Each driver used to define the (same) project settings values
`audio/mix_rate` and `audio/output_latency`, but the setting names are
not driver specific.
Overriding is still possible via platform tags.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
The previous logic used the 'tools' directory within the Android sdk to validate it. That directory was recently deprecated and removed from the Android sdk folder (https://developer.android.com/studio/releases/sdk-tools)
The issue was caused by PR #36906 which changes prevented the generated shared libraries from being stripped.
Since the change is only needed for development (debugging) purposes, it's commented out by default.
With the NDK installed locally, gradle plugin 3.6.0 seems to enforce
a specific older NDK version, and will fail building if you don't have
it installed with:
```
No version of NDK matched the requested version 20.0.5594570.
Versions available locally: 21.0.6113669
```
Upstream issue: https://github.com/gradle/gradle/issues/12440
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
- update gradle plugins versions
- add formatting rules for AndroidManifest and gradle build files
- cleanup java_godot_lib_jni
Note: logic was mostly moved around and no new logic/functionality was added.
Namely, move the drive dropdown to just the left of the path text box and don't include the former
in the latter.
This improves the UX on Windows.
In the UNIX case, since its concept of drives is (ab)used to provide shortcuts to useful paths, its
dropdown is kept at the original location.
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
It was initially implemented in #5871 for Godot 3.0, but never really
completed or thoroughly tested for most platforms. It then stayed in
limbo and nobody seems really keen to finish it, so it's better to
remove it in 4.0, and re-add eventually (possibly with a different API)
if there's demand and an implementation confirmed working on all
platforms.
Closes#8770.
Due to the port to Vulkan and complete redesign of the rendering backend,
the `drivers/gles3` code is no longer usable in this state and is not
planned to be ported to the new architecture.
The GLES2 backend is kept (while still disabled and non-working) as it
will eventually be ported to serve as the low-end renderer for Godot 4.0.
Some GLES3 features might be selectively ported to the updated GLES2
backend if there's a need for them, and extensions we can use for that.
So long, OpenGL driver bugs!
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
Calling `step()` on EditorProgress too often will slow down the
rest of the editor, so it's best avoided. This is also more consistent
with other exporters, as most of them don't report per-file progress
either.
Exporting a 2D project with ~1,100 files to Android now takes
about 10 seconds from a debug editor build instead of 65 seconds.
This closes#30850.
Changed the condition to add a length filter to make it consistent with the documentation (0 means no character limit). Otherwise the default value in LineEdit causes the virtual keyboard to be non-fonctional on Android.
Reverts the following commits:
- c81ec6f26d40b70283958a4ef3e216fb32cbaf14:
"Exposes capture methods to AudioServer, variable renames for
consistency, added documentation."
- 47c558b98abf842910c780294314326662410cdf:
"Expose audio callbacks as signals."
- dabaa11b3c451e9b8f2cca7e563bd9ec51edb169:
"Fix to make sure the capture buffers are deallocated at shutdown.
Silences warnings."
Some documentation improvements were kept for pre-existing methods.
See rationale for reverting these changes in #30468.
- `EditorNavigationMeshGenerator` was being registered as part of the Core API,
even after d3f48f88bb. We must make sure to
set Editor as the current ClassDB API type before creating an instance.
- The `VisualScriptEngineSingleton.constant` property has a property hint string
that's different between tools and non-tools builds. This commit makes the
hint string to no longer be set in `_bind_methods`, and to instead set it in
`_validate_property`. This way it's ignored when calculating the API hash.
- `JavaClassWrapper` is now registered in ClassDB on all platforms,
using a dummy implementation on platforms other than Android.
This fixes API portability between Android and other platforms.
- Updated `--class-db-json` command to ignore non-virtual methods that start
with an underscore (see: 4be87c6016).
- Go up was not working, simplify was used one time too much
- Added GestureHandler
- Added doubleTap to recognize open dir
- Fixed scroll where sometimes the scroll jumped between start and end when pointer was outside or on the edge of the scroll area
I'm barely scratching the surface of the changes needed to make the
--export command line interface easy to use, but this should already
improve things somewhat.
- Streamline `can_export()` templates check in all platforms, checking
first for the presence of official templates, then of any defined
custom template, and reporting on the absence of any.
Shouldn't change the actual return value much which is still true if
either release or debug is usable - we might want to change that
eventually and better validate against the requested target.
- Fix discrepancy between platforms using `custom_package/debug` and
`custom_template/debug` (resp. `release`).
All now use `custom_template`, which will break compatibility for
`export_presets.cfg` with earlier projects (but is easy to fix).
- Use `can_export()` when attempting a command line export and report
the same errors that would be shown in the editor.
- Improve error reporting after a failed export attempt, handling
missing template and invalid path more gracefully.
- Cleanup of unused stuff in EditorNode around the export workflow.
- Improve --export documentation in --help a bit.
Fixes#16949 (at least many of the misunderstandings listed there).
Fixes#18470.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Provides access to a MulticastLock.
As specified by the Android API, broadcast/multicast packets may be
filtered on some phones unless the application explicitly acquires
a "MulticastLock".
The description appears when hovering over the one-click-deploy button (top-right). This information helps the user distinguish between their devices if multiple are connected or if the same device is connected by both usb and tcpip (two entries in the list for the same device).
Avoid using adb reverse if deploying with adb tcpip.
This still can fail if the user is attempting to debug over usb and has connected their device over BOTH usb and tcpip. I'm not sure how we would detect that problem in advance though.
A better fix would be to make Godot's export code properly parse the
tag over multiple lines (and maybe even use XMLParser instead of doing
it ad-hoc?).
As for the APK names, we could alternatively pick the first .apk found
in the `debug` and `release` folders without expecting a specific name.
Fixes#32414.
Example: To generate for the `release` build target and for the `armv7`, `arm64v8` and `x86` architectures, run the commands:
```
cd godot
scons -j4 platform=android target=release android_arch=armv7
scons -j4 platform=android target=release android_arch=arm64v8
scons -j4 platform=android target=release android_arch=x86
cd platform/android/java
./gradlew generateGodotTemplates
```
Notes:
- The generated build templates will be located in the `godot/bin` directory (i.e: `android_debug.apk`, `android_release.apk`, `android_source.zip`).
- The gradle command will only generate templates for the target(s) with available native shared libraries. For example, running the commands above will only generate the `android_release.apk` and `android_source.zip` files.
To delete the generated artifacts, the following commands can be used:
```
cd platform/android/java
./gradlew cleanGodotTemplates
```
Fixes#32168.
Previously we were returning all key up and key down messages as unhandled to the OS. This was resulting in crashes on certain keypresses (left cursor), for undetermined reason.
This PR defaults all key up and keydown messages to be returned as handled by Godot, except those explicitly coded as exceptions (currently volume keys only).
This fades out messages originating from the editor to make messages
printed by the project stand out more.
This also tweaks wording in some editor messages for consistency.
The application module `app` serves double duties of providing the prebuilt Godot binaries ('android_debug.apk', 'android_release.apk') and the Godot custom build template ('android_source.zip').
The language didn't make it clear that it's installing a *source* template
to the project folder, for later use when compiling custom APKs.
Fixes#28736.
It does check its permission every `vibrate_handheld()` calls.
Vibrate permission is added by checking it on export settings.
And there are some changes for deprecated method.
It had been synced with style changes (spaces -> tabs), not sure why
I accepted to merge it this way back then...
Synced with eb57657f66,
same as before.
Custom-changes will be reapplied in the next commit, if relevant.
So far we left most temporary files lying around, so this attempts to
fix that.
I added a helper method to DirAccess to factor out the boilerplate of
creating a DirAccess, checking if the file exists, remove it or print
an error on failure.
As of 3.1 and later, we have too many thirdparty C++ dependencies
and some internal uses of `new` and `delete` too for it to make
sense to build without the STL on Android.
The option has been broken since 3.0, and the "System STL" that we
relied on for basic support of `new` and `delete` is likely to be
dropped from the NDK:
https://android.googlesource.com/platform/ndk/+/ndk-release-r20/docs/BuildSystemMaintainers.md#System-STL
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
It's the recommended way to set those, and is more portable
(automatically prepends -D for GCC/Clang and /D for MSVC).
We still use CPPFLAGS for some pre-processor flags which are not
defines.
Fixes#17004
Currently the keydown and keyup messages are handled with method like this:
if ((source & InputDevice.SOURCE_JOYSTICK) == InputDevice.SOURCE_JOYSTICK
|| (source & InputDevice.SOURCE_DPAD) == InputDevice.SOURCE_DPAD
|| (source & InputDevice.SOURCE_GAMEPAD) == InputDevice.SOURCE_GAMEPAD) {
// joystick input
}
else
{
// keyboard input
}
The constant for SOURCE_DPAD is 513
10 0000 0001
and the constant for SOURCE_KEYBOARD is 257
1 0000 0001
However, rather confusingly, for many keyboards the source sent by android is 769
11 0000 0001
Thus the keyboard is passing the check as being a DPAD and being processed as a joystick rather than keyboard. This PR handles the specific case of 769, allowing input from physical keyboards.
This is a new singleton where camera sources such as webcams or cameras on a mobile phone can register themselves with the Server.
Other parts of Godot can interact with this to obtain images from the camera as textures.
This work includes additions to the Visual Server to use this functionality to present the camera image in the background. This is specifically targetted at AR applications.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
text=auto works well in Git 2.10+ but it's broken in previous versions,
which are still used in production on e.g. Ubuntu 16.04 LTS.
Also fix a couple missed text files with CRLF terminators.
.bat files likely require it to be processed properly on Windows,
but core.autocrlf should take care of converting them on the fly
when checking out on Windows.
Those were disable to keep size small, and on Android avoid the dependency on the STL,
but for tools build (editor) this is not really a concern.
Note: as of today it's not possible to build tools=yes for those platforms, but this
change is one of the necessary steps to enable it.
Fixes#25262.
Reasoning: ID is not an acronym, it is simply short for identification, so it logically should not be capitalized. But even if it was an acronym, other acronyms in Godot are not capitalized, like p_rid, p_ip, and p_json.
Include paths are processed from left to right, so we use Prepend to
ensure that paths to bundled thirdparty files will have precedence over
system paths (e.g. `/usr/include` should have lowest priority).
Many contributors (me included) did not fully understand what CCFLAGS,
CXXFLAGS and CPPFLAGS refer to exactly, and were thus not using them
in the way they are intended to be.
As per the SCons manual: https://www.scons.org/doc/HTML/scons-user/apa.html
- CCFLAGS: General options that are passed to the C and C++ compilers.
- CFLAGS: General options that are passed to the C compiler (C only;
not C++).
- CXXFLAGS: General options that are passed to the C++ compiler. By
default, this includes the value of $CCFLAGS, so that setting
$CCFLAGS affects both C and C++ compilation.
- CPPFLAGS: User-specified C preprocessor options. These will be
included in any command that uses the C preprocessor, including not
just compilation of C and C++ source files [...], but also [...]
Fortran [...] and [...] assembly language source file[s].
TL;DR: Compiler options go to CCFLAGS, unless they must be restricted
to either C (CFLAGS) or C++ (CXXFLAGS). Preprocessor defines go to
CPPFLAGS.
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
Fredia Huya-Kouadio
Fabio Alessandrelli
SkyJJ
Rémi Verschelde
thebestnom
fhuya
PouleyKetchoupp
lupoDharkael
Juan Linietsky
Juan Linietsky
Rajat Goswami
Aaron Franke
Marcel Admiraal
unknown
Pedro J. Estébanez
bruvzg
Rafał Mikrut
Hugo Locurcio
Alexander Holland
Mark Wynn Garcia
Bruno Lourenço
Ignacio Etcheverry
Haoyu Qiu
Jérémy Zurcher
Cagdas
Robbie Cooper
lawnjelly
volzhs
IAmActuallyCthulhu
Robin Hübner
Cameron Reikes
Saracen
Ibrahn Sahir
Nils ANDRÉ-CHANG
JohnJLight
BastiaanOlij
wombatstampede
hbina085
George Marques
clayjohn
Guilherme Felipe
Hendrikto