support for constant linear/angular velocity with kinematic_motion
in StaticBody, which moves the body in physics.
Updated documentation for StaticBody and CharacterBody to describe their
functionalities more accurately.
2021-06-04 11:40:36 -07:00
ee4b756a51
More explanatory names for RigidBody modes
...
MODE_DYNAMIC instead of MODE_RIGID
MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER
No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED
(MODE_CHARACTER was forcing the body not to sleep, which is redundant
with can_sleep and wasn't done in Bullet).
2021-06-04 11:40:36 -07:00
287c3900fd
Properties for move_and_slide and remove move_and_slide_with_snap
...
- snap property to replace move_and_slide_with_snap()
- floor_max_angle, stop_on_slope, infinite_inertia, max_slides,
up_direction properties to replace arguments from move_and_slide()
- up direction now defaults to Vector3.UP and Vector2.UP
2021-06-04 11:40:36 -07:00
ba13d23140
KinematicBody split between new CharacterBody and PhysicsBody
...
PhysicsBody now has methods move_and_collide/test_move and needed
properties for these methods: safe margin, locked axes (3D only).
Moved collision_exceptions from StaticBody to PhysicsBody for 3D
(same as 2D, and conforms to documentation).
RigidBody doesn't have test_motion method anymore, it's now redundant
with PhysicsBody.test_move.
2021-06-04 11:40:36 -07:00
8acd13a456
Rename Quat to Quaternion
2021-06-04 18:14:32 +01:00
766c6dbb24
Merge pull request #48920 from aaronfranke/accept
2021-06-04 16:13:25 +02:00
5dc923d386
Merge pull request #49297 from aaronfranke/anim-type-tr3d
...
Rename Animation TYPE_TRANSFORM to TYPE_TRANSFORM3D
2021-06-04 14:11:03 +02:00
f0b17bcddb
doc: Sync classref after merge of #47336
2021-06-04 11:49:01 +02:00
a6e44bd16c
Rename Node3D's property translation to position
2021-06-04 09:54:52 +01:00
125d1a7cd3
Rename Animation TYPE_TRANSFORM to TYPE_TRANSFORM3D
2021-06-03 21:11:54 -04:00
bc5c10e0f8
Use a more specific type for AcceptDialog register_text_enter
2021-06-03 19:57:03 -04:00
8d0cbded3f
Clarify animation_changed signal
2021-06-03 23:17:52 +02:00
5d9cab3aeb
Merge pull request #38430 from aaronfranke/transform3d
2021-06-03 23:07:21 +02:00
ea2a0b5455
Merge pull request #43450 from aaronfranke/mouse-mode-bitwise
...
Add MOUSE_MODE_CONFINED_HIDDEN to MouseMode enum
2021-06-03 22:00:15 +02:00
4e4f96f989
Merge pull request #49283 from KoBeWi/a&b
...
Improve sort_custom() description
2021-06-03 21:53:15 +02:00
a9c6d2a96c
Merge pull request #45624 from aaronfranke/clamp
...
Allow clamping vectors and colors in addition to floats and ints
2021-06-03 21:20:37 +02:00
2e13e3ed4a
Allow clamping vectors and colors
2021-06-03 12:05:20 -04:00
94bc0bd919
Rename Vector2 clamped to limit_length and add limit_length to Vector3
2021-06-03 12:04:57 -04:00
98aa3b669e
Add MOUSE_MODE_CONFINED_HIDDEN
...
Co-authored-by: Hugo Locurcio <hugo.locurcio@hugo.pro>
2021-06-03 11:44:28 -04:00
48f0368ddc
Improve sort_custom() description
2021-06-03 17:43:39 +02:00
638cd3b056
Replace get_settings_dir with get_config_dir when fetching configuration paths
2021-06-03 18:24:26 +03:00
f288a79482
Merge pull request #38224 from Calinou/increase-audiostreamplayer3d-unit-size
...
Increase the default AudioStreamPlayer3D unit size to 10
2021-06-03 16:56:38 +02:00
5ea1c75d63
Rename `String.is_abs_path()` to `String.is_absolute_path()`
...
This is more consistent with `NodePath.is_absolute()`.
2021-06-03 16:00:06 +02:00
7ab34e1a96
Merge pull request #48889 from Calinou/file-rename-endian-swap
...
Rename File's `endian_swap` to `big_endian`
2021-06-03 15:19:07 +02:00
21f0961610
Proofread add_*_plugin/remove_*_plugin descriptions in EditorPlugin
2021-06-03 15:00:19 +03:00
0ac4051c00
Update documentation for Transform3D
2021-06-03 07:30:01 -04:00
b80494e633
Merge pull request #47922 from RoniPerson/patch-3
...
Added documentation to some `add_*_plugin` methods
2021-06-03 13:26:33 +02:00
d95bc3fa67
Use bold fonts in editor
...
* Labels are now bold
* Categories in trees are bold
* Main editor buttons are bold
* Fixed section folding arrows in inspector
2021-06-02 12:47:57 -03:00
9990f28d84
Merge pull request #49026 from sarchar/multiple-dns-resolves
2021-06-01 18:41:41 +02:00
5c618dd03d
Move code folding into CodeEdit and hide line hiding API
2021-06-01 17:07:01 +01:00
c5f237eaf8
Merge pull request #45393 from Paulb23/code_edit_autocomplete
2021-06-01 17:58:19 +02:00
d779b5aa3e
[Net] Refactor RPCs, remove RSETs
...
In this PR:
- Removed rset
- rpc_config can now optionally configure transfer mode
(reliable/unreliable/ordered) and channel (channels are not actually
implemented yet.)
- Refactor how the RPC id is computed to minimize the logic in Node and
scripts that now only needs a single `get_rpc_methods` function.
2021-06-01 17:24:21 +02:00
168427624e
Update String/Comment, autocomplete and hints docs
2021-06-01 16:14:03 +01:00
0286495f59
Merge pull request #49024 from groud/restore_tilemap_show_debug
...
Restore TileMap's debug collision shapes and add navigation.
2021-06-01 12:51:28 +02:00
4c1d555b9a
Merge pull request #48770 from LightningAA/scrollcontainer-ensure-item-visible-4.0
...
ScrollContainer: Expose `_ensure_focused_visible` to the scripting API and rename it to `ensure_control_visible`
2021-06-01 11:01:40 +02:00
dd8fa11ac1
Support multiple address resolution in DNS requests
...
Add two new functions to the IP class that returns all addresses/aliases associated with a given address.
This is a cherry-pick merge from 010a3433df
2021-06-01 11:24:34 +07:00
6d5b5ba89f
ScrollContainer: Expose `_ensure_focused_visible` to the API
...
Was renamed to `ensure_control_visible`
2021-05-31 17:14:57 -10:00
643da45e16
Merge pull request #49173 from KoBeWi/navigational_oblivion
...
Tweak arguments of list_dir_begin() (skips navigational and hidden files by default)
2021-05-31 14:33:58 +02:00
c9ce5367e3
Merge pull request #49213 from Calinou/doc-resource-duplicate-copy-export-only
...
Document `Resource.duplicate()` only copying exported variables' values
2021-05-31 13:42:09 +02:00
4e3d5148ff
Merge pull request #49157 from Chaosus/vs_billboard
...
Added Billboard Node to Visual Shaders
2021-05-31 12:23:01 +02:00
bd50006aae
Tweak arguments of list_dir_begin()
2021-05-31 12:16:26 +02:00
0d2e02945b
Implement shader caching
...
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
2021-05-31 10:13:09 +02:00
2ba893e3ce
Document `Resource.duplicate()` only copying exported variables' values
2021-05-31 00:11:38 +02:00
09a905ca80
Increase String::num default decimal precision
...
Fixes #34541
Renamed MAX_DIGITS to MAX_DECIMALS, since it only changes the
amount of digits after the decimal point.
Increased MAX_DECIMALS to 32, and made String::num use
MAX_DECIMALS consistently. If -1 is passed as
decimal precision to String::num, it now gets changed to
the correct precision based on the number's magnitude,
instead of using printf default(which is 6)
String::num_real also calculates the correct precision now.
Also made the types used in floating-point math more
consistent in a few places.
2021-05-29 11:24:57 -04:00
f06db8b778
Added Billboard Node to Visual Shaders
2021-05-28 09:24:06 +03:00
89e4917214
Update EditorResourcePreview queue_*() documentation
2021-05-26 08:39:40 +01:00
6a64a98039
Merge pull request #48546 from pycbouh/tree-highlight-selected-relationships
2021-05-25 19:42:55 +02:00
554382d8ad
Merge pull request #49068 from pycbouh/i-broke-inspector
...
Make `EditorFileDialog` only created on demand in `EditorResourcePicker`
2021-05-25 18:07:05 +02:00
9c92e9d849
Add highlight to the relationship lines of selected Tree items
2021-05-25 18:56:06 +03:00
c8551b0eda
Make EditorFileDialog only created on demand in EditorResourcePicker
2021-05-25 18:38:19 +03:00
da5d7db610
Rename File::get_len() get_length()
2021-05-25 11:54:28 +01:00
3b35733b4c
Restore a way to show collsion/navigation on TileMap.
...
Also remove an unused function.
2021-05-25 11:51:15 +02:00
af03e9c830
Merge pull request #48939 from Calinou/screen-orientation-use-enum
...
Use an enum to represent screen orientation in the Project Settings
2021-05-24 19:53:19 +02:00
660952a857
Use an enum to represent screen orientation in the Project Settings
...
- Tweak the setting property hint to be more informative.
- Make the setting a "basic" setting so it appears when Advanced Settings
is disabled.
- Remove redundant orientation setting in the iOS export preset.
The project setting is now used (like on Android).
Projects upgrading from a previous version will have to set the
screen orientation again in the Project Settings if it wasn't set
to the default value ("landscape").
2021-05-24 18:53:10 +02:00
6894559fb7
Merge pull request #49034 from madmiraal/fix-doc-2177
...
Unexpose methods and property for binding children to Bones in Skeleton3D
2021-05-24 18:34:57 +02:00
65faa12fd3
Unexpose methods and property for binding children to Bones
2021-05-24 16:44:17 +01:00
62efa30ed2
OS: Better validation of invalid input for get_unix_time_from_datetime
...
Default missing keys to Unix time 0 (1970-01-01 at 00:00:00 UTC).
Abort if year <= 0, this is not supported by the current algorithm.
Prevents an infinite loop further down.
Fixes #49022 .
2021-05-24 13:37:36 +02:00
9cf1d034a7
Merge pull request #48894 from reduz/gpu-particles-2d-2
...
Support for 2D particles to collide against SDF
2021-05-24 12:49:34 +02:00
789713b008
Support for 2D particles to collide against SDF
...
-Added SDF collision support for 2D particles
-Changed the SDF generation to be fully signed
2021-05-23 16:43:36 -03:00
5605454981
Change frame_coords to Vector2i
2021-05-23 21:38:27 +02:00
80f4e407b2
Add a keyboard shortcut to select the word under cursor in TextEdit
...
This also acts as a general-purpose "deselect" shortcut since pressing
it a second time will deselect text.
This is available both in the script editor and in TextEdit fields
in use, both in the editor and projects.
The Duplicate Line script editor shortcut was moved to Ctrl + Shift + D
since it conflicts with the new shortcut (Ctrl + D). The rationale for
doing so is that Duplicate Line is a less commonly used action, and
its behavior can be replicated by copying and pasting the current line
anyway. (With no selection active, the whole line will be copied.)
2021-05-22 23:47:43 +02:00
00e10a842f
Add custom background line colour to TextEdit and remove marked lines
2021-05-22 14:41:55 +01:00
3b3a55ca04
Merge pull request #48918 from groud/fix_tilemap_y_sort
...
Fixes TileSet Y-sort not working and TileSet not saving correctly
2021-05-22 00:26:36 +02:00
fdf66a21f1
[HTML5] Add easy to use download API.
...
New `JavaScript.download_buffer` method to create a prompt that let the
user download a file.
2021-05-21 15:31:23 +02:00
d3ba922ba8
Merge pull request #48854 from pycbouh/editor-reuse-resource-picker
...
Use `EditorResourcePicker` in the Inspector
2021-05-21 12:03:27 +02:00
7d80480b72
Fixes TileSet Y-sort not working and TileSet not saving correctly
2021-05-21 10:13:37 +02:00
b1859510ab
Change behavior of String.right
2021-05-20 23:07:57 +02:00
aa5552278d
Merge pull request #48719 from Faless/js/4.x_interfaces
...
[HTML5] Implement Godot <-> JavaScript interface.
2021-05-20 17:13:02 +02:00
12462d9055
Rename File's `endian_swap` to `big_endian`
...
This new name is more consistent with ResourceSaver and StreamPeer.
2021-05-20 14:58:03 +02:00
9811035ebf
[HTML5] Implement Godot <-> JavaScript interface.
2021-05-20 14:33:18 +02:00
a6a75e2c09
Merge pull request #48812 from groud/tilemap_scenes_painting
...
Implement scenes tiles in TileMaps
2021-05-20 14:32:40 +02:00
db4cf63482
Merge pull request #48860 from JohnM666/fix-basis-variant-initialization
...
Fix RigidBody3D.get_inverse_inertia_tensor() crash
2021-05-20 14:05:29 +02:00
d8bb53cd21
Implement scenes tiles in TileMaps
2021-05-20 13:12:03 +02:00
4219a4cb6f
Fix typos with codespell
...
Using codespell 2.0.0.
Method:
```
$ cat > ../godot-word-whitelist.txt << EOF
ang
curvelinear
dof
doubleclick
fave
findn
GIRD
leapyear
lod
merchantibility
nd
numer
ois
ony
que
seeked
synching
te
uint
unselect
webp
EOF
$ codespell -w -q 3 -I ../godot-word-whitelist.txt --skip="./thirdparty,*.po"
$ git diff // undo unwanted changes
```
2021-05-20 12:38:56 +02:00
e858f7c2ea
[Doc] Remove reference to UNIX sockets in StreamPeer.
...
That class can be used as a base to implement them, but there is no
actual implementation for it in Godot.
2021-05-20 11:25:47 +02:00
b19544e91d
Fix #46282 Executing RigidBody3D.get_inverse_inertia_tensor() crashes Godot
2021-05-20 10:46:24 +03:00
99173fb0d7
Document valid range of Node2D.z_index
2021-05-20 01:22:13 +02:00
e9206a55ea
Use EditorResourcePicker in the Inspector
2021-05-19 21:39:15 +03:00
896d84bd15
Merge pull request #48827 from Rhathe/set_iterations_master
...
Enable setting of collision iterations in PhysicsServer2D
2021-05-19 19:47:59 +02:00
88b1802132
Enable setting of collision iterations in PhysicsServer2D
...
This allows fine-tuning of collision iterations for more
accurate collision physics with a performance cost.
2021-05-19 10:54:10 -04:00
7104229a85
Fix InputMap.action_erase_event() failing to erase events correctly.
2021-05-19 11:43:02 +01:00
d0aaf4a1fd
Merge pull request #48814 from Calinou/viewport-use-nonzero-default-size
...
Use a non-zero default size for SubViewports
2021-05-19 10:12:42 +02:00
c340ed6394
Merge pull request #42742 from madmiraal/fix-12215
...
Return RID instead of Object id in area-body_shape_entered-exited signals.
2021-05-18 20:00:48 +02:00
bbdfb715a6
Use a non-zero default size for SubViewports
...
This makes viewports visible out of the box.
2021-05-18 18:51:39 +02:00
ab674a41aa
Area: Uncap the range for gravity and change the slider hints
2021-05-18 07:17:11 -04:00
b2fb119c53
Merge pull request #36263 from Calinou/increase-default-2d-gravity
2021-05-18 10:54:47 +02:00
66dac8bda0
Merge pull request #47544 from pycbouh/control-expose-theme-type
2021-05-18 10:52:51 +02:00
95bb7207f3
Merge pull request #46773 from trollodel/TreeItem+
...
Improve TreeItem API and allow to move nodes
2021-05-18 10:49:45 +02:00
510030fedc
Merge pull request #48528 from sent44/textedit
...
Expose get_total_visible_rows method to GDScript
2021-05-18 09:06:24 +02:00
bca0d36fe6
Improve TreeItem API and allow to move nodes
2021-05-17 22:06:46 +02:00
b3e3f0e34c
Merge pull request #48599 from Calinou/textedit-alt-scroll-faster
...
Scroll faster when holding Alt in TextEdit (and script editor)
2021-05-17 17:38:18 +02:00
6c367f8e0d
Merge pull request #48168 from LightningAA/control-to-ctrl-4.0
2021-05-17 17:38:02 +02:00
fead3fff17
Merge pull request #47260 from pycbouh/editor-resource-picker
2021-05-17 17:33:59 +02:00
9eaa139c1f
Add theme_custom_type property to Control and Window
2021-05-17 17:20:42 +03:00
e8f15f7996
Add EditorResourcePicker control based on the Inspector editor for Resources
...
Fix formatting for the docs
2021-05-17 15:26:22 +03:00
37c3b33253
Merge pull request #48605 from sent44/scripteditor_get_codeedit
...
Add `get_base_editor` to `ScriptEditorBase`
2021-05-16 23:06:01 +02:00
8e7b17429e
Merge pull request #48650 from AnilBK/graph-node-setters
...
Added GraphNode missing setters.
2021-05-16 17:37:12 +02:00
c872819be6
Improve AudioStreamGenerator and AudioEffectSpectrumAnalyzer documentation
...
- Mention audio sample rate caveats in other classes where relevant.
2021-05-15 23:23:06 +02:00
6be32d8cbc
Complete documentation for the AudioEffectPitchShift class
2021-05-15 23:20:48 +02:00
2b30728ebf
Add get_base_editor to ScriptEditorBase
2021-05-15 18:47:00 +07:00
a3dd18b12e
Merge pull request #39976 from aaronfranke/tilemap-vec2i
...
Update TileMap to use Vector2i
2021-05-13 14:48:16 +02:00
2c3c3b2829
-Added missing setters to GraphNode.
...
-Improved various GraphNode documentation.
2021-05-13 17:45:07 +05:45
5895479a5e
Rename the audio `FFT_Size` enum to `FFTSize` for consistency
2021-05-13 02:42:49 +02:00
3877ed73d0
Dynamic BVH broadphase in 2D & 3D Godot Physics
...
Port lawnjelly's dynamic BVH implementation from 3.x to be used in
both 2D and 3D broadphases.
Removed alternative broadphase implementations which are not meant to be
used anymore since they are much slower.
Includes changes in Rect2, Vector2, Vector3 that help with the template
implementation of the dynamic BVH by uniformizing the interface between
2D and 3D math.
Co-authored-by: lawnjelly <lawnjelly@gmail.com>
2021-05-10 16:28:55 -07:00
cf1cf6c6eb
Scroll faster when holding Alt in TextEdit (and script editor)
...
This feature is inspired by a similar feature found in
Visual Studio Code.
2021-05-10 01:27:54 +02:00
7350f90c57
Document caveats of `OS.get_unique_id()`
2021-05-09 13:23:53 +02:00
446460eaf9
Fixes the SkeletonIK twisting issue by using the skeleton global pose without overrides
2021-05-08 16:11:45 -04:00
75e3f6b732
Update TileMap to use Vector2i instead of two ints
2021-05-07 16:20:02 -04:00
97fecd1b69
Rename "Control" key to "Ctrl" and add "_pressed" suffix to all InputEventWithModifiers properties/methods
2021-05-07 14:00:50 -06:00
ee44982c45
Merge pull request #48538 from akien-mga/remove-native-video-api
...
OS: Remove native video API only implemented on iOS
2021-05-07 21:22:41 +02:00
c3f7465b7e
Merge pull request #48535 from groud/tiles_squashed
...
TileSet and TileMap rework (squashed)
2021-05-07 20:46:06 +02:00
35ec0e9be7
OS: Remove native video API only implemented on iOS
...
See discussion in #43811 , it was only implemented on iOS and even that
implementation was fairly limited. This would best be provided as plugins
for Android and iOS without cluttering the shared OS API.
2021-05-07 20:40:24 +02:00
a3dda2df85
Rework the TileSet resource and TileMap nodes:
...
- Move most properties from TileMap to TileSet,
- Make TileSet more flexible, supporting more feature (several
collision layers, etc...),
- Fusion both the TileMap and TileSet editor,
- Implement TileSetSources, and thus a new way to index tiles in the TileSet,
- Rework the TileSet and TileMap editors completely,
- Implement an editor zoom widget (and use it in several places)
2021-05-07 18:06:17 +02:00
7bb12b0d6d
Expose get_total_visible_rows as get_visible_line_count
2021-05-07 20:54:05 +07:00
a95c953c48
Improve docs for filter map and reduce
2021-05-07 14:09:44 +02:00
bcbd480c32
Merge pull request #45144 from dalexeev/color-consts
...
Rename color constants (alternative)
2021-05-07 12:22:49 +02:00
3a5310ccb9
Merge pull request #35992 from Calinou/main-run-args-command-placeholder
...
Implement the `%command%` placeholder in the Main Run Args setting
2021-05-07 00:43:45 +02:00
ce4aa07276
Implement the `%command%` placeholder in the Main Run Args setting
...
This can be used to tell Godot to run an executable that will run Godot
rather than running Godot directly. This is useful to make Godot start
on the dedicated GPU when using a NVIDIA Optimus setup on Linux:
`prime-run %command%`
The `editor/run/main_run_args` setting declaration was moved to make it
visible in the ProjectSettings documentation.
2021-05-07 00:05:02 +02:00
89e6f6ca2e
Merge pull request #48500 from groud/add_buttongroup_pressed_signal
...
Adds a pressed signal to ButtonGroup
2021-05-06 23:20:33 +02:00
01f80201bf
Merge pull request #38645 from KoBeWi/FMR
...
Add filter, map and reduce to Array
2021-05-06 20:44:01 +02:00
323f176915
Adds a pressed signal to ButtonGroup
2021-05-06 12:16:27 +02:00
4a28f7e44f
Increase the default 2D gravity to 980.0
...
This makes 2D RigidBody physics feel less floaty out of the box.
This closes https://github.com/godotengine/godot-proposals/issues/98 .
2021-05-05 22:49:06 -04:00
3f078c99f6
Rename `IP_Unix`, `IP_Address` and `TCP_Server` to remove underscores
2021-05-06 02:52:01 +02:00
87d107bb11
Increase the default AudioStreamPlayer3D unit size to 10
...
This makes it easier to hear sound while setting up the node.
Since this changes the default value, this may break existing projects
slightly.
This also tweaks the Unit Size editor property hint for better usability.
See discussion in #25468 .
2021-05-06 02:45:46 +02:00
b90adec417
Improve the AudioStreamPlayer(2D/3D) class descriptions
2021-05-05 20:39:36 +02:00
c50acc7339
Add filter, map and reduce to Array
2021-05-05 15:54:57 +02:00
e144ff0445
Merge pull request #48315 from nekomatata/expose-physics-debug-shape
...
Expose get_debug_mesh in Shape3D to scripting API
2021-05-05 15:17:36 +02:00
d1801f976f
Merge pull request #48280 from Calinou/doc-file-open-compressed-godot-only
...
Document that `File.open_compressed()` can only open files saved by Godot
2021-05-05 15:16:23 +02:00
c9e874b62d
Merge pull request #48442 from akien-mga/posmod-int64_t
...
Re-bind posmod, use int64_t instead of int
2021-05-04 15:15:52 +02:00
ea9cab3e76
Merge pull request #48430 from reduz/add-rpc-to-callable
...
Add RPC support to Callable
2021-05-04 14:07:21 +02:00
e196733e88
Re-bind posmod, use int64_t instead of int
...
Fixes #48420 , fixes #48421 .
The binding was missed when moving GDScript built-in to Global Scope it seems.
Co-authored-by: kleonc <9283098+kleonc@users.noreply.github.com>
2021-05-04 13:25:08 +02:00
4e7ca279fc
Merge pull request #47855 from aaronfranke/doubleclick
...
Rename `doubleclick` to `double_click`
2021-05-04 13:12:17 +02:00
9a8ef54b5a
Merge pull request #48008 from LightningAA/scrollcontainer-hide-scrollbars-4.0
...
Add the ability to hide `ScrollContainer`'s scrollbars
2021-05-04 12:58:12 +02:00
bee7f8ff23
Merge pull request #48274 from groud/undoredo_dependencies
...
Allow to hook a callback into inspector's undo/redo
2021-05-04 11:26:55 +02:00
0de9a7d803
Rename `doubleclick` to `double_click`
2021-05-04 04:38:08 -04:00
b46672db72
Provide a way to hook into Inspectors UndoRedo.
2021-05-04 09:55:22 +02:00
c76acf6890
Add RPC to Callable
...
-Up to each scripting language to implement this
-If not supported for the function, it will just error when you try to call
2021-05-03 19:21:37 -03:00
a8f45efa43
doc: Sync classref with current source
2021-05-03 20:42:21 +02:00
58ff0dac1a
Create mobile renderer
2021-05-03 21:54:11 +10:00
0eb9b414c1
Add `Engine.print_error_messages` property to disable printing errors
...
This can be used during unit test suite runs to hide error and warning
messages.
Care should be taken when using this feature, as it can hide important
information if used wrongly.
2021-05-01 23:11:08 +02:00
33a0fb6e02
Merge pull request #48345 from madmiraal/fix-48242-docs
...
Fix documentation following implementation of particle trails
2021-05-01 14:51:29 +02:00
fcf8071ec9
Fix documentation following implementation of particle trails
2021-05-01 13:12:31 +01:00
f3c1190dc9
Merge pull request #48283 from BastiaanOlij/xr_viewport
...
Move XR flag from subviewport into viewport
2021-05-01 12:54:35 +02:00
e0bdf40d15
Move XR flag from subviewport into viewport
2021-05-01 19:58:11 +10:00
5f098d6db6
Document that `File.open_compressed()` can only open files saved by Godot
2021-05-01 01:24:01 +02:00
7352a4c0d9
Expose get_debug_mesh in Shape3D to scripting API
...
Can be useful for custom drawing of physics shapes without having to add
a collision object node to the tree.
2021-04-29 18:18:39 -07:00
7516ff3805
Document that `SceneTree.call_group()` is deferred
2021-04-29 23:01:41 +02:00
28f56e2cbf
Merge pull request #48272 from Calinou/doc-standardmaterial3d-rim-unshaded
...
Document that clearcoat/rim lighting is not visible on unshaded materials
2021-04-29 13:36:40 +02:00
cab5064f20
doc: Sync classref with current source
...
And typo fix from https://github.com/godotengine/godot-docs/pull/4882 .
2021-04-29 12:11:40 +02:00
418fe155f9
Merge pull request #48269 from akien-mga/remove-largetexture
...
Remove obsolete LargeTexture, it's no longer useful since 3.x
2021-04-29 09:45:06 +02:00
126ea92a64
Document that clearcoat/rim lighting is not visible on unshaded materials
2021-04-28 17:38:44 +02:00
bb6bdcee1a
Add the ability to hide scrollcontainer's scrollbars
2021-04-28 09:28:31 -06:00
9e9ac9f6ad
Merge pull request #46476 from DarknessCatt/master
...
Add fill method to Arrays and PackedArrays
2021-04-28 16:52:31 +02:00
0e93a1df79
Remove obsolete LargeTexture, it's no longer useful since 3.x
...
It existed in early Godot releases to allow working around hardware limitations
on max texture sizes (e.g. hardware limits of 1024x1024 pixels).
Nowadays the max texture size supported natively by Godot is 16384x16384, and
even low end mobile hardware should support at least 4096x4096.
The LargeTexture implementation is basically just an array with offsets, sizes
and textures and should be easy to replicate with a custom Texture resource if
needed - solving most of its bugs on the way as the implementation removed here
has various unimplemented or incomplete methods.
2021-04-28 15:51:55 +02:00
054d8852b9
Add error_string function
2021-04-27 22:02:35 +02:00
0582cefcbb
Merge pull request #48241 from akien-mga/tabs-panel-style-unused
...
Tabs: Remove unused 'panel' stylebox from default theme
2021-04-27 19:33:40 +02:00
95cfce661b
Merge pull request #48050 from JFonS/occlusion_culling
2021-04-27 19:07:12 +02:00
cd8d321961
Tabs: Remove unused 'panel' stylebox from default theme
...
Cf. https://github.com/godotengine/godot/issues/37875#issuecomment-625297308 .
2021-04-27 17:36:53 +02:00
72bd64c1d5
Merge pull request #47398 from Faless/feature/network-local-port-salvaged
2021-04-27 15:04:30 +02:00
e0c1cc702c
Merge pull request #38349 from asheraryam/convex-decompose-master
...
Create GDScript bindings for creating multiple-convex collision bodies [4.0]
2021-04-27 10:05:12 +02:00
ecfbb0fd28
Expose creating multiple-convex-collision static bodies to GDScript
2021-04-27 06:56:04 +03:00
473a660241
Merge pull request #48106 from Calinou/doc-project-settings-feature-tags
...
Link to Feature tags more explicitly in ProjectSettings documentation
2021-04-23 22:04:54 +02:00
4d9d99bb82
Implement occlusion culling
...
Added an occlusion culling system with support for static occluder meshes.
It can be enabled via `Project Settings > Rendering > Occlusion Culling > Use Occlusion Culling`.
Occluders are defined via the new `Occluder3D` resource and instanced using the new
`OccluderInstance3D` node. The occluders can also be automatically baked from a
scene using the built-in editor plugin.
2021-04-23 21:45:23 +02:00
ff6f384618
Merge pull request #48129 from kleonc/args-master
...
Docs: Minor argument names fix
2021-04-23 17:13:09 +02:00
1a3d60944f
Merge pull request #47485 from rafallus/fix/rigidbody-crash
...
Fix crash on RigidBody _direct_state_changed
2021-04-23 16:02:26 +02:00
d13cfc8d62
Docs: Minor argument names fix
2021-04-23 15:46:51 +02:00
cfa06f0f76
Unexpose _direct_state_changed in PhysicsBody
...
Removed _direct_state_changed bindings
Affects 2D and 3D nodes
Callbacks now use Callable
Tests were changed accordingly
2021-04-22 23:20:58 -05:00
497c3f97b2
Call randomize() automatically
2021-04-22 21:13:43 +02:00
188bd5638c
Link to Feature tags more explicitly in ProjectSettings documentation
2021-04-22 20:07:54 +02:00
b56241f22f
ICU: Update to version 69.1, improve ICU data export process.
2021-04-22 16:56:53 +03:00
efd27a63c1
Add fill method to Arrays and PackedArrays
2021-04-21 11:33:53 -03:00
17591fc6a1
Improve the `Engine.editor_hint` property documentation
2021-04-20 22:56:44 +02:00
b06116d62f
Merge pull request #42770 from madmiraal/fix-26680
...
Move collision layer and mask into CollisionObject.
2021-04-20 21:07:32 +02:00
8a8dd9cef4
Merge pull request #47896 from Calinou/videoplayer-stream-position-warning
...
Print a warning when trying to seek in VideoPlayer
2021-04-20 20:07:13 +02:00
399f55751e
Merge pull request #47983 from smix8/doc_animationnodetimeseek
...
Document AnimationNodeTimeSeek with clarified usage and code example
2021-04-20 20:05:08 +02:00
0c995a9790
Merge pull request #47976 from RoniPerson/patch-4
...
changed description of `merge_polygons`
2021-04-20 20:04:13 +02:00
d85fa25318
Merge pull request #47953 from Calinou/doc-astar-thread-safety
...
Document `AStar.get_point_path()` not being thread-safe
2021-04-20 20:03:24 +02:00
fdf041a466
Merge pull request #47347 from nekomatata/heightmap-support
...
Heightmap collision shape support in Godot Physics
2021-04-20 17:40:28 +02:00
071871b787
Move collision layer and mask into CollisionObject.
2021-04-20 10:38:42 +01:00
aa677865e3
Merge pull request #47991 from LightningAA/regroup-area-inspector-4.0
...
`Area[X]D`: Put physics override parameters in their own group and document that areas can be used to influence audio
2021-04-20 09:54:07 +02:00
29775a1714
doc: Sync classref with current source
2021-04-19 12:26:37 +02:00
8ba06e3161
Merge pull request #47448 from madmiraal/rename-lineedit-cursor
...
Rename LineEdit getters and setters to match property names
2021-04-19 10:40:29 +02:00
80b1a29c46
Put physics override parameters in their own group and document that areas can be used to influence audio
2021-04-18 21:27:06 -06:00
35c9192689
Document AnimationNodeTimeSeek with clarified usage and code example
...
Document AnimationNodeTimeSeek with clarified usage and code example
2021-04-17 21:36:48 +02:00
8f01c261f2
changed description of `merge_polygons`
...
Clarified that the `merge_polygons` method can produce multiple holes.
2021-04-17 15:20:49 +02:00
86822b187e
Rename LineEdit caret_* properties getters and setters to match property
2021-04-17 12:41:23 +01:00
0ab928e060
Import: Cleanup and optimize etcpak compression method
...
Avoid unnecessary allocation of temporary buffers for each mip, and creates
only one Image with the compressed data.
Also renames variable and reorders code for clarity.
Clarify that squish is now only used for decompression.
Documented which formats can be decompressed in Image.
2021-04-16 17:08:36 +02:00
cf64bad63e
Document `AStar.get_point_path()` not being thread-safe
2021-04-16 16:04:17 +02:00
e849157e07
Added documentation to some `add_*_plugin` methods
...
Added documentation to some `add_*_plugin` methods and the corresponding `remove_*_plugin` methods.
Added an example of how to register a plugin to `add_inspector_plugin` and linked to it in the other methods.
2021-04-15 19:23:27 +02:00
c7a4e2196e
Merge pull request #47878 from clayjohn/rename-get_surface_material
...
Rename get_surface_material to get_surface_override_material
2021-04-15 07:57:15 +02:00
92731d292c
Rename get_surface_material to get_surface_override_material
2021-04-14 20:24:03 -07:00
ea46639e22
Print a warning when trying to seek in VideoPlayer
...
Seeking isn't implemented in built-in video formats and can only
be supported in GDNative-provided video formats.
2021-04-14 20:39:13 +02:00
0e82b26a60
Merge pull request #47797 from kleonc/capsulemesh_docs_fix
...
Fix docs description for CapsuleMesh::mid_height
2021-04-14 08:26:09 +02:00
554742312d
Document overriding project settings that have feature tags
...
This non-obvious behavior can take a while to discover and fix,
so it's important to mention it in the class reference.
2021-04-12 21:51:08 +02:00
4d5c8e0b18
This renames PacketPeerUDP.listen to bind.
2021-04-12 21:05:33 +02:00
da8c2310b5
Allow local port control on net_socket connections
2021-04-12 21:05:33 +02:00
cee5414698
Merge pull request #43180 from nathanfranke/node-configuration-array
...
Use Array for node configuration warnings
2021-04-12 09:40:55 +02:00
184abce192
Merge pull request #47709 from KoBeWi/node_that_changes_everything
...
Expose edit_node() for editor plugins
2021-04-12 09:11:33 +02:00
2a8c59c171
Use Array for node configuration warnings
...
Previously, the warnings were passed as a string and delimitation of which were hard coded at each implementation.
2021-04-11 23:25:38 -05:00
72014a7a2e
Expose edit_node() for editor plugins
2021-04-12 00:13:08 +02:00
dd3cc9b817
Fix docs description for CapsuleMesh::mid_height
2021-04-11 18:19:12 +02:00
8b6e3d6375
Merge pull request #46340 from gongpha/various-color-picker
...
Add Various ColorPicker shapes
2021-04-10 13:29:50 +02:00
034c48dbed
Add missing color argument in forward_canvas_draw_over_viewport example.
2021-04-09 16:49:04 +02:00
1075943cc5
Merge pull request #43900 from nathanfranke/fix-stream-peer-tcp-ambiguity
...
Improve Ambiguous StreamPeerTCP `set_no_delay` Documentation
2021-04-07 11:54:59 +02:00
6294507acb
Add Various ColorPicker shapes
2021-04-06 22:48:03 +07:00
f4b82814f8
Merge pull request #47622 from pycbouh/editor-plugins-expose-scale
...
Expose editor scale to the plugin API
2021-04-05 19:00:45 +02:00
ea31af68ba
Expose editor scale to the plugin API
2021-04-05 18:44:01 +03:00
aea30827eb
Merge pull request #47638 from RoniPerson/patch-1
...
Added missing `:` in gdscript example for `TileMap` class reference.
2021-04-05 11:54:59 +02:00
40c56f924b
Merge pull request #47631 from pycbouh/update-misformatted-docs
...
Fix misformatted documentation from recent PRs
2021-04-05 11:36:24 +02:00
5870931a15
Added missing `:` in gdscript example.
2021-04-05 11:13:25 +02:00
c526a1e22d
Fix misformatted documentation from #47435 , #42827 , #46991
2021-04-04 23:25:40 +03:00
cbf5408685
Merge pull request #46273 from Chaosus/vs_comment
...
Added Comment node to Visual Shaders
2021-04-04 16:04:12 +02:00
ed2f51b15f
Merge pull request #47452 from BastiaanOlij/xr_positional_tracker_ref
...
Change XRPositionalTracker to a reference (master)
2021-04-03 10:13:23 +02:00
4b6e9f3157
Merge pull request #46991 from madmiraal/rename-invert-reverse
...
Rename Array.invert() to Array.reverse()
2021-04-01 13:32:22 +02:00
5d0cc7c15f
Merge pull request #47252 from KoBeWi/themecide
...
Add methods to remove theme overrides
2021-03-31 20:52:19 +02:00
3096423ddc
Merge pull request #44289 from bruvzg/ctl_gl_contours
...
Expose dynamic font vector outlines to the GDScript.
2021-03-31 09:28:20 +02:00
e49f88b312
Merge pull request #44951 from KoBeWi/documint
...
Complete the docs for primitive types
2021-03-31 09:27:13 +02:00
0d3fa2a125
[Complex Text Layouts] Provide access to glyph contour points.
2021-03-31 09:32:14 +03:00
7dfa13c944
Complete the docs for primitive types
2021-03-31 03:50:47 +02:00
898a2a7cf3
Implement Tabs minimum size
2021-03-30 16:11:35 +02:00
c6ff6707a4
Merge pull request #47457 from bruvzg/rtl_spacing
...
RichTextLabel: fix font extra spacing and style box size usage.
2021-03-29 17:07:38 +02:00
9f4893c70b
Use extra font spacing in the RichTextLabel line height calculation, and stylebox size in the minimum size calculation.
2021-03-29 17:26:53 +03:00
454c889e61
Change XRPositionalTracker to a reference and better expose it to GDNative
2021-03-29 23:01:47 +11:00
bc29f4bca1
Merge pull request #47435 from madmiraal/rename-texture-get_data
...
Rename Texture.get_data() to get_image()
2021-03-29 10:41:22 +02:00
b2eb838781
doc: Sync classref with current source
2021-03-29 09:51:33 +02:00
bf0ec13fee
Merge pull request #47428 from Calinou/doc-giprobe-sdfgi-leaks
...
Document how to avoid light leaks with GIProbe and SDFGI
2021-03-28 14:16:49 +02:00
fd30c36985
Rename Texture.get_data() to get_image()
2021-03-28 13:00:46 +01:00
217192b9e0
Document how to avoid light leaks with GIProbe and SDFGI
2021-03-28 01:05:01 +01:00
4378ef0bb7
Add a warning on using directory to access of imported files
2021-03-27 16:19:15 -04:00
c8dd3c7d80
Heightmap collision shape support in Godot Physics
2021-03-25 16:52:41 -07:00
c6b9ceadf2
Merge pull request #47163 from bruvzg/macos_sandbox_file_dialog
...
FileDialog: add Back/Forward buttons, add message for inaccessible folders.
2021-03-26 00:00:25 +01:00
0fc8318f1a
Fix ParticlesMaterial spread
2021-03-25 17:33:44 +01:00
9343a8a970
Merge pull request #47251 from pycbouh/theme-more-useful-methods
...
Add utility methods to Theme, improve error messages and documentation
2021-03-25 13:09:27 +01:00
3a5929abf3
doc: Sync classref with current source
2021-03-25 12:19:51 +01:00
6e4a8b7f37
Clarify that get_unix_time() returns seconds
2021-03-24 13:21:32 +01:00
cdafcc3206
Merge pull request #42974 from skyace65/NavMesh2
...
Document more NavigationMesh properties
2021-03-23 13:24:01 +01:00
a5324787c8
Rename some more global enums (Key, Joy, MIDI)
2021-03-23 07:13:23 -04:00
10d7fccb54
Rename ButtonList enum and members to MouseButton
2021-03-23 07:13:23 -04:00
b202a0dd2a
FileDialog: add Back/Forward buttons, add message for inaccessible folders.
2021-03-23 08:03:41 +02:00
0339200972
Merge pull request #43366 from Calinou/doc-surfacetool-method-order
...
Make the expected method calling order in SurfaceTool more explicit
2021-03-23 00:57:26 +01:00
5950482b86
Remove the clearing behavior from add_override
2021-03-23 00:55:02 +01:00
ecff5bc42f
Add methods to remove theme overrides
2021-03-23 00:51:16 +01:00
6a84ade316
Merge pull request #45234 from madmiraal/rename-phashtranslation
...
Rename PHashTranslation to OptimizedTranslation
2021-03-23 00:12:12 +01:00
32aea7b40f
Merge pull request #47277 from nekomatata/kinematic-safe-margin-doc
...
More detailed documentation for KinematicBody safe collision margin
2021-03-23 00:08:35 +01:00
4aa25b0f6c
More detailed documentation for KinematicBody safe collision margin
2021-03-22 15:41:21 -07:00
6c9259ff2f
Fix feature tag casing in the Windows pen tablet project setting name
...
Feature tags are case-sensitive.
2021-03-22 14:18:48 +01:00
9df05745ba
Add utility methods to Theme, improve error messages and documentation
2021-03-22 14:49:31 +03:00
6648dc58d3
Make the expected method calling order in SurfaceTool more explicit
2021-03-21 21:36:50 +01:00
755c70b871
Rename Array.invert() to Array.reverse()
...
Does the same internally for List and Vector<>, which includes all
PackedArray types.
2021-03-21 10:20:08 +00:00
fa681d04b7
Merge pull request #46937 from nekomatata/soft-body-support
...
SoftBody support in GodotPhysics 3D
2021-03-20 21:45:20 +01:00
793000c6a9
Merge pull request #47139 from nekomatata/concave-backface-collision
...
Disable backface collision with ConcavePolygonShape by default
2021-03-20 21:43:57 +01:00
6608d99291
Merge pull request #47001 from madmiraal/rename-sprite_2d-region_enabled
...
Rename Sprite.region_enabled getter and setter methods to match properties
2021-03-20 18:36:17 +01:00
07f1cd5ff8
Rename PHashTranslation to OptimizedTranslation
2021-03-20 10:02:47 +00:00
6a61b9f6e8
Document more NavigationMesh properties
2021-03-19 22:04:34 -04:00
8455e901f3
class reference proofreading
2021-03-19 13:21:20 +01:00
7bbd545432
Disable backface collision with ConcavePolygonShape by default
...
Helps a lot with soft bodies and generally useful to avoid shapes to go
through the ground in certain cases.
Added an option in ConcavePolygonShape to re-enable backface collision
on specific bodies if needed.
2021-03-18 11:30:22 -07:00
d5ea4acd2d
SoftBody support in GodotPhysics 3D
...
- Fixed SoftBody surface update with new rendering system
- Added GodotPhysics implementation for SoftBody
- Added support to get SoftBody rid to interact with the physics server
- Added support to get SoftBody bounds from the physics server
- Removed support for unused get_vertex_position and get_point_offset
from the physics server
- Removed SoftBody properties that are unused in both Bullet and
GodotPhysics (angular and volume stiffness, pose matching)
- Added RenderingServerHandler interface to PhysicsServer3D so the physics servers don't need to reference the class from SoftBody node directly
2021-03-18 09:04:17 -07:00
4ca1e73ff9
doc: Sync classref with current source
...
And move GLTF docs to its module folder.
2021-03-18 16:37:43 +01:00
c34b110784
Merge pull request #47098 from Birdulon/DocDrawString4
...
Documentation: Correct CanvasItem.draw_string position description.
2021-03-18 09:08:40 +01:00
886c942b40
Documentation: Correct CanvasItem.draw_string position description.
...
Also add height warnings to Font.get_char_size and Font.get_string_size
2021-03-18 18:09:23 +10:30
b588232b83
Fix AudioEffectCapture buffer length cannot be changed
2021-03-17 23:07:38 +01:00
7b223e8eec
Merge pull request #47080 from mbrlabs/ios-sensor-conversion
...
Converted sensor acceleration units to m/s² on iOS and UWP
2021-03-17 14:27:23 +01:00
fda2743fef
Converted sensor acceleration units to m/s^2 on iOS and UWP
...
This is beacuse on Android these values are already in m/s^2 while on
iOS and UWP they are in g. This just makes the behaviour consistent on
all platforms.
2021-03-17 14:05:05 +01:00
08ca4184f4
Merge pull request #47024 from groud/navigation
...
Allow Navigation to be more flexible
2021-03-17 09:18:54 +01:00
d1798b235c
Document different unit of measurement for sensor data on iOS and Android
2021-03-16 23:06:40 +01:00
a384fac953
Merge pull request #47014 from aaronfranke/atlastex-doc
...
Improve documentation for AtlasTexture
2021-03-15 21:12:34 +01:00
d359e159da
Document the valid input range for `acos()` and `atan()`
2021-03-15 17:25:22 +01:00
ac7073f586
Allow Navigation to be more flexible
2021-03-15 15:58:59 +01:00
682286fec8
Improve documentation for AtlasTexture
2021-03-14 21:18:50 -04:00
3dcdb84660
Rename Sprite.region_enabled getter and setter to match properties
...
Also renames Sprite2D.region_filter_clip property and its setter to
region_filter_clip_enabled and set_region_filter_clip_enabled.
2021-03-14 17:31:49 +00:00
1e820b3d9d
[46188] fix: get unix from datetime when empty dict
2021-03-12 09:27:21 +01:00
ba1344408f
Implement Navigation layers
2021-03-10 11:23:06 +01:00
a9dc53d152
Remove Navigation2D/3D nodes, and move the navigation map to the world resource
2021-03-10 11:23:06 +01:00
469ac1e415
doc: Sync classref with current source
2021-03-10 10:54:21 +01:00
83b1acdc60
Merge pull request #45545 from abaire/relaxes_gltf_name_sanitization
...
Relaxes node name sanitization in gltf documents.
2021-03-09 14:54:33 +01:00
18bb36707f
Merge pull request #46110 from gongpha/colorbar-in-colorpicker
...
Add color interpolation bar on each channel in ColorPicker
2021-03-09 14:43:26 +01:00
ab585be885
Merge pull request #46801 from Faless/js/4.x_allow_hidpi
...
[HTML5] Respect allow_hidpi option during setup
2021-03-09 10:56:05 +01:00
cecc930e78
Merge pull request #46784 from Bhu1-V/doc-update
...
Documentation : Added Additional Description to PhysicsServer2D->area_create()
2021-03-09 09:58:26 +01:00
d295d53b4a
Add interpolation bar on each channel in ColorPicker
2021-03-09 14:58:19 +07:00
e3fed7bde8
Added Additional Description for PhysicsServer2D->area_create() method.
2021-03-09 09:03:10 +05:30
f34c7982c5
[HTML5] Respect allow_hidpi option during setup
...
The option was forced to `true` before, unlike on other platforms.
2021-03-08 23:37:53 +01:00
85cb3c044d
Merge pull request #44324 from Calinou/doc-basematerial3d-height-no-triplanar
...
Document that BaseMaterial3D doesn't support height mapping + triplanar
2021-03-08 19:41:11 +01:00
afd0df7921
Merge pull request #46386 from KoBeWi/projekt_settingz
...
Clarify ProjectSettings.save for exported projects
2021-03-07 10:17:59 +01:00
156c402f2b
Allow to save override.cfg with ProjectSettings
2021-03-07 01:21:44 +01:00
38f2e32e32
Return RID instead of Object id in area-body_shape_entered-exited signals.
2021-03-06 10:48:17 +00:00
aaeb07d50f
Merge pull request #43929 from HaSa1002/docs-lang-6
...
Docs: Port Code Examples to C# (R, S, T, U)
2021-03-05 22:36:05 +01:00
bae843a1c9
Docs: Port Code Examples to C# (R, S, T, U)
...
* RenderingServer
* RichTextEffect
* SceneTree
* SceneTreeTimer
* ScriptCreateDialog
* SpinBox
* Sprite2D
* StreamPeer
* String
* SurfaceTool
* TextEdit
* TileMap
* Tree
* Tween
* UDPServer
* UndoRedo
Co-authored-by: Aaron Franke <arnfranke@yahoo.com>
2021-03-05 18:57:28 +01:00
4de0768cdb
Merge pull request #46663 from Calinou/doc-margincontainer-theme-constant
...
Use safer `add_theme_constant_override()` in MarginContainer code sample
2021-03-05 15:11:56 +01:00
af513344ce
Use safer `add_theme_constant_override()` in MarginContainer code sample
...
Control has magic setters to set custom theme items, but using the
dedicated Control methods is less prone to typos so it should be favored.
2021-03-04 17:17:40 +01:00
9e2882a989
Improve docs for Thread
...
An attempt to improve the documentation for Thread
- Adds documentation on how and when the `wait_to_finish` should be used
- Adds a note on what to be careful about when using `wait_to_finish`
2021-03-04 16:56:54 +01:00
068300c7c9
Adding Raycast3D custom debug shape thickness and color
2021-03-04 11:17:26 +01:00
a5b5ac47b8
Remove trivial examples in the ItemList class documentation
...
See https://github.com/godotengine/godot-docs/issues/4712 .
2021-03-03 22:58:45 +01:00
5895cd4c4f
Merge pull request #36202 from YeldhamDev/sprite_region_hide
...
Hide extra options from various nodes if they're not enabled
2021-03-02 14:15:25 +01:00
70304f8633
Hide extra options from various nodes if they're not enabled
2021-03-02 09:25:09 -03:00
39a4ec50ea
Fix examples in Callable docs
2021-03-02 02:34:53 +01:00
bd42a6c51e
Merge pull request #42007 from HaSa1002/callable-docs
...
Document missing Callable methods
2021-03-01 13:20:07 +01:00
54ff2da476
Document missing Callable methods
...
* Callable.hash()
* Callable.is_custom()
* Callable.is_null()
* Callable.is_standard()
* Callable.bind()
* Callable.unbind()
* Callable::operator==
* Callable::operator!=
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
2021-03-01 12:49:21 +01:00
5b58482b41
Merge pull request #46508 from rcorre/pathbake
...
Clarify Curve.get_closest_point uses baked points.
2021-03-01 09:37:16 +01:00
a637cd8016
Merge pull request #46534 from asmaloney/doc-styleboxflat-grammar
...
Fix some grammar in StyleBoxFlat class docs
2021-03-01 09:35:22 +01:00
89e7e61773
Fix some grammar in StyleBoxFlat class docs
2021-02-28 20:09:10 -05:00
89283b7b53
Logger: Cache 'flush_stdout_on_print' to improve performance, and works before ProjectSettings starts.
...
ProjectSetting: Now 'application/run/flush_stdout_on_print' requires a restart of the Editor to take effect
2021-02-28 19:36:10 -03:00
ef5042a70f
Clarify Curve.get_closest_point uses baked points.
...
Based on the doc, I wasn't sure if get_closest_point would return the
closest baked point or the closest "source" point. It seems to use
baked:
8faecd6a47/scene/resources/curve.cpp (L809)
2021-02-28 07:18:34 -05:00
31243e377f
Fixes typo in Array::bsearch_custom doc
2021-02-26 18:01:08 +08:00
60d2c1fd47
Remove GDScript bindings for OS.get/set_exit_code, SceneTree.quit(<exit_code>) should be used instead
2021-02-25 18:34:50 +01:00
f01e95eb55
Merge pull request #46416 from nekomatata/draw-collision-outline-option
...
Added option in project settings to draw Shape2D outlines
2021-02-25 17:15:22 +01:00
c4b116cff7
Added option in project settings to draw Shape2D outlines
...
Disabling collision outlines can be useful for performance when the game
is running and many collision shapes are displayed.
2021-02-25 07:52:50 -07:00
355803db1b
Improve the `OS.get_environment()`/`OS.set_environment()` documentation
2021-02-25 15:38:51 +01:00
4c8f5b998f
Expose set_environment to GDScript
2021-02-25 23:36:14 +11:00
305683f83b
Merge pull request #46360 from nmrkr/drag-preview-crash-after-free
...
Fix crash during drag if user queue_free'd the drag preview
2021-02-24 22:43:53 +01:00
eaa04c1a22
Fix crash during drag if user freed the drag preview
2021-02-24 20:59:17 +01:00
61cc1c8624
Relaxes Node naming constraints in glTF documents to match the Editor.
2021-02-24 08:22:27 -08:00
a527c6856b
Merge pull request #46045 from bruvzg/text_server_bmp_create
...
[TextServer] Restores bitmap font dynamic construction functions.
2021-02-24 12:55:36 +01:00
548de64742
Use a more specific type for Area2D/3D body signals
2021-02-24 00:05:54 -05:00
cb29e6c49c
Merge pull request #45994 from Jummit/expose-edit-selected
...
Expose edit_selected in Tree
2021-02-22 16:29:03 +01:00
13fb24cb6f
expose edit_selected in Tree
2021-02-22 15:50:21 +01:00
8107cbd66e
Merge pull request #45934 from angad-k/fix-smoothstep-function-documentation
...
fix minor issue in smooth step function's documentation
2021-02-22 12:38:47 +01:00
40191a748b
Merge pull request #46253 from asmaloney/docs-theme
...
[docs] Clarification on theme's get_stylebox
2021-02-22 10:35:35 +01:00
159581739a
Document theming a SpinBox's background
...
This closes #46248 .
2021-02-21 19:32:11 +01:00
fe3051fcce
Added Comment node to Visual Shaders
2021-02-21 12:40:17 +03:00
f6087d3f2b
Document that Button doesn't interpret touch input (= no multitouch)
...
TouchScreenButton should be used for gameplay actions instead.
2021-02-21 00:30:21 +01:00
d397c32169
[docs] Clarification on theme's get_stylebox
...
Remove reference to "icon" (must have been a copy-paste error) & clarify where to find out what names & node_types are valid.
2021-02-20 10:10:28 -05:00
78de8a762b
Update documentation for the new ProcessMode
2021-02-19 10:22:09 -05:00
efddb8a0cb
Merge pull request #46194 from Calinou/os-delay-no-negative
...
Don't allow negative values for `OS.delay_usec()`/`OS.delay_msec()`
2021-02-19 15:14:36 +01:00
bc395c2549
Merge pull request #46221 from akien-mga/doc-sync-classref
...
doc: Sync classref with current source
2021-02-19 15:06:50 +01:00
0d1d719178
doc: Sync classref with current source
...
And fix various bogus bindings following previous PRs.
2021-02-19 14:39:14 +01:00
aaaaaf5bb6
Merge pull request #46219 from pycbouh/doc-editor-plugin-build
...
Add documentation for EditorPlugin's build method
2021-02-19 13:59:00 +01:00
b84f65f13c
Merge pull request #44737 from KoBeWi/touch_shape_screen_centered_button
...
Fix shape_centered property in TouchScreenButton
2021-02-19 13:45:23 +01:00
724ed88215
Add documentation for EditorPlugin's build method
2021-02-19 15:42:41 +03:00
reduz
Rémi Verschelde
PouleyKetchoupp
jitspoe
Gilles Roudière
Hugo Locurcio
Nick H
kobewi
Lightning_A
Paulb23
Aaron Franke
golfinq
Marcel Admiraal
Michael Alexsander Silva Dias
Gregory Basile
Haoyu Qiu
Yuri Sizov
Levi Lindsey
Kyle
jfons
Bastiaan Olij
Yuri Roubinsky
Pedro J. Estébanez
Morris Tabor
sygi
Johannes
Jonathan Gollnick
Rémi Verschelde
TwistedTwigleg
andriyDev
Fabio Alessandrelli
Chuck
Heikki Simojoki
JohnM666
kleonc
Rhathe
trollodel
pycbouh
sent44
Anilforextra
Florian Kothmeier
asheraryam
rafallus
bruvzg
Matheus Lima Cunha
smix8
RoniPerson
clayjohn
dam
Nathan Franke
Anders Stenberg
Kongfa Waroros
skyace65
Paul Joannon
Luke Hubmayer-Werner
jmb462
Marcus Brummer
Aitor Cereceto
Bhuvan Vemula
Zak
Andy Maloney
Mateo Kuruk Miccino
Ryan Roden-Corrent
Emmanuel Leblond
Delf Neumärker
abaire
Jummit
Andy Maloney