Due to the port to Vulkan and complete redesign of the rendering backend,
the `drivers/gles3` code is no longer usable in this state and is not
planned to be ported to the new architecture.
The GLES2 backend is kept (while still disabled and non-working) as it
will eventually be ported to serve as the low-end renderer for Godot 4.0.
Some GLES3 features might be selectively ported to the updated GLES2
backend if there's a need for them, and extensions we can use for that.
So long, OpenGL driver bugs!
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
This should speed up rendering slightly. While the project manager
is hardly demanding, this may help on high refresh-rate displays
or very slow machines.
This is needed as C# may free resources from the finalizer thread during
CSharpLanguage::finish(). Previously this would result in RIDs not being freed.
This option is meant to use together with `--path` or from a project
folder. Otherwise the project manager is opened and the option triggers
a crash.
Fixes#25589.
The previous behavior relying on the provided extension was problematic
on macOS since .zip is the main extension used for the full project
export (binary + data pack).
We add a dedicated `--export-pack` command line option to define when
only the data pack should be exported. Its extension will still be
inferred from the path.
Fixes#23073.
I'm barely scratching the surface of the changes needed to make the
--export command line interface easy to use, but this should already
improve things somewhat.
- Streamline `can_export()` templates check in all platforms, checking
first for the presence of official templates, then of any defined
custom template, and reporting on the absence of any.
Shouldn't change the actual return value much which is still true if
either release or debug is usable - we might want to change that
eventually and better validate against the requested target.
- Fix discrepancy between platforms using `custom_package/debug` and
`custom_template/debug` (resp. `release`).
All now use `custom_template`, which will break compatibility for
`export_presets.cfg` with earlier projects (but is easy to fix).
- Use `can_export()` when attempting a command line export and report
the same errors that would be shown in the editor.
- Improve error reporting after a failed export attempt, handling
missing template and invalid path more gracefully.
- Cleanup of unused stuff in EditorNode around the export workflow.
- Improve --export documentation in --help a bit.
Fixes#16949 (at least many of the misunderstandings listed there).
Fixes#18470.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
It was previously mentioning only one of the two required arguments.
This also mentions that the export path is relative to the project
directory.
This partially addresses #28646.
On iOS devices without a physical home button iOS
shows a home indicator instead. This is often in the
way of the UI or the game.
Added a project setting to disable hidden home indicator.
The default value is to hide the home indicator
This change allows error messages to be printed in the editor debugger when the game fails on load, instead of displaying them in the console terminal only.
Implemented uniform API in Viewport class to override 2D and/or
3D camera.
Added buttons in 2D and 3D editor viewport toolbars that override
the running game camera transform with the editor viewport camera
transform. Implemented via remote debugger protocol and camera
override API.
Removed LiveEditFuncs function pointers from ScriptDebugger class.
Since the debugger got access to the SceneTree instance (if one
exists), there is no need to store the function pointers. The live
edit functions in SceneTree are used directly instead. Also removed
the static version of live edit functions in SceneTree for the same
reason. This reduced the SceneTree -> Debugger coupling too since
the function pointers don't need to be set from SceneTree anymore.
Moved script_debugger_remote.h/cpp from 'core/' to 'scene/debugger/'.
This is because the remote debugger is now using SceneTree directly
and 'core/' classes should not depend on 'scene/' classes.
connect_to_stream now accepts optional parameter to specify which
certificates to trust.
Implement accept_stream (SSL server) with key/cert parameters to specify
the RSA key and X509 certificate resources.
This reproduces the behavior used for printing when using the remote
debugger. The default limit is 100 errors and 100 warnings per second,
which makes it possible to display much more GDScript warnings
before overflowing.
This also adds a "Too many warnings" message, so that warnings
don't look like errors when overflowing anymore.
This closes#21896.
Addresses #30068
This is a prerequisite for allowing proper support for fixed timestep interpolation, exposing the interpolation fraction to the engine, modules and gdscript.
The interpolation fraction is the fraction through the current physics tick at the time of the current frame.
This is an editor setting and its value can also be toggled
using an entry in the Editor toolbar. The console will still
appear briefly when starting the project manager or editor,
as it's still compiled as console application.
Does not impact exported games, which will still run without
console in release and with console in debug mode.
A project setting or export option could be added to disable
it in debug mode if there's demand for it, but that would
greatly reduce the usefulness of debug builds if Windows users
can no longer report error and crash messages.
Fixes#17889.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
It's not necessary, but the vast majority of calls of error macros
do have an ending semicolon, so it's best to be consistent.
Most WARN_DEPRECATED calls did *not* have a semicolon, but there's
no reason for them to be treated differently.
Due to the high number of commits in the Godot repository,
7-character hashes were starting to become occasionally ambiguous.
In contrast, 9-character hashes are currently unambiguous for
all commits.
Also include website URL and make it configurable via version.py
together with the rest of the engine branding.
Add mention to MIT license in --help output.
On high-refresh rate displays, the old default value (8000) effectively
limited redrawing to 125 FPS, no matter whether V-Sync was enabled
or not. The new value limits redrawing to a value slightly above
144 FPS, decreasing input lag and making the editor feel smoother
when using freelook.
60 Hz displays aren't affected by this change when V-Sync is enabled,
since V-Sync will take care of limiting redrawing to 60 FPS.
GLES2 is not designed to be a drop-in replacement for the GLES3 backend,
so the fallback mode has to be used knowingly. It *can* make sense for
simple projects which make sure to handle the differences between both
rendering backends, but most users should stick to one supported backend.
By making it opt-in, we can now use this parameter to define whether to
export ETC textures to Android and iOS when using GLES3 + Fallback.
When using GLES3 without Fallback on Android, set the proper min GLES
version in the AndroidManifest.
Also made the option boolean and renamed it for clarity and to avoid
conflict with the previous String option (which would always evaluate as
"true" otherwise).
Fixes#26569.
It has a big impact on 2D and text rendering performance (cf. #24466)
so the solution seems worse than the bug it aims to work around.
It's now opt-in via "rendering/quality/2d/gles2_use_nvidia_rect_flicker_workaround"
for those who need it and have a simple enough game for the performance
drop not to be an issue.
Fixes#24466.
Previously, an error message would get printed to the console, but this
is problematic in e.g. Windows where a console is not displayed. In the
case of a missing .pck file, the binary would just silently fail. Now,
it shows an alert.
Fixes#21994.
Fixes the following Clang 7 warnings:
```
core/io/marshalls.cpp:872:10: warning: unused variable 'f' [-Wunused-variable]
core/ustring.cpp:1831:2: warning: 'register' storage class specifier is deprecated and incompatible with C++17 [-Wdeprecated-register]
core/ustring.cpp:1832:2: warning: 'register' storage class specifier is deprecated and incompatible with C++17 [-Wdeprecated-register]
drivers/gles3/rasterizer_gles3.cpp:82:24: warning: unused function '_gl_debug_print' [-Wunused-function,34]
main/main.cpp:118:13: warning: unused variable 'auto_build_solutions' [-Wunused-variable]
modules/csg/csg_gizmos.cpp:225:46: warning: 'current' may be used uninitialized in this function [-Wmaybe-uninitialized]
```
Image::load is now issuing warnings (since ef50957) to prevent users
from using it to load images at runtime which would be included in
their exported game.
So we now use ImageLoader explicitly instead for the custom-handled
cases in Main.
Fixes#21072, supersedes #22321.
Note, it will only used by the Editor, not when running the game.
This allows package maintainer to compile Godot to use system installed
certificates when accessing the AssetLib.
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
Previous fix in e8e06b2 worked in most cases but not if you run e.g.
'godot -', where the '-' argument would mean that 'project_manager'
is false and yet that's what will be opened eventually.
This adds a static is_viable() method to all rasterizers which has to be
called before initializing the rasterizer. This allows us to check what
rasterizer to use in OS::initialize together with the GL context
initialization.
This commit also adds a new project setting
"rendering/quality/driver/driver_fallback" which allows the creator of a
project to specify whether or not fallback to GLES2 is allowed. This
setting is ignored for the editor so the editor will always open even if
the project itself cannot run. This will hopefully reduce confusion for
users downloading projects from the internet.
We also no longer crash when GLES3 is not functioning on a platform.
This fixes#15324
-Project/Editor settings now show tooltips properly
-Settings thar require restart now will show a restart warning
-Video driver is now visible all the time, can be changed easily
-Added function to request current video driver
The rasterisers (both GLES3 and GLES2) were calculating their own frame delta time
This fix lets the rasterizers get the frame delta through the draw call
That way any regulations to the frame step from the main script will not cause particle systems to process at a different step than the rest of the Engine.
Remove unused rasterizer storage variable
frame.prev_tick variable were not used anywhere and has been removed
- Adds q/quit option to console debugging
- Adds options (variable_prefix)
- Breaks into debugger with Ctrl-C in local debug mode (Unix/Windows)
- Added option to list all breakpoints
- Fixes add/remove breakpoint bug (invalid path parsing)
- Minor cleanup
- Tool scripts will be executed and can be accessed by plugins.
- Other script languages can implement add/remove_named_global_constant
to make use of this functionality.
Now generating mouse events from touch is optional (on by default) and it's performed by `InputDefault` instead of having each OS abstraction doing it. (*)
The translation algorithm waits for a touch index to be pressed and tracks it translating its events to mouse events until it is raised, while ignoring other pointers.
Furthermore, to avoid an stuck "touch mouse", since not all platforms may report touches raised when the window is unfocused, it checks if touches are still down by the time it's focused again and if so it resets the state of the emulated mouse.
*: In the case of Windows, since it already provides touch-to-mouse translation by itself, "echo" mouse events are filtered out to have it working like the rest.
On X11 a little hack has been needed to avoid a case of a spurious mouse motion event that is generated during touch interaction.
Plus: Improve/fix tracking of current mouse position.
** Summary of changes to settings: **
- `display/window/handheld/emulate_touchscreen` becomes `input/pointing_devices/emulate_touch_from_mouse`
- New setting: `input/pointing_devices/emulate_mouse_from_touch`
Add new class _TimerSync to manage timestep calculations.
The new class handles the decisions about simulation progression
previously handled by main::iteration(). It is fed the current timer
ticks and determines how many physics updates are to be run and what
the delta argument to the _process() functions should be.
The new class tries to keep the number of physics updates per frame as
constant as possible from frame to frame. Ideally, it would be N steps
every render frame, but even with perfectly regular rendering, the
general case is that N or N+1 steps are required per frame, for some
fixed N. The best guess for N is stored in typical_physics_steps.
When determining the number of steps to take, no restrictions are
imposed between the choice of typical_physics_steps and
typical_physics_steps+1 steps. Should more or less steps than that be
required, the accumulated remaining time (as before, stored in
time_accum) needs to surpass its boundaries by some minimal threshold.
Once surpassed, typical_physics_steps is updated to allow the new step
count for future updates.
Care is taken that the modified calculation of the number of physics
steps is not observable from game code that only checks the delta
parameters to the _process and _physics_process functions; in addition
to modifying the number of steps, the _process argument is modified as
well to stay in expected bounds. Extra care is taken that the accumulated
steps still sum up to roughly the real elapsed time, up to a maximum
tolerated difference.
To allow the hysteresis code to work correctly on higher refresh
monitors, the number of typical physics steps is not only recorded and
kept consistent for single render frames, but for groups of them.
Currently, up to 12 frames are grouped that way.
The engine parameter physics_jitter_fix controls both the maximum
tolerated difference between wall clock time and summed up _process
arguments and the threshold for changing typical_physics_steps. It is
given in units of the real physics frame slice 1/physics_fps. Set
physics_jitter_fix to 0 to disable the effects of the new code here.
It starts to be effective against the random physics jitter at around
0.02 to 0.05. at values greater than 1 it starts having ill effects on
the engine's ability to react sensibly to dropped frames and framerate
changes.
Works both for the editor and games.
Projects can still use "debug/settings/stdout/print_fps" to enable it
permanently. The --print-fps option takes precedence (so works even if
the project setting is disabled). That setting is also no longer redefined
on the fly based on the verbose flag, that was a mess.
After 3f8a4cc719 trying to run an
individual scene on a project without a main scene fails. We move the
check until after we've determined whether or not we're trying to run an
individual scene.
We also stop trying to show the project manager if any game pack is
found at all, unless the user explicitly asks for the project manager to
be shown.
The previous logic with VERSION_MKSTRING was a bit unwieldy, so there were
several places hardcoding their own variant of the version string, potentially
with bugs (e.g. forgetting the patch number when defined).
The new logic defines:
- VERSION_BRANCH, the main 'major.minor' version (e.g. 3.1)
- VERSION_NUMBER, which can be 'major.minor' or 'major.minor.patch',
depending on whether the latter is defined (e.g. 3.1.4)
- VERSION_FULL_CONFIG, which contains the version status (e.g. stable)
and the module-specific suffix (e.g. mono)
- VERSION_FULL_BUILD, same as above but with build/reference name
(e.g. official, custom_build, mageia, etc.)
Note: Slight change here, as the previous format had the build name
*before* the module-specific suffix; now it's after
- VERSION_FULL_NAME, same as before, so VERSION_FULL_BUILD prefixed
with "Godot v" for readability
Bugs fixed thanks to that:
- Export templates version matching now properly takes VERSION_PATCH
into account by relying on VERSION_FULL_CONFIG.
- ClassDB hash no longer takes the build name into account, but limits
itself to VERSION_FULL_CONFIG (build name is cosmetic, not relevant
for the API hash).
- Docs XML no longer hardcode the VERSION_STATUS, this was annoying.
- Small cleanup in Windows .rc file thanks to new macros.
The Project Manager should share the same settings as the editor most of the time.
The whole init stuff with Main::setup and Main::start needs a good cleanup though.
Fixes#15199.
The heuristic whether we're in the project manager inside GDMono
didn't work if the project manager was launched by not having any path
to run.
This is fixed now by making a Main::is_project_manager().
This is important for some GDNative bindings and probably for Mono. They
may keep references to audio objects which are freed when they are
unregistered. If AudioServer is already deleted at that point, it causes
segfaults.
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
If a scene is modified and a user closes the editor and selects the "Save
and exit" option in the modal dialog -- the editor crashes. This appears
to be a result of the message queue being memdeleted AFTER visual servers
have been destroyed. Remnant textures handled by the message queue throw a
NRE when their own ~Texture destructors reference the visual servers.
This fixes bugs: #12946 and #12813.
Setting the vsync in the main thread, after the rendering thread starts
and takes the OpenGL context fails, so we need to do that before.
Also, for some reason, the main thread cannot make current the context
anymore.
Fixes#13447
Removes the need for _MKSTR all over the place which has the drawback of
converting _MKSTR(UNKNOWN_DEFINE) to "UKNOWN_DEFINE" instead of throwing
a compilation error.
This makes the interfaces available, without implementation, in other
platforms and the editor, which facilitates documenting platform-exclusive
classes.
Platform-exclusive APIs must be set up in platform/<platform>/api/api.cpp.
Provide noop method-implementations where necessary.
Also setup and document the HTML5 platform's JavaScript singleton.
This field represents if the class is exposed to the scripting API.
The value is 'true' if the class was registered manually ('ClassDB::register_*class()'), otherwise it's false (registered on '_post_initialize').
- Added missing registration of classes that are meant to be exposed.
Previously logging logic was scattered over OS class implementations
with plenty of duplication. Major changes in this commit:
- Extracted logging logic into a separate Logger hierarchy. It allows
easy configuration of logging mechanism depending on compile-time or
run-time configuration.
- Implemented RotatedFileLogger which is usually used with StdLogger,
providing persistency of logs. It is often important to be able to
obtain logs of the game even in production to be able to understand
what happened prior to some problem. On mobile there previously was
no way to obtain the logs aside from having the device connected to
your machine.
- flush() is not performed in release mode for every logged line. It
is only performed for errors.
The changes include work done to ensure that GDNative apps and Nim
integration specifically can run on Android. The changes have been
tested on our WIP game, which uses godot-nim and depends on several
third-party .so libs, and Platformer demo to ensure nothing got broken.
- .so libraries are exported to lib/ folder in .apk, instead of assets/,
because that's where Android expects them to be and it resolves the
library name into "lib/<ABI>/<name>", where <ABI> is the ABI matching
the current device. So we establish the convention that Android .so
files in the project must be located in the folder corresponding to
the ABI they were compiled for.
- Godot callbacks (event handlers) are now called from the same thread
from which Main::iteration is called. It is also what Godot now
considers to be the main thread, because Main::setup is also called
from there. This makes threading on Android more consistent with
other platforms, making the code that depends on Thread::get_main_id
more portable (GDNative has such code).
- Sizes of GDNative API types have been fixed to work on 32-bit
platforms.
Currently we rely on some undefined behavior when Object->cast_to() gets
called with a Null pointer. This used to work fine with GCC < 6 but
newer versions of GCC remove all codepaths in which the this pointer is
Null. However, the non-static cast_to() was supposed to be null safe.
This patch makes cast_to() Null safe and removes the now redundant Null
checks where they existed.
It is explained in this article: https://www.viva64.com/en/b/0226/
- Fixes some single-dash leftovers that were missed in the previous commit
- Reorder the help output for clarity, and document missing options
- Drop obsolete options: --noop, --pack, --editor-scene, --level, --import, --import-script, --no-quit
- Improve error message on malformed arguments and do not display help on error
- Always use long form of arguments when starting a new Godot process from C++, for clarity and easy grepping
- Cleanup obsolete code here and there
- Fixes some single-dash leftovers that were missed in the previous commit
- Reorder the help output for clarity, and document missing options
- Drop obsolete options: --noop, --pack, --editor-scene, --level, --import, --import-script, --no-quit
- Improve error message on malformed arguments and do not display help on error
- Cleanup obsolete code here and there
-Added new 3D stream player node
-Added ability for Area to capture sound from streams
-Added small features in physics to be able to properly guess distance to areas for sound
-Fixed 3D CollisionObject so shapes are added the same as in 2D, directly from children
-Fixed KinematicBody API to make it the same as 2D.
Slimmed down variant from the reverted #8375.
The rationale behind the name change is to give Godot's project file a unique
extension (".godot") that can be registered on the OS to be associated with
the Godot binary (OS registration not implemented here).
This PR also adds the possibility to start the game or editor if launched
with the project.godot passed as argument, which paves the way for allowing
a similar behaviour on a double-click in the OS file manager (code originally
by @Hinsbart).
Closes#6915.
"ALL IS GOOD" was a lie.
In particular, removes verbose "path not recognized" false positive.
The actual logic is to (somewhat naively) check all ResourceFormatLoaders
and to pick the first good match, so no need to warn about the formats
that do not match the type hint.
Objects on the screen were not displayed when the project was played,
because it looked for the values of width and height of menus with old
names (godot 2.1?) For that reason delivered value (0, 0).
Now project files don't have to be named "godot.cfg" anymore, they can have any name so as long as it ends with *.godot.
Also godot will automatically start the editor now if launched with a project file as an argument.
This allows for double-clicking of projects to open them :)
Code-wise this should be complete, but there's still work to do:
- Make a nice icon for godot projects.
- Work on installers/packaging -> register the extension and icon with godot.
- Update the 2.1 to 3.0 exporter.
Tested on linux and windows so far.
Collisions and nav debug are conditionally compiled depending on DEBUG_ENABLED
is_editor_hint() and is_node_being_edited() are compiled only with TOOLS_ENABLED
Every affected method is implemented in the header in case its macro is not present (the getters just returning false and the setters having an empty body) so the compiler can inline and finally no-op-out them as likely as possible.
is_node_being_edited() already showed a similar optimization effort and has been adapted to this change.
Furthermore, and as a consequence, -debugcol and -debugnav will not work on non-debug (strict release) builds.
This can bring a little bit of runtime performance on release and non-tooled builds (less code, so less cycles to spend and maybe more cache friendly).
I can show you the code
Pretty, with proper whitespace
Tell me, coder, now when did
You last write readable code?
I can open your eyes
Make you see your bad indent
Force you to respect the style
The core devs agreed upon
A whole new world
A new fantastic code format
A de facto standard
With some sugar
Enforced with clang-format
A whole new world
A dazzling style we all dreamed of
And when we read it through
It's crystal clear
That now we're in a whole new world of code
The other subfolders of tools/ had already been moved to either
editor/, misc/ or thirdparty/, so the hiding the editor code that
deep was no longer meaningful.
- `certs` and `editor_fonts` go to `thirdparty`
- `dist` and `scripts` go to a new `misc` folder
- `collada` and `doc` go to `tools/editor`
The next step will be to rename `tools/editor` to `editor` directly,
but this will be done at the right time to avoid breaking too many PRs.
The method _generate_serial_child_name is indeed called relatively often
in editor mode, but that commented out code chunk hardly adds to its
slowness (and with the default setting, not at all).
Also did various related code cleanups and simplifications.
-Changed SectionedPropertyEditor to support this
-Renamed Globals singleton to GlobalConfig, makes more sense.
-Changed the logic behind persisten global settings, instead of the persist checkbox, a revert button is now available
That year should bring the long-awaited OpenGL ES 3.0 compatible renderer
with state-of-the-art rendering techniques tuned to work as low as middle
end handheld devices - without compromising with the possibilities given
for higher end desktop games of course. Great times ahead for the Godot
community and the gamers that will play our games!
-Made asset sharing support https
-Many fixes to HTTPRequest
-Added an asset installer dialog
-Visual cleanups to asset sharing tab
-Fixed some issues in ScrollContainer, hope it does not break things
-Asset sharing tab is not visible (hidden on purpose) for now.
