This comment is useful to determine the origin of ShaderMaterials
converted from built-in material types (such as CanvasItemMaterial
or SpatialMaterial).
The Godot version is also included in case the shader needs to be
regenerated with a newer engine version.
This is only available on the GLES3 backend.
This can be useful for advanced shaders, but it should generally
not be enabled otherwise as full precision has a performance cost.
For general-purpose rendering, the built-in debanding filter should
be used to reduce banding instead.
Previously, you would be able to double click a word, followed by
single-clicking another word on the same line, which would select the
entire line. Now, it will only select the whole line if the mouse
position has remained the same after the double click. This mimicks the
behavior in most third party text editors.
Fixes#51312.
(cherry picked from commit 408401a642)
This is incorrect and not fully implemented, and results in inconsistency in the UI and in the hovering variable.
(cherry-picked from commit edcbe88389)
This backports the high quality glow mode from the `master` branch.
Previously, during downsample, every second row was ignored.
Now, when high-quality is used, we sample two rows at once to ensure
that no pixel is missed. It is slower, but looks much better and has
a much high stability while moving.
High quality also takes an additional horizontal sample the width of the
horizontal blur matches the height of the vertical blur.
Same thing that was already done in 2D, applies moving platform motion
by using a call to move_and_collide that excludes the platform itself,
instead of making it part of the body motion.
Helps with handling walls and slopes correctly when the character walks
on the moving platform.
Also made some minor adjustments to the 2D version and documentation.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
When synchronizing KinematicBody motion with moving the platform using
direct body state, only the linear velocity was taken into account.
This change exposes velocity at local point in direct body state and
uses it in move_and_slide to get the proper velocity that includes
rotations.
Fixed a bug in the complex PVS generation which was causing recursive loop.
Move some of the settings out of RoomManager into Project Settings.
Allow PVS generation method to be selected from Project Settings, and control PVS logging.
The checking for link room IDs was checking for less than size(), but was not correctly checking for -1,
and therefore reading outside the array range. This PR fixes this.
Portal autolinking was previously agnostic to room priorities, which meant that portals would link to the first room they found (often outside rooms). This PR fixes this by making the autolinking priority aware, and will preferentially link to internal rooms.
Fixes a bug whereby it read from the primary PVS in the gameplay monitor, using the size from the secondary PVS. This would read out of bounds and crash.
Removed debug code to update the gameplay monitor from the preview camera - this is no longer required.
Temporarily revert to the simple PVS generation method, because I've noticed a bug in the complex version, and the simple version is safer while I fix this.
Calling rooms_set_active with TOOLS_ENABLED from a running project resulted in a crash because the Spatial Editor is not available. Wrapped it in an is_editor_hint.
They could cause a segfault when parsing values with ID "Resource"
as apparently we never set a valid `func` for it.
Fixes crash part of #42115.
(cherry picked from commit f3aaa713d9)
In response to user demand, the naming convention for importing levels from blender etc is changed from prefixes `Room_` and `Portal_` to postfixes `-room`, `-roomgroup`, `-portal`.
The use of special prefixes is only actually required during the import phase - the first conversion of rooms, roomgroups, and portals from Spatials and MeshInstances (based on the workflow of importing from blender).
Once converted to the native Godot nodes there is no longer a need for the naming requirements.
This PR removes the requirements except for the import. Manual portal linking after the initial conversion is now done exclusively using the `linked_room` nodepath property of the Portal.
This PR makes the 'convert rooms' button permanently on the toolbar and accessible whichever node is selected, so you can convert rooms without having to select the RoomManager first.
It also adds a togglable item 'view portal culling' to the 'View' menu which is a simple way of setting the RoomManager 'active' setting without the RoomManager being the selected node.
Both of these have keyboard shortcuts, which should make it much faster to reconvert rooms and edit.
In addition there the string in the 'Perspective' Listbox is modified to show [portals active] when portal culling is operational, for visual feedback. This is updated when you change modes, and when the rooms are invalidated.
- Now able to display up to 32 layers in physics (still 20 for render)
- Adjustable grid size to fit available space in dock
- Expansion icon to display more layers vertically
- Layer numbers in cells to help with selection
Implement Octahedral Compression for normal/tangent vectors
*Oct32 for uncompressed vectors
*Oct16 for compressed vectors
Reduces vertex size for each attribute by
*Uncompressed: 12 bytes, vec4<float32> -> vec2<unorm16>
*Compressed: 2 bytes, vec4<unorm8> -> vec2<unorm8>
Binormal sign is encoded in the y coordinate of the encoded tangent
Added conversion functions to go from octahedral mapping to cartesian
for normal and tangent vectors
sprite_3d and soft_body meshes write to their vertex buffer memory
directly and need to convert their normals and tangents to the new oct
format before writing
Created a new mesh flag to specify whether a mesh is using octahedral
compression or not
Updated documentation to discuss new flag/defaults
Created shader flags to specify whether octahedral or cartesian vectors
are being used
Updated importers to use octahedral representation as the default format
for importing meshes
Updated ShaderGLES2 to support 64 bit version codes as we hit the limit
of the 32-bit integer that was previously used as a bitset to store
enabled/disabled flags
If the user changed the portal Z scale in the editor the portal margin display could become incorrectly sized.
This is because the portal margin is measured in world space units, and has to be back calculated into model space using the inverse global transform of the portal node. The model space size of the margin is thus tied to the current scale of the node.
This PR forces updating the gizmo each time the transform is changed. This isn't super efficient, but as this is an editor only feature it should be okay, and it is unlikely to be a performance problem.
Due to a quirk in CSG Shapes, updating is usually deferred to the next frame. This is problematic as we need to read back the geometry on the first frame when converting levels.
This PR adds a function to CSGShape to force immediate updating (if dirty), and calls it during room conversion.
The default autoplace algorithm places instances in the highest priority Room. It became apparent that there are some situations in which users will want to override this and force placement in a Room from a particular RoomGroup, especially an "outside" RoomGroup.
This setting allows the user to specify a preference for Room priority. When set to 0, the setting is ignored and the highest priority Room is chosen.
Although explicit portals did a check to detect internal portals, this check was missing from autolinked portals. This meant they were incorrectly clipping the room bounds of the enclosing outer room.
This PR adds a check for internal rooms during the autolinking and sets the internal flag where needed.
The default portal margin is stored in the RoomManager. Previously this was propagated to Portals when the value was changed, and Portals each stored this default value.
This caused a bug during loading, if the RoomManager was loaded before Portals, the value was never propagated.
This PR makes the default margin a static value stored in the RoomManager, and the Portals now read directly from the static value when required, and do not store locally. This gets around the problem.
Higher values will make indirect lighting brighter.
A value of 1.0 represents physically accurate behavior, but higher values
can be used to make indirect lighting propagate more visibly when using
a low number of bounces.
This can be used to speed up bake times by lowering the number of bounces
then increasing the bounce indirect energy. Unlike BakedLightmapData's
energy property, this property does not affect direct lighting
emitted by light nodes or emissive materials.
Due to an oversight in the autoplace recursive search for static objects, static objects were getting added twice to the portal renderer, which meant they were being rendered twice, lowering performance.
This PR corrects this horrendous error.
Allows users to have the RoomManager as the roomlist.
Fixes a couple of bugs dealing with situations where users attempt to link Portals to Rooms outside the roomlist.
Adds a PortalEditorPlugin allowing you to flip individual portals.
In order to make level building easier, the system can now support STATIC and DYNAMIC objects in the roomlist that are not placed in rooms. The system will automatically place them in the appropriate room.
* Safe and unsafe motion are calculated by dichotomy with a limited
number of steps. It's good for performance, but on long motions that
either collide near the beginning or near the end, the result can be
very imprecise.
* Now a factor 0.25 or 0.75 is used to converge faster when this case
happens, which allows longer motions to get more accurate collision
detection.
* Makes snap collision more precise, and helps with cases where diagonal collision on the border of a platform can lead to the character being stuck.
Additional improvements to move_and_slide:
* Handle slide canceling in move_and_collide with 0 velocity instead of
not applying it.
* Better handling of snap with custom logic to cancel sliding.
* Remove small jittering when using stop on slope, by canceling the
motion completely when the resulting motion is less than margin instead
of always projecting to the up direction (in both body motion and snap).
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
- Specular can now be set above 1.0.
- Some properties now allow more precise values.
- The Bake Mode property hint was changed to be more descriptive.
- The maximum shadow bias values were adjusted to follow the property
hints in `master`.
It turned out the new autolinking feature was linking portals AFTER the static meshes had been added to rooms in the PortalRenderer. This meant that large meshes weren't being sprawled across these portals. The fix involves doing the autolinking BEFORE adding the static meshes.
Fixes a bug in the warning for portals being in the wrong direction, they should have only been checkout for outgoing portals. This was resulting in erroneous warnings.
Also the room conversion logs are refined to be more compact and informative.
A warning icon is also added in the gizmo for portals where autolink fails.
Fixing by applying the movement in two steps, first the platform
movement, and then the body movement. Plus, add the platform movement
when we are on_wall.
When BlendSpace2D switches animations, it will now correctly
calculate the previous animation position and length and
apply is to the new animation.
(cherry picked from commit bcb1e2b79f)
This prevents setting too large values and crashing the editor.
Very low values are also no longer allowed since they are generally
not detailed enough to represent complex gradients, leading to confusion.
(cherry picked from commit 2c7813385d)
When appending text (either via `set_text()` or by pasting from clipboard),
if the input would make the `LineEdit` exceed its configured `max_length`,
the input text is truncated to fit. The discard part is passed as a parameter
in the `text_change_rejected` signal.
Fixes#33321.
Fixes#41278.
Also cleaned up unimplemented `max_chars` property in `TextEdit`.
Co-authored-by: Tony-Goat <70238376+Tony-Goat@users.noreply.github.com>
(cherry picked from commit 9a1ce8e6c3)
Clean: remove duplicate and interior vertices (uses Bullet algorithm)
Simplify: modify the geometry for further simplification (uses VHACD
algorithm)
In the editor, single convex hull now uses the clean option.
Added a new editor entry to create a simplified convex hull, can be
useful for creating convex hull from highly tessellated triangle meshes.
Specific change for 3.x:
Add support for Vector<Vector3> and PoolVector<Vector3> in the convex hull generator.
The situation when multiple current Camera2Ds were in the scene was not dealt with. This could leave several cameras with their current bool set, and each competing to update the viewport scroll, in a random / accidental fashion.
This PR standardises the rule that the most recent current Camera2D added to the scene tree takes over the current status, and sets all other current cameras in the scene tree to non-current. This makes the bools correct, and also prevents the competition over viewport scroll.
The CylinderMesh generation code handles this special case and
avoids generating the top and bottom faces if their radius is equal
to 0. This improves performance by reducing the number of vertices
to draw.
If both values are set to 0, nothing will be visible but the mesh
generation will still succeed.
This also improves the CylinderMesh class documentation.
(cherry picked from commit b4ed84ba2b)
Regression fix: update_exports is tool only and should be used only in
the editor, otherwise it can cause export variable overrides from
instances to be discarded in favor of the parent's value.
(cherry picked from commit f1587c8a7d)
This is an older, easier to implement variant of CAS as a pure
fragment shader. It doesn't support upscaling, but we won't make
use of it (at least for now).
The sharpening intensity can be adjusted on a per-Viewport basis.
For the root viewport, it can be adjusted in the Project Settings.
Since `textureLodOffset()` isn't available in GLES2, there is no
way to support contrast-adaptive sharpening in GLES2.
A value of 0 rings is valid and results in a non-subdivided cylinder.
Compared to the previous lowest allowed value (1), a value of 0 halves
the triangle count in any cylinder.
This backports the improved RayCast debug drawing functionality
from the `master` branch.
`ArrayMesh.clear_surfaces()` was also backported from the `master`
branch and exposed because the new debug drawing code requires it.
Low zoom values result in unreadable text, but it can still be
useful for previewing purposes.
Eventually, characters could be replaced by rectangles at very low
zoom levels to improve the visual appearance.
(cherry picked from commit 74c584472c)
The default value is 80. The hard line length guideline's default column
has been moved to 100 to account for the new soft line length guideline.
It can be disabled by setting its value to the same column as the
hard line length guideline.
1. Backport sub-resource cache fixes from master.
Uses a cache by index to keep sub resource indices consistent.
2. The subindex within Resource wasn't synchronized with the path stored in cache when saving a packed scene. It could cause
sub-resources to be swapped when loading the same packed scene in
the same session.
Now the subindex in Resource reflects the sub-resource path in cache,
making saving and loading sub-resources consistent.
Co-authored-by: latorril <latorril@gmail.com>
Calculating the width for 100 items takes a millisecond in
a debug build on an i7-6700K. It's likely that the editor can remain
smooth even with 1,000 items, especially in a release build.
Although the visibility enabler worked to turn on and off AnimationPlayer as it enters and exits the view frustum, this was of little use as bones animation and especially software skinning still take place driven by the AnimationTree node.
This PR adds the ability to turn on and off AnimationTree, and AnimationTreePlayer nodes as they enter or exit the view frustum, which achieves the intention of switching off expensive animation processing.
DynamicFont kerning was removed in
a9b7843dca.
This readds kerning support and fixes it at the same time.
Co-authored-by: follower <follower@rancidbacon.com>
The new color for screen drawing was chosen to be easier to distinguish
from the 2D viewport limits.
This also makes lines less opaque when the Camera2D has the Current
property enabled. The increased line width is enough to spot the
camera easily, and the increased opacity on top of that felt obnoxious.
(cherry picked from commit 8e2a7fff1d)
The code is based on the current version of thirdparty/vhacd and modified to use Godot's types and code style.
Additional changes:
- backported and extended PagedAllocator to allow leaked objects
- applied patch from https://github.com/bulletphysics/bullet3/pull/3037
This changes the types of a big number of variables.
General rules:
- Using `uint64_t` in general. We also considered `int64_t` but eventually
settled on keeping it unsigned, which is also closer to what one would expect
with `size_t`/`off_t`.
- We only keep `int64_t` for `seek_end` (takes a negative offset from the end)
and for the `Variant` bindings, since `Variant::INT` is `int64_t`. This means
we only need to guard against passing negative values in `core_bind.cpp`.
- Using `uint32_t` integers for concepts not needing such a huge range, like
pages, blocks, etc.
In addition:
- Improve usage of integer types in some related places; namely, `DirAccess`,
core binds.
Note:
- On Windows, `_ftelli64` reports invalid values when using 32-bit MinGW with
version < 8.0. This was an upstream bug fixed in 8.0. It breaks support for
big files on 32-bit Windows builds made with that toolchain. We might add a
workaround.
Fixes#44363.
Fixesgodotengine/godot-proposals#400.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Fix a bug that occour when there are hidden tabs in tab_container.
The visualization isn't correct due to missing values in tab_widths array.
(cherry picked from commit e7e7aa7d12)
Decide whether half offset should be added based on the value used for calculating the return value of this method.
(cherry picked from commit f1420c7cbf)
This commits adds a new emitter type for particles material
and 3D CPU particles. The new emitter is called "ring"
and it can emit either in a ring or cylinder fashion.
This adds the following properties for the emitter:
1. ring_emitter_axis: the axis along which the ring/cylinder
will be constructed
2. ring_emitter_radius: outer radius of the ring/cylinder
3. ring_emitter_inner_radius: inner radius of the cylinder.
when set to zero, particles will emit in the full volume.
4. ring_emitter_height: height of the ring/cylinder emitter.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
As a bonus, to have consistency between use Beziers and create insert tracks, use Beziers also gets a default via editor settings that is used when the confirmation dialog is disabled, instead of just falling back to creating non-Bezier tracks.
Splits the URL into (scheme, host, port, path).
Supports both literal IPv4 and IPv6.
Strip credentials when present (e.g. http://user:pass@example.com/).
Use that function in both HTTPRequest and WebSocketClient.
(cherry picked from commit 3bb40669d5)
Since we clone the environments to build thirdparty code, we don't get an
explicit dependency on the build objects produced by that environment.
So when we update thirdparty code, Godot code using it is not necessarily
rebuilt (I think it is for changed headers, but not for changed .c/.cpp files),
which can lead to an invalid compilation output (linking old Godot .o files
with a newer, potentially ABI breaking version of thirdparty code).
This was only seen as really problematic with bullet updates (leading to
crashes when rebuilding Godot after a bullet update without cleaning .o files),
but it's safer to fix it everywhere, even if it's a LOT of hacky boilerplate.
(cherry picked from commit c7b53c03ae)
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Backport of #48239.
Fix for a regression from software skinning support:
instance_attach_skeleton wasn't called in set_mesh before, and it's
causing issues when the mesh instance is loaded from a thread.
1. Call from a thread queues instance_attach_skeleton with RID() in the
visual server.
2. Call from the main thread when entering tree calls
instance_attach_skeleton immediately with a valid skeleton
3. Queued instance_attach_skeleton resets the attached skeleton
This change prevents that to happen by making sure
instance_attach_skeleton is not called on set_mesh as it was doing
before, but there might be a more general problem to solve in how
visual server commands are executed when resources are loaded from
a different thread.
* Better handling of the scene's environment energy in the lightmapper
bakes.
* Fixed a bug where ProceduralSky::get_panorama() returned a reference
instead of a copy.
* Removed includes to Embree's internal header files.
MeshInstance added as child nodes for CollisionObject debug shapes can
be invalidated while deleting the collision object (child nodes are
deleted first), which caused accesses to invalid memory in
shape_owner_remove_shape that lead to random crashes.
Also optimized accesses to shapes to avoid copy-on-write on each
iteration.
Minimap size couldn't be resized back after been resized bigger than GraphEdit cause the grabber was out of GraphEdit.
This commit prevents resizing minimap bigger than GraphEdit and fix this issue.
(cherry picked from commit 045f55ec00)
There was a specific case where the node path wasn't checked for
validity before trying to access the attachment node.
It could cause lots of error log noise in both editor and game.
When AnimatedSprite2D::play() was called before SpriteFrames has been initialized, a crach occurred (issue #46013).
Modification : An error message on null check test has been added to prevent crash.
Fix#46013.
(cherry picked from commit 324ab63844)
If the editor was started with --debug-collisions, 3d shapes were
displayed twice, both with the gizmo and debug shapes. Some shapes could
also persist after being removed due to the usage of queue_free() to
destroy the debug shapes.
When creating a Windows folder via a Godot's dialog, the extra spaces are not removed which causes problems with Windows. We now remove leading and trailing whitespace when creating a dir.
(cherry picked from commit c8538153b0)
My mistake when cherry-picking #46699 with f8ee8b1b73,
I forgot to amend the cherry-pick to change 'offsets' back to 'margins' for the 3.2
branch.
Fixes#46979.
- Fix objects with no material being considered as fully transparent by the lightmapper.
- Added "environment_min_light" property: gives artistic control over the shadow color.
- Fixed "Custom Color" environment mode, it was ignored before.
- Added "interior" property to BakedLightmapData: controls whether dynamic capture objects receive environment light or not.
- Automatically update dynamic capture objects when the capture data changes (also works for "energy" which used to require object movement to trigger the update).
- Added "use_in_baked_light" property to GridMap: controls whether the GridMap will be included in BakedLightmap bakes.
- Set "flush zero" and "denormal zero" mode for SSE2 instructions in the Embree raycaster. According to Embree docs it should give a performance improvement.
* Removed the pointers to PhysicalBone in the code, as they were unused.
* Forward ported the SkeletonIK bone scaling fix I made from Godot 3.2 to Godot 4.0.
* Fixed issue where the root bone in the IK chain would not rotate correctly.
* The issue turned out to be the update_chain function being called in solve. This would override the root bone transform incorrectly and that would cause it not to rotate after just a single solve. Removing the update_chain function fixes the issue and based on my testing there are no adverse effects.
* While the old fix on this PR (prior to a force push) required a hack fix, this new fix does not!
* Removed the update_chain function. This change doesn't appear to have any adverse effects in any of the projects I tested (including with animations, Skeleton3D or otherwise, from AnimationPlayer nodes!)
* Fixed issue where the scale of the Skeleton node would change the position of the target, causing it not to work with skeletons that have a global scale of anything but 1.
(cherry picked from commit a622649876)
The logic for internal process and internal physics process in Camera2D was very buggy and convoluted for historical reasons.
This is a cleanup to make the logic simpler and easier to follow.
More work is needed to make sure that those options actually solve users' issues, so we prefer to remove the options for 3.2.4 and revisit for a future release.
If true, collision shapes are shown in the editor and at run-time.
Requires Visible Collision Shapes to be enabled in the Debug menu,
for collision shapes to be visible at run-time.
The problem happened when `ImageTexture::create_from_image` was called
with an empty image. In this situation an RID was allocated despite the
texture being null. The destructor would then crash trying to acess this
null texture.
Fixes#46274
(cherry picked from commit 46218d8c37)
Previously if a disconnect occured while downloading a non recoverable error was displayed. This PR attempts to fix this by making sure `request_completed` signal is emitted with an `STATUS_CONNECTION_ERROR` response code.
(cherry picked from commit 70c39737db)
When one of the bodies exited the tree, the corresponding node path was
reset instead of just resetting the joint from the physics server. That
was causing the node path to be reset on scene switch when one of the
bodies is under the joint in the scene tree.
This fix request_completed being emitted two times, the first with the
result, the second as a failure when retrieving responses served with
read-until-EOF.
(cherry picked from commit d61cd469f1)
The rendering/quality/2d section of project settings is becoming considerably expanded in 3.2.4, and arguably was not the correct place for settings that were not really to do with quality.
3.2.4 is the last sensible opportunity we will have to move these settings, as the only existing one likely to break compatibility in a small way is `pixel_snap`, and given that the whole snapping area is being overhauled we can draw attention to the fact it has changed in the release notes.
Class reference is also updated and slightly improved.
`pixel_snap` is renamed to `gpu_pixel_snap` in the project settings and code to help differentiate from CPU side transform snapping.
Two common problems have emerged as a result of transform snapping:
1) Camera jitter with a camera following a snapped object
2) Pixel gaps between e.g. a platform and a player, where a platform rounds down and a player rounds up
Using round seems to greatly reduce problems due to camera jitter. It also may prove better for pixel gaps because pixel art is often designed on a grid, so whole numbers are too expected, which are unstable with floor().
This fixes a bug where users of the scrollbar had to be very careful
not to move the mouse outside the viewport, otherwise the scrollbar
would drop its drag-action and stop scrolling until clicked again.
The existing behaviour had the side-effect of also dropping the
cosmetic highlighting of the scrollbar (in addition to the dragging),
for the specific case where the mouse was move outside the window.
The previous behaviour did nothing to remove the highlight if the
mouse was released (but not moved) inside the viewport.
This separate issue with the lingering highlight of the scrollbar
(until a mouse-movement action is performed inside the viewport) is
fixed in an immediate followup to this commit.
Closes bug #39634
(cherry picked from commit 44657db3e2)
This reverts commit a8105d73c7.
We need to improve the logic somewhat to make the warning more specific to
actual problematic scenarios. Will likely be cherry-picked again + fixes
for the next release.
Fixes#46376.
- Mention the origin of the `get_node()` call.
- Mention whether the attempted path is absolute or relative.
See #46214.
(cherry picked from commit e6abdc943d)
Hugo Locurcio
fabriceci
Rémi Verschelde
QbieShay
Yuri Sizov
Hendrik Brucker
Fredia Huya-Kouadio
Cory Petkovsek
Rémi Verschelde
Anilforextra
Melissa Geels
Paulb23
Jason Knight
Morris Tabor
Haoyu Qiu
clayjohn
PouleyKetchoupp
lawnjelly
Raul Santos
kleonc
foxydevloper
vitika9
Marcel Admiraal
Omar El Sheikh
Aaron Franke
Tomasz Chabora
Eric M
bowling-allie
voxelv
JestemStefan
Francois Belair
Michael Alexsander
Eric
JFonS
trollodel
Pedro J. Estébanez
floppyhammer
Rafał Mikrut
azagaya
megalobyte
Fabio Alessandrelli
Leonardo Christino
Lightning_A
Lynx
amor
TwistedTwigleg
phil-shenk
Sonoracpp
John Wigg
Brennen Green
Will Whitty
Eoin O'Neill
Tokage
besh81
Gilles Roudière
rafallus
Koala
MaxStgs
David Hoppenbrouwers
univeous
Lyuma
asheraryam
Johannes
ray90514
smix8
Yuri Roubinsky
bruvzg
Kevin Smith
volzhs
Bastiaan Olij
lupoDharkael
Nathan Franke
jmb462
Justin Ho
Crystal Melting Dot
Kongfa Waroros
Pop0p
abaire
sps1112
Angad Kambli
janglee
Pedro Rodrigues
Zak
Eryk Dwornicki
Mateo Kuruk Miccino
Delf Neumärker
hilfazer
Meriipu
Emmanuel Leblond
Jummit
Christoffer Sundbom
nc