Two common problems have emerged as a result of transform snapping:
1) Camera jitter with a camera following a snapped object
2) Pixel gaps between e.g. a platform and a player, where a platform rounds down and a player rounds up
Using round seems to greatly reduce problems due to camera jitter. It also may prove better for pixel gaps because pixel art is often designed on a grid, so whole numbers are too expected, which are unstable with floor().
Having white or strongly desaturated debug collision shape color
setting would make it harder to visualize enabled / disabled state.
This change makes it easier to visualize enabled / disabled state
by reducing the alpha color by half when disabled.
(cherry picked from commit 0c4594f6c9)
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
- Based on C++11's `mutex`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed
- Simpler for `NO_THREADS`
- `BinaryMutex` added for special cases as the non-recursive version
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
This change does two things:
1. Properly update the internal shape data using _update_in_shape_owner
when updating a shape (in 2D it was resetting one way collision)
2. Avoid unnecessary updates when calling set_shape with the same shape,
which happens each time a shape property is modified
(e.g shape.extents.x = ...)
Fixes#45090
(cherry picked from commit 4b43cd17c5)
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
(cherry picked from commit b5334d14f7)
Body transforms from physics are used to setup the joint and they are
only updated before the physics step by default.
Without forcing the transform update, joints could use a previous
position if the body's position was set after it was added to the scene.
3D physics is not affected by this issue.
(cherry picked from commit 11bee25de4)
Partially revert change allowing sprite get_rect snapping to be controlled by `pixel_snap` again rather than `transform_snap` (to prevent breaking compatibility). Adds a final `use_camera_snap` project setting to allow snapping viewports as in reduz original PR.
Changed CPU velocity calculation for EMISSION_SHAPE_DIRECTED_POINTS
to follow the same logic as in the GPU version:
mat2 rotm;
rotm[0] = texelFetch(emission_texture_normal, emission_tex_ofs, 0).xy;
rotm[1] = rotm[0].yx * vec2(1.0, -1.0);
VELOCITY.xy = rotm * VELOCITY.xy;
Now both CPUParticles2D & CPUParticles3D (z disabled) show the same results
as their GPU counterparts and take the initial velocity settings into account.
(cherry picked from commit 1c231cacb3)
`ConvexPolygonShape2D` and `ConcavePolygonShape2D` are only meant to be
used directly in code and not in the editor for physics-based use cases
specifically.
Developers are advised to use `CollisionPolygon2D` instead, which does
generate those shapes under the hood, handling polygon convexivity,
proper orientation etc.
(cherry picked from commit dc446203be)
This reverts commit 7f61710183.
See #38868, in its current implementation a small skew value might end up
serialized to scene files due to floating point precision errors, which is
detrimental to VCS.
This can be cherry-picked anew once a fix for #38868 has been found.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
(cherry picked from commit cd4e46ee65)
Skew is x-axis only, because it must be bidirectionally convertible to a 2x3 matrix, but you can subtract it to the rotation to get the effect on y-axis
(cherry picked from commit efb1f7d76b)
Calls to set_amount can increase the size of the particle array, but do not zero the memory, they only set the active flag to false. This uninitialized memory can be sent to the GPU, possibly as NaNs.
The code above for horizontal movement uses the right margin (_positive_ x direction) when the offset is negative, but vertical movement uses the top margin (_negative_ y direction) when the offset is negative.
The resulting problem is easily seen in the editor — set the drag margins to be asymmetrical, turn on drawing the drag margins, and slide the offsets from -1 to 1 and back. The horizontal offset moves the camera's center between the left and right margins, but the vertical offset gets them backwards and will move the camera outside the margins entirely.
(cherry picked from commit 40816574ac)
- Add some missing descriptions.
- Add links to tutorials for ARVR and AnimationTree.
- Style fixes.
- Engine changes:
* Make `AnimationNodeTransition.input_<number>` properties internal
so that they don't appear in the docs. They still appear in the
inspector based on the actual number of inputs requested.
* Drop unimplemented `CPUParticles.flatness`. It's only used for 3D
particles in `ParticlesMaterial`, and thus only relevant for
`CPUParticles3D`.
When there is no collision with a floor the get_floor_normal() function
should return the zero vector to be consistent with get_floor_velocity().
Renames floor_normal to up_direction in all bindings.
Updates the documentation of get_floor_normal() and get_floor_velocity()
to make it clear when the values are valid. Updates the documentation for
move_and_slide() and move_and_slide_with_snap() to use the new up_direction
parameter name.
Some cases were not handled properly for Polygon2D after making changes in common code to fix Line2D antialiasing. Added an option for drawing polygons to differentiate the two use cases.
Fixes#34568
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
In the 3D version:
- Partially revert #20908 that was reverted in the 2D version as part
of #21653. This ensures that the Vector returned is always perpendicular
to the surface collided with; and not the floor_normal Vector passed to
the function when on a floor.
- Include an update of the floor velocity before multiplying by the time
delta, which was added to the 2D version as part of commit 13a8014.
In the 2D version:
- Use the Vector2.slide() function instead of Vector2.tangent() to adjust
the amount of motion the stop_on_slope undoes to ensure that it is in the
right direction. This is a implementation of the 3D approach from #30588.
- Combine the !found_collision and motion == Vector2() checks for break.
- Other minor formating changes to make the functions look identical.
Also renamed some variables to align with their use.
Polygon2D:
The property wasn't used anymore after switching from canvas_item_add_polygon() to canvas_item_add_triangle_array() for drawing.
Line2D:
Added the same property as for Polygon2D & fixed smooth line drawing to use indices correctly.
Fixes#26823
Particles were processed only on the next frame after the emission started, causing a one frame delay in rendering. Now the first process cycle is started during the same frame, which makes them consistent with Particles & Particles2D.
Fixes#32890
Now using joint_disable_collisions_between_bodies() to reset the exception, because body_remove_collision_exception() was doing only a part of the work.
Fixes#32733
When playing an animation in reverse, the animation initially starts on frame 0. If it loops, it'll play normally by going to the last frame of the animation, but if it does not... it prematurely stops, since it is already on the last frame (for reversed animation) by starting on frame 0.
OpenGL uses the diamond exit rule to rasterize lines. If we don't shift
the points down and to the right by 0.5, the line can sometimes miss a
pixel when it shouldn't. The final fragment of a line isn't drawn. By
drawing the lines clockwise, we can avoid a missing pixel in the rectangle.
See section 3.4.1 in the OpenGL 1.5 specification.
Fixes#32279
Modified Sprite to use "changed" signal instead of _changed_callback to make it work when tool is disabled (change receptors are editor only).
Fixes#32349
The CanvasItem property setters `set_modulate`, `set_self_modulate`
and `set_light_mask` have some side effects that don't need to be run
if the value hasn't changed.
This closes#31777.
When moving KinematicBody2D from one scene to another and not freeing
the old scene, the first call to move_and_slide() in the new scene will
generate an error because KinematicBody2D keeps internaly a
RID on_floor_body of a body resource in the old scene which no more has
a space assigned.
To fix this, on_floor_body is set to empty RID in response to
NOTIFICATION_ENTER_TREE notification of KinematicBody2D and
KinematicBody. Also all other data related to move_and_slide() is reset:
floor, ceiling, wall flags, colliders vector, floor_velocity.
This fixes#31416.
- Add new handle icons for path/polygon editors
- Add smooth path point icons and curve tangent icons
- Use a gray color for tangent lines in the Path2D and Path editors
- Use antialiasing for Path2D lines
This was a regression in 3.1 and later from the new inspector, where
PROPERTY_HINT_SPRITE_FRAME was not fully re-implemented. It's meant to
be a normal PROPERTY_HINT_RANGE which also automatically increments its
value when keyed in the animation player.
To avoid code duplication, I made the frames properties use the actual
PROPERTY_HINT_RANGE and introduced a PROPERTY_USAGE_KEYING_INCREMENTS
usage flag instead.
- Make RayCast2D gray when it's disabled
- Make the one-way collision arrow use the inverted shape debugging
color (will result in an orange color by default)
- This makes it easier to distinguish it from RayCast2D arrows
- Make lines slightly thinner
- Make the RayCast2D arrow tip larger
- Use anti-aliasing for the RayCast2D and one-way collision lines
- Refer to properties explicitly when possible
- When multiple warnings are returned, always separate them by one
blank line to make them easier to distinguish
- Improve grammar and formatting
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
This commit fix#22989#15249#28206. Main problem is that tilemap displace textures in different tile origins in a strange way and doesn´t respect coincidence between texture and shapes in not uniform tiles. This issue is present in godot 3.0 and godot 3.1. To maintain compatibility are added a compatibility mode and a center texture option. Other related issues and pull request: #28896#29487#29519#29961. Idications of #30204 are added
Those signals receive either a PhysicsBody2D or a TileMap object,
and what the emitting method checks internally is only that the
object is a Node. In theory any Node could go through these signals
if they talk directly to the PhysicsServer2D.
Also updated docs.
Fixes#27076.
Might need further (compat breaking) improvement as this API is a
bit confusing, cf. #24739.
Warnings raised by Emscripten 1.38.0 and MinGW64 5.0.4 / GCC 8.3.0.
JS can now build with `werror=yes warnings=extra`.
MinGW64 still has a few warnings to resolve with `warnings=extra`,
and only one with `warnings=all`.
Part of #29033 and #29801.
The original shader code uses a phase (ratio from 0 to 1 for the particle
lifetime) for the randomness ratio computations, and this code was ported
over but converted to time computations.
The seeding/cycle logic was thus invalid, so we're going back to phase
for these computations, thus fixing the previous non-working time/emission
randomness property.
Part of #29692. Follow-up to #26859.
The tangential acceleration for both CPUParticles2D and CPUParticles had been
badly converted from their GPU counterpart (ParticlesMaterial).
This fixes it and ensures that both GPU and CPU particles behave the same with
regard to tangential acceleration.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
Adds the ability to directly add disabled shapes to a collision object. Before this commit a shape has always been assumed to be enabled and had to be disabled in an extra step.
Made AudioFrame and Vector2 equivalent for casting.
Added ability to obtain the playback object from stream players.
Added ability to obtain effect instance from audio server.
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
Adds `FALLTHROUGH` macro to specify when a fallthrough is intentional.
Can be replaced by `[[fallthrough]]` if/when we switch to C++17.
The warning is now enabled by default for GCC on `extra` warnings level
(part of GCC's `-Wextra`). It's not enabled in Clang's `-Wextra` yet,
but we could enable it manually once we switch to C++11. There's no
equivalent feature in MSVC for now.
Fixes#26135.
lawnjelly
kleonc
Eoin O'Neill
Pedro J. Estébanez
Ellen Poe
Rémi Verschelde
Yuri Roubinsky
Marcel Admiraal
Rémi Verschelde
PouleyKetchoupp
Rafał Mikrut
Dominik 'dreamsComeTrue' Jasiński
greenfox
Eric Tuvesson
Gilles Roudière
Duroxxigar
Haoyu Qiu
Jonathan Vice
booer
ArrowInAKnee
Andrii Doroshenko (Xrayez)
Ranoller
Tomasz Chabora
Mateo Kuruk Miccino
Juan Linietsky
Thomas Riedmair
MickeMakaron
Waridley
Eevee
WARIO-MDMA
bitstopper
Andrea Catania
Александр Растриженков
Hugo Locurcio
Tyler Greenwood
Rafał Mikrut
Mikolaj Kaczmarek
AJ Weeks
Muller-Castro
Emmanuel Barroga
Aaron Franke
Paul Trojahn
Soumya Lahiri
bob
clayjohn
RaphaelHunter
luz.paz
Bhupendra Aole
Michael Alexsander Silva Dias
Milan Davidovic
IAmActuallyCthulhu
Bojidar Marinov
David Sichma
Ibrahn Sahir
LikeLakers2
Simon Puchert
Furkan Türkal
Tristan Grespinet
JohnJLight
SamSindt
Colin Redman
Samuele Zolfanelli
ShyRed
Hein-Pieter van Braam
CatThingy
Kanabenki
Ignacio Etcheverry