The previous code used `camelcase_to_underscore` to prettify the names for
display in the export preset, but it leads to inconsistencies if we don't make
sure to do the reverse operation when writing to the `AppxManifest.xml`.
It's simpler to keep the same names as in the manifest, which is also what
users will see referenced in MS documentation.
Fixes#47900.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
(cherry picked from commit c87e49d7bc)
The XDG Base Directory specification does not allow using relative paths
(which broke things in Godot anyway). If a relative path is detected,
it should be ignored.
(cherry picked from commits 011a99316a
and 0e1d45b210)
We found that this flag causes this error on PR #48812 which does not add any
fancy inline assembly:
```
/tmp/tile_set-ce236a.s: Assembler messages:
/tmp/tile_set-ce236a.s:34676: Error: selected processor does not support `bfc x0,#32,#32'
clang++: error: assembler command failed with exit code 1 (use -v to see invocation)
```
That flag is mentioned in various errors related to assembler failures on
arm64v8 with Clang from the Android NDK.
It was added in Godot in #6958 when migrating from GCC to Clang, and is indeed
referenced in the NDK's Clang migration guide:
https://android.googlesource.com/platform/ndk/+/master/docs/ClangMigration.md
> Especially for ARM and ARM64, Clang is much stricter about assembler rules
> than GCC/GAS. Use `-fno-integrated-as` if Clang reports errors in inline
> assembly or assembly files that you don't wish to modernize.
We don't get those errors nowadays so it seems the flag is no longer needed.
(cherry picked from commit 23f7c75126)
Add `WARN_ON_UNDEFINED_SYMBOLS=0` for the main module (which defines
`godot_js_main` as extern coming from the "side" module, i.e. the main
Godot binary).
(cherry picked from commit 14c057eab6)
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
We don't get updates when the window is unfocused/minimized, so we must
detect the situation where the counted ticks start drifting away
resulting in more frames drawn than needed.
This commit adds a check to ensure that the target ticks do not drift
away more than one second.
(cherry picked from commit a1fe6d6899)
This uses the `event.code` value to retrieve the physical code, while
still using the extra logic to map the unicode value to our keylist,
when computing the `scancode` (supporting ASCII and Latin-1).
Since we clone the environments to build thirdparty code, we don't get an
explicit dependency on the build objects produced by that environment.
So when we update thirdparty code, Godot code using it is not necessarily
rebuilt (I think it is for changed headers, but not for changed .c/.cpp files),
which can lead to an invalid compilation output (linking old Godot .o files
with a newer, potentially ABI breaking version of thirdparty code).
This was only seen as really problematic with bullet updates (leading to
crashes when rebuilding Godot after a bullet update without cleaning .o files),
but it's safer to fix it everywhere, even if it's a LOT of hacky boilerplate.
(cherry picked from commit c7b53c03ae)
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Backport of #48239.
It seems 30.0.1 had issues with compatibility with JDK 8 and 11,
which appear to be solved in 30.0.3 as per godotengine/godot-docs#4796.
(cherry picked from commit d88e1f04df)
Generates a key/cert snakeoil pair or use a custom SSL cert/key.
This is of course false security, and potentially detrimental for it.
But, so long, those are the requirements browser vendors agreed on to
use things like the Gamepad API, and more advanced topics like wasm
threads.
You don't need this if you run on localhost (at least!), but you do
need this (or a much safer nginx proxy) to try those things on your
local network (e.g. when debugging a phone, networking, etc).
We used to only generate the favicon if it was specified in the user
project settings, now it's optional, will export it to `NAME.icon.png`,
(falling back to the default project icon if none is set in project
settings), and the `<link>` tag is added using the `$HEAD_INCLUDE`
instead of being hardcoded in the template.
After further testing it seems to work fine now when building binaries with GCC 5
on Ubuntu 16.04 (previously we were using GCC 9 on Ubuntu 14.04).
Follow-up to #45629.
(cherry picked from commit aa15ad72ee)
We need to propagate the hacky checks from the raycast config to the
lightmapper config, as the failure of a `can_build()` check is not notified to
other modules (which might even be checked further depending on the processing
order in SConstruct).
A more thorough fix would be to change SConstruct to do two loops on modules:
one to check `can_build()` and disable modules which can't build, then another
one to rechecked `can_build()` with the new lineup and do further config.
But there would be more risk for regressions than with this ad hoc hack.
Similar story for the `platform/x11/detect.py` change... oh my eyes :(
in uwp's version of export.cpp create a ExportNotifier object so that EditorExportPlugin _export_begin and _export_end functions will be called as documentated.
(cherry picked from commit 564ddcde77)
We were using `Content-Length` from the server when `Content-Encoding`
was not set (i.e. response was not compressed).
Sadly, in CORS requests accessing headers is restricted, and while
`Content-Length` is enabled by default, `Content-Encoding` is not.
This results in the impossibility of knowing if the content was
compressed, unless the server explicitly enabled the encoding header
via `Access-Control-Expose-Headers`.
To keep maximum compatibility we must disable `body_size` completely.
(cherry picked from commit 737ed0f66e)
Promise chaining the emscripten module `then` function breaks it badly,
causing an infinite loop.
I'm unsure about the source of the issue, but most likely at this point
is due to the old emscripten version (I remember very old html5 builds
having issue with promise chaining too).
With this commit, we no longer use the module as a promise, and
instantiate it using `Promise` objects directly for compatibility.
(cherry picked from commit ae3c9345cc)
We might be able to make it work by building Mono itself with
ASLR protection too, but there might still be issues when loading
e.g. GDNative DLLs built without ASLR protection.
In the short term this is not a goal, but we can reconsider later
what is actually needed for ASLR protection to work and keep things
user-friendly.
This commit changes the way Thread::caller_id works. By moving caller_id
to the .cpp file we make sure that the TLS variable doesn't get
relocated twice causing a crash. Since we build with LTO for release
builds (and everyone should be doing that anyway) there is no extra
overhead from the non-static method. We do do an extra bool check now
there but I don't think this will add much in the way of overhead.
This check cannot be avoided if we still want to be able to cache the
thread ID hash, as we had to move the setter because of limitations of
the WinRT platform. The original workaround for this was in #46813 but
this has some unintended consequences. Specifically; threads that never
create a Thread object will always return 0 in Thread::get_caller_id()
which caused a regression. For instance the editor now freezes when
importing large textures. This PR also addresses that.
Additionally we now enable ASLR support when building with MingW, this
includes a workaround for MingW. MingW refuses to create an appropriate
relocation table if no symbols are exported. So we just export the
various main() functions in godot_windows.cpp.
While ASLR support isn't criticial for Godot, previous versions of Godot
just happened to work with a dynamic base 'by accident' and some users
run Godot this way. After the thread change the .tls section now needs
relocations to make this work. By enabling ASLR at build-time we create
these relocations and people who forced ALSR on previously will now get
a working Godot again.
This fixes#47256 and fixes#47219
This is the 3.x version of this PR. For master a different approach is
possible which I will make in the coming days.
`WebAssembly.instantiateStreaming` requires the mime-type to be
`application/wasm`, but some servers (including most debug servers) do
not provide the content-type header.
This commit forces it via JavaScript, by creating a `Response` object
with the `wasm` content, and explicitly defined `content-type` header.
(cherry picked from commit 778ef4e217)
Exposes AddressSanitizer support in MSVC compiler. Can be installed via individual
components in the Visual Studio 2019 Installer.
Disabled by default. Compile the engine with `scons use_asan=yes`.
(cherry picked from commit 53901d870b)
With a very nice hack, a new hidden configuration option that delays
dropped files removal at exit.
This still leaks while the project manager is running, but will clear
memory as soon as it exits or load something.
(reminder, dropped files are reguarly removed after the signal is
emitted specifically to avoid leaks, but I prefer hacking the HTML5
config then the project manager).
(cherry picked from commit f1e810adcb)
It used to be updated before the first iteration, causing the
window/viewport size values to be incorrect during the initialization
phase (e.g. during the first `_ready` notification).
(cherry picked from commit 3f059b90d6)
Added as an export option "Experimental Virtual Keyboard".
There is no zoom, so text/line edit must be in the top part of the
screen, or it will get hidden by the virtual keyboard.
UTF8/Latin-1 only (I think regular UTF-8 should work out of the box in
4.0 but I can't test it).
It uses an hidden textarea or input, based on the multiline variable,
and only gets activated if the device has a touchscreen.
This could cause problems on devices with both touchscreen and a real
keyboard (although input should still work in general with some minor
focus issues). I'm thinking of a system to detect the first physical
keystroke and disable it in case, but it might do more harm then good,
so it must be well thought.
This allows to install it as an app, and provide offline support (after
the first run).
Practically, this boils down to adding a JSON file as a manifest, an
offline page to be displayed when the cached files are not avaialble,
and a JS file to cache resources and return them.
The reason for the "first run requirements" is that some browsers, will
emit an "install" by just visiting the page (to see if the JS code is
compatibile), and we do not want to force casual visitors to just
download the 10 MiB+ compressed editor WebAssembly file without pressing
the start button.
Special thanks to Hugo Locurcio (Calinou) for the initial work.
To avoid trying to do PRIME detection on fake `libGL.so` as used by e.g.
Renderdoc or Primus, we skip detection if there's a `libGL.so` in
`LD_LIBRARY_PATH`... and our luck is that Steam defines it and includes
system paths too, thus the actual system `libGL`... 🤦
So if we detect Steam, we skip this check.
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
(cherry picked from commit 562b1cd2cda2098e62c7501dae87393def99c23a)
This allow the loading bar to be much more reliable, even in cases where
realible stream loading status is not detectable (server-side
compression, chunked encoding).
The problem happened on methods `get_screen_position`, `get_screen_size`
and `set_current_screen` when they were passed a negative screen value.
Fixes:
- #46184
- #46185
- #46186
A template for `jsdoc` that generat the HTML5 public classref.
The script can be run via `npm run docs` to print to stdout.
You can dry run via `npm run docs -- --d dry-run` or write to file via
`npm run docs -- -d /path/to/file.rst`
Also update Makefile in `doc/` and add dry run test to CI.
(cherry picked from commit 472482013e)
This commit also removes the utils.js engine file, moving some of it's
content to config.js and some to engine.js .
(cherry picked from commit 018ee5a4dc)
We used to have it like `$GODOT_VERSION` which caused inconsistencies
between different scons versions when substituting it.
It's now `@GODOT_VERSION@`, which is safe on both scons3 and scons4.
(cherry picked from commit 4404eb57e4)
When using use_static_cpp we want to statically link with atomic as well
to make sure we don't incur any new runtime dependencies.
Scons doesn't quite support this so we do this little trick.
According to the LLVM documentation when using GNU's libstdc++ clang
will not automatically link with -latomic. This is necessary since we
merged c++11 atomics support.
This fixes linking using Clang on Linux
Three canvas resize policies:
- `None`: Godot window settings are ignored.
- `Project`: Godot handles the canvas like a native app (resizing it
when setting the window size).
- `Adaptive`: Canvas size will always adapt to browser window size.
Use `None` if you want to control the canvas size with custom JavaScript
code.
This helps resolve issues where the project ndk version differs from the one pointed by the `ANDROID_NDK_ROOT` environment variable (if it exists).
(cherry picked from commit edeca16fb6)
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
In addition, add support for scaling and applying filter to the splash screen on Android.
One limitation of the api being used is that the splash screen aspect ratio is not maintained when it's scaled up.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
- Based on C++11's `mutex` and `condition_variable`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- Based on C++11's `mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- `BinaryMutex` added for special cases as the non-recursive version
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Based on C++14's `shared_time_mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
This makes it possibly to run Linux binaries compiled with udev support on
Linux systems which do not provide udev (typically systemd-less distros).
If udev is missing, we fall back to parsing `/dev/input` like when compiled
without udev support (`udev=no`).
Also adding some verbose debug statements to know which method we're using
when debugging Linux joypad issues.
The libudev so wrappers were generated on Mageia 8 with libudev 246.9 using
https://github.com/hpvb/dynload-wrapper:
```
./generate-wrapper.py --include /usr/include/libudev.h --sys-include '<libudev.h>' \
--soname libudev.so.1 --init-name libudev --omit-prefix gnu_ \
--output-header libudev-so_wrap.h --output-implementation libudev-so_wrap.c
```
(cherry picked from commits a10c259c1d
and e26a1f807b)
Edit: Updated to version 0.2 of dynload-wrapper to fix symbols clobbering as
done in #46143.
This is what GitHub Actions now provide and they removed the previous 21.3.6528147.
A bit annoying to have our hand forced this way but it's still 21.x so should be good
to upgrade.
(cherry picked from commit c730da8b20)
By generating stubs using https://github.com/hpvb/dynload-wrapper we
can dynamically load libpulse and libasound on systems where it is available.
Both are still a build-time requirement but no longer a run-time dependency.
For maintenance purposes the wrappers should not need to be re-generated
unless we want to bump pulse or asound to an incompatible version. It is
unlikely we will want to do this any time soon.
cherry-pick from 09f82fa6ea
`OS.get_screen_scale` will now return the `window.devicePixelRatio`
value, `OS.get_screen_dpi` uses CSS media queries to find approximate
DPI value for the current display.
`OS.get_screen_size` also return the actual screen size (not the CSS
pixel size).
Issues addressed:
a) Axis mappings were including virtual mouse axes on NVIDIA Shield TV.
The virtual mouse axes have the same axis numbers as the normal analog stick numbers. This was completely breaking joypad support on NVIDIA Shield TV.
b) Joypads were being tracked in a List with the index in the list being treated as the Godot device id.
If a device were to be removed, any device later in the list would be shifted, potentially causing future events with the shifted joypads to have incorrect IDs according to the Godot engine.
c) Unnecessary events were being sent to the Godot engine.
A check was added (per Joystick) that will prevent sending events for all axes when only a single axis value changed.
A similar check was added for "HATs".
See #45712
This is meant for users making custom builds to match the options used on
optimized, official builds.
This enables, on the platforms which support them:
- `use_static_cpp=yes` (portable binaries for Linux and Windows)
- `use_lto=yes` (link time optimizations - note: requires a lot of RAM!)
- `debug_symbols=no` (no debug symbols, smaller binaries)
Also abort when using MSVC with `production=yes`, as:
- It cannot optimize the GDScript VM like GCC or Clang do, leading to
significant performance drops.
- Its LTO support is unreliable, at least used to trigger crashes last
we tried it extensively.
All options can still be overridden if specified, and the `dev=yes` option
was changed to also support overrides.
(cherry picked from commit db26871210)
We used to only persist specific sub-folder of /home/web_user/ when
running the Web Editor. This resulted in bad UX about default project
creation path etc.
This PR makes the whole folder persistent, move the zip preloading to a
different folder (to avoid persisting it), and automatically prompt the
user to import it if present.
The canvas_id is `#`-prefixed to work with emscripten as a CSS selector.
When comparing to an event target ID (e.g. when checking if the canvas
is fullscreen, or is locking the mouse) we need to skip the first char
(the hash).
This has been enabled for years in official binaries, and users making custom builds
may end up not enabling it unknowingly, so it's best if we default to the same as
what official builds do.
The original reason for having it opt-in was likely the addition of a dependency on
libudev, but that should be fairly ubiquitous by now.
(cherry picked from commit e8b69fccbe)
This enables `-static-libgcc -static-libstdc++` which help make custom Linux
builds more portable (official builds have been using this option for years).
For some obscure reason Ubuntu 18.04 i386 crashes when using the option for
i386 builds, so let's play it safe and enable for x86_64 only for now.
(cherry picked from commit 1ebd66daff)
There are no guarantees that joypads are in event0-event32
range. Some devices, such as laptops with detachable keyboards
and wacom can reserve events all the way up to 32.
Some udev rules with e.g. custom controller firmwares may
load the device as /dev/input/eventX, where X is greater than
32.
This patch uses POSIX dirent to enumerate the event devices, so
entries outside 0-32 range are not skipped.
(cherry picked from commit 01c030f9b7)
Moved AppDelegate push notifications methods implementation to 'GODOT_ENABLE_PUSH_NOTIFICATIONS'
which can be used in plugins to implement APNS plugins.
(cherry picked from commit 366ce084f4)
No longer use emscripten functions for gamepads, implement them as
library functions in library_godot_display.js instead.
This allows us to do a better job at "guessing" vendorId, productId, OS,
etc. thus allowing us to better find the remapping for the controller.
Moved previously builtin modules 'GameCenter', 'AppStore', 'iCloud' to separate modules to be represented as plugin.
Modified 'ARKit' and 'Camera' to not be builtin into engine and work as plugin.
Changed platform code so it's not affected by the move.
Modified Xcode project file to remove parameters that doesn't make any effect.
Added basic '.gdip' plugin config file.
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
The previously used tool, `jarsigner` has been deprecated in favor of `apksigner` which is bundled with the Android SDK.
The logic is refactored accordingly and a few editor settings have been deprecated in the process as they're no longer necessary.
Note: As a side effect, specifying the Android SDK path is now required. The docs will be updated to reflect that change.
Otherwise we can get situations where platform-specific opts with the same name
can override each other depending on the order at which platforms are parsed,
as was the case with `use_static_cpp` in Linux/Windows.
Fixes#44304.
This also has the added benefit that the `scons --help` output will now only
include the options which are relevant for the selected (or detected) platform.
(cherry picked from commit 0f84d8dc49)
Fixes#42232.
And fixes memory leak with use of DirAccess, and harmonize the use of
the sanitized pkg name.
(cherry picked from commits 707a62783b
and 02d228554b)
Working, with emscripten > 2.0.9
Yes, the unreleased version. 2.0.9 works, but throws and error due to a
bug in emscripten with the thirdparty ENet library.
The issue is fixed upstream so newer releases will work.
