1024 KB was low enough that many users seem to hit it, which can lead to the
editor freezing.
The proper fixed as described in #35653 would be to implement a page allocator
to prevent this overflow, but as a stop-gap measure, we can increase the
default value to a more lenient 4096 KB which should be high enough for the
vast majority of use cases.
The default size can be brought down again if/when #35653 is properly fixed,
and if it's actually relevant from a memory point of view.
(cherry picked from commit 5009ba54b2)
- immediately return if A == B;
- first and last elements (front, back) are updated upon relinking;
- handles a special case of forward and backward adjacent elements.
(cherry picked from commit ac69f092fc)
Add __NetBSD__ to `platform_config.h` so that it can find `alloca`
and use the proper `pthread_setname_np` format.
Rename RANDOM_MAX to avoid conflict with NetBSD stdlib.
Fixes#42145.
(cherry picked from commit 5f4d64f4f3)
And revert follow-up regression fix "Remap script path when registering class."
After the regression fix, the original issue is valid again so it's better
to go back to the previous state.
This reverts commits e264ae20d2 and
fceb64827e.
(cherry picked from commit f13207254c)
Prevents adding new octants until a limiting number of elements have been added to the current octant. This enables balancing the benefits of brute force against the benefits of spatial partitioning. The limit can be set per octree.
Project settings are added for rendering octree to set the best balance per project depending on number of tests per frame / tick, and the amount of editing of the octree.
Fixes octants being leaked when removing elements.
Optimize octree with cached linear lists
Storing elements in octants using linked lists is efficient for housekeeping but very slow for testing. This optimization stores additional local_vectors with Element pointers and AABBs which are cached and only updated when a dirty flag is set on the octant.
This is selectable with 2 versions of Octree : Octree and Octree_CL, Octree being the old behaviour. At present the cached list version is only used for the visual server octree (rendering) as it has only been demonstrated to be faster there so far.
This uses slightly more memory (probably a few kb in most cases) but can be significantly faster during testing (culling etc).
Co-authored-by: Sergey Minakov <naithar@icloud.com>
New contributors added to AUTHORS:
@hinlopen, @naithar, @rrcore, @SkyLucilfer, @TwistedTwigleg
Thanks to all contributors and donors for making Godot possible!
---
Also changes to relevant code that parses the DONORS.md to match
the new tiers.
(cherry picked from commit d2d4c1c957)
Was causing `class_name`-defined scripts to not being loaded in exported
games due to the remap from `*.gd` to `*.gdc`/`*.gde`.
(cherry picked from commit fceb64827e)
- Enhance directory API
- Fix `FileAccess::exists()` not checking for PackedData being disabled
- Fix moving to the parent directory (`..`)
- Allow absolute paths in existence checks
Depending on the device implementation, editor actions could be
received with different action ids or not at all for multi-line.
Added a parameter to virtual keyboards to properly handle single-line
and multi-line cases in all situations.
Single-line:
Input type set to text without multiline to make sure actions are sent.
IME options are set to DONE action to force action id consistency.
Multi-line:
Input type set to text and multiline to make sure enter triggers new lines.
Actions are disabled by the multiline flag, so '\n' characters are
handled in text changed callbacks.
UDPServer now uses a single socket which is shared with the
PacketPeerUDP it creates and has a new `poll` function to read incoming
packets on that socket and delivers them to the appropriate peer.
PacketPeerUDP created this way never reads from the socket, but are
allowed to write on it using sendto.
This is needed because Windows (unlike Linux/BSD) does not support
packet routing when multiple sockets are bound on the same address/port.
(cherry picked from commit 147bbe2155)
- Use the `.log` file extension (recognized on Windows out of the box)
to better hint that generated files are logs. Some editors provide
dedicated syntax highlighting for those files.
- Use an underscore to separate the basename from the date and
the date from the time in log filenames. This makes the filename
easier to read.
- Keep only 5 log files by default to decrease disk usage in case
messages are spammed.
(cherry picked from commit 20af28ec06)
Current error checks for to_int and to_int64 do not issue overflow error
messages for INT64_MAX + 1, INT64_MAX + 2, and others close to the
limits. Likewise, error checks for hex_to_int, hex_to_int64 and bin_to_int64
issue false positive error messages for INT64_MIN or INT32_MIN. This commit
fixes these error checks.
Fix calculation for negative times to ensure Sundays are wrapped around to '0'
instead of '7', making it consistent with the output for positive times.
(cherry picked from commit aae5f246ff)
This reverts commit 7f61710183.
See #38868, in its current implementation a small skew value might end up
serialized to scene files due to floating point precision errors, which is
detrimental to VCS.
This can be cherry-picked anew once a fix for #38868 has been found.
- Fixed floating point issue on the old one.
- Fixed the equation on the get_euler_yxz function.
- Added unit tests.
This work has been kindly sponsored by IMVU.
(cherry picked from commit 2331300989)
Godot currently supports zero padding for integers, octals and
hexadecimals when using format strings, but not for floats.
This commit adds support for zero padding for floats, thus ensuring
consistent behavior for all types, and making Godot's format specifiers'
behavior closer to c's `printf()`.
Before: `print("<%07.2f>" % -0.2345)` prints `< -0.23>`.
Now: `print("<%07.2f>" % -0.2345)` prints `<-000.23>`.
`print("<%7.2f>" % -0.2345)` prints `< -0.23>`.
(cherry picked from commit b7d835d9ca)
Note:
Casting to the C++ classes and calling the methods there would work as well,
but would require including he header files for the specific object types handled
here, which wouldn't be OK either.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
Each time `r_err_str` is set, we should return a parse error.
Removed redundant `return OK;` which were already handled after the big
`if`/`else if`/`else` for `TK_IDENTIFIER`.
Part of #17372.
(cherry picked from commit e7ebda975a)
Affects per-pixel transparency
The current method renders to the screen by copying the GLES output to a
DIB for transparency using the CPU instead of rendering directly to the
window via the GPU. This is slower and also forces the window to be borderless
as WS_EX_LAYERED affects the non-client region as well.
This change uses DWMEnableBlurBehindWindow which allows using the standard
glClearColor() background alpha and is also performed through the GPU,
eliminating CPU bottlenecks
Now the stack saved in a `GDScriptFunctionState` is cleared as soon as the `yield()` operation is known not to be resumed because either the script, the instance or both are deleted.
This clears problems like leaked objects by eliminating cases of circular references between `GDScriptFunctionState`s preventing them and the objects they refer to in their saved stacks from being released. As an example, this makes using `SceneTreeTimer` safer.
Furthermore, with this change it's now possible to print early warnings about `yield()`s to released script/instances, as now we know they won't be successfully resumed as the condition for that happens. However, this PR doesn't add such messages, to keep the observed behavior the same for the time being.
Also, now a backup of the function name in `GDScriptFunctionState` is used, since the script may not be valid by the time the function name is needed for the resume-after-yield error messages.
Skew is x-axis only, because it must be bidirectionally convertible to a 2x3 matrix, but you can subtract it to the rotation to get the effect on y-axis
(cherry picked from commit efb1f7d76b)
`OS.shell_open()` will pass on the path directly to the OS' shell
handler (which can handle file paths or URLs). It can't handle
Godot-specific paths, so these need to be converted with
`ProjectSettings.globalize_path()` first.
(cherry picked from commit d46e411b44)
This fixes numerous false positives coming out of the culling system.
AABB checks are now a full separating-axis check against the frustum, with the points of the frustum being compared to the planes of the box just as the points of the box were being compared to the planes of the frustum. This fixes large objects behind the camera not being culled correctly.
Some systems that used frustums that were (sometimes mistakenly?) unbounded on one or more side have been modified to be fully enclosed.
This moves the instance id member from Variant to the ObjectRC so that Variant is still the same size as before the fix (and also regardless if debug or release build).
This commit addresses multiple issues with `Variant`s that point to an `Object`
which is later released, when it's tried to be accessed again.
Formerly, **while running on the debugger the system would check if the instance id was
still valid** to print warnings or return special values. Some cases weren't being
warned about whatsoever.
Also, a newly allocated `Object` could happen to be allocated at the same memory
address of an old one, making cases of use hard to find and having **`Variant`s pointing
to the old one magically reassigned to the new**.
This commit makes the engine realize all these situations **under debugging**
so you can detect and fix them. Running without a debugger attached will still
behave as it always did.
Also the warning messages have been extended and made clearer.
All that said, in the name of performance there's still one possible case of undefined
behavior: in multithreaded scripts there would be a race condition between a thread freeing
an `Object` and another one trying to operate on it. The latter may not realize the
`Object` has been freed soon enough. But that's a case of bad scripting that was never
supported anyway.
The `TextEdit` one was indeed a potential bug.
The `PCKPacker` one seems to be a false positive, it's already in a
`for` loop that depends on `files.size()`.
(cherry picked from commit ca4e4506db)
The minimum slider value no longer allows decreasing the value below
the default, as this can cause things to break in the editor.
The maximum slider value was also increased to 4096 since it can safely
be increased to that value (some add-ons may require it).
This closes#37052.
(cherry picked from commit 8d8c7a9383)
Namely, move the drive dropdown to just the left of the path text box and don't include the former
in the latter.
This improves the UX on Windows.
In the UNIX case, since its concept of drives is (ab)used to provide shortcuts to useful paths, its
dropdown is kept at the original location.
UDP sockets can be "connected" to filter packets from a specific source.
In case of a bound socket (e.g. server), a new socket can be created on
the same address/port that will receive all packets that are not
filtered by a more specific socket (e.g. the previously connect socket).
This way, a UDPServer can listen to new packets, and return a new
PacketPeerUDP when receiving one, knowing that is a "new client".
Pith bend message now has correct size (was 2 bytes instead of 3).
Recognized (but not implemented) 0xF? messages. SysEx messages will be reocognized as such, but their contents will be ignored.
Fixes#26637.
Fixes#19900.
The viewport_size returned by get_viewport_size was previously incorrect, being half the correct value. The function is renamed to get_viewport_half_extents, and now returns a Vector2.
Code which called this function has also been modified accordingly.
This PR also fixes shadow culling when using ortho cameras, because the correct input for CameraMatrix::set_orthogonal should be the full HEIGHT from get_viewport_half_extents, and not half the width.
It also fixes state.ubo_data.viewport_size in rasterizer_scene_gles3.cpp to be the width and the height of the viewport in pixels as stated in the documentation, rather than the current value which is half the viewport extents in worldspace, presumed to be a bug.
We used a lock signals in the signal_map while emitting, because it was
not allowed to disconnect them while being emitted.
We used that lock to check if we where deleting an object during signal
emission.
Now that we allow to disconnect signals while they are being emitted, if
an object first disconnects, then gets deleted we can't know that a
signal was being emitted during the destructor.
This commit adds a new `_emitting` boolean member to Object to be set
while emitting and checked in the destructor, while removing the old
signal lock which is now unused.
Used to allocate in stack (via alloca) which causes crashes when trying
to encode big variables.
The buffer grows as needed up to `encode_buffer_max_size` (which is
8MiB by default) and always in power of 2.
According to 22637beb2e (commitcomment-36651823)
and as confirmed by @reduz, this seems not to be necessary now that we
copy-on-write.
This triggered freeze scenarios in cases where a node would be deleted
while being used as a target in a signal emission.
Fixes#34650.
Fixes#34769.
Now those two errors go back to reporting:
```
ERROR: emit_signal: Condition ' !target ' is true. Continuing..:
At: core/object.cpp:1191.
```
Avoids crashes on debug mode. Instead it now breaks the execution and
show the error in-editor. Will still crash on release.
Also add a similar check to Marshalls to ensure the debugger doesn't
crash when trying to serialize the invalid instance.
Unify pack file version and magic to avoid hardcoded literals.
`version.py` now always includes `patch` even for the first release in
a new stable branch (e.g. 3.2). The public name stays without the patch
number, but `Engine.get_version_info()` already included `patch == 0`,
and we can remove some extra handling of undefined `VERSION_PATCH` this
way.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
It will now give information about the originating object instance
and when locked, the target callback.
This should help debugging editor and game issues that are now being
reported due to adding signal locking in
22637beb2e.
Some cases were not handled properly for Polygon2D after making changes in common code to fix Line2D antialiasing. Added an option for drawing polygons to differentiate the two use cases.
Fixes#34568
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
The calculation used to be wrong when exactly at a power of 2.
`nearest_shift` always return the "next" power of 2
`nearest_shift(4) == 3 # 2^3 = 8`.
On the other hand `next_power_of_2` returns the exact value if that
value is a power of 2 (i.e. `next_power_of_2(4) == 4`).
I.e. :
```
WARN_PRINT(itos(next_power_of_2(4)) + " " + itos(1 << nearest_shift(4)));
// WARNING: ... : 4 8
```
Is this by design?
Before this fix, opening relative export paths inside of an EditorFileDialog was not possible. This was fixed by modifying String::path_to_file() to save relative paths in EditorExportPreset::set_export_path() more appropriately and changing EditorFileDialog::set_current_dir() to open relative paths.
Near matching was not implemented like in TranslationServer, so a
resource remapped for 'ru' (but not 'ru_RU') would not be used as
fallback if the system locale was 'ru_RU'.
Fixes#34058.
The previous code only parsed the first two characters (potentially reading
out of bounds if input was invalid), but some locales use a 3-letter language
code (e.g. 'nah_MX').
So I refactored the logic a bit to properly parse the locale and extract the
part left of the regional code, if provided (supports both 'en_US' and 'en-US'
style).
I made TranslationServer::get_language_code() public as I'll use it in a
follow up commit.
Underscaled arc tolerance produced very small values so that changes
to this parameter were negligible when scaled internally, hence significant
performance drop (lots of intermediate points inserted in an arc). Now the
performance is mostly the same compared to other types of offsetting
(SQUARE, MITER).
Polygon2D:
The property wasn't used anymore after switching from canvas_item_add_polygon() to canvas_item_add_triangle_array() for drawing.
Line2D:
Added the same property as for Polygon2D & fixed smooth line drawing to use indices correctly.
Fixes#26823
This makes it possible to know whether the window is focused
at a given time, without having to track the focus state manually
using `NOTIFICATION_WM_FOCUS_IN` and `NOTIFICATION_WM_FOCUS_OUT`.
This partially addresses #33928.
This allows setting the `read_chunk_size` of the internal HTTPClient.
This is important to reduce the allocation overhead and number of file
writes when downloading large files, allowing for better download speed.
s * edge0 = -d / a * edge0 = -edge0⋅v0 / (edge0⋅edge0) * edge0 = vector projection of -v0 onto edge0
By incorrectly using -e/c instead of -d/a, Face3::get_closest_point_to was returning the wrong point in certain cases. Specifically, I noticed it returning vertex[0] when it should have been returning vertex[1].
Messages coming from ERR_EXPLAIN / ERR_*_MSG macros used to strip the
error explanation in release builds and was changed in a recent
refactoring.
This commit restores the old behaviour (fixing release builds).
Assigns a default value in VMap and HashMap when new keys are created using
the array operator so they are the same as the other Map classes.
The non const version of the array operator can be used for both assigning a
value and retrieving a writeable version. In the Map template classes the
assign version is being used to create new keys, but sometimes not assigning
a value when retrieving a writeable version.
This does not address the problem that the default value may not be the
correct one, and it does not address the problem that new keys probably
should not be created when the array operator is used. These problems will
be addressed in a separate commit.
Implemented uniform API in Viewport class to override 2D and/or
3D camera.
Added buttons in 2D and 3D editor viewport toolbars that override
the running game camera transform with the editor viewport camera
transform. Implemented via remote debugger protocol and camera
override API.
Removed LiveEditFuncs function pointers from ScriptDebugger class.
Since the debugger got access to the SceneTree instance (if one
exists), there is no need to store the function pointers. The live
edit functions in SceneTree are used directly instead. Also removed
the static version of live edit functions in SceneTree for the same
reason. This reduced the SceneTree -> Debugger coupling too since
the function pointers don't need to be set from SceneTree anymore.
Moved script_debugger_remote.h/cpp from 'core/' to 'scene/debugger/'.
This is because the remote debugger is now using SceneTree directly
and 'core/' classes should not depend on 'scene/' classes.
Previously, disabled points will not be considered when performing
get_closest_point. This commit changes that by introducing an additional
flag for this behavior. Related issue: #31814
- Use "B" insted of "Bytes" to be more compact
- Use suffixes that denote a binary prefix
- Make suffixes localizable
This removes the need for the custom
`EditorNetworkProfiler:_format_bandwidth()` method.
Similarly to `Vector2` and `Rect2` transforms in 2D and Vector3, Plane,
and AABB in 3D. PoolVector2Array and PoolVector3Array were the only
missing Variant types in both Transform2D and Transform respectively.
The description is displayed as a tooltip when hovering the project
in the Project Manager. It can span multiple lines.
This partially addresses #8167.
Previously it was only possible to create custom script templates per
editor instance which could lead to certain name collisions, but now one
can create such templates per project tailored for specific use cases.
The default path to search for custom script templates is defined in
project settings via `editor/script_templates_search_path` setting as
`res://script_templates` path, yet this can be configured per project.
Templates have at most two origins now:
1. Project-specific, defined in `ProjectSettings`, for instance:
- res://script_templates/
2. Editor script templates, for instance:
- %APPDATA%/Godot/script_templates/
As script templates can have the same name over different paths,
the override mechanism was also added, enabling project-specific
templates over the editor ones.
connect_to_stream now accepts optional parameter to specify which
certificates to trust.
Implement accept_stream (SSL server) with key/cert parameters to specify
the RSA key and X509 certificate resources.
The last remaining ERR_EXPLAIN call is in FreeType code and makes sense as is
(conditionally defines the error message).
There are a few ERR_EXPLAINC calls for C-strings where String is not included
which can stay as is to avoid adding additional _MSGC macros just for that.
Part of #31244.
Condensed some if and ERR statements. Added dots to end of error messages
Couldn't figure out EXPLAINC. These files gave me trouble: core/error_macros.h, core/io/file_access_buffered_fa.h (where is it?),
core/os/memory.cpp,
drivers/png/png_driver_common.cpp,
drivers/xaudio2/audio_driver_xaudio2.cpp (where is it?)
So far we left most temporary files lying around, so this attempts to
fix that.
I added a helper method to DirAccess to factor out the boilerplate of
creating a DirAccess, checking if the file exists, remove it or print
an error on failure.
This reproduces the behavior used for printing when using the remote
debugger. The default limit is 100 errors and 100 warnings per second,
which makes it possible to display much more GDScript warnings
before overflowing.
This also adds a "Too many warnings" message, so that warnings
don't look like errors when overflowing anymore.
This closes#21896.
These silently fail, so they should be removed. I accidentally added most of these last year, trying to make everything else consistent with Quat, sorry!
Also, a few tiny nitpicking changes are included, like whitespace and misspellings.
Fixes this warning:
```
./core/os/dir_access.h:74:17: warning: 'virtual String DirAccess::get_next(bool*)' was hidden [-Woverloaded-virtual]
```
Part of #30790.
This was a regression in 3.1 and later from the new inspector, where
PROPERTY_HINT_SPRITE_FRAME was not fully re-implemented. It's meant to
be a normal PROPERTY_HINT_RANGE which also automatically increments its
value when keyed in the animation player.
To avoid code duplication, I made the frames properties use the actual
PROPERTY_HINT_RANGE and introduced a PROPERTY_USAGE_KEYING_INCREMENTS
usage flag instead.
Also allow lifting the decimal step formatting with a hint range step
of 0. A new `range_step_decimals()` is added for this to avoid breaking
compatibility on the general purpose `step_decimals()` (which still
returns 0 for an input step of 0).
Supersedes #25470.
Partial fix for #18251.
"posmod" is the integer version of "fposmod". We do not need a "mod" because of the % operator.
I changed the default arg names from "x" and "y" to "a" and "b" because they are not coordinates. I also changed pow's arg names to "base" and "exp". Also, I reorganized the code in the VS built-in funcs switch statement.
Addresses #30068
This is a prerequisite for allowing proper support for fixed timestep interpolation, exposing the interpolation fraction to the engine, modules and gdscript.
The interpolation fraction is the fraction through the current physics tick at the time of the current frame.
Rémi Verschelde
PouleyKetchoupp
Andrii Doroshenko (Xrayez)
Yilin Ma
Aaron Franke
Tomasz Chabora
Hugo Locurcio
Marcel Admiraal
bruvzg
Pedro J. Estébanez
Yakov Borevich
lawnjelly
Fabio Alessandrelli
Marcel Schneider
Wilson E. Alvarez
Nathan Franke
Adam Bates
Maganty Rushyendra
Paul Herman
Sergey Minakov
Andy Maloney
Andrea Catania
ntfs.hard
azagaya
SkyJJ
Thakee Nathees
Technohacker
HaSa1002
Juan Linietsky
Kiri Jolly
Tobias Mansfield-Williams
Vasiliy Makarov
Michael Alexsander
Zak Grumbles
Yuri Roubinsky
Bastiaan Olij
sumit0190
Mateo Dev .59
clayjohn
Haoyu Qiu
dankan1890
nathanwfranke
Bruno Lourenço
Ovnuniarchos
Eric Rybicki
George Marques
Ignacio Etcheverry
Joost Heitbrink
sheepandshepherd
Danil Alexeev
Rafał Mikrut
volzhs
Catchawink
TerminalJack
あるる / きのもと 結衣
Patrick Wuttke
Emmanuel Leblond
Artem Burjachenko
stoofin
Shiqing
Jamie Pate
Saracen
unknown
Hanif Bin Ariffin
Erik
Cagdas
Gianlluca
Alexander Holland
Bojidar Marinov
Ruslan Mullayanov
Damian Day
Florian Kothmeier
Marios Staikopoulos
fhuya
Cameron Reikes
Valentin Zagura
jfons
huisedenanhai
iwek7
Bhupendra Aole
RaphaelHunter
Robin Hübner
Paul Trojahn
Braden Bodily
Davide Busterna
Charlène
IAmActuallyCthulhu
Marc Gilleron
TGRCDev
willnationsdev
santouits
Andrettin