- Rename OpenGL to GLES3 in the source code per community feedback.
- The renderer is still exposed as "OpenGL 3" to the user.
- Hide renderer selection dropdown until OpenGL support is more mature.
- The renderer can still be changed in the Project Settings or using
the `--rendering-driver opengl` command line argument.
- Remove commented out exporter code.
- Remove some OpenGL/DisplayServer-related debugging prints.
First implementation with Linux display manager.
- Add single-threaded mode for EditorResourcePreview (needed for OpenGL).
Co-authored-by: clayjohn <claynjohn@gmail.com>
Co-authored-by: Fabio Alessandrelli <fabio.alessandrelli@gmail.com>
Sets `AlignOperands` to `DontAlign`.
`clang-format` developers seem to mostly care about space-based indentation and
every other version of clang-format breaks the bad mismatch of tabs and spaces
that it seems to use for operand alignment. So it's better without, so that it
respects our two-tabs `ContinuationIndentWidth`.
Fixes the SHADOW_CASTING_SETTING_OFF setting in
GeometryInstance3D and the "shadows_disabled" render
mode in spatial materials, which were not working
before.
The built-in ALPHA in spatial shaders comes pre-set with a per-instance
transparency value. Multiply by it if you want to keep it.
The transparency value of any given GeometryInstance3D is affected by:
- Its new "transparency" property.
- Its own visiblity range when the new "visibility_range_fade_mode"
property is set to "Self".
- Its parent visibility range when the parent's fade mode is
set to "Dependencies".
The "Self" mode will fade-out the instance when reaching the visibility
range limits, while the "Dependencies" mode will fade-in its
dependencies.
Per-instance transparency is only implemented in the forward clustered
renderer, support for mobile should be added in the future.
Co-authored-by: reduz <reduzio@gmail.com>
This can be used to improve 3D shadow rendering quality at little
performance cost. Unlike the existing Hard setting which is limited
to variable shadow blur only, it works with both fixed blur and
variable blur.
This allows for finer control over 3D rendering resolution.
Supersampling can also be performed by setting a 3D rendering
resolution above 1.0, which is useful for offline rendering or
for very high-end GPUs.
This property was intended to provide a way to have SSAO or VoxelGI
ambient occlusion with a color other than black. However, it was
dropped during the Vulkan renderer development due to the performance
overhead it caused when the feature wasn't used.
Add glTF2 uri decode for paths.
Add vertex custom apis.
Add scene importer api.
Change Color to float; add support for float-based custom channels in SurfaceTool and EditorSceneImporterMesh
Co-authored-by: darth negative hunter
<thenegativehunter2@users.noreply.github.com>
In the `master` branch, 16× MSAA caused the entire system to freeze
on NVIDIA GPUs. This is likely caused by graphics drivers not actually
implementing 16× MSAA, but combining 8× MSAA with 2× SSAA instead.
On top of that, modern shader complexity makes 16× MSAA very difficult
to use while keeping a good framerate. 8× MSAA is hard enough to use
as it is.
OmniLight3D:
* Fixed lack of precision in cube map mode by scaling the projection's
znear.
* Fixed aliasing issues by making the paraboloids use two square regions instead of two half
squares.
* Fixed shadowmap atlas bleeding by adding padding.
* Fixed sihadow blur's inconsistent radius and unclamped sampling.
SpotLight3D:
* Fixed lack of precision by scaling the projection's znear.
* Fixed normal biasing.
Both:
* Tweaked biasing to make sure it works out of the box in most situations.
When a shader error is printed about a built-in shader, the origin
of the shader will now be recognizable immediately by looking at
the top of the printed shader code.
* Make sure shaders are named, to aid in debug in case of failure
* SceneRenderRD was being wrongly initialized (virtual functions being called when derivative class not initialized).
* Fixed some bugs resulting on the above being corrected.
The "Use Parent Material" option now does something when enabled on a CanvasItem. As before, it's not just limited to a node's direct parent but can move up the tree until it finds a material.
Also corrected a typo in rendering_device_vulkan.h that didn't merit its own commit.
* Specialization constants used to disable anything not needed to draw
* Added softshadow and projector support on mobile.
This new approach ensures mobile shaders are smaller and more efficient, but relies on more pipeline versions compiled on demand.
As a result, random stalls can ocur like in Godot 3.x. These will be solved by using background compilation and fallbacks eventually (but needs to be tested first).
The project setting wasn't being used anywhere.
This also tweaks the property hints to denote that these properties
are only effective after a restart.
* Only apply final actions to attachments used in the last pass.
* Fixes to draw list final action (was using continue instead of read/drop).
* Profiling regions inside draw lists now properly throw errors.
* Ability to enable gpu profile printing from project settings. (used to debug).
* Simplified code a lot, bias based on normalized cascade size.
* Lets scale cascades, max distance, etc. without creating acne.
* Fixed normal biasing in directional shadows.
I removed normal biasing in both omni and spot shadows, since the technique can't be easily implemented there.
Will need to be replaced by something else.
* Added an extra stage before compiling shader, which is generating a binary blob.
* On Vulkan, this allows caching the SPIRV reflection information, which is expensive to parse.
* On other (future) RenderingDevices, it allows caching converted binary data, such as DXIL or MSL.
This PR makes the shader cache include the reflection information, hence editor startup times are significantly improved.
I tested this well and it appears to work, and I added a lot of consistency checks, but because it includes writing and reading binary information, rare bugs may pop up, so be aware.
There was not much of a choice for storing the reflection information, given shaders can be a lot, take a lot of space and take time to parse.
Found via `codespell -q 3 -S ./thirdparty,*.po,./DONORS.md -L ackward,ang,ans,ba,beng,cas,childs,childrens,dof,doubleclick,fave,findn,hist,inout,leapyear,lod,nd,numer,ois,ony,paket,seeked,sinc,switchs,te,uint`
* Shadow quality settings now specialization constant.
* Decal and light projector filters can be set.
* Changing those settings forces re-creation of the pipelines.
These changes should help improve performance related to shadow mapping, and allows improving performance by sacrificing decal and light projector quality.
* Added a new macro SNAME() that constructs and caches a local stringname.
* Subsequent usages use the cached version.
* Since these use a global static variable, a second refcounter of static usages need to be kept for cleanup time.
* Replaced all theme usages by this new macro.
* Replace all signal emission usages by this new macro.
* Replace all call_deferred usages by this new macro.
This is part of ongoing work to optimize GUI and the editor.
* use valid format for framebuffer: VK_FORMAT_A2B10G10R10_UNORM_PACK32
* Unfortunately cant be used for compute.
* Mobile will need to do refprobe, sky, mipmapblurring using raster.
* Keep track of when projector, softshadow or directional sofshadow were enabled.
* Enable them via specializaton constant where it makes sense.
* Re-implements soft shadows.
* Re-implements light projectors.
* Added support to our local copy of SpirV Reflect (which does not support it).
* Pass them on render or compute pipeline creation.
* Not implemented in our shaders yet.
* IF a texture was reimported (calling replace as an example), it would invalidate all materials using it, causing plenty of errors.
* Added the possibility to get a notification when a uniform set is erased.
* With this notification, materials can be queued for update properly.
* Implements the code to show the boot splash on load using RenderingDevice
* Does not work on X11 when maximized, some platform specific hack will be needed there.
* Fixed and redone the process to obtain render information from a viewport
* Some stats, such as material changes are too difficult to guess on Vulkan, were removed.
* Separated visible and shadow stats, which causes confusion.
* Texture, buffer and general video memory can be queried now.
* Fixed the performance metrics too.
The Optimized shadow depth range was removed in late 2020 in favor
of the Stable shadow depth range, but it still had a (broken) property
that allowed to enable it.
* Colors were imported as 16BPP (half float)
* Far most common use cases only require 8BPP
* If you need higher data precision, use a custom array, which are supported now.
**WARNING**: 3D Scenes imported in 4.0 no longer compatible with this new format. You need to re-import them (erase them from .godot/import)
* Removed entirely from RenderingServer.
* Replaced by ImmediateMesh resource.
* ImmediateMesh replaces ImmediateGeometry, but could use more optimization in the future.
* Sprite3D and AnimatedSprite3D work again, ported from Godot 3.x (though a lot of work was needed to adapt them to Godot 4).
* RootMotionView works again.
* Polygon3D editor works again.
* Editor 2D viewport now uses embedded subwindows (windows no longer pop up)
* Restored the ability to disable 3D on the 2D viewport (makes 3D not display on 2D when there is a camera on the scene)
* Ability to allocate empty objects in RID_Owner, so RID_PtrOwner is not needed in most cases.
* Improves cache usage, as objects are now allocated together
* Should improve performance in 2D rendering
* Added a function to ignore subsequent commands if they don't fall within the slice.
* This will be used by the new TileMap to properly provide animated tiles.
* This is the 3D counterpart to #49632
* Implemented a bit different as 3D works using instancing
After merged, both 2D and 3D classes will most likely be renamed in a separate PR to DisplayNotifier2D/3D.
* Works from RenderinServer
* Accurately tells when on or off-scren, its no longer approximate.
* VisibilityEnabler also simplified to use the process mode instead.
This commit adds the following properties to GeometryInstance3D: `visibility_range_begin`,
`visibility_range_begin_margin`, `visibility_range_end`, `visibility_range_end_margin`.
Together they define a range in which the GeometryInstance3D will be visible from the camera,
taking hysteresis into account for state changes. A begin or end value of 0 will be ignored,
so the visibility range can be open-ended in both directions.
This commit also adds the `visibility_parent` property to 'Node3D'.
Which defines the visibility parents of the node and its subtree (until
another parent is defined).
Visual instances with a visibility parent will only be visible when the parent, and all of its
ancestors recursively, are hidden because they are closer to the camera than their respective
`visibility_range_begin` thresholds.
Combining visibility ranges and visibility parents users can set-up a quick HLOD system
that shows high detail meshes when close (i.e buildings, trees) and merged low detail meshes
for far away groups (i.e. cities, woods).
* RingBuffer had no reason to be in this context
* A single buffer is used that can grow as much as the game needs.
This should make thread loading entirely reliable.
* GIProbe is now VoxelGI
* BakedLightmap is now LightmapGI
As godot adds more ways to provide GI (as an example, SDFGI in 4.0), the different techniques (which have different pros/cons) need to be properly named to avoid confusion.
YSort now has a compatibility alias to Node2D.
Updated TileMap to use the existing Node2D y_sort_enabled property instead
of its own property.
Updated Node2D doc to include the new y_sort_enabled member.
Updated TileMap doc to remove its mention of cell_y_sort.
Deleted YSort doc.
* Shader compilation is now cached. Subsequent loads take less than a millisecond.
* Improved game, editor and project manager startup time.
* Editor uses .godot/shader_cache to store shaders.
* Game uses user://shader_cache
* Project manager uses $config_dir/shader_cache
* Options to tweak shader caching in project settings.
* Editor path configuration moved from EditorSettings to new class, EditorPaths, so it can be available early on (before shaders are compiled).
* Reworked ShaderCompilerRD to ensure deterministic shader code creation (else shader may change and cache will be invalidated).
* Added shader compression with SMOLV: https://github.com/aras-p/smol-v
It turns out the calculation of the bounding rect for canvas items has a nasty bug. When a transform is applied (especially in a custom draw), in the renderer this extra matrix is applied to all later commands in the canvas item. However in the calculation of the bound, the transform is only applied to the first command following the transform.
This PR fixes this inconsistency.
-Mesh2D now works
-MultiMesh2D now works
-Polygon2D now works
-Added hooks for processing 2D particles
-Skeleton2D now works
2D particles still not working, but stuff needed for it is now implemented.
Various fixes to UV2 unwrapping and the GPU lightmapper. Listed here for
context in case of git blame/bisect:
* Fix UV2 unwrapping on import, also cleaned up the unwrap cache code.
* Fix saving of RGBA images in EXR format.
* Fixes to the GPU lightmapper:
- Added padding between atlas elements, avoids bleeding.
- Remove old SDF generation code.
- Fix baked attenuation for Omni/Spot lights.
- Fix baking of material properties onto UV2 (wireframe was
wrongly used before).
- Disable statically baked lights for objects that have a
lightmap texture to avoid applying the same light twice.
- Fix lightmap pairing in RendererSceneCull.
- Fix UV2 array generated from `RenderingServer::mesh_surface_get_arrays()`.
- Port autoexposure fix for OIDN from 3.x.
- Save debug textures as EXR when using floating point format.
-Enable the trails and set the length in seconds
-Provide a mesh with a skeleton and a skin
-Or, alternatively use one of the built-in TubeTrailMesh/RibbonTrailMesh
-Works deterministically
-Fixed particle collisions (were broken)
-Not working in 2D yet (that will happen next)
We've been using standard C library functions `memcpy`/`memset` for these since
2016 with 67f65f6639.
There was still the possibility for third-party platform ports to override the
definitions with a custom header, but this doesn't seem useful anymore.
Added an occlusion culling system with support for static occluder meshes.
It can be enabled via `Project Settings > Rendering > Occlusion Culling > Use Occlusion Culling`.
Occluders are defined via the new `Occluder3D` resource and instanced using the new
`OccluderInstance3D` node. The occluders can also be automatically baked from a
scene using the built-in editor plugin.
* Particle shaders now have start() and process()
* Particle collision happens between them.
* The RESTART property is kept, so porting an old shader is still possible.
This fixes the problem of particle collisions not functioning on the first particle frame.
-Used a more consistent set of keywords for the shader
-Remove all harcoded entry points
-Re-wrote the GLSL shader parser, new system is more flexible. Allows any entry point organization.
-Entry point for sky shaders is now sky().
-Entry point for particle shaders is now process().
SeleckyErik
Rémi Verschelde
M. Huri
Clay John
Brian Semrau
jfons
Hugo Locurcio
lawnjelly
Yuri Roubinsky
Rémi Verschelde
Robin Arys
Haoyu Qiu
Bastiaan Olij
mennomax
Gilles Roudière
Aaron Franke
Lightning_A
Manuel Dun
Hendrik Brucker
CaptainProton42
Anilforextra
JFonS
Lyuma
Juan Linietsky
Endri Lauson
Daniel Doran
Paulb23
K. S. Ernest (iFire) Lee
bruvzg
Max Hilbrunner
Michael Alexsander
Duarte David
TechnoPorg
floppyhammer
Nathan Franke
George Marques
Rafał Mikrut
vitika9
Nicholas Huelin
luz paz
Yuri Sizov
TaskManagerCZ
Kodi
Paweł Fertyk
Pedro J. Estébanez
andriyDev
Marcel Admiraal
Fabio Alessandrelli
Joosep Jääger
Winston Hartnett
Dennis Brakhane