The previous value (0) was a special case in the fog shader.
It made the shader use the Camera's `far` value as the fog depth end
value, which led to an inconsistency in the fog rendering between
the editor and a running project. This is because the editor camera
uses a `far` property of 500 by default, whereas the Camera node's
`far` property is set to 100 by default.
The new fixed value is equal to the default `far` property in Camera,
which leads to a consistent appearance between the editor and a running
project.
This closes#31686.
The custom color introduced in be8d569744
had the same name as the "folder" icon, which could cause conflicts
in the generated documentation.
The new name is also more self-explanatory.
This makes them easier to distinguish from files for quick
visual grepping.
This can also be used in projects by setting the FileDialog "folder"
color. The default value (`Color(1, 1, 1)`) has no visual impact,
for compatibility with existing projects.
The last remaining ERR_EXPLAIN call is in FreeType code and makes sense as is
(conditionally defines the error message).
There are a few ERR_EXPLAINC calls for C-strings where String is not included
which can stay as is to avoid adding additional _MSGC macros just for that.
Part of #31244.
This makes height fog appear at the bottom of the scene
(instead of the top), which is generally the expected result.
This also tweaks the fog height setting hint to be more flexible.
This closes#30709.
Closes#30994
When modifying the properties of a tileset in the editor, some properties only apply to the first tile (such as the shape offset).
This change resolves that issue by traversing the changes to all of the shapes in the tileset instead of the first one.
For clarity, assign-to-release idiom for PoolVector::Read/Write
replaced with a function call.
Existing uses replaced (or removed if already handled by scope)
Previously there was some transparency hard coded into TextEdit when in read only mode.
This change adds a custom color for adjusting the font in read only mode.
It also applies when syntax highlighting is on.
By default the LineEdit's text when editable is unchecked had some transparency hardcoded.
This change adds a custom color to LineEdit for adjusting the font when editable is off.
Addresses issue 29814
Partial revert of 02319dceb2,
previous code handled this cases without errors and the TileSet and
TileSetEditorPlugin are written with the expectation that those will
not error out.
This is a bit wonky and these classes should likely be refactored,
but until then it's best to keep things as they were.
Fixes#29962.
The setters are called when the property is first initialized, and before
that its default min and max are 0.0 and 1.0 respectively.
If you configured min_value to 1.0 and max_value to e.g. 3.0, since the
min_value setter can be called before that of max_value (which thus still
defaults to 1.0), the min will be set to 0.99.
Same conflict could happen with a configured max_value of 0 if its setter
is called before that of a valid, negative min value.
ResourceFormatLoader and ResourceFormatSaver are meant to be overridden
to add support for different formats in ResourceLoader and ResourceSaver.
Those should be exposed as they can be overridden in plugins.
On the other hand, all predefined subclasses of those two base classes
are only meant to register support for new file and resource types, but
should not and cannot be used directly from script, so they should not
be exposed.
Also unexposed ResourceImporterOGGVorbis (and thus its base class
ResourceImporter) which are editor-only.
This is a new singleton where camera sources such as webcams or cameras on a mobile phone can register themselves with the Server.
Other parts of Godot can interact with this to obtain images from the camera as textures.
This work includes additions to the Visual Server to use this functionality to present the camera image in the background. This is specifically targetted at AR applications.
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
This decreases the number of samples significantly, leading to a
notable performance increase with only a very slight loss in
visual quality.
This also tweaks the default SSAO settings to use 3×3 blurring,
which makes noise patterns much less visible.
If a non-imported texture resource file (e.g. DDS) gets updated the editor
doesn't reload it. The cause of the problem is two-fold:
First, the code of ImageTexture assumes that textures are always imported
from an image, but that's not the case for e.g. DDS. This change thus adds
code to issue a resource reload in case an image reload is not possible
(which is the case for non-imported texture resources).
Second, the code is filled with bogus calls to Image::get_image_data_size()
to determine the mipmap offset when that should be done using
Image::get_image_mipmap_offset(). Previous code literally passed the integer
mip level value to Image::get_image_data_size() where that actually expects
a boolean. Thus this part of the change might actually solve some other
issues as well.
To be pedantic, the texture_get_data() funciton of the rasterizer drivers is
still quite a mess, as it only ever returns the whole mipchain when
GLES_OVER_GL is set (practically only on desktop builds) but this change does
not attempt to resolve that.
If bake interval is a multiple of the curve length, the curve would return NaN for some offset values (when `frac == 0.0`, it matches the start and end of the curve segment so `fmod == 0.0`, `frac` becomes NaN)
```
# Godot 3.1.1
var c = Curve3D.new()
c.add_point(Vector3())
c.add_point(Vector3(0.5,0,0))
c.add_point(Vector3(1,0,0))
c.bake_interval = 0.5
c.interpolate_baked(0.5) == Vector3(NAN, NAN, NAN)
```
It seems to stay compatible with formatting done by clang-format 6.0 and 7.0,
so contributors can keep using those versions for now (they will not undo those
changes).
Was getting this error when using a saturate node. This change fixes it.
```
:39 - Invalid arguments for built-in function: max(float,int)
drivers\gles3\rasterizer_storage_gles3.cpp:2150 - Condition ' err != OK ' is true.
```
To follow the glTF 2.0 specification in all cases (including outside
of imported glTF scenes), the blue channel is now used for metallic
and the green channel is now used for roughness.
-Changed Animation to have a special signal when tracks are changed, to avoid unnecesary track cache rebuilds in AnimationPlayer
-Added missing emit_changed whe modifying keys to Animation
-Changed AnimationPlayer to use the new refcounted connections instead of the previous hacky way to keep references
-Changed AnimationEditor to update the current track when keys are edited
-Fixed bug where undo/redo did not work with AnimationKeyEdit (was not being updated)
-Made sure UndoRedo does not mind deleted objects in undo/redo history, this would corrupt the history or clear it without need.
- From now materials assigned to the MeshInstance (not the Mesh) get exported
into the MeshLibrary when such materials exist. This enables workflows where
the MeshLibrary is exported from an imported scene (e.g. GLTF) where the
materials assigned to the Mesh (not the MeshInstance) get overwritten on
re-import, thus can't use editor set materials in the exported MeshLibrary
unless they are assigned to the MeshInstance whose materials get saved with
the inherited scene thus persist across re-imports.
- When appending to an existing MeshLibrary only generate previews for newly
added or modified meshes.
- During preview generation transform camera and lights instead of the mesh
and use the source MeshInstance's transform for the mesh to avoid weird
previews being generated for meshes with a position dependent material
(e.g. when using triplanar mapping).
- Adjust the camera angle and light directions used in mesh preview generation
for better results.
This allows most demos to run without any ubsan or asan errors. There
are still some things in thirdpart/ and some things in AudioServer that
needs a look but this fixes a lot of issues. This should help debug less
obvious issues, hopefully.
This fixes#25217 and fixes#25218
Regression from cd0b82fd56, it must be hidden from docs
(PROPERTY_USAGE_INTERNAL) but not from the editor.
Supersedes and fixes#24880.
Co-authored-by: QbieShay <cislaghi.ilaria@gmail.com>
Fix#24456
The character->rect.size is properly update at DynamicFontAtSize::_bitmap_to_character
so no need to multiply scale again.
It was changed with 5cd12f6649
Fixes the following warnings in `p=server target=release_debug` builds
on Travis CI:
```
./core/os/memory.h: In function 'MainLoop* TestOAHashMap::test()':
./core/os/memory.h:108:111: warning: 'dummy' may be used uninitialized in this function [-Wmaybe-uninitialized]
#define memnew_placement(m_placement, m_class) _post_initialize(new (m_placement, sizeof(m_class), "") m_class)
^
main/tests/test_oa_hash_map.cpp:98:7: note: 'dummy' was declared here
int dummy;
^
scene/resources/bit_mask.cpp:447:3: warning: 'next_i' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/resources/bit_mask.cpp:448:4: warning: 'next_j' may be used uninitialized in this function [-Wmaybe-uninitialized]
```
- Editor font anti-aliasing can now be disabled in the Editor Settings.
- DynamicFonts used in projects can now have their anti-aliasing
disabled in their DynamicFontData child. Changes will be visible
upon reloading the scene in the editor.
Remove animation loop from ParticlesMaterial and move it to
SpatialMaterial for 3D particles and Particles2D for the 2D case.
Added animation to CPUParticles2D as well as the "Convert to
CPUParticles2D" to the PAarticles2D menu.
Means the list is destroyed before the OS object, allowing it the
opportunity to print an error if there are still dynamic font objects
hanging around.
Disabled signed/unsigned warnings like for GCC/Clang
(warning C4018: '>=': signed/unsigned mismatch).
Fixes the following MSVC 2017 warnings:
```
core\image.cpp(999): warning C4804: '>': unsafe use of type 'bool' in operation
core\io\compression.cpp(178): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
editor\doc\doc_dump.cpp(226): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
scene/resources/material.h(289): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
scene/resources/material.h(298): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
editor\editor_themes.cpp(379): warning C4805: '==': unsafe mix of type 'int' and type 'bool' in operation
```
Namely:
[-Wunneeded-internal-declaration]
[-Wunused-comparison]
[-Wunused-const-variable]
[-Wunused-function]
[-Wunused-private-fields]
Fixes the following Clang 7 warnings:
```
editor/plugins/script_editor_plugin.cpp:1417:20: warning: function '_find_node_with_script' is not needed and will not be emitted [-Wunneeded-internal-declaration]
editor/scene_tree_dock.cpp:1859:14: warning: function '_find_last_visible' is not needed and will not be emitted [-Wunneeded-internal-declaration]
modules/gdscript/gdscript_parser.cpp:7838:19: warning: equality comparison result unused [-Wunused-comparison]
scene/resources/mesh.cpp:549:35: warning: unused variable '_array_types' [-Wunused-const-variable]
scene/resources/mesh.cpp:563:18: warning: unused variable '_format_translate' [-Wunused-const-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:54:28: warning: unused function 'store_transform2d' [-Wunused-function]
core/io/file_access_network.h:50:6: warning: private field 'ml' is not used [-Wunused-private-field]
core/io/file_access_zip.h:93:14: warning: private field 'archive' is not used [-Wunused-private-field]
core/io/resource_format_binary.h:122:6: warning: private field 'bin_meta_idx' is not used [-Wunused-private-field]
core/message_queue.h:47:9: warning: private field 'mutex' is not used [-Wunused-private-field]
main/tests/test_gui.cpp:63:11: warning: private field 'control' is not used [-Wunused-private-field]
modules/gdscript/gdscript_parser.h:558:7: warning: private field 'completion_static' is not used [-Wunused-private-field]
platform/x11/os_x11.h:148:11: warning: private field 'ip_unix' is not used [-Wunused-private-field]
platform/x11/os_x11.h:180:7: warning: private field 'net_wm_icon' is not used [-Wunused-private-field]
platform/x11/os_x11.h:189:6: warning: private field 'audio_driver_index' is not used [-Wunused-private-field]
platform/x11/os_x11.h:190:15: warning: private field 'capture_idle' is not used [-Wunused-private-field]
servers/physics/body_pair_sw.h:79:6: warning: private field 'cc' is not used [-Wunused-private-field]
servers/visual/visual_server_raster.h:62:7: warning: private field 'draw_extra_frame' is not used [-Wunused-private-field]
```
Fixes the following Clang 7 warnings:
```
core/object.cpp:44:1: warning: '_ObjectDebugLock' defined as a struct here but previously declared as a class [-Wmismatched-tags]
core/variant_call.cpp:43:1: warning: '_VariantCall' defined as a struct here but previously declared as a class [-Wmismatched-tags]
drivers/gles3/rasterizer_storage_gles3.h:765:2: warning: 'MultiMesh' defined as a struct here but previously declared as a class [-Wmismatched-tags]
editor/editor_node.h:794:1: warning: 'EditorProgress' defined as a struct here but previously declared as a class [-Wmismatched-tags]
modules/bullet/rigid_body_bullet.h:230:17: warning: class 'KinematicUtilities' was previously declared as a struct [-Wmismatched-tags]
modules/bullet/space_bullet.h:60:1: warning: class 'btSoftBodyWorldInfo' was previously declared as a struct [-Wmismatched-tags]
scene/resources/world_2d.cpp:40:1: warning: 'SpatialIndexer2D' defined as a struct here but previously declared as a class [-Wmismatched-tags]
scene/resources/world.cpp:39:1: warning: 'SpatialIndexer' defined as a struct here but previously declared as a class [-Wmismatched-tags]
servers/audio/reverb_sw.cpp:60:1: warning: 'ReverbParamsSW' defined as a struct here but previously declared as a class [-Wmismatched-tags]
thirdparty/bullet/BulletSoftBody/btSoftBody.h:43:1: warning: 'btSoftBodyWorldInfo' defined as a struct here but previously declared as a class [-Wmismatched-tags]
```
Fix for incorrect types used in MeshDataTool for bones and weights.
If your mesh contains these memory accesses get OOB and might crash
the application
Closes#21713
Fixes the following GCC 5 warnings:
```
core/io/zip_io.h:128:26: warning: 'zlib_filefunc_def zipio_create_io_from_file(FileAccess**)' defined but not used [-Wunused-function]
core/script_debugger_remote.cpp:110:17: warning: 'ObjectID safe_get_instance_id(const Variant&)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:103:12: warning: 'int _socket_create(IP::Type&, int, int)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:45:15: warning: 'size_t _set_sockaddr(sockaddr_storage*, const IP_Address&, int, IP::Type)' defined but not used [-Wunused-function]
drivers/unix/socket_helpers.h:76:15: warning: 'size_t _set_listen_sockaddr(sockaddr_storage*, int, IP::Type, IP_Address)' defined but not used [-Wunused-function]
editor/editor_fonts.cpp:40:24: warning: 'Ref<BitmapFont> make_font(int, int, int, int, const int*, const Ref<Texture>&)' defined but not used [-Wunused-function]
editor/editor_themes.cpp:85:26: warning: 'Ref<StyleBoxFlat> change_border_color(Ref<StyleBoxFlat>, Color)' defined but not used [-Wunused-function]
editor/import/editor_import_collada.cpp:493:13: warning: 'void _generate_normals(const PoolVector<int>&, const PoolVector<Vector3>&, PoolVector<Vector3>&)' defined but not used [-Wunused-function]
editor/import/editor_import_collada.cpp:524:13: warning: 'void _generate_tangents_and_binormals(const PoolVector<int>&, const PoolVector<Vector3>&, const PoolVector<Vector3>&, const PoolVector<Vector3>&, PoolVector<float>&)' defined but not used [-Wunused-function]
editor/pvrtc_compress.cpp:118:13: warning: 'void _compress_etc(Image*)' defined but not used [-Wunused-function]
modules/etc/image_etc.cpp:89:13: warning: 'void _decompress_etc1(Image*)' defined but not used [-Wunused-function]
modules/etc/image_etc.cpp:93:13: warning: 'void _decompress_etc2(Image*)' defined but not used [-Wunused-function]
modules/gdscript/editor/gdscript_highlighter.cpp:46:13: warning: 'bool _is_whitespace(CharType)' defined but not used [-Wunused-function]
scene/2d/cpu_particles_2d.cpp:510:14: warning: 'float rand_from_seed_m1_p1(uint32_t&)' defined but not used [-Wunused-function]
scene/3d/cpu_particles.cpp:474:14: warning: 'float rand_from_seed_m1_p1(uint32_t&)' defined but not used [-Wunused-function]
scene/resources/default_theme/default_theme.cpp:123:20: warning: 'Ref<Shader> make_shader(const char*, const char*, const char*)' defined but not used [-Wunused-function]
scene/resources/default_theme/default_theme.cpp:130:24: warning: 'Ref<BitmapFont> make_font(int, int, int, int, const int*, const Ref<Texture>&)' defined but not used [-Wunused-function]
```
Had to split `core/io/zip_io.h` into header and .cpp file without 'static' keyword.
Not fixed yet (static definition in header used in some files but not all):
```
modules/websocket/lws_helper.h:111:13: warning: 'void _lws_make_protocols(void*, int (*)(lws*, lws_callback_reasons, void*, void*, size_t), PoolVector<String>, _LWSRef**)' defined but not used [-Wunused-function]
```
Also fixed a couple other warnings missed in previous commits.
Made Debugger's Video Memory tab show correct resource paths.
The Icons are still missing but that is due to the get_icon(type, "EditorIcons") for type = "Texture" being missing. Adding that icon would fix it.
Fixes the following GCC 5 warnings:
```
core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder]
core/object.h:192:15: warning: 'PropertyInfo MethodInfo::return_val' [-Wreorder]
core/object.cpp:278:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder]
core/script_debugger_remote.h:91:6: warning: 'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder]
core/script_debugger_remote.h:92:6: warning: 'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning: when initialized here [-Wreorder]
modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder]
modules/bullet/area_bullet.h:92:39: warning: 'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder]
modules/bullet/area_bullet.cpp:46:1: warning: when initialized here [-Wreorder]
modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder]
modules/bullet/collision_object_bullet.h:117:7: warning: 'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder]
modules/bullet/collision_object_bullet.cpp:67:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:46:33: warning: 'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder]
modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:89:6: warning: 'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:93:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:140:6: warning: 'int GodotAllContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:147:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:166:6: warning: 'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:173:2: warning: when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:191:7: warning: 'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder]
modules/bullet/godot_result_callbacks.h:199:2: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:199:9: warning: 'real_t RigidBodyBullet::mass' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:219:7: warning: 'bool RigidBodyBullet::isTransformChanged' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:208:6: warning: 'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:68:6: warning: 'int SoftBodyBullet::simulation_precision' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:61:14: warning: 'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:95:35: warning: 'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:99:23: warning: 'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning: when initialized here [-Wreorder]
modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder]
modules/gdnative/nativescript/nativescript.h:73:9: warning: 'String NativeScriptDesc::documentation' [-Wreorder]
modules/gdnative/nativescript/nativescript.h:88:9: warning: when initialized here [-Wreorder]
modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder]
modules/gdscript/gdscript.h:294:4: warning: 'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder]
modules/gdscript/gdscript.h:303:2: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder]
scene/3d/physics_body.h:543:7: warning: 'bool PhysicalBone::_internal_static_body' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder]
scene/3d/physics_body.h:539:12: warning: 'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning: when initialized here [-Wreorder]
scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder]
scene/3d/spring_arm.h:43:8: warning: 'float SpringArm::current_spring_length' [-Wreorder]
scene/3d/spring_arm.cpp:37:1: warning: when initialized here [-Wreorder]
scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder]
scene/animation/skeleton_ik.h:152:7: warning: 'bool SkeletonIK::use_magnet' [-Wreorder]
scene/animation/skeleton_ik.cpp:418:1: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder]
scene/resources/tile_set.h:83:7: warning: 'int TileSet::AutotileData::spacing' [-Wreorder]
scene/resources/tile_set.h:92:12: warning: when initialized here [-Wreorder]
scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder]
scene/resources/tile_set.h:114:9: warning: 'Color TileSet::TileData::modulate' [-Wreorder]
scene/resources/tile_set.h:120:12: warning: when initialized here [-Wreorder]
servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder]
servers/physics/body_sw.h:57:11: warning: 'uint16_t BodySW::locked_axis' [-Wreorder]
servers/physics/body_sw.cpp:756:1: warning: when initialized here [-Wreorder]
```
Nothing really relevant for us, but it's not a bad consistency
improvement anyway so worth taking.
Fixes GCC 5 warnings of the form:
core/io/http_client.cpp:288:9: warning: enumeration value 'STATUS_SSL_HANDSHAKE_ERROR' not handled in switch [-Wswitch]
core/io/marshalls.cpp:806:9: warning: enumeration value 'AABB' not handled in switch [-Wswitch]
Those can be trivial cases where adding a default fallback is the solution,
or more complex issues/hidden bugs where missed values are actually meant
to be handled.
Fixes the following GCC 5 warnings:
```
core/os/file_access.cpp:49:19: warning: the address of 'FileAccess::create_func' will always evaluate as 'true' [-Waddress]
servers/audio_server.cpp:192:70: warning: comparison with string literal results in unspecified behaviour [-Waddress]
drivers/gles2/rasterizer_storage_gles2.cpp:4095:90: warning: NULL used in arithmetic [-Wpointer-arith]
modules/gdnative/register_types.cpp:237:3: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
platform/android/export/export.cpp:207:1: warning: deprecated conversion from string constant to 'char*' [-Wwrite-strings]
modules/gdscript/gdscript.h:150:67: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:119:56: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:123:56: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:127:50: warning: returning reference to temporary [-Wreturn-local-addr]
servers/physics_2d/collision_object_2d_sw.h:131:52: warning: returning reference to temporary [-Wreturn-local-addr]
editor/plugins/skeleton_editor_plugin.cpp:34:36: warning: extra tokens at end of #include directive
modules/bullet/bullet_types_converter.cpp:31:9: warning: #pragma once in main file
editor/import/editor_scene_importer_gltf.cpp:1996:51: warning: name lookup of 'i' changed
modules/visual_script/visual_script_property_selector.cpp:402:45: warning: name lookup of 'E' changed
scene/gui/tree.cpp:1268:25: warning: name lookup of 'i' changed
scene/resources/visual_shader.cpp:808:32: warning: name lookup of 'i' changed
```
Fixes the following GCC 5 warnings:
```
drivers/gles2/rasterizer_canvas_gles2.cpp:814:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2270:11: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:2673:22: warning: variable 'e' set but not used [-Wunused-but-set-variable]
drivers/gles2/rasterizer_scene_gles2.cpp:715:7: warning: variable 'no_cull' set but not used [-Wunused-but-set-variable]
drivers/gles2/shader_gles2.cpp:693:14: warning: variable 'cc' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_canvas_gles3.cpp:1226:8: warning: variable 'rt_size' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:3039:10: warning: variable 'contrib' set but not used [-Wunused-but-set-variable]
drivers/gles3/rasterizer_scene_gles3.cpp:4504:32: warning: variable 'vp_height' set but not used [-Wunused-but-set-variable]
editor/editor_inspector.cpp:272:9: warning: variable 'guide_color' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:1067:14: warning: variable 'alpha3' set but not used [-Wunused-but-set-variable]
editor/editor_themes.cpp:263:8: warning: variable 'script_bg_color' set but not used [-Wunused-but-set-variable]
editor/plugins/collision_shape_2d_editor_plugin.cpp:326:11: warning: variable 'cpoint' set but not used [-Wunused-but-set-variable]
editor/plugins/mesh_editor_plugin.cpp:72:9: warning: variable 'size' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:471:12: warning: variable 'mpos' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:89:8: warning: variable 'basetype_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:90:8: warning: variable 'type_color' set but not used [-Wunused-but-set-variable]
editor/plugins/shader_editor_plugin.cpp:92:8: warning: variable 'string_color' set but not used [-Wunused-but-set-variable]
modules/visual_script/visual_script_editor.cpp:2521:7: warning: variable 'seq_connect' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:580:12: warning: variable 'styles_count' set but not used [-Wunused-but-set-variable]
platform/android/export/export.cpp:584:12: warning: variable 'styles_offset' set but not used [-Wunused-but-set-variable]
platform/osx/export/export.cpp:464:9: warning: variable 'zerr' set but not used [-Wunused-but-set-variable]
scene/2d/tile_map.cpp:260:10: warning: variable 'tcenter' set but not used [-Wunused-but-set-variable]
scene/3d/light.cpp:166:7: warning: variable 'editor_ok' set but not used [-Wunused-but-set-variable]
scene/3d/navigation.cpp:566:11: warning: variable 'closest_navmesh' set but not used [-Wunused-but-set-variable]
scene/gui/rich_text_label.cpp:869:8: warning: variable 'size' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:705:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:706:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:726:14: warning: variable 'xform' set but not used [-Wunused-but-set-variable]
scene/main/viewport.cpp:727:8: warning: variable 'ss' set but not used [-Wunused-but-set-variable]
scene/resources/material.cpp:430:7: warning: variable 'using_world' set but not used [-Wunused-but-set-variable]
servers/visual/shader_language.cpp:2026:7: warning: variable 'all_const' set but not used [-Wunused-but-set-variable]
servers/visual/visual_server_scene.cpp:1383:28: warning: variable 'z_max_cam' set but not used [-Wunused-but-set-variable]
```
Also fixes two [-Wunused-value] warnings:
```
scene/gui/text_edit.cpp:4405:20: warning: statement has no effect [-Wunused-value]
servers/visual/visual_server_scene.cpp:905:48: warning: value computed is not used [-Wunused-value]
```
Some of those are bugs and need further work, they are identified with
`// FIXME` comments.
Also turn off -Wsign-compare warnings in the future, we do not consider them important.
Fixes the following GCC 5 warnings:
```
core/node_path.cpp:279:24: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:169:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/oa_hash_map.h:314:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/shader_gles2.cpp:985:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles3/rasterizer_storage_gles3.cpp:1075:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/pulseaudio/audio_driver_pulseaudio.cpp:343:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_plugin.cpp:525:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/editor_properties_array_dict.cpp:747:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:2078:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/spatial_editor_plugin.cpp:4096:27: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
editor/plugins/sprite_editor_plugin.cpp💯20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:122:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:134:77: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/cvtt/image_compress_cvtt.cpp:339:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/etc/image_etc.cpp:222:34: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:242:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/gdnative/register_types.cpp:258:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:200:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:222:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
modules/opensimplex/simplex_noise.cpp:246:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1085:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1489:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/android/export/export.cpp:1623:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:206:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:356:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:406:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
platform/iphone/export/export.cpp:493:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/audio_stream_player_3d.cpp:420:23: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:565:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/audio_stream_sample.cpp:571:22: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_rb_resampler.cpp:156:36: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
The following warnings were not fixed, as they implied casting for no gain:
```
core/io/packet_peer.cpp:228:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
core/io/resource_format_binary.cpp:109:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/gles2/rasterizer_scene_gles2.cpp:144:57: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
drivers/unix/file_access_unix.cpp:249:46: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:889:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1020:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:1154:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/3d/voxel_light_baker.cpp:2255:38: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
scene/resources/bit_mask.cpp:336:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:141:49: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:150:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio/audio_stream.cpp:154:19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:86:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
servers/audio_server.cpp:89:17: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
```
SimplexNoise can be used to generate parameterized fractal noise based on Open Simplex.
NoiseTexture uses SimplexNoise to generate noise textures for using in
shaders/visual effects.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
It's shared by both 2D and 3D particles (+ CPU ones), so it makes sense
to have as a common resource. It also allowed to disable compilation of
Particles (3D) when using 'disable_3d'.
Also cleaned up includes in SpatialEditorGizmos and some other places,
as well as dropped dead code in material_editor_plugin.cpp.
Since this class is editor-oriented, this set_get is necessary to full implement tool, importer, etc... for tiles. (No other way to know a real tile size in autotile mode)
This is to prevent crashes for code like:
...
void Material::set_next_pass(const Ref<Material> &p_pass) {
ERR_FAIL_COND(p_pass == this);
...
that's been fixed in 031f763d4f
The margin value is exposed into the UI for shape ressource.
This value can be modified through set_margin and get from get_margin
or by using the property margin. Each time the margin is modified
the associated collision shape is recreated and the margin value is
used in ShapeBullet::prepare.
- Add pressed state to clear button
- Enable clear button on all inputs with search icon
- Remove duplicate clear buttons
- Fix rendering of icon for center and right alignments
- Add clear button to more search fields
- Add clear icon to default theme
- Add method to control enabled state of clear button
- Add property to enable clear button from inspector
Roughness is now set to 1 by default and albedo is now white,
even on meshes that do not have any materials defined.
This means there is no longer a visual difference between a
mesh with no materials defined and a mesh with a default
SpatialMaterial defined.
Implements an Audio bus effect that outputs the audio from the bus into a wav file
Now channels audio recording into an AudioStreamSample instead of saving to wav
This commit makes operator[] on Vector const and adds a write proxy to it. From
now on writes to Vectors need to happen through the .write proxy. So for
instance:
Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;
Failing to use the .write proxy will cause a compilation error.
In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.
_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
* Prototype faster function call ux.
* Work on general search ux.
* Able to create nodes from search.
* Show class for variables but not methods.
* Get actions search working.
* Descriptions now show for both methods and properties.
* Enable zooming on mouse wheel up and down.
* Make the drag trigger on right mouse button.
* Search now shows for action visual script nodes.
* Able to search visual node names.
* Search works better.
* Change zooming scale to hide artifacts better.
* Remove zoom changes
* Select from base should check properties too like the other functions.
* Seq_connect flag is needed to set sequence lines correctly.
* Remove comment
* Code cleanup with function names and arguments.
* Use brief description for search descriptions.
* Clean and fix bug with input nodes connecting with sequence lines.
* Add a warning and fix some edge conditions with sequence into data lines and vice versa.
* Don't search functions when pulling from a sequence node.
* Don't show actions when pulling from a data line.
* Set set and get properties.
* Convert visual script operators to the correct type
* Create a function preset finds only functions.
* Singletons can now find functions.
* Add shift-a for generic search.
* Add brief descriptions for Visual Script nodes.
* Search boxes can now filter names.
* Add bigger hit zones to node connect.
* For the drop zones, make all the rect2 areas the same size.
* Function names in visual script node should be lower case so that search works better.
* Use the convention of capitalize() for set, set, visual script nodes and methods.
* Make search more general. Ignore "_" and make case-insensitive. Also made the search window smaller and remove extra info from search
* Make type_cast use the connecting node's type and remove use of found variable.
* Fix case where you call an instance's call function where it becomes an invalid call.
* Make get_visual_node_names use a set of filters, move action creations and fix bug with sequence node connections.
* Make the window bigger.
* Make connect_data and connect_seq more robust.
* Add icons to search items.
* Add vs constructors in shift-a menu.
* Operators, builtins and constructors show type name. Fix several problems with port connections.
* In shift-a mode search everything.
* Code cleanup
* Work on autocompleting the type.
* Use type guess in action creation.
* Check if type hint string exists in object variables when generating the visual script search.
* Add the hint to SceneTree.
* Add original type detection.
* Make type casting great again. This puts the type casted base type as the data output type string hint.
* Pass the type in a VisualScriptFunctionCall too.
* Set the base type correctly in VisualScriptFunctionGet and VisualScriptFunctionSet using hint string.
* Make sure the instance is passed in VisualScriptPropertySet.
* Restore search on the node's type.
* Remove dependencies from graph_edit.
* Remove dependencies from property_selector and name the class visual_script_property_selector.
* Extract hot zones into a function.
* Move hot_zones constants into default theme.
* Bigger capture zones.
* Clean messy port_grab_distance variables.
* Remove RMB functionality.
* Remove memory leak on showing visual script descriptions.
* Read the port_grab_distance constants on enter tree and theme changed.
Some classes use Font::get_char_size directly and not only for
autowrapping. RichTextLabel is one such example. So this commit
reverts aa8561d (PR #17504) and instead ceils character width within
Label. This makes sure Label autowraps correctly while not affecting
other Font clients.
Fixes#18835.
Fixes#15787.
The issue occurred when two (or more) separate DynamicFont instances
used the same DynamicFontAtSize instance due to having equal
properties. The first instance updated its data_at_size and emitted
"changed" signal, but the second did not because it considered the
data_at_size to be up to date, even though it has just been updated.
- Implement outlines based on FreeType Stroker API. This allows
artifact-free results, similar to what you will see in Web or any text
editing tools. Outline is a part of DynamicFont rather than Label,
because outlines have to be baked into the font's atlas. Font has a
default outline_color and a Label can specify font_outline_modulator
that will be multiplied with the Font's color to get the final result.
- draw_char now has to be called twice to fully render a text - first
with p_outline == true for each character and then with
p_outline == false for each character.
- Number of draw-calls is reduced from 5 to 2 per outlined character.
- Overall cleanup of DynamicFont code, extracted duplicated code pieces
into separate methods.
- The change is backward-compatible - Labels still have outline
properties that work exactly as they worked before.
Closes#16279.
-Missing Icons
-Missing freezing option (for baking light and faster load)
-Missing a way to export from Godot (GLTF2?)
-Probably buggy (may freeze editor, can be worked around easily, but let me know if this happens so it's easier to catch bugs)
Happy testing!
Chaosus89
Bojidar Marinov
Rémi Verschelde
byfron
Tomasz Chabora
Hugo Locurcio
fjordyo
Saracen
Paul Trojahn
IAmActuallyCthulhu
qarmin
merumelu
Emmanuel Barroga
clayjohn
unknown
Simon Puchert
Ibrahn Sahir
Furkan Türkal
hbina085
Gwyneth Lowe
JohnJLight
BastiaanOlij
Michael Alexsander Silva Dias
JFonS
Ignacio Etcheverry
Max Hilbrunner
Daniel Rakos
Jared
Maxime Leroy
miwanczuk
K. S. Ernest (iFire) Lee
Mariano Suligoy
Aaron Franke
Rikhardur Bjarni Einarsson
Hein-Pieter van Braam
Juan Linietsky
yakun.zhang
Max
Magnus Specht
PouleyKetchoupp
Timo
Hendrikto
Andrii Doroshenko (Xrayez)
Angeloss
Juan Linietsky
Ilaria Cislaghi
marxin
Windy Darian
KaadmY
Fabian
groud
Marcin Zawiejski
Stanislav
volzhs
Timo Schwarzer
Guilherme Felipe
harrisyu
Shinryuuji
Mateus Felipe C. C. Pinto
Marc Gilleron
Guillaume Laforte
Dominique LaSalle
DualMatrix
Kanabenki
Toshiwo
MrCdK
M. Huri
Dualtagh Murray
clayjohn
Andrea Catania
karroffel
Akeru
Sergey Lapin
Alexandre LittleWhite Laurent
elasota
luz.paz
Martin Capitanio
Ranoller
alex-poe
Black Cat!
Poommetee Ketson
pesets
Tristan Porteries
Łukasz Rutkowski
Pedro J. Estébanez
Gustav Lund
Wilson E. Alvarez
Paulb23
George Marques
Marcelo Fernandez
Alex Roman
Luke Miller
muiroc
Pedro J. Estébanez
Mintormo
danilo2205
isaacremnant
Pieter-Jan Briers
Ruslan Mustakov
Zumo
sersoong
Markus Törnqvist