Clean: remove duplicate and interior vertices (uses Bullet algorithm)
Simplify: modify the geometry for further simplification (uses VHACD
algorithm)
In the editor, single convex hull now uses the clean option.
Added a new editor entry to create a simplified convex hull, can be
useful for creating convex hull from highly tessellated triangle meshes.
Previously, only StandardMaterial3D could be defined as an alternative
to ShaderMaterial.
This also reorders the CanvasItemMaterial property hints to follow
alphabetical order (which is enforced by the inspector).
* there is now a more clear distinction between camera_2d and camera_3d functions in the engine code
* simplified camera2d's exported interface - now everything happens directly with the 'current' variable and make_current and clear_current are no longer exposed- there were some situations where calling one instead of set_current would result in incomplete results
* rebased to current godot master
The Optimized shadow depth range was removed in late 2020 in favor
of the Stable shadow depth range, but it still had a (broken) property
that allowed to enable it.
More accurate unsafe motion calculation
* Safe and unsafe motion are calculated by dichotomy with a limited
number of steps. It's good for performance, but on long motions that
either collide near the beginning or near the end, the result can be
very imprecise.
* Now a factor 0.25 or 0.75 is used to converge faster when this case
happens, which allows longer motions to get more accurate collision
detection.
* Makes snap collision more precise, and helps with cases where diagonal collision on the border of a platform can lead to the character being stuck.
Additional improvements to move_and_slide:
* Handle slide canceling in move_and_collide with 0 velocity instead of
not applying it.
* Better handling of snap with custom logic to cancel sliding.
* Remove small jittering when using stop on slope, by canceling the
motion completely when the resulting motion is less than margin instead
of always projecting to the up direction (in both body motion and snap).
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
* Colors were imported as 16BPP (half float)
* Far most common use cases only require 8BPP
* If you need higher data precision, use a custom array, which are supported now.
**WARNING**: 3D Scenes imported in 4.0 no longer compatible with this new format. You need to re-import them (erase them from .godot/import)
* Removed entirely from RenderingServer.
* Replaced by ImmediateMesh resource.
* ImmediateMesh replaces ImmediateGeometry, but could use more optimization in the future.
* Sprite3D and AnimatedSprite3D work again, ported from Godot 3.x (though a lot of work was needed to adapt them to Godot 4).
* RootMotionView works again.
* Polygon3D editor works again.
New property disable_mode to set different behaviors:
Remove: remove from physics simulation
MakeStatic: change body mode to static (doesn't affect area and soft body)
KeepActive: do nothing
Extra change:
Handle disable/enable node state with specific notifications, in order
to differentiate global pause from disabled nodes.
* Functions to convert to/from degrees are all gone. Conversion is done by the editor.
* Use PROPERTY_HINT_ANGLE instead of PROPERTY_HINT_RANGE to edit radian angles in degrees.
* Added possibility to add suffixes to range properties, use "min,max[,step][,suffix:<something>]" example "0,100,1,suffix:m"
* In general, can add suffixes for EditorSpinSlider
Not covered by this PR, will have to be addressed by future ones:
* Ability to switch radians/degrees in the inspector for angle properties (if actually wanted).
* Animations previously made will most likely break, need to add a way to make old ones compatible.
* Only added a "px" suffix to 2D position and a "m" one to 3D position, someone needs to go through the rest of the engine and add all remaining suffixes.
* Likely also need to track down usage of EditorSpinSlider outside properties to add suffixes to it too.
Make sure the direction of the motion is preserved, unless the depth is
higher than the margin, which means the body needs depenetration in any
direction.
Also changed move_and_slide to avoid sliding on the first motion, in
order to avoid issues with unstable position on ground when jumping.
Co-authored-by: fabriceci <fabricecipolla@gmail.com>
* Renames for 2D and 3D
* Class name was confusing, given both 2D and 3D have a "visible" property that is unrelated to actual on-screen visibility.
* New name makes it clear that this is about visibility on screen.
* This is the 3D counterpart to #49632
* Implemented a bit different as 3D works using instancing
After merged, both 2D and 3D classes will most likely be renamed in a separate PR to DisplayNotifier2D/3D.
Renames get_parent_spatial() to get_parent_node3d() and changes its
implementation. Before it was not returning a correct pointer if the
node wasn't added to a SceneTree. Now it uses the same implementation as
CanvasItem, which will be correct even for nodes outside a SceneTree.
This commit adds the following properties to GeometryInstance3D: `visibility_range_begin`,
`visibility_range_begin_margin`, `visibility_range_end`, `visibility_range_end_margin`.
Together they define a range in which the GeometryInstance3D will be visible from the camera,
taking hysteresis into account for state changes. A begin or end value of 0 will be ignored,
so the visibility range can be open-ended in both directions.
This commit also adds the `visibility_parent` property to 'Node3D'.
Which defines the visibility parents of the node and its subtree (until
another parent is defined).
Visual instances with a visibility parent will only be visible when the parent, and all of its
ancestors recursively, are hidden because they are closer to the camera than their respective
`visibility_range_begin` thresholds.
Combining visibility ranges and visibility parents users can set-up a quick HLOD system
that shows high detail meshes when close (i.e buildings, trees) and merged low detail meshes
for far away groups (i.e. cities, woods).
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
CharacterBody has a linear_velocity property to replace the argument in
move_and_slide.
StaticBody handles reporting linear/angular velocity correctly when
kinematic motion is used (in 3D, used in vehicle and navigation).
Safe margin property on CharacterBody only, used as argument in
move_and_collide.
Removed kinematic_safe_margin in 3D physics server, not really useful
and now harmonized with 2D.
Does the same thing as simulate motion from RigidBody in Kinematic mode,
and CharacterBody (previously KinematicBody).
Added support for constant linear/angular velocity with kinematic_motion
in StaticBody, which moves the body in physics.
Updated documentation for StaticBody and CharacterBody to describe their
functionalities more accurately.
MODE_DYNAMIC instead of MODE_RIGID
MODE_DYNAMIC_LOCKED instead of MODE_CHARACTER
No more special case for sleeping behavior for MODE_DYNAMIC_LOCKED
(MODE_CHARACTER was forcing the body not to sleep, which is redundant
with can_sleep and wasn't done in Bullet).
- snap property to replace move_and_slide_with_snap()
- floor_max_angle, stop_on_slope, infinite_inertia, max_slides,
up_direction properties to replace arguments from move_and_slide()
- up direction now defaults to Vector3.UP and Vector2.UP
PhysicsBody now has methods move_and_collide/test_move and needed
properties for these methods: safe margin, locked axes (3D only).
Moved collision_exceptions from StaticBody to PhysicsBody for 3D
(same as 2D, and conforms to documentation).
RigidBody doesn't have test_motion method anymore, it's now redundant
with PhysicsBody.test_move.
-Mesh2D now works
-MultiMesh2D now works
-Polygon2D now works
-Added hooks for processing 2D particles
-Skeleton2D now works
2D particles still not working, but stuff needed for it is now implemented.
This makes it easier to hear sound while setting up the node.
Since this changes the default value, this may break existing projects
slightly.
This also tweaks the Unit Size editor property hint for better usability.
See discussion in #25468.
-Enable the trails and set the length in seconds
-Provide a mesh with a skeleton and a skin
-Or, alternatively use one of the built-in TubeTrailMesh/RibbonTrailMesh
-Works deterministically
-Fixed particle collisions (were broken)
-Not working in 2D yet (that will happen next)
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Added an occlusion culling system with support for static occluder meshes.
It can be enabled via `Project Settings > Rendering > Occlusion Culling > Use Occlusion Culling`.
Occluders are defined via the new `Occluder3D` resource and instanced using the new
`OccluderInstance3D` node. The occluders can also be automatically baked from a
scene using the built-in editor plugin.
- For now everything imports multithreaded by default (should work I guess, let's test).
- Controllable per importer
Early test benchmark. 64 large textures (importing as lossless, _not_ as vram) on a mobile i7, 12 threads:
Importing goes down from 46 to 7 seconds.
For VRAM I will change the logic to use a compressing thread in a subsequent PR, as well as implementing Betsy.
MeshInstance added as child nodes for CollisionObject debug shapes can
be invalidated while deleting the collision object (child nodes are
deleted first), which caused accesses to invalid memory in
shape_owner_remove_shape that lead to random crashes.
Also optimized accesses to shapes to avoid copy-on-write on each
iteration.
There was a specific case where the node path wasn't checked for
validity before trying to access the attachment node.
It could cause lots of error log noise in both editor and game.
- Fixed SoftBody surface update with new rendering system
- Added GodotPhysics implementation for SoftBody
- Added support to get SoftBody rid to interact with the physics server
- Added support to get SoftBody bounds from the physics server
- Removed support for unused get_vertex_position and get_point_offset
from the physics server
- Removed SoftBody properties that are unused in both Bullet and
GodotPhysics (angular and volume stiffness, pose matching)
- Added RenderingServerHandler interface to PhysicsServer3D so the physics servers don't need to reference the class from SoftBody node directly
If the editor was started with --debug-collisions, 3d shapes were
displayed twice, both with the gizmo and debug shapes. Some shapes could
also persist after being removed due to the usage of queue_free() to
destroy the debug shapes.
When one of the bodies exited the tree, the corresponding node path was
reset instead of just resetting the joint from the physics server. That
was causing the node path to be reset on scene switch when one of the
bodies is under the joint in the scene tree.
* Adds both a preview sun and preview environment to the 3D editor.
* They are valid as long as a DirectionalLight3D and WorldEnvironment are not in the scene.
* If any is added to the scene, the respective preview is disabled.
* Changed WorldEnvironment to better handle multiple node versions.
* Added a function in SceneTree to get the first node in a group.
* Fixed button minimum size to also consider font height if no text is there, this broke with the TextSever PR.
Implements https://github.com/godotengine/godot-proposals/issues/1835#issuecomment-727186192
* PauseMode is now ProcessMode, containing the following states:
```
PROCESS_MODE_INHERIT, // same as parent node
PROCESS_MODE_NORMAL, // process only if not paused
PROCESS_MODE_PAUSE_ONLY, // process only if paused
PROCESS_MODE_ALWAYS, // process always
PROCESS_MODE_DISABLED, // never process
```
* NOTIFICATION_PAUSED and NOTIFICATION_UNPAUSED are received effectively when the node is paused and unpaused (not any longer when pause mode is set in SceneTree).
* Renamed some nodes that used ProcessMode/process_mode to specify a callback type to ProcessCallback to avoid clashes.
- Based on C++11's `atomic`
- Reworked `SafeRefCount` (based on the rewrite by @hpvb)
- Replaced free atomic functions by the new `SafeNumeric<T>`
- Replaced wrong cases of `volatile bool` by the new `SafeFlag`
- Platform-specific implementations no longer needed
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
-Advanced Settings toggle also hides advanced properties when disabled
-Simplified Advanced Bar (errors were just plain redundant)
-Reorganized rendering quality settings.
-Reorganized miscelaneous settings for clean up.
-For inspector refresh, the inspector now detects if a property change by polling a few times per second and then does update the control if so. This process is very cheap.
-For property list refresh, a new signal (property_list_changed) was added to Object. _change_notify() is replaced by notify_property_list_changed()
-Changed all objects using the old method to the signal, or just deleted the calls to _change_notify(<property>) since they are unnecesary now.
-Rendering server now uses a split RID allocate/initialize internally, this allows generating RIDs immediately but initialization to happen later on the proper thread (as rendering APIs generally requiere to call on the right thread).
-RenderingServerWrapMT is no more, multithreading is done in RenderingServerDefault.
-Some functions like texture or mesh creation, when renderer supports it, can register and return immediately (so no waiting for server API to flush, and saving staging and command buffer memory).
-3D physics server changed to be made multithread friendly.
-Added PhysicsServer3DWrapMT to use 3D physics server from multiple threads.
-Disablet Bullet (too much effort to make multithread friendly, this needs to be fixed eventually).
-Always use temporal reproject, it just loos way better than any other filter.
-By always using termporal reproject, the shadowmap reduction can be done away with, massively improving performance.
-Disadvantage of temporal reproject is update latency so..
-Made sure a gaussian filter runs in XY after fog, this allows to keep stability and lower latency.
- Based on C++11's `thread` and `thread_local`
- No more need to allocate-deallocate or check for null
- No pointer anymore, just a member variable
- Platform-specific implementations no longer needed (except for the few cases of non-portable functions)
- Simpler for `NO_THREADS`
- Thread ids are now the same across platforms (main is 1; others follow)
-SDFGI direct light is done over many frames
-SDFGI Changed settings for rays/frame
-SDFGI Misc optimizations
-SDFGI Bug fix on probe scroll
-GIProbe was not working, got it to work again
-GIProbe dynamic objects were not working, fixed
-Added a half size GI option.
Fix Raycast3D node render debug not showing in editor camera preview.
Use dynamic mesh update to change the ray on-the-fly without too much
extra cost when collision debug is enabled.
Fixes#43571
This change does two things:
1. Properly update the internal shape data using _update_in_shape_owner
when updating a shape (in 2D it was resetting one way collision)
2. Avoid unnecessary updates when calling set_shape with the same shape,
which happens each time a shape property is modified
(e.g shape.extents.x = ...)
Fixes#45090
Happy new year to the wonderful Godot community!
2020 has been a tough year for most of us personally, but a good year for
Godot development nonetheless with a huge amount of work done towards Godot
4.0 and great improvements backported to the long-lived 3.2 branch.
We've had close to 400 contributors to engine code this year, authoring near
7,000 commit! (And that's only for the `master` branch and for the engine code,
there's a lot more when counting docs, demos and other first-party repos.)
Here's to a great year 2021 for all Godot users 🎆
This makes it possible to view far away objects without
having to tweak any settings. This results in a more usable
editor when working on large-scale levels.
This change should have no impact on performance, but note that
Z-fighting will be visible at a distance. This can be made less
visible by increasing the Znear value (however, doing so will cause
nearby surfaces to disappear).
This change was also applied to the editor, but it will only
apply to newly created scenes.
This also changes the default camera settings in the glTF importer
to match the Camera node's defaults.
-Happens on import by default for all models
-Just works (tm)
-Biasing can be later adjusted per node or per viewport (as well as globally)
-Disabled AABB.get_support test because its broken
See #36285 which mistakenly added documentation for the whole C++ API, while
some of it is meant to be and stay private as it's not exposed to scripts.
The access modifiers and method prefix were not used properly.
Cleanup code, and rename wrong `group_name` parameters to `method`, as it's a
method name which is being broadcast.
This is a very old class from pre-open source days, chances are that it was
just forgotten and not meant to be kept as is and undocumented.
-Changed how mesh data is organized, hoping to make it more efficient on Vulkan and GLES.
-Removed compression, it now always uses the most efficient format.
-Added support for custom arrays (up to 8 custom formats)
-Added support for 8 weights in skeleton data.
-Added a simple optional versioning system for imported assets, to reimport if binary is newer
-Fixes #43979 (I needed to test)
WARNING:
-NOT backwards compatible with previous 4.x-devel, will most likely never be, but it will force reimport scenes due to version change.
-NOT backwards compatible with 3.x scenes, this will be eventually re-added.
-Skeletons not working any longer, will fix in next PR.
See #43689.
Also 'fixed' some spelling for behavior in publicly visible strings.
(Sorry en_GB, en_CA, en_AU, and more... Silicon Valley won the tech spelling
war.)
* Removed the pointers to PhysicalBone in the code, as they were unused.
* Forward ported the SkeletonIK bone scaling fix I made from Godot 3.2 to Godot 4.0.
* Fixed issue where the root bone in the IK chain would not rotate correctly.
* The issue turned out to be the update_chain function being called in solve. This would override the root bone transform incorrectly and that would cause it not to rotate after just a single solve. Removing the update_chain function fixes the issue and based on my testing there are no adverse effects.
* While the old fix on this PR (prior to a force push) required a hack fix, this new fix does not!
* Removed the update_chain function. This change doesn't appear to have any adverse effects in any of the projects I tested (including with animations, Skeleton3D or otherwise, from AnimationPlayer nodes!)
* Fixed issue where the scale of the Skeleton node would change the position of the target, causing it not to work with skeletons that have a global scale of anything but 1.
Changed CPU velocity calculation for EMISSION_SHAPE_DIRECTED_POINTS
to follow the same logic as in the GPU version:
mat2 rotm;
rotm[0] = texelFetch(emission_texture_normal, emission_tex_ofs, 0).xy;
rotm[1] = rotm[0].yx * vec2(1.0, -1.0);
VELOCITY.xy = rotm * VELOCITY.xy;
Now both CPUParticles2D & CPUParticles3D (z disabled) show the same results
as their GPU counterparts and take the initial velocity settings into account.
In general they are more confusing to users because they expect
inheritance to fully override parent methods. This behavior can be
enabled by script writers using a simple super() call.
- Makes all boolean setters/getters consistent.
- Fixes bug where `glow_hdr_bleed_scale` was not used.
- Split CameraEffects to their own source file.
- Reorder all Environment method and properties declarations,
definitions and bindings to be consistent with each other
and with the order of property bindings.
- Bind missing enum values added with SDFGI.
- Remove unused SDFGI enhance_ssr boolean.
- Sync doc changes after SDFGI merge and other misc changes.
* Added helper functions to Skeleton3D for converting transforms from bone space to global space, and vice versa.
* Updated the Skeleton3D class reference.
* Changed the icon used for bones in the Skeleton3D inspector to use BoneAttachement3D's icon.
* Changed the Skeleton3D inspector to use EditorPropertyTransform and EditorPropertyVector3 when possible.
* Placed the Transform/Matrix for each bone in a sub-section, so it is visually similar to the Node3D inspector.
Fixes#36372 as Path2D/Path3D's `curve` property no longer uses a Curve
instance as default value, but instead it gets a (unique) default Curve
instance when created through the editor (CreateDialog).
ClassDB gets a sanity check to ensure that we don't do the same mistake
for other properties in the future, but instead use the dedicated
property usage hint.
Fixes#36372.
Fixes#36650.
Supersedes #36644 and #36656.
Co-authored-by: Thakee Nathees <thakeenathees@gmail.com>
Co-authored-by: simpuid <utkarsh.email@yahoo.com>
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
-Added LocalVector (needed it)
-Added stb_rect_pack (It's pretty cool, we could probably use it for other stuff too)
-Fixes and changes all around the place
-Added library for 128 bits fixed point (required for Delaunay3D)
This reverts commit ec7b481170.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
A vertical FOV of 75 degrees is roughly equivalent to a 91 degree
horizontal FOV on a 4:3 display (~107.51 degrees on 16:9),
which is close to the typical default FOV used in PC games.
Note that this doesn't apply to the in-editor camera which keeps its
FOV to 70. This is because it doesn't display in fullscreen;
its viewport only displays in the center of the editor (roughly).
This means the viewport won't cover the viewer's eyes as much. Therefore,
the editor camera FOV should be slightly lower to account for this.
Since this changes the default value, this may break existing projects
slightly.
For the record, this was already done in
https://github.com/godotengine/godot-demo-projects/pull/260
for the official demo projects.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
Also implemented decal atlas, so projectors and other stuff can be added.
Sidenote: Had to make RID hashable, so some unrelated includes changed
in order to include it in hashfuncs.h
PouleyKetchoupp
Rémi Verschelde
reduz
Hugo Locurcio
Hendrik Brucker
Josh Chandler
Aaron Franke
Lightning_A
jfons
Bastiaan Olij
Yuri Roubinsky
Pedro J. Estébanez
Rémi Verschelde
Marcel Admiraal
Haoyu Qiu
TwistedTwigleg
kobewi
trollodel
JohnM666
kleonc
Rafał Mikrut
smix8
asheraryam
rafallus
Juan Linietsky
smix8
clayjohn
Nathan Franke
Anshul7sp1
Gilles Roudière
Angad Kambli
jmb462
Michael Alexsander
sps1112
Pedro Rodrigues
Eryk Dwornicki
Ellen Poe
Jitesh
hoontee
Kayomn
Oliver Dick
HipsterPenguin
David Hoppenbrouwers
bruvzg
Pawel Lampe
Tokage
Lewis Pollard
Lyuma
Duroxxigar
booer
Jonathan Vice
ConorLPBoyle
George Marques
Andy Maloney
Yerik
Maganty Rushyendra
Adam Reichold
Andrii Doroshenko (Xrayez)
K. S. Ernest (iFire) Lee
Andrea Catania
ArrowInAKnee
Marcus Elg
jitspoe
Sam
qarmin
NutmegStudio
MickeMakaron