Fleshed out the "Optimize Mesh" options found in the mesh import UI
Gave a checkbox to every vertex attribute that can be compressed
Surfaced option to enable/disable Octahedral compression for
normal/tangent vectors
Also surfaces the vertex position compression option which previously
inaccessible because the defaults did not compress vertex positions
Supports all current importers (obj, fbx, collada, gltf)
Add new error type to BakeError to signalise that there is no root node to
start baking from.
Document the new error type, as well as BAKE_ERROR_NO_LIGHTMAPPER.
This reduces the size of the editor binaries significantly, as we otherwise
embed all WIP translations, including ones with very low completion ratios,
and end up paying for the size of all `msgid`s for each locale.
Cf. https://github.com/godotengine/godot-proposals/issues/3421 for details.
The thresholds used are:
- 30% for the editor interface (should already include most common strings
while more obscure ones like UndoRedo action names might be untranslated).
- 10% for the class reference: this is a HUGE resource and 10% is already
a lot of useful content, especially if focused on the most used APIs.
For 3.x, we also exclude languages that require complex text layout support
to be displayed properly.
This currently reduces the size of the editor binary by 17% on Linux.
The list will be synced manually every now and then.
Fix some typoed names from the doc
Add _index to "index" parameters of *_shape_* signals, this is both in doc and in the template. This makes the code, signature and doc easier to understand
Add method to get Node from the _index params of those signals. This was not as easy to find as one would expect. Putting this information where it is needed will help.
This patch fixes rendering of multiple reflection probes for a single
mesh in the GLES2 renderer. If there were two reflection probes, one of
them would always have the `interior` option flipped, resulting in
broken blending between probes and flickering of ambient reflection.
Also make note of GLES2 reflection probe limit
Very low wait times behave in unpredictable ways depending on the
rendered frame rate. This is because the timeout signal is only emitted
once per rendered frame (or physics frame, depending on the timer's
process mode).
This provides more realistic lighting with a very small performance cost.
The option is available in both GLES3 and GLES2, and can be enabled in
the Project Settings. This goes well with the ACES Fitted tonemapping mode
that was recently added.
When enabled, this also makes upgrading Godot 3.x projects to Godot 4.0 easier,
since lighting in 3.x will better match how it'll look in Godot 4.0.
Merge the PO translations with the new template.
This adds the following changes:
- 8000 strings are still valid as is (80%)
- 2000 strings are marked fuzzy and need reviewing (20%)
- 1000 strings are new and need translation
These are based on the `master` API from mid-2020 so they're somewhat outdated.
Some strings will be marked as fuzzy (needs review) and new strings will be
added in the next commit.
Change extract script `path` argument to support specifying multiple
paths, like `makerst.py`. This prevents parsing invalid XML files while
scanning the whole repository.
(cherry picked from commit 87d23bf85a)
Allows more flexible collision detection with different safe margin values.
Kinematic body motion changes in 2D and 3D:
-Recovery only for depth > min contact depth to help with collision
detection consistency (rest info could be lost if recovery was too much)
-Adaptive min contact depth (based on margin) instead of space parameter
This method extracts the 2 or 3-letter language code from `OS::get_locale()`,
making it easier for users to identify the "main" language code for users
that might have different OS locales due to different OS or region, but
should be matched to the same translation (e.g. "generic" Spanish).
Fixes#40703.
(cherry picked from commit def99c7baf)
This pull request adds a small amendment to `SceneTree` describing the behavior `_physics_process()` when pausing the scene.
`_physics_process` will completely stop processing collisions and signals whenever the scene is paused, however, the function will still receive calls.
This addresses: #47326
(cherry picked from commit d62175e009)
An attempt to improve the documentation for Thread
- Adds documentation on how and when the `wait_to_finish` should be used
- Adds a note on what to be careful about when using `wait_to_finish`
(cherry picked from commit 9e2882a989)
This makes setting up AudioStreamPlayer3D nodes for Doppler playback
a bit easier.
- Move AudioStreamPlayer3D's Doppler Tracking property outside a group
since the group only had 1 property, which resulted in unnecessary
folding in the inspector.
- Put the AudioStreamPlayer3D Playing and Autoplay properties higher up
in the inspector since these are likely to be modified often.
Browsers doesn't really like forcing the mix rate, e.g. Firefox does not
allow input (microphone) if the mix rate is not the default one, Chrom*
will exhibit worse performances, etc.
Implements per-pixel transparency feature on Android.
Allows plugins to do specific rendering and render godot UI on top
(useful for camera support with drawing on top).
The PVS mode enum had been declared using scope operator, which does not seem to work correctly from GDScript with the BIND_ENUM_CONSTANT macro.
This PR removes the scope operator in the declaration.
For both 2D and 3D, three methods are added:
- `get_floor_angle` on `KinematicBody` to get the floor angle.
- `get_angle` on `KinematicCollision` to get the collision angle.
- `get_last_slide_collision` to quickly get the latest collision of `move_and_slide`.
This is already supported by FreeType, but it wasn't exposed.
Adding support for WOFF2 would require linking a Brotli decompression
library in Godot, so only WOFF1 is exposed here.
Update mesh_surface_get_format_stride and
mesh_surface_make_offsets_from_format to return an array of offsets and
an array of strides in order to support vertex stream splitting
Update _get_array_from_surface to also support vertex stream splitting
Add a condition on split stream usage to ensure it does not get used on
dynamic meshes
Handle case when Tangent is compressed but Normal is not compressed
Make stream splitting option require a restart in the settings
Update SoftBody and Sprite3D to support and use strides and offsets
returned by updated visual_server functions
Update Sprite3D to use the dynamic mesh flag
* Make Undo/Redo menu items disabled when clicking it does nothing.
* Context menu of `TextEdit`
* Context menu of `LineEdit`
* Editor's Scene menu
* Script editor's Edit menu and context menu (for Script and Text)
* Make editor undo/redo log messages translatable.
* Mark `UndoRedo`'s `has_{un,re}do()` methods as `const`.
* Expose `TextEdit`'s `has_{un,re}do()` to scripts since `{un,re}do()` are already available.
Add framework for supporting geometrical occluders within rooms, and add support for sphere occluders.
Includes gizmos for editing.
They also work outside the portal system.
This is only available on the GLES3 backend.
This can be useful for advanced shaders, but it should generally
not be enabled otherwise as full precision has a performance cost.
For general-purpose rendering, the built-in debanding filter should
be used to reduce banding instead.
This is done by providing API access to app specific directories which don't have any limitations and allows us to bump the target sdk version to 30.
In addition, we're also bumping the min sdk version to 19 as version 18 is no longer supported by Google Play Services and only account of 0.3% of Android devices.
Change incorrect `[/code]` closing tags to `[/url]` tags.
The `url` tags for the links to the Unicode code points information use `[/code]` rather than `[/url]` to close them.
This results in the links being rendered incorrectly in the IDE--the entire rest of the documentation for each method gets turned into a giant underlined link.
This issue was introduced in a2271ba3bd.
(cherry picked from commit b85688ac7d)
This backports the high quality glow mode from the `master` branch.
Previously, during downsample, every second row was ignored.
Now, when high-quality is used, we sample two rows at once to ensure
that no pixel is missed. It is slower, but looks much better and has
a much high stability while moving.
High quality also takes an additional horizontal sample the width of the
horizontal blur matches the height of the vertical blur.
Same thing that was already done in 2D, applies moving platform motion
by using a call to move_and_collide that excludes the platform itself,
instead of making it part of the body motion.
Helps with handling walls and slopes correctly when the character walks
on the moving platform.
Also made some minor adjustments to the 2D version and documentation.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
When synchronizing KinematicBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
Fixed a bug in the complex PVS generation which was causing recursive loop.
Move some of the settings out of RoomManager into Project Settings.
Allow PVS generation method to be selected from Project Settings, and control PVS logging.
If enabled, key/touch/joystick events will be flushed just before every idle and physics frame.
Enabling this can greatly improve the responsiveness to input, specially in devices that need to run multiple physics frames per each idle frame, because of not being powerful enough to run at the target frame rate.
This will only work for platforms using input buffering (regardless event accumulation). Currenly, only Android does so, but could be implemented for iOS in an upcoming PR.
For the time being we don't support writing a description for those, preferring
having all details in the method's description.
Using self-closing tags saves half the lines, and prevents contributors from
thinking that they should write the argument or return documentation there.
(cherry picked from commit 7adf4cc9b5)
- Now able to display up to 32 layers in physics (still 20 for render)
- Adjustable grid size to fit available space in dock
- Expansion icon to display more layers vertically
- Layer numbers in cells to help with selection
Implement Octahedral Compression for normal/tangent vectors
*Oct32 for uncompressed vectors
*Oct16 for compressed vectors
Reduces vertex size for each attribute by
*Uncompressed: 12 bytes, vec4<float32> -> vec2<unorm16>
*Compressed: 2 bytes, vec4<unorm8> -> vec2<unorm8>
Binormal sign is encoded in the y coordinate of the encoded tangent
Added conversion functions to go from octahedral mapping to cartesian
for normal and tangent vectors
sprite_3d and soft_body meshes write to their vertex buffer memory
directly and need to convert their normals and tangents to the new oct
format before writing
Created a new mesh flag to specify whether a mesh is using octahedral
compression or not
Updated documentation to discuss new flag/defaults
Created shader flags to specify whether octahedral or cartesian vectors
are being used
Updated importers to use octahedral representation as the default format
for importing meshes
Updated ShaderGLES2 to support 64 bit version codes as we hit the limit
of the 32-bit integer that was previously used as a bitset to store
enabled/disabled flags
Added additional param to action related methods to test for exactness.
If "p_exact_match" is true, then the action will only be "matched" if the provided input event *exactly* matches with the action event.
Before:
* Action Event = KEY_S
* Input Event = KEY_CONTROL + KEY_S
* Is Action Pressed = True
Now:
You can still do the above, however you can optionally check that the input is exactly what the action event is:
* Action Event = KEY_S
* Input Event = KEY_CONTROL + KEY_S
* p_exact_match = True
* Is Action Pressed = False
* If the Input Event was only KEY_S, then the result would be true.
Usage:
```gdscript
Input.is_action_pressed(action_name: String, exact_match: bool)
Input.is_action_pressed("my_action", true)
InputMap.event_is_action(p_event, "my_action", true)
func _input(event: InputEvent):
event.is_action_pressed("my_action", false, true) # false = "allow_echo", true = "exact_match"
event.is_action("my_action", true)
```
Co-authored-by: Eric M <itsjusteza@gmail.com>
The default autoplace algorithm places instances in the highest priority Room. It became apparent that there are some situations in which users will want to override this and force placement in a Room from a particular RoomGroup, especially an "outside" RoomGroup.
This setting allows the user to specify a preference for Room priority. When set to 0, the setting is ignored and the highest priority Room is chosen.
Higher values will make indirect lighting brighter.
A value of 1.0 represents physically accurate behavior, but higher values
can be used to make indirect lighting propagate more visibly when using
a low number of bounces.
This can be used to speed up bake times by lowering the number of bounces
then increasing the bounce indirect energy. Unlike BakedLightmapData's
energy property, this property does not affect direct lighting
emitted by light nodes or emissive materials.
This pull request fixes an assortment of typos and improves conciseness in `Animation`, `Area2D`, `Array`, `ArrayMesh`, `Control`, `Directory`, `EditorPlugin`, `Engine`, and `OS`.
(cherry picked from commit 9a72b0d3d0)
Investigations have showed that a lot of the random variation in frame deltas causing glitches may be due to sampling the time at the wrong place in the game loop.
Although sampling at the start of Main::Iteration makes logical sense, the most consistent deltas may be better measured after the location likely to block at vsync - either the OpenGL draw commands or the SwapBuffers.
Here we add an experimental setting to allow syncing after the OpenGL draw section of Main::Iteration.
Implemented splitting of vertex positions and attributes in the vertex
buffer
Positions are sequential at the start of the buffer, followed by the
additional attributes which are interleaved
Made a project setting which enables/disabled the buffer formatting
throughout the project
Implemented in both GLES2 and GLES3
This improves performance particularly on tile-based GPUs as well as
cache performance for something like shadow mapping which only needs
position data
Updated Docs and Project Setting
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
Fixing by applying the movement in two steps, first the platform
movement, and then the body movement. Plus, add the platform movement
when we are on_wall.
Frame deltas are currently measured by querying the OS timer each frame. This is subject to random error. Frame delta smoothing instead filters the delta read from the OS by replacing it with the refresh rate delta wherever possible.
This PR also contains code to estimate the refresh rate based on the input deltas, without reading the refresh rate from the host OS.
This pull request adds a missing method description to `PopupMenu`.
This completes the documentation for `PopupMenu` and enhances usability by doing so.
Update doc/classes/PopupMenu.xml
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
(cherry picked from commit 2e3cbbcd11)
When appending text (either via `set_text()` or by pasting from clipboard),
if the input would make the `LineEdit` exceed its configured `max_length`,
the input text is truncated to fit. The discard part is passed as a parameter
in the `text_change_rejected` signal.
Fixes#33321.
Fixes#41278.
Also cleaned up unimplemented `max_chars` property in `TextEdit`.
Co-authored-by: Tony-Goat <70238376+Tony-Goat@users.noreply.github.com>
(cherry picked from commit 9a1ce8e6c3)
Clean: remove duplicate and interior vertices (uses Bullet algorithm)
Simplify: modify the geometry for further simplification (uses VHACD
algorithm)
In the editor, single convex hull now uses the clean option.
Added a new editor entry to create a simplified convex hull, can be
useful for creating convex hull from highly tessellated triangle meshes.
Specific change for 3.x:
Add support for Vector<Vector3> and PoolVector<Vector3> in the convex hull generator.
This pull request adds several descriptions to multiple different classes.
This improves the completeness of the documentation and enhances usability by doing so.
(cherry picked from commit 27e9df7778)
Fix more cases of node path needing an update when nodes are renamed or
moved in the editor.
Built-in node properties:
Before, node paths were checked only for script export variables. Now
all properties are checked from the node, which includes built-in node
properties.
Allows proper node path updates for nodes like remote transform, physics
joints, etc.
Arrays and dictionaries:
Node paths nested in array and dictionary properties are now also
updated in the editor.
Also update the documentation to be clear about node path update in the
editor and at runtime.
Co-authored-by: latorril <latorril@gmail.com>
(cherry picked from commit 3e4e530523)
This commit adds a new method to the `InputMap`, allowing the user to get the value of an action's dead zone as a float.
(cherry picked from commit c6f28ed62b)
