The About button is located in the bottom-right corner of the
project manager.
This allows removing the copyright notice from the window title
(which looked a bit ugly in comparison to other applications).
Previously if more than one Godot editor was running then the debugger of one editor would not work because both editors were trying to connect on the same port.
This commit attempts to fix this by allowing the debugger to change the port at runtime in such cases.
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Backport of #48239.
When there is no selection, the camera will center around the
world origin.
This helps people get back to the world center if they haven't added
any nodes yet.
(cherry picked from commit fc055e1993)
When ctrl-clicking in the code editor, the view will now be centered on the function result.
Also replaces a circumstance where goto_line_centered should be used.
(cherry picked from commit 2b775bd698)
- Display a specific error message if the project doesn't have an
`export_presets.cfg` file.
- Display a list of detected export presets if an invalid export
preset name is supplied.
(cherry picked from commit 09f38ea215)
During the development of 3.3, internationalization features were added to allow arbitrary bone and node names.
However, doing so will break all references and existing animation clips for projects upgraded from 3.2
This adds an import setting, enabled by default, but disabled for newly generated .import files which restores the old behavior.
This makes it possible to see whether a scrollbar grabber is at the top
or at the bottom of a scrollbar. Also, if a scrollable area is very
large, this makes it easier to notice that the area can be scrolled
(since the grabber is proportionally very small).
The scrollbar grabbers were also made thicker and slightly more opaque
for better visibility, especially in peripheral vision.
(cherry picked from commit b60b6ddba4)
Its only purpose was to prevent importing CSV files as translations, but it
would still import them as *nothing*, leading to workflow issues.
This is now properly fixed with #47268 which allows disabling the import for
specific files.
(cherry picked from commit 7ed2220928)
* Removes error shown when file is in 'keep' mode
* Display a warning when attempting to open the file
* Closes#47296
(cherry picked from commit 4706297356)
The new CollisionObject gizmo used for custom shapes was used with
higher priority due to alphabetical order and was preventing physical
bones from being displayed in the editor.
Keyframe times shift slowly in imported animations, starting with a zero shift
at the beginning and increasing and becoming erratic slowly farther into an
animation, reaching significant levels at times after about 3 minutes into an
animation. This commit fixes the issue by increasing the precision of the
floating point numbers used for keyframe time calculations. Only the most
significant cases that cause fast accumulation of errors over a short animation
duration are fixed. Other cases that would have a marginal benefit from
switching to double precision numbers are left for another PR/further analysis.
Note that this change has no impact on the runtime performance of games/apps
created using Godot. It only affects the GLTF importer.
Fixes#47127.
(cherry picked from commit 6770a9413b)
The changes made in this commit refresh the URL OptionButton when editor settings are modified.
No need to restart any more for the changes to appear in the Asset Library.
Fix#46977
(cherry picked from commit 6525d74623)
When creating a Windows folder via a Godot's dialog, the extra spaces are not removed which causes problems with Windows. We now remove leading and trailing whitespace when creating a dir.
(cherry picked from commit c8538153b0)
ALT key modifier was hardcoded is node_3d_editor_plugin.cpp and didn't take editor settings into account.
Fix#46973
(cherry picked from commit 31077d875e)
Fix#46961:
This commit correctly initialize capitalization in sub-inspectors (like shaders's sub-inspector in the inspector panel) with the editor settings.
(cherry picked from commit 281f5a4999)
Fixes crash that happened while exporting if zero files were selected
and adds more error handling to EditorExportPlatform class.
(cherry picked from commit 15656d4182)
With smaller arrays/dictionaries, this makes it possible to view all of
an array/dictionary's items on a single page.
Larger values could be used, but make switching between node selections
quite slow, especially on low-end CPUs. They could also be problematic
with complex resource inspectors for arrays/dictionaries that contain
Resources.
This closes https://github.com/godotengine/godot-proposals/issues/2058.
(cherry picked from commit d97d65b184)
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- Based on C++11's `mutex` and `condition_variable`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- Based on C++11's `mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- `BinaryMutex` added for special cases as the non-recursive version
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
The font size of the Find in Files dialog used to get out of sync with
the code editor font size.
The font of the Find in Files dialog is now updated each time there is a
change to the theme. This way, the font size of the Find in Files
results changes in response to the code font size being changed using
Ctrl +/- or using the Editor Settings.
Fixes#35499
(cherry picked from commit 011fdece6d)
This hints the user that the project manager is currently busy
loading the project. This is important for the HTML5 editor as the
current feedback isn't very obvious.
This also removes the unused `_exit_dialog` function.
This adds a new project setting (`physics/common/enable_pause_aware_picking`). It's disabled by default.
When enabled, it changes the way 2D & 3D physics picking behaves in relation to pause:
- When pause is set, every collision object that is hovered or captured (3D only) is released from that condition, getting the relevant mouse-exit callback., unless its pause mode makes it immune from pause.
- During the pause. picking only considers collision objects immune from pause, sending input events and enter/exit callbacks to them as expected.
- When pause is left, nothing happens. This is a big difference with the classic behavior, which at this point would process all the input events that have been queued against the current state of the 2D/3D world (in other words, checking them against the current position of the objects instead of those at the time of the events).
Enabling filtering and mipmaps on the editor fonts makes the text
look slightly better. While not as good as SDF-based fonts, it should be
more usable already.
This change impacts the visual script and visual shader editors.
This partially addresses #16220.
This commit adds a view-dependant fade to the 3D viewport grid. It fades out
at steep view angles to hide the solid regions that appear far from the camera.
I also included a fade to hide the grid borders.
I added some improvements to the dynamic grid when the camera is in orthogonal mode.
It properly handles zoom now, and the grid center is now set to the intersection point
between the grid plane and the camera forward ray, keeping the grid
always visible.
(cherry picked from commit 73e62dffb9)
Cinematic preview enables the Camera3D preview automatically.
When previewing a Camera3D, the rotation gizmo isn't displayed as
it can't be used.
(cherry picked from commit fa1d853eeb)
This affects the editor scale and font hinting settings which will now
display their automatically chosen value in parentheses.
(cherry picked from commit 57654508c9)
Completely re-write the lightmap generation code:
- Follow the general lightmapper code structure from 4.0.
- Use proper path tracing to compute the global illumination.
- Use atlassing to merge all lightmaps into a single texture (done by @RandomShaper)
- Use OpenImageDenoiser to improve the generated lightmaps.
- Take into account alpha transparency in material textures.
- Allow baking environment lighting.
- Add bicubic lightmap filtering.
There is some minor compatibility breakage in some properties and methods
in BakedLightmap, but lightmaps generated in previous engine versions
should work fine out of the box.
The scene importer has been changed to generate `.unwrap_cache` files
next to the imported scene files. These files *SHOULD* be added to any
version control system as they guarantee there won't be differences when
re-importing the scene from other OSes or engine versions.
This work started as a Google Summer of Code project; Was later funded by IMVU for a good amount of progress;
Was then finished and polished by me on my free time.
Co-authored-by: Pedro J. Estébanez <pedrojrulez@gmail.com>
